Find Verified Used Engine Oil Suppliers, Manufacturers and Wholesalers

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

Custom Liquid filled Solar Inverter Step up Oil-Immersed Transformer for photovoltaic power plants includes hermetically sealed, amorphous alloy, conservator type and on-load tap changer type, which is usually pole mounted or installed in distribution station for daily lighting and factory power whose LV output up to 0.4kV. Our distribution transformer rating is up to 2500kVA, and primary voltage up to 35kV. The corrugated tanks as thermal expansion and contraction component enable the transformer oil completely isolated with the atmosphere. Oil distribution transformer with primary voltage range of 6,10,10.5,11,20,22,24,33, 35,38.5kV can be manufactured according to customer requirements.

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

GER used engine oil purifier

Nsh ger used oil purifier machine

Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.
Edges of ger

1. Design according to different customersf+ needs including turnkey project.
2.Purify blended oils.
3.Low operation cost.
4.Low maintenance and replacement expenses.
5.High regeneration rate.
6.Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
7.High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
8.Small size, light weight, low noise.
9. Two main filtering systems in the ger which can ensure the ger works continuously by batch.
10.Environmentally friendly.

GER series Used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¯s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.

used engine oil recycling machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.
systems of used engine oil recycling machine
1 Pretreatment systemWaste oil will be pumped into the distillation kettle after pretreated.
2 Distillation system: through burning gas , fuel oil or coal to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.
3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.
4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.
5 Vacuum system: meet the technology requirement.
6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel.
Recovery rate
Base oil: 85%~88 %( index same as SN150~SN200)
Gasoline: about 3%
Diesel: about 3%-4%
Oil residue: 6%~8%

Fason waste lubricant oil distillation plant is a newly developed product which combines dozens of our latest technologies. It is able to rapidly extract light and heavy distillates from different fractions by given different temperatures control along with our own formulated catalyst compound. It can also remove the metallic compound, base nitrogen, sulfur etc. From distilled oil during re-refining process. The end product after distillation could be adjusted into either new base oil or golden diesel fuel according to the customer demands.

This equipment apply to recycle the used engine oil. It can remove the tiny impurity dispersed in oil such as carbon particles, deep oxides and bad substance like colloid, bitumen.
Kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

Features:

1. It is a physiochemical application to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated. The colloid, bitumen and other compound in oil are also removed while harmful gas and the filtration and the vacuum dewatering function of waste gas cleaner remove water content.
2. High precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime. It is easy-to-use, and utilizes the economical pressure filter as filter medium.
3. Novel structure, good layout and is deemed as a mini refinery.
4. Very straight and evident effect, can also serve for multiple purposes.
5. Can be tailored to meet the needs of an individual customer.

L:1500mm
W:1000mm
H:2000mm.

Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Application

NSH GER used oil regeneration system is particularly suitable to filtering used
internal-combustion engine oil including diesel engine oil, gasoline engine oil
and used hydraulic oil, other used machinery's lubrication oil. GER Recycling
series are able to effectively remove colloid, oxid, acid, pitch, particles,
impurities, water, gas in the used oil. Specially, GER can restore the color of
used oil and remove the scent rapidly.

Edges of GER

1.Design according to different customers’ needs including Turnkey Project.
2.Purify blended oils.
3.Low operation cost.
4.Low maintenance and replacement expenses.
5.High regeneration rate.
6.Automatic reverse washing system will extend the lifetime and improve the performance
of the filters.
7.High performance security system including pressure protection device and automatic
temperature controller makes purifier operated safely.
8.Small size, light weight, low noise.
9. Two main filtering systems in the GER which can ensure the GER works continuously
by batch.
10.Environmentally friendly.

Technical Specifications

Item Unit GER-1 GER-2 GER-3 GER-4 GER-5 GER Product Line
Treatment Capacity L/8 -10hrs 2000 4000 6000 8000 10000 Above 10000
Regeneration Rate % 70-90%
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB(A) =90
Heating Power KW
Inlet/Outlet
Pipe Diameter Mm F42
Weight kg 6000 6700 7200 8000 8500

NSH GER series used oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery f+s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Edges of GER
* two main filtering systems ensuring continuous work.
* no acid used during operation.
* stainless steel made filters.
* remove exhaust gas quickly and efficiently.
* heat preservation material keeping high efficient heating.
* turnkey project.
* purify blended oils.
* low operation cost.
* low maintenance and replacement expenses.
* high regeneration rate.
* automatic reverse-washing system improving performance of filters.
* high performance security system.
* small size, light weight, low.

