Find Verified Steel Rods Suppliers, Manufacturers and Wholesalers

Product - Steel Coils

Product Name
Galvanized steel coil
Metal Base
SPHCï¼?SPCC, SPCD, SPCE, ST12-15, DC01-06, Q195A(B)-Q345A(B)
Thickness
0.9mm/1mm/1.2mm
Width
600mm to 1500mm
Length
According to Customerâ??s Requirement or Cut into Sheet
Zinc Coating
20-275g/m2



Color Series
RAL Color Number
Coil Weight
2MT----10MT/Coil
Coil Internal Diameter
508----610mm
Application
Roofing Sheets, Home Electrical Appliance, Structural Materials, Commercial Use, Industry.
Package
Standard Export Package (Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)
Place of Origin
Durban, South Africa

Electro Galvanized Iron Wire
Specifications:
high quality electric galvanized iron steel wire for binding 20 gauge

wire gauge size SWG(mm) BWG(mm)
8 4.05 4.19
9 3.66 3.76
10 3.25 3.40
11 2.95 3.05
12 2.64 2.77
13 2.34 2.41
14 2.03 2.11
15 1.83 1.83
16 1.63 1.65
17 1.42 1.47
18 1.22 1.25
19 1.02 1.07
20 0.91 0.84
21 0.81 0.81
22 0.71 0.71

The threaded rods are steel rods designed to be in full tension state. They are mainly used in suspended ceiling applications. They connect suspended metal profiles (C-channel, furring channel) to the soffit ceiling by using the appropriate drop in Anchor.
Advantages:
Ceiling System

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Wheelchair

This wheelchair is designed to provide reliable mobility, comfort, and ease of use for individuals with limited movement. Built with a sturdy frame and ergonomic design, it offers excellent support for daily indoor and outdoor use. The wheelchair features smooth maneuverability, comfortable seating, and durable construction, making it suitable for hospitals, care facilities, rehabilitation centers, and personal use. Its practical design ensures user comfort while allowing caregivers to assist with minimal effort.

Specifications:

* Frame Material: High-strength steel or aluminum alloy
* Seat Material: Durable nylon or breathable fabric
* Seat Width: 16-20 inches
* Seat Depth: 16-18 inches
* Overall Width: 24-28 inches
* Weight Capacity: Up to 100-150 kg
* Rear Wheel Size: 22-24 inches
* Front Caster Size: 6-8 inches
* Folding Design: Yes
* Armrest Type: Fixed or detachable
* Footrest Type: Swing-away and adjustable
* Braking System: Manual wheel locks
* Cushion: Comfortable padded seat and backrest
* Mobility Type: Self-propelled or attendant-propelled
* Application: Medical, rehabilitation, and personal mobility support

Steel Coils are widely used in construction, manufacturing, automotive, fabrication, and industrial applications due to their excellent strength, durability, and flexibility. These coils are produced with smooth surface finishing and consistent thickness to ensure reliable performance in various processing operations such as cutting, bending, welding, and forming. Designed for long-term use, Steel Coils provide strong resistance to wear and mechanical stress, making them suitable for heavy-duty applications.

Manufactured using high-quality steel material, these coils offer excellent dimensional accuracy and stable mechanical properties. They are available in different thicknesses, widths, and grades to meet diverse industrial requirements. The product is suitable for roofing panels, structural components, pipes, machinery parts, storage tanks, and general engineering purposes.

Specification Points:

Material: High Quality Steel
Shape: Coil
Surface Finish: Smooth and Uniform
Thickness Range: Customizable
Width: Various Sizes Available
Coil Weight: As Per Requirement
Tensile Strength: High
Corrosion Resistance: Good
Application: Construction, Manufacturing, Industrial Use
Feature: Durable, Strong Structure, Long Service Life

Steel Coils are carefully processed and packed to maintain product quality during storage and transportation while ensuring dependable performance for industrial and commercial use.

