- Pins and bushings are precision-machined, induction-hardened, and sealed from abrasives.
- Track links are forged from a special boron-steel alloy and deepinduction-hardened.
- Front idlers are induction-hardened on the tread for a long life.
- Carrier rollers are induction-hardened.
- Specification
Overall Length : 98.3~147.8 inch
Track Height : 24.4~28.7 inch
Sprocket Pitch Diameter : 18~23 inch
Carriage Weight : 3,042~4,630 lb
Excavator Dumper : 12,125~29,762 lb
Drill Rig with Outrigger : 19,400~47,620 lb
Final Drive Torque : 5,618~13,347 lbf.ft
Travel Speed : 2.1~5.3 kmf.hour
Vibrating Screen is also called Vibratory Screen,Vibrosieve, Screen, Circular Vibration Screens, Sieve, Sieving Eequipment, shaking screen, Inclined Screen,Circular Vibrating Screen,Vibrating Riddle, Screen Machine.
For Vibrating Screen, the amplitude can be adjusted. It is of long screening line, multi-layers screen, correct to screen in all kinds of specification ,high efficiency in screening, so widely used in mine selection and sand stone crushing.
Sand Washing Machine is also called Sand Washer, Washing Machine, Wash Equipment, Sand Gravel Washer , Sand Cleaning Machine, Sand Washing Equipment, Sand Cleaning Equipment.
XSD series High-efficient Sand Washing Machine, which is used for washing away the stone power and impurity in the sand made by the Sand Making Machine, to increase the sand quality, is a necessary equipment to wash sand in coordination with the sand making machine.
XSD series high-efficient Sand Washing Machine, on basis of the practices in sand and stone industry, designed by our professionals. This series product possesses the good qualities that high cleaning, reasonable structure, high capacity, energy saving, low sand loss. The special design for the transmission part separating with water and sand enables its low maintenance. It is the best choice for our customers.
It is always used in washing, grading and dehydrating quartz and sand in Construction Site. Sand stone Factories, Hydropower Station and Concrete Dam Site, Pre cast Concrete Factory, Glass Factory and etc.
By the Vibrating feeder, the material will be fed evenly and continuously into the room of the Storage Bin to grind. In the production line, the Vibrating Feeder can evenly feed the crushing material, and complete the primary screening.
Vibrating Feeder features its own superiorities: stationary vibration, reliable operation, long time service life. The vibrating force can be adjusted, and the flux can be randomly changed and controlled, very convenient to control. The vibration force is the source of vibrating motor. It is of low noise, low energy consumption, good performance. Vibrating feeder is of simplicity in structure, reliability in operation, convenience in adjustment, light in weight, small in size, convenience in maintenance. The dust contamination can be prevented when the closed structure is adopted.
Detailed Product Description:
Ball mill is widely used for milling various kinds of ores or rocks in metal and non-metal mining and building material industry.The main bearing of the ball mill with the shell diameter 900-2100mm is spherical liner bearing; for the shell diameter 2700mm,the main bearing is completely closed self-aligning 120,bearing withBabbitt alloy of high lead and low tin with low hardness,underneath laid withcooling copper piping full of water The bearing is of static pressure structurewith high and low pressure united oil lubricating system.
Our Ball Mill is the key equipment for grinding after the crush process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other materials able to grind.
The Ball mill Model: §¶1830*3000,§¶1830*6400,§¶1830*7000,§¶2200*5500,§¶2200*6500,§¶2200*7500
Weight of ball mill:11£¬23£¬25,30,30,23.
SCM series S super thin mill is also called Micronizer , Industrial Mill, Micron Grinding Mill ,Micron Grinding Mill £¬Ultrafine Mill, Micro Powder Mill which is a kind of Mill, Grinder, Grinding Mill, Milling Machine.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden, SCM Series S Micro-power Grinding Mill .the latest industrial micro-power grinding mill, is a new type grinding machine for producing micro-power.
