Application:
It is mainly used in regenerating the used lubricating oil, which contains large quantity of impurities and grease, such as lube oil, hydraulic oil, ditch oil ect.
Features:
1. Removing large quantity of grease and impurify from the oil by employing the high speed centrifugation.
2. Great ability to break emulsification of h.P.M high molecule polymeric materials.
3. The combination and coalescing separation and vacuum duplex 3d stereo- evaporation , eliminating water.
4. Deep and highly precise fh rectangle filtering water.
5. Zhongneng's high molecule absorption materials technology.
Advatages:
Hydraulic lubricating oil treated by this machine contains low emulsification value, few water and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipments t home and abroad.
Lye series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.
V. Features
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating ac contract and prolong the service life of ac contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vaccum level, ultra-pressure etc.
Application:
Series zyb highly vacuum transformer oil regeneration machine is used for overhauling and installing the electric insulating equipments which can running as energized, such as transformer, oil switch, and mutual inductor. Also it is especially applied to regenerate and purify the seriously exhausted insulating oil and make the oils reach the international standard. As a special equipment for dehydration, degassing, purification process of various kinds of insulating oils in electrical transformers and circuit breakers etc. It is designed on vacuum drying principle, coalescence and separation technique, accurate fine filtration and other zhongnengs'patented technique.
The oil technical data after treatment:
1. Gas content less than 0.1%
2. Impurity size less than 1ª8m without free carbon
3. Oil dielectric strength (breakdown voltage) more than 75kv
4. Acidity value less than 0.01 mgkoh/g
5. Dielectric loss factors at 90íµ less than 0.001
Features:
1. Besides the common vacuum oil purifier's function of dewatering, degassing, and eliminating impurities, this machine can regenerate the seriously exhausted oil by removing the polarity materials, such as deep oxides, free carbon in the oil effectively. It can make the seriously exhausted oil reach the normal index like anti-oxidation, acid-base water-solubility.
2. Three ways of using: the vacuum dewatering, degassing, removing impurities system can work independently, so does the regeneration oil system, and also they can work at the same time.
3. Double-stage, high vacuum pressure and high flow rate that help remove water, air, gases, solid particulates and other impurities from oil quickly and efficiently so as to improve the breakdown voltage of oil and maintain its insulating property.
Application:
Series zyd double-stage vacuum transformer oil purifier machine is special for treating the used and old transformer oil, mutual oil, switch oil. Comparing with the single stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water, gas and impurities in insulation oil high-efficiently, increasing the pressure force and quality of oil, make sure the electric device running safely. Also it can inject the insulation oil into the transformers on line, regeneration the seriously deteriorated oil by removing the polarity materials. The machine is specially applied to vacuum filling oil and drying for power transmission equipments that are over 110kv.
The oil technical data after treatment:
1. Gas content less than 0.1%
2. Impurity size less than 1ª8m without free carbon
3. Oil dielectric strength (breakdown voltage) more than 75kv
4. Acidity value less than 0.01 mgkoh/g
5. Dielectric loss factors at 90íµ less than 0.001
Feature:
1. Ph of treat oil í²5.5 2. Acid value ín0.03mgkoh/g
3. Flash point í²145íµ 4. Anti-pressureí²60kv
5. Dielectric loss: dielectric loss: tg ªS (90ípc)% ín0.001
6. High vacuum: high point-vacuum ín5pa; working-vacuum ín35pa
7. High absorption speed: absorption speed power í²333l/sr.
8. Duplex 3d stereo-evaporation, eliminating the liquid water quickly
9. Uk g technology, by which the trace water that is show chain, such as dissolved water, can be removed effectively
10. Instinctively removing impurities system filtering through the double fh trapezoidal network and absorbing by high polymer without mechanical power
11. Argon fiber infrared heating system that can make the oil contain zero sum of ethyne after the treatment.
Iij-ii oil breakdown voltage tester is produced by our company, which adopts industrial single plate integrated circuit, new-style i/o jack, with unique inspection and anti-jamming technology to greatly improve its reliability and functionality.
Main features:
1.Easy operation, high autoimmunization (only press button once and all work done automatically)
2.Menu management, data input simple and convenient
3.It can store 99 data of oil sampling tests, the test data can be reviewed and printed in 100 years even after power is off.
4.The clock in going on after power off.
(the internal time of the system just for test reference, not for standard time)
5.The software can be upgrade through rs232 terminal.
6.Strong anti-jamming, high precision testing.
7.Small measurement, light weight, and convenient for outdoor operation.
2.Technical parameter
1.Power supply: ac220v ía10%, 50hz
2.Output voltage: 80kv, 100kv (100kv can be manufactured to order in advance)
3.Capacity: 1.6kva, 2.0kva
4.Speed of voltage increase: about 2kv/s
5.Voltage inspection accuracy: 3%
6.Breakdown sensitivity: <2kv
7.Waveform distortion: 3%
8.Breakdown response time: ms
9.Working environment: temperature: 0c~40c, humidity: max relative humidity 85%
10.Storage environment: temperature: ú¡20c ~ 60c, humidity: max relative humidity 75%
11.Work height: <1500m (if over 1500m, it can be customized)
Crude Oil:
Bonny Light
REBCO
ESPO (Siberia Pacific Oil)
Basra Light
WTI
Southern Green Cayon Blend
Olmeca Mexican crude
Heavy Crude, etc.
Product Description :
Crude oil is a mixture of hydrocarbons that formed from plants and animals that lived millions of years ago. Crude oil is a fossil fuel, and it exists in liquid form in underground pools or reservoirs, in tiny spaces within sedimentary rocks, and near the surface in tar (or oil) sands
Price of product ( USD price or FOB price) : Price on request
Product origin : Worldwide
Key Specifications/Special Features :
Specifications for types/grades of crude (special grade needed by buyer)
will be issued after received your credible purchase request in the form LOI/ICPO docs.
Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.
We have all kind of D2 and Bace Oil bulk quantities available. We have also bitomen with cheap price available stock.
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Product origin : Russia Key Specifications/Special Features : Grades : SN 150, SN 300, SN 500 Size and Packgaing details : Flexitank, IBC, Drums