SPECIFICATIONS:

the following Percentage Points:

Chemical Composition

Carbon - 0.54 to 0.82%

Phosphorus - 0.035% max

Manganese - 0.60 to 1.05%

As. - 0,01max of Mass share

Silicone - 0.18 to 0.40%

Sulphur - 0.035% max

Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75

The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)

Used Rails shall be considered free of alloys when the residual alloying elements do not exceed

Cut to 1.5 meter length (standard)



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Aluminium rod

S/N Description
1 Commodity Dolomite For Steel Making
2 Origin Egypt
3 Size According to customer's order
3 Quantity According to customer's order
4 Packing In New Big Bags 1250 kg - 1500 kg
5 Price 00 $/ Ton Price CIF
6 HS code 38220090
7 Payment 50% in advance and 50% after shipping against copy of Documents
8 Trans time
9 Inspection SGS or BV
10 Validity One month
11 Loading ability Each Container Load 20 Bags ,24-25 Tons
12 Shipping date According to Quantity
15 Loading Port Egyption Port
16 Our Offer Includes below Doc Commercial invoice
3 original bill of lading
2 copies of bill of lading
Packing list
Certificate of origin

Dolomite Steel

Steel Billets

Ukrainian origin) ,.....etc.

AFT Round Wavy Steel Fiber 0.8/55 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage .
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions

Usage:
-Industrial floor slabs
- Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas .
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations .
-Mass concrete and composite deck construction.
-Military Purposes

Limestone For Steel Making

Steel fibers are manufactured to deliver high tensile strength, effective crack control, and structural contribution in fiber-reinforced concrete.

Steel fibers are commonly used to:
Enhance post-cracking behavior
Improve load distribution
Reduce or replace conventional steel mesh
Increase impact and fatigue resistance

Galvanized wires various diameters in spool , steel specification are according to AISI 1010 standard & ASTM A820

End Hooked Steel Fiber 1.0/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage .
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions

Usage:
-Industrial floor slabs
- Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas .
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations .
-Mass concrete and composite deck construction.
-Military Purposes

40oz Tumbler With Handle
CONTACT US FOR FREE DESIGN SKETCHES
Material:

BPA FREE food grade 304 stainless steel
Capacity:

20oz 30oz 40oz
Colors:

Multicolor in stock or customized pantone color
Surface:

Glossy, Soft matte, Hard matte, Sublimation
Package:

Individual plain box or customized color box, gift box
Custom Logo:

Silk printing, uv printing, laser engraving and so on
Accessory:

Transparent PP straw matte PP straw or colored PP straw
Functionï¼?

Keep drinks hot or cold
MOQ:

1 Carton, 25 pics / carton
Our vision is to allow people all over the world to drink can be safe and fun, so we have a lot of different cup shapes suitable for use in different scenarios such as home, school, office, travel, mountaineering, and car.

1. Material: I only use high-quality materail above food grade, and can provide relevant test reports.

2. Process: We strictly control each process. According to different cup shapes, we use seamless stretched cup body or water rising process cup body, automatic environmental protection spray paint and plastic spray line, manual polishing, electrolysis, and pumping for more than 6 hours Vacuum, 3 times temperature measurement to ensure the best quality

3. Customization: We have a professional design team that can do logo design, packaging design, cup design, and develop multiple new cups every year to keep up with market trends

4. Service ability: We have more than 10 years of industry experience, one-stop service from production to sales, if you are a purchaser with rich experience, we have enough experience to realize your plan, if you are just a start-up, We can also give enough support to small businesses who are struggling with their own personal business, and you can customize your own logo with 1 carton

We produce our Cooke ware pure stainless steel grade 304(18/10)
With high quality and automatic control system
All the utensils pot with side backlit handle different color (red - black - stainless steel handle)
Each pcs or size from the size we stamped it with our trademark - size by cm and the capacity by liter
And we stamped it with our name to be sure that from our production
and we had strong team for salesman we produce all the items of kitchen utensils, casserole& fry pan, rectangular pots with capsule pot & cutleries ( spoon- fork knife ) and round oven dish products for hard service and Cooke for army and house student & hospitals& hotel & traditional food for gulf area
Packing and shipment