SCM series S super thin mill can grind calcite,limestone,calcite,dolomite,kaolin,bentonite,talc,illite,pyrophillite,barite,meerschaum,fluorite,potash ore and other more than 200 kinds of material that Moh's hardness is blow 9,non-explosive,non-flammable minerals.
Model : SCM6015 , SCM8021 , SCM10027
Roller number: 15, 21, 27
Diameter (mm) : ¦µ600, ¦µ800 , ¦µ1000
Ring number:1¡Á3,1¡Á3,1¡Á3
Main unit speed(mm):235,235,173
Max. feeding size(mm):10, 10, 20
Final size (mesh): 325-2500, 325-2500, 325-2500
Capacity (kg/h): 325-2500, 600-4000, 900-6800
Overall dimension (m): 10¡Á2.3¡Á5.5, 13¡Á3¡Á5.8, 18¡Á4¡Á8.6.
Efficient crushing-type mills are widely used in metallurgy, mining, chemical, cement, coal gangue, construction, sand, refractory material, ceramic and other industrial and mining enterprises, engaged in breaking and crushing the material in the operation. It is mainly suitable for crushing various soft and hard ore. whose compression strength is not higher than 320MPa (MPa)
Features:
1. High production and high crushing ratio.
2. Low power consumption, homogeneous particle size.
3. Simple, compact and light mechanical structure.
4. Low investment cost, easy management.
Structure and working principle£º:
Efficient crushing mill consists mainly of frame, rotor, hammers and grizzly bars and other components. The frame includes upper part and lower parts, which are welded by steel plates after cutting, the remaining parts bolted into one. High manganese steel liners are studded with inside the frame, to facilitate replacement for a new liners after worn; on the main shaft are installed several groups of the spindle distribution of the hammers, which consists of rotor with the axle of hammers and rotary table. The host drives the main shaft through the motor and V-belt driven spindle to rotate the rotor, generating the centrifugal force, then driving all hammers stretch around. The bulks of material feed into the crushing chamber, will be crushed by the hammers at a high-speed movement. The broken material requested will be passed the grizzly bars at the lower part and discharged, the unbroken rest will be left in the chamber to be crushed repeatedly by the hammers and iron plates until it can reach the requested standard. To avoid clogging, the water content of the material to be crushed not more than 5%.
The performance parameters of efficient crushing-type mills:
Model PC4008-75 PC4012-90 PC4015-132
Diameter of the rotor (mm) 750 900 1150
Length of the rotor(mm) 800 1200 1500
Rotation speed of the rotor (r/min) 800-1000 800-1000 700-1000
Max. input size(mm) <100 <100 <100
Max. output size(mm) 0-3 0-3 0-3
Capacity (t/h) 10-25 30-50 40-75
Motor power(Kw) 55-75 75-90 110-132
No. of the hammers(piece) 10 16 24
Dimension
(L*W*H/mm) 1800*1650*1800 2200*2100
*2200 2860*2500*2500
Note: This specification is just reference, any changes are subject to the products.
T130X Superfine Grinding Mill is mainly used in processing powder of mineral materials of metallurgy, building materials, chemical industry, mining, etc. It can grind non-flammable and non-explosive materials with moisture less than 6% such as Feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramics, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, slag, activated carbon, dolomite, granite, iron oxide yellow, bean cake, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coke, lignite, Ling U.S. sand, gold, red mud, clay, Kaolin, coke, coal gangue, porcelain clay, kyanite, fluorspar, bentonite, muddy green rock, leaf wax rock, shale, purple rock, Diego rock, basalt, gypsum, graphite, insulation material, etc.
Equipments:
The complete set of T130X grinding mill consists of mainframe, reducer, classifier, maintenance platform, blower, collector, electric controller, etc.And some auxiliary equipments such as jaw crusher, bucket elevator, electromagnetic vibration feeder and hopper, etc.