Ger series used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¡¥s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Different types

Cold-pressed castor oil in a 50 ml amber roll-on bottle with a rose quartz stone ball, packed in a printed box. For hair, brows and skin. Non-hazardous for transport, MSDS available.

Grade C NitrocelluloseCellulose nitrate CAS 9004700

Nitrocellulose is a white odorless and odorless solid Celluloid plastic is a thermoplastic material containing 20 camphor plasticizer It softens significantly at 80 can be molded and processed at 110125 and can self ignite above 165 Transparent soft with high mechanical strength and low water absorption No deformation and no white spots in boiling water for 2 minutes Stable to water and general dilute acid solutions can be corroded by dilute alkaline solution partially soluble in benzene and dichloroethylene and soluble in solvents such as ethanol and ethyl acetate

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls triangular plates pen holders eyeglass frames toys and umbrella handles and tool handles in daily necessities Nitrocellulose can also be used as a fiber adhesive coating and substrate material

This product is nontoxic This product belongs to Class A flammable dangerous goods Packaged in wooden boxes with plastic bags lined inside Each box should not exceed 160kg or packaged according to user requirements There should be a flammable mark on the outside of the box Storage should be placed in a dry ventilated and clean warehouse away from heat sources and direct sunlight It should not be stored together with acidic self igniting and explosive materials It is strictly prohibited to approach open flames Transportation should be protected from sunlight and rain and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods

CN is fully kneaded with plasticizers such as camphor solvents alcohol dyes or pigments in a kneading machine at 36 and then filtered in a pressure filter at 60 The filtered material is rolled on a two roller rolling machine and the resulting thin sheet is crushed dried flattened or polished to obtain sheetlike CN plastic The rolled thin sheet can also be placed into an extrusion machine to form a tubular object

Application of nitrocellulose
Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone
Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

LYE used engine oil regeneration system is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. Also can be treated with regeneration by LYE series machines.

LYE series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil from car, motor, truck, ship, mines, electrical power and so on.

It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly.

After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too, so as to resume the performance of gas or diesel engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas or diesel engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

Features
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.

Our Main Products:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series LYE Engine oil recycling system
Series TYB Portable light Fuel oil purification machine
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series JL Portable oil filtering and oiling machine
Series IIJ Oil Tester (BDV Tester) .

Use: It is used as an intermediate in the production of pesticides, ceftiofur and organic chemicals. It is mainly used in the synthesis of sulfadiazine drugs and the production of pesticides, fungicides and herbicides. It is also used in the production of new pesticides, such as dicofone, dicofone, kecaojin, etc .

Nitrocellulose is a white, odorless, and odorless solid. Celluloid plastic is a thermoplastic material containing 20% camphor plasticizer. It softens significantly at 80 , can be molded and processed at 110-125, and can self ignite above 165 . Transparent, soft, with high mechanical strength and low water absorption. No deformation and no white spots in boiling water for 2 minutes. Stable to water and general dilute acid solutions, can be corroded by dilute alkaline solution, partially soluble in benzene and dichloroethylene, and soluble in solvents such as ethanol and ethyl acetate.

Method of production

Nitrocellulose is a mixture of acid that nitrates cellulose, undergoes acid removal, pre washing, boiling, washing, dehydration, and then uses alcohol to remove water, resulting in nitrocellulose containing alcohol.

purpose

Nitrocellulose is mainly used in the plastic industry to manufacture stationery and educational items such as table tennis balls, triangular plates, pen holders, eyeglass frames, toys, and umbrella handles and tool handles in daily necessities. Nitrocellulose can also be used as a fiber, adhesive, coating, and substrate material.