We produce our Cooke ware pure stainless steel grade 304(18/10)
With high quality and automatic control system
All the utensils pot with side backlit handle different color (red - black - stainless steel handle)
Each pcs or size from the size we stamped it with our trademark - size by cm and the capacity by liter
And we stamped it with our name to be sure that from our production
and we had strong team for salesman we produce all the items of kitchen utensils, casserole& fry pan, rectangular pots with capsule pot & cutleries ( spoon- fork knife ) and round oven dish products for hard service and Cooke for army and house student & hospitals& hotel & traditional food for gulf area
Packing and shipment

High carbon steel wire from mattress spring (Bonnell and Pocket)
Material :AISI 1045,1060,1065,1070,1072
Wire diameter : 1.2mm-5mm
Tensile Strength : 1550- 1850 MPA

Xorex Corrugated Segment 0.7/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage.
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions.

Usage:
-Industrial floor slabs.
-Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas.
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations.
-Mass concrete and composite deck construction.
-Military Purposes.

EESF�® AFT Round Wavy Steel Fiber 1.0/55 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths

Advantages
Prevent cracks due to early-age shrinkage.
Better cohesion in the fresh concrete.
Increase flexural strength and shear resistance.
Improve load capacity and concrete ductility.
Increase abrasion, fatigue resistance.
Enhance concrete in its hardened state.
Provide ultimate performance under intense conditions.

We produce our Cooke ware pure stainless steel grade 304(18/10)
With high quality and automatic control system
All the utensils pot with side backlit handle different color (red - black - stainless steel handle)
Each pcs or size from the size we stamped it with our trademark - size by cm and the capacity by liter
And we stamped it with our name to be sure that from our production
and we had strong team for salesman we produce all the items of kitchen utensils, casserole& fry pan, rectangular pots with capsule pot & cutleries ( spoon- fork knife ) and round oven dish products for hard service and Cooke for army and house student & hospitals& hotel & traditional food for gulf area

Stainless Steel polish

Drawn low carbon steel wires & Galvanized wires , steel specification are according to AISI 1010 standard & ASTM A820

Xorex Corrugated Segment 0.7/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage.
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions.

Usage:
-Industrial floor slabs.
-Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas.
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations.
-Mass concrete and composite deck construction.
-Military Purposes.

End Hooked Steel Fiber 1.0/50
-Is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages
Prevent cracks due to early-age shrinkage.
Better cohesion in the fresh concrete.
Increase flexural strength and shear resistance.
Improve load capacity and concrete ductility.
Increase abrasion, fatigue resistance.
Enhance concrete in its hardened state.
Provide ultimate performance under intense conditions.

Price US$ 90.00 per tonne

Price US$ 90.00 per tonne

Price US$ 90.00 per tonne

We produce our Cooke ware pure stainless steel grade 304(18/10)
With high quality and automatic control system
All the utensils pot with side backlit handle different color (red - black - stainless steel handle)
Each pcs or size from the size we stamped it with our trademark - size by cm and the capacity by liter
And we stamped it with our name to be sure that from our production
and we had strong team for salesman we produce all the items of kitchen utensils, casserole& fry pan, rectangular pots with capsule pot & cutleries ( spoon- fork knife ) and round oven dish products for hard service and Cooke for army and house student & hospitals& hotel & traditional food for gulf area
Packing and shipment

ES TIG 80S-B6 is a 5Cr-0.5Mo-alloyed (ER80S- B6), copper-coated rod for the GTAW of creep-resistant steels of similar composition.

The rod is also suitable for welding high strength steels with a minimum yield strength of up to 730 MPa.

ES TIG 80S-B6 is suitable for applications in the chemical or petro-chemical industry and in the ammonia synthesis process.