Working Principal:
Large materials are crushed by jaw crusher into required size for mainframe, then the crushed materials are elevated to the hopper by bucket elevator£¬then to the grinding chamber for grinding by vibrating feeder evenly and continuously. The powder goes upwards with the airflow, after separating by the classifier, those which can meet the fineness requirement enters into the collector through pipes for separating and collecting, and discharged from the discharged valve as finished products. The airflow is sucked into blower through wind recycling pipe at the upper part of cyclone power collector. And the closed airflow circulation system with negative pressure ensures the environmental health of production line site.
Technical Date:
1) Mainframe parameters
Item Unit Specifications &Technical data
Quantity of roller pcs 4
Diameter of roller x Height mm 410x210
Diameter of ring x Height mm 1300x210
Rotation speed rmp 103
Max. feeding size mm <30
Output size mm 0.074x0.038
Capacity t/h 4£13
Weight t 18.
Note:
(1) Capacity in the table is referred to calcite, under the condition of 80% passing though.
(2) Any change of parameters and shape shall be subject to the usage and maintenance manual instruction with delivery.
Description --------------- Value
Working weight --------------- 180kg
Working width --------------- 560 mm
Actual load --------------- 2.9 kg/cm
Walking speed --------------- 1.6 km/hr
Frequency --------------- 4620/rpm
Centrifugal Force --------------- 10 km
Engine --------------- G X 160 5.5hp (Petrol)
Description:-
This is the latest in grinding technoiogy for rernoving all types of coatings, stains, contamination and flooring inperfections.
High performance machine for concrete floor preparation.
Ideal machine for preparing ondustrial floors to take epoxy or other toppings.
Removes up to 4mm in one pass.
Handwheel for precise grinding depth.
Two speed forward and reverse transmission.
High performance octagonal carbide tipped cutters.
Vacuum attachment, lifting sling, safety switch.
7.5 KW, 440 w motor, Weight 350 Kg.
Working width 300mm.
Output : 50 m2/hr.
Double beam screed vibrator
Jamshedji double beam screed vibrator is self-traveling and only requires guiding along the formwork dragged by two operators and they do not need to work in concrete. It is light in weight, economical to maintain, durable high quality heavy-duty spring steel, portable stressing bars for leveling.
Beams of different sizes can be provided, if ordered.
Specifications:-
Length of compaction shoe - 700mm
Width of compaction shoe - 500mm
over all length - 1500mm
over all width - 500mm
over all height - 1500mm
Travel speed - 10m/min
Depth of compaction - 30cm
Weight - 150kg
Paver Block making machine is generally used to make blocks, typical areas of use would be for driveways, pavement, patios, town centers, precincts and more commonly in road surfacing. The main benefit of paver blocks over other materials is that individual blocks can later be lifted up and replaced
5T automatic decoiler is a full automatic metal coil handling machine with the loading capacity up to 5T. We have normal cantilevered type of 5T electric motor decoiler and we also have double head 5T decoiler which can shift the direction either manually or automatically.
We have a coil car for option while you are loading the metal coil to the decoiling machine, or you can choose a crane for lifting the coil to the decoiler. Shrinking the decoiler mandrel to the minimum diameter allows the coil to fit onto the decoiler easily and then expand smoothly. The decoiler China model can release forward or backward automatically, and thereâ??s an ultrasonic sensor for controlling the uncoiling speed with high precision.
Use of 5T automatic decoiler machine
Metal Fabrication: Used in metal fabrication shops to uncoil steel for cutting, bending, and forming operations.
Automotive Industry: Essential in the production of automotive parts where steel sheets are required.
Construction: Used in the construction industry for preparing steel sheets for roofing, siding, and structural components.
Appliance Manufacturing: Utilized in the production of household appliances that require steel components.
Pipe and Tube Manufacturing: A decoiler with coil car is used to uncoil steel efficiently for the production of pipes and tubes.
Features of 5T Automatic Decoiler Machine
Capacity: Designed to handle coils up to 5 tons in weight.
Automatic Operation: Equipped with motorized systems for automatic feeding and uncoiling.
Hydraulic Expansion: There's hydraulic expansion mandrel to securely hold and release the coil.