Security

This product is non-toxic. This product belongs to Class A flammable dangerous goods. Packaged in wooden boxes with plastic bags lined inside. Each box should not exceed 160kg, or packaged according to user requirements. There should be a "flammable" mark on the outside of the box. Storage should be placed in a dry, ventilated, and clean warehouse, away from heat sources and direct sunlight. It should not be stored together with acidic, self igniting, and explosive materials. It is strictly prohibited to approach open flames. Transportation should be protected from sunlight and rain, and should be carried out in accordance with the transportation regulations of the transportation department for dangerous goods.

Forming processing

CN is fully kneaded with plasticizers (such as camphor), solvents (alcohol), dyes (or pigments) in a kneading machine at 36, and then filtered in a pressure filter at 60 . The filtered material is rolled on a two roller rolling machine, and the resulting thin sheet is crushed, dried, flattened, or polished to obtain sheet-like CN plastic. The rolled thin sheet can also be placed into an extrusion machine to form a tubular object.

Engine oil
Nsh ger engine oil regeneration system(used oil purifier, oil treatment, oil recovery, oil processing, oil filtering, oil filtration, oil purification, oil recycling, oil restoration, oil disposal, oil reclamation)
Application
Nsh ger engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of ger
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.

Centralite II (Dimethyldiphenylurea)

It is used as stabilizer. production of Intermediates of organic chemicals.

Stabilizers used for manufacturing propellants and nitrocellulose.

Nsh ger used oil regeneration system

Application(oil filtration, oil purification, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, oil filter, oil purifier, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil processing)
Nsh ger gas engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.

GER series used oil recycling machine can recycle kinds of used engine oils including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. It has such main characteristics and advantages:
1.Two main filtering systems can ensure the GER to work continuously by batch.
2.GER machine can install the equipment to remove the bad smell of treated oil, thus it's a machine which is good for the environment protection.
3.GER can install special equipment to treat discharging gas well.
4.GER can purify the mixed used oil, but the output quantity and quality is influenced by the composition and quality of used oil
5.Low investment and high gaining. Comparing with other kind of used oil recycling machine, buyer invests less and get not less gaining. One used oil recycling machine is just equivalent to a small oil mill.

Product name Tetramethylurea CAS NO.: 632-22-4 MF: C5H12N2O Structural type: Properties: Colorless transparent liquid. Slightly pleasant smell. It can be miscible with water, petroleum ether and most commonly used organic solvents.
Product specification:ï¼?Q/CFH 14-2019ï¼? Items Specification Appearance Colorless Transparent Liquid Mass fraction of tetramethylurea, % â?¥ 99.5 water content,% â?¤ 0.5
Use: It is mainly used as an intermediate of insecticide; Advanced solvent, used in dye and other industries; As an intermediate of surfactant.
Packaging, storage and transportation: Galvanized iron drum packaging, 180kg / barrel.

This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

1. High precision stainless steel net is used as purifying material which is corrosion-proof, high temperature resistant and has a good mechanical strength with longer life time, capable of removing oils' tiny impurity in more depth.
2. High accurate and effective removal of water content in oil, as well as rest of harmful gas.
3. Capable of recovering the clarity of engine oil back to the clarity of new oil.
4. This purifier adopts both manual and auto disposal of residue, which operates fast, stably, reliably and safely.
5. Strong condensation technology is applied to the drawn out mixed gas which increases effective output and extend life time of vacuum pump.
6. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met.
7. Imported parts are used for all electric system which ensures operation of the equipment with high performance.
Item unit zly
Flow rate kg/d 8000
Working pressure mpa -0.095~0.4
Temp. Control range centi 80 centigrade~180centi
Working noise db(a) f_80
Heating power kw 72 kw
Inlet/outlet pipe diameter mm 42
Overall size mm 3850*2250*2320
3500*1750*1850
3500*1750*1850

Engine oil regeneration oil purifier
Nsh ger engine oil regeneration system(used oil purifier, oil treatment, oil recovery, oil processing, oil filtering, oil filtration, oil purification, oil recycling, oil restoration, oil disposal, oil reclamation)
Application
Nsh ger engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of ger
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.

Application:
LYE series engine oil purifier is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.