It can also be used for heat exchangers, boilers, piping, and pressure vessels for temperature service up to 1110F (600C).

AWS has changed the classification for this product. The previous classification was A5.9 ER502.

Hello,
We offer all sizes of steel rebars and wire rods for very competitive prices, thank you.

Used rail scrap for ferrous recycling and steel reprocessing. Price varies widely by grade, condition, and bulk size.

Advantages
High Steel Content: Provides valuable ferrous material for steel production.
Strong & Durable: Railway rails are manufactured from high-strength steel, making them suitable for recycling.
Recyclable: Can be melted and reused in the production of new steel products.
Cost-Effective: Offers an economical alternative source of ferrous raw material.
Industrial Demand: Used by steel mills, foundries, and metal recycling facilities.
Reduced Waste: Recycling used rails helps recover valuable metal and reduces landfill disposal.

Origin: Zambia
Transit Route: Zambia to Dar es salaam Port
Destination Port: Upon Client Request

Copper Cathode is a high-purity form of copper metal, typically containing 99.99% copper (Cu), produced through electrolytic refining or electrowinning processes. It is cast into flat plates and serves as the primary raw material for manufacturing copper rods, wires, cables, tubes, and other industrial products. Due to its excellent electrical conductivity, corrosion resistance, and ductility, copper cathode is widely used in the electrical, electronics, construction, automotive, and renewable energy industries. It is the internationally traded benchmark product for refined copper.

Used Rail Scrap consists of decommissioned railway tracks manufactured from high-carbon steel, primarily available in R50 and R65 grades. It is widely used as premium feedstock for steel mills, foundries, and metal recycling industries due to its high steel content and excellent melting characteristics. Carefully processed to remove excessive contaminants, used rail scrap provides a cost-effective raw material for steel production and industrial manufacturing. It is supplied in bulk quantities under internationally accepted scrap trade specifications.

Key Specifications
Product Name Used Rail Scrap
Rail Grades R50 & R65
Material High Carbon Steel
Length 0.5 - 1.5 meters (Typical Cutting Length)
Rust Condition Light Surface Rust Acceptable
Contamination Free from Radioactive, Explosives & Hazardous Materials
Density Heavy Melting Steel Scrap
Form Cut Railway Rails
Supply Bulk Export

USES :
Fertilizers industry
Phosphoric acid
Insecticides industry
Iron steel industry

ES TIG 100S-G is a 0.5Cr-0.5Ni-0.2Mo-alloyed, copper-coated rod for the GTAW of high strength steels with a minimum tensile strength of 690 MPa.

The rod is also suitable for welding steels where good impact strength at low temperatures is required.

Product introduction:

Calcium is a silvery white metal that is harder and heavier than lithium, sodium, and potassium;

It melts at 815 C. The chemical nature of metallic calcium is very active. In the air, calcium is quickly oxidized and masked with an oxide film. When heated, calcium will burn and emit a beautiful glow of brick red. Calcium and cold water have a slower effect, and intense chemical reactions occur in hot water to release hydrogen (lithium, sodium, and potassium can cause intense chemical reactions even in cold water). Calcium is also easily combined with halogens,

sulfur, nitrogen, and the like.



1,product name:calcium metal

2,Shape :powder, lump and granulates

3,CAS:7440-70-2

4,Density:1.54g/cm

5,Melting point:850C

6,Boiling point:1440 C(lit.)

7,Application:Wheel keel



Product use:

At present, in the steel industry, the main use of metal calcium is to process into metal calcium particles, and then to make calcium iron wire or pure calcium wire, and finally used for steel refining outside the furnace, its role is to desulfurization, deoxidation, increase the fluidity of molten steel. Promote the rapid rise of inclusions in molten steel, generally used in the production of high-quality steel; as a dehydrating agent to produce anhydrous alcohol; in the petroleum industry, as a desulfurizing agent, in the metallurgical industry, it is used to deoxidize or

desulfurize . However, calcium compounds have a very wide range of uses, especially in the construction industry.