Speed Control: There's ultrasonic control for controlling the uncoiling speed.
Safety Features: There's emergency stop button to ensure safe operation.
Integrated Braking System: Helps to control the uncoiling process and prevent overrun or backlash.
5T Decoiler Machine Function
Heavy-Duty Coil Handling: The 5T automatic decoiler effortlessly supports large metal coils up to 5 tons, ensuring smooth and reliable unwinding during continuous production.
As a manufacturer for metal processing machinery, Smartech Machinery devotes to designing and building all types of roll forming machines for metal profiles and we are also a space maker for stacking the metal sheets by investing vertical storage.
Different Types of metal processing machinery
A roll forming machine is a type of metal processing equipment used to shape metal sheets into specific profiles or cross-sections through a continuous bending process. This machine is widely used in various industries, including construction, automotive, and manufacturing, to produce components like roof panels, wall panels, gutters, and more. For developing a complete metal profile producing line, we also provides types of decoiler machine for loading the steel coils with different capacity, coil upender for turning the coil to right direction for easily feeding to the machine,cutting and slitting machine for getting right strip coils for different profile sizes. Besides, in order to save space for our related customers, we also supplying metal sheet vertical storage system especially for customers who use folding and laser cutting machines.
Roll Forming Machine
Roof/Wall Panel Roll Forming Machine
Metal Tile Roll Forming Machine
Ridge Cap Roll Forming Machine
Metal Deck Roll Forming Machine
C/Z/U/M Purlin Roll Forming Machine
Downspout Roll Forming Machine
Gutter/Gutter Waterlock Roll Forming Machine
Shelf Rack Roll Forming Machine
Guardrail Roll Forming Machine
Metal Flashings Roll Forming Machine
Roof Sheet Crimping Machine
Roll Forming Machine
Roll Forming is a machining process in which a flat metal strip is progressively transformed into a profile. The transformation takes place by passing the material through groups of powered roller sections, which step by step give the material strip the shape of the finished profile. The material is usually fed by coil and the length of final products is setted on procduction requirements. Smartech Machinery designs, manufactures and sales all over the world with a wide range of complete roll forming lines for production of profiles with high quality standards.
A purlin roll forming machine by professional purlin roll forming machine factory and manufacturer is a versatile piece of equipment used in the construction and manufacturing industries to produce various types of purlins, which are horizontal structural members in buildings. These purlins are typically used to support the loads from the roof deck or sheathing. We have different profiles for purlins such as C, Z, U, and M shapes.We have single c purlin machine, Z, U, M purlin making machines or changeable CZ purlin lines. The sizes can be changed by spacers manually or automatically by motor. Smartech Machinery offers various standing seam roll forming machines for sale to meet your different needs.
Use of C/Z/U/M Purlin Roll Forming Machine for Sale
Smartech Machinery hydraulic automatic c purlin roll forming machine consists of a decoiler, feeding device, leveling device, punching device, cutting device, roll forming stations, and an electric controlling system. You can also require automatic stackers as an option. For punching distance and sheet length, you can input parameters via the touch screen, allowing the sheets to be punched and cut at the set length through PLC and Encoder control. This system supports various configurations, including the single cz purlin roll forming machine,u purlin machine and changeable u purlin roll forming machine, making it a fully automatic and continuous forming solution for producing high-precision purlins.
If you have any question about our cz purlin machine or other upender machine and roll forming machines like wall panel roll forming machine, don't hesitate to send us a email.
C/Z/U/M Purlin Roll Former Features
Versatility: Capable of producing multiple sizes of profiles or (C, Z, U, M) with quick changeover.
High Efficiency: Produces large quantities of purlins in a relatively short amount of time.
Consistency: Ensures uniformity and precision in the produced purlins.
Customization: Adjustable rollers and punching systems allow for various sizes and hole patterns.
4651 Building Construction Machineries And Equipments Suppliers
Short on time? Let Building Construction Machineries And Equipments sellers contact you.
.jpg?format=webp)