Features:
1. Fine precision filtering material, with excellent mechanical strength and long service life, which is anti-erosion and anti-hi-temperature, with high performance of removing fine particles in the contaminated oil.
2. Completely removing water content and harmful gases from the contaminated oil.
3. Manually/automatically removing residual impurities from the machine, which is easy to operate and on the safe side.
4. The mixture of gases drawn out via vacuum system is condensed and dewatered by forced air, which improves the effective output power of the machine and prolongs the service life of vacuum pump.
5. After treating, the oil color looks like the new.

Advantage:
This machine can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerate the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

LYE series is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.


Wooden case

Centralite I (Diethyl diphenyl urea

It is used as stabilizer production of Intermediates of organic chemicals.

Stabilizers for the production of propellants and nitrocellulose.

Engine oil purifier

LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.


wooden case

NPK 18-18-0 is a kind of agricultural compound fertilizer, which can be used in agriculture to grow corns and other agricultural products.

Engine oil regeneration system
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.

Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose

This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

Use: It is used as an intermediate in the production of pesticides, ceftiofur and organic chemicals. It is mainly used in the synthesis of sulfadiazine drugs and the production of pesticides, fungicides and herbicides. It is also used in the production of new pesticides, such as dicofone, dicofone, kecaojin, etc .

NSH GER Used Oil Regeneration System is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryí»s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.

Used Oil Vacuum Distillation Machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.
systems of used engine oil recycling machine
1 Pretreatment systemWaste oil will be pumped into the distillation kettle after pretreated.
2 Distillation system: through burning gas , fuel oil or coal to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.
3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.
4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.
5 Vacuum system: meet the technology requirement.
6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel.
Recovery rate
Base oil: 85%~88 %( index same as SN150~SN200)
Gasoline: about 3%
Diesel: about 3%-4%
Oil residue: 6%~8%

Lye series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

V. Features

1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating ac contract and prolong the service life of ac contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vaccum level, ultra-pressure etc.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Engine oil regeneration system is mainly for regenerating the waste engine oil.

Lye series oil refinery machine is special for treating engine/car/ship/black oil, you could get clean and refreshed engine oil after treated by this machine.


If this is not your needing type, follow is our catalogue for you to choose:
Series zy single-stage vacuum transformer oil purifier
Series zyd double high vacuum transformer oil purifier
Series zyb multiply-function insulating oil treatment machine
Series ty turbine oil purification apparatus
Series tya lubricating oil/ hydraulic oil purification unit
Series lye engine oil recycling machine
Series bod black dirty oil regeneration equipment
Series dod diesel oil regeneration equipment
Series tyb portable light fuel oil purification machine
Series ly plate pressure oil purifier
Series tyd vacuum dehydrator
Series jl portable oil filtering and oiling machine
Series iij oil tester (bdv tester)

Two-piece ceramic oil and incense burner with a candle chamber below and a removable dish above. Matte glaze, black, matching spoon included. Works with wax melts, essential oil and bakhoor. Packed in a foam-lined colour box for sea freight.

Used oil recycling machine

Recycle all kinds of engine oil, filtrate water/gas/impurities in the oil, to decolorizing the black oil to be yellow clean one.


Wooden case

Application:

This machine is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, car/motor oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. also can be treated with regeneration by LYE series machines.

Product description:

LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

Features:

1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil.
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.




wooden

White crystalline powder, high-purity stabilizer for propellants and explosives.

Effectively absorbs nitrogen oxides, inhibits thermal decomposition of nitrate esters, and extends storage life.

Features good compatibility, high thermal stability and low sensitivity. Widely used in double-base propellants, nitroglycerin explosives and pyrotechnics.

the Family tent has 16 m2 main floor area, plus two 3.5 m2 vestibules, for a total area of 23 m2, double-fold with ground sheet.

It is the standard tent used by UNHCR/ICRC/IFRC and suitable for a family of5 people, following the recommended minimum living area in hot and temperate climates (3.5 m2 per person), and providing additional space for cold climates.

The technical specifications of this tent were developed by shelter specialists, with close technical cooperation between UNHCR, IFRC and ICRC, to guarantee a product fit for human use in all climates, with appropriate outdoor life span, at a minimum cost.

The technical specifications of this tent are generic, ensuring that the product can be manufactured by different suppliers in various countries, with the common technical know-how and standard equipment from the tent industry.