Raw iron ore
Size:- from mesh to 0.2cm
Quality:- from 65% to 80%
min qty order:- 25 ton

Advantages

Natural mineral source of iron for steel and iron production
Suitable for direct supply to mineral processors, pellet plants, and steel manufacturers
Available in lump, fines, and crushed forms
Can be supplied according to required Fe content, size, moisture, and impurity limits
Suitable for bulk shipments and long-term industrial supply contracts

Copper Cathode Manufacturer Supply

We are a reliable manufacturer and supplier of highquality Copper Cathodes for industrial electrical construction and metal processing applications Our copper cathodes are produced and supplied with a focus on consistent purity excellent conductivity dimensional stability and dependable quality for international buyers

Our Copper Cathode is suitable for manufacturing copper wire cables sheets tubes rods electrical components transformers motors and various copperbased products High electrical and thermal conductivity makes it an excellent raw material for demanding industrial applications

Product Specifications
Product Name Copper Cathode
Copper Purity Up to 9999
Grade Grade A Industrial Grade
Copper Content 9995 or as agreed
Appearance Clean smooth coppercolored plates
Shape Rectangular cathode sheets
Standard ASTM EN IEC or buyer specification
Application Wire cable tube rod sheet electrical products
Electrical Conductivity Excellent
Thermal Conductivity High
Surface Clean and free from excessive contamination
Packaging Standard export bundles with secure strapping
Loading Container or bulk shipment according to order requirements
Origin Available according to supplier documentation
Inspection Quality inspection available before shipment
Customization Specifications and packaging can be arranged according to buyer requirements
Key Advantages

High copper purity and consistent quality
Excellent electrical and thermal conductivity
Suitable for largescale industrial production
Reliable raw material for copper processing
Exportready packaging and handling
Flexible order quantities subject to supplier terms
Quality inspection and documentation available

Packaging Shipping

Copper cathodes are securely bundled and packed for international transportation to help protect the material during loading handling and delivery Shipping arrangements can be made according to destination order quantity and buyer requirements

Why Choose Us

We focus on consistent product quality competitive supply professional communication and reliable order handling Our team can support buyers with product specifications inspection arrangements export documentation packaging options and shipping coordination

Heavy melting steel scrap from railway tracks, R50-R65

Available Grades:
R50
R65
Mixed Rails

Key Specifications:
Length: 1.5m max
Width: 500-1500mm
Thickness: 50-65kg/m

Premium quality Black Sand sourced from natural mineral deposits and processed to meet international export standards. The material is rich in heavy minerals such as magnetite, ilmenite, iron sand, or other mineral concentrates depending on origin and buyer requirements. It is carefully screened, washed, and tested to ensure consistent particle size, purity, and low moisture content. Suitable for steel manufacturing, foundries, mineral processing, construction, abrasives, and other industrial applications.

Custom specifications and packaging are available for bulk export orders.

A nickel-based, corrosion- and heat-resistant, 22% Cr, 9% Mo, 3.5% Nb rod for the GTAW of high-alloyed steel, heat-resistant steel, corrosion-resistant steel, 9% Ni steels and similar steel with high notch toughness at low tempera- tures.

It is also suitable for joining dissimilar metals of the types mentioned above.

ES TIG NiCrMo-3 is normally welded with pure Ar as the shielding gas.

A nickel-based, corrosion- and heat-resistant, 20% Cr, 3% Mn, 2.5% Nb rod for the GTAW of high-alloyed steel, heat-resistant steel, corro-sion-resistant steel, 9% Ni steels and similar steels with high notch toughness at low temperatures.

It is also suitable for joining dissimilar metals of the types mentioned above.

ES TIG NiCr-3 is usually welded with pure Ar as the shielding gas.

ES TIG 90S-G is a 2.5Cr-1.0Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels such as pipes in pressure vessels and boilers of similar composition, Steam Genera-ting Power Plant with service temperatures of up to 600C, but it is also suitable for welding high strength steels.