Engine oil purifier LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource. wooden case
Transformer oil purifier Application This plant is applied to regenerate and purify the used insulation oil such as transformer oil, switch oil, mutual inductor oil and so on. It can remove water, gas, particle, free carbon, deep oxides and so on. Also it can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function. Features: 1. Besides the common vacuum oil purifierí»s function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility. 2. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so dose the regeneration oil system, and also they can work at the same time. 3. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration. Advantages: It can not only removing the water, gas and impurities which mixed in the oil, but also can improve many values reach to the national standard such as the acid value, ph value. Meanwhile, it improves the voltage-withstand value through filtering the polarity materials like free carbon, deep oxides and so on. Wooden case
Vacuum Turbine Oil Purifier,Emulsion Oil Purification Plant Vacuum Turbine Oil Purification Plant Series TY vacuum turbine oil purifier mainly be used for purifying unqualified turbine oil, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely. This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clear transparent. Series TY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil. Features: 1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles 2. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology. 4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 5. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 6. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 7. Work online with stream turbine, hydraulic turbine. Turbine Oil Purifier Available Style 1. Fixing type,mobile type with four wheels and mobile type with trailer. 2. Normal appearance type,shelf-covering type and explosion-proof type. 3. Avaliable in different color. Technical Parameters: Index Name Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300 Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000 Working vacuum MPa -0.06~-0.095 Working pressure MPa 0.4 Temperature range 20 ~80 Power supply 380V 50HZ 3Ph (As per users option)
Vacuum Gear Oil Purifier, Compressor Oil Purification Machine PLC Vacuum Lubricant Oil Purifier TYA Series Lubricant Oil Purifier are mainly designed to handle the water infiltration, emulsification and particle pollution of various industrial oil such as gear oil,compressor oil , cooler oil,mechanical oil, hydraulic oil, caused in the process of their production, transportation and usage. It is solely designed for lubricating oil is made according to nature of high impurity of gear lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system. Feature: 1) Perfect capacity of removing impurities. The special filters made of special materials which can effectively and rapidly eliminate various impurities, water and gas. 2) Automatic reverses flushing ability, which automatically cleans the mass impurities withheld by the purifier. 3) Advanced medium heating absorption and condensation system 4) Pressure protection, auto heating temperature control, and device of auto separation of condensate water, easy to handle, safe and reliable. 5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime. 6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil. 7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance 8) Lowly noisy oil pump is specially made
Application: The TYA series can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is applied to recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil, industrial oil, car lubricating oil, Motor oil and so on. This machine suit for many lines, such as the mine, metallurgy, industry, electric power, transportation, manufactures and so on.
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties. Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade. TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.