Find Verified Steel Fibres Suppliers, Manufacturers and Wholesalers

AFT Round Wavy Steel Fiber 0.8/55 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage .
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions

Usage:
-Industrial floor slabs
- Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas .
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations .
-Mass concrete and composite deck construction.
-Military Purposes

Steel fibers are manufactured to deliver high tensile strength, effective crack control, and structural contribution in fiber-reinforced concrete.

Steel fibers are commonly used to:
Enhance post-cracking behavior
Improve load distribution
Reduce or replace conventional steel mesh
Increase impact and fatigue resistance

End Hooked Steel Fiber 1.0/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage .
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions

Usage:
-Industrial floor slabs
- Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas .
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations .
-Mass concrete and composite deck construction.
-Military Purposes

Xorex Corrugated Segment 0.7/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage.
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions.

Usage:
-Industrial floor slabs.
-Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas.
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations.
-Mass concrete and composite deck construction.
-Military Purposes.

Product - Steel Coils

Product Name
Galvanized steel coil
Metal Base
SPHCï¼?SPCC, SPCD, SPCE, ST12-15, DC01-06, Q195A(B)-Q345A(B)
Thickness
0.9mm/1mm/1.2mm
Width
600mm to 1500mm
Length
According to Customerâ??s Requirement or Cut into Sheet
Zinc Coating
20-275g/m2



Color Series
RAL Color Number
Coil Weight
2MT----10MT/Coil
Coil Internal Diameter
508----610mm
Application
Roofing Sheets, Home Electrical Appliance, Structural Materials, Commercial Use, Industry.
Package
Standard Export Package (Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)
Place of Origin
Durban, South Africa

Electro Galvanized Iron Wire
Specifications:
high quality electric galvanized iron steel wire for binding 20 gauge

wire gauge size SWG(mm) BWG(mm)
8 4.05 4.19
9 3.66 3.76
10 3.25 3.40
11 2.95 3.05
12 2.64 2.77
13 2.34 2.41
14 2.03 2.11
15 1.83 1.83
16 1.63 1.65
17 1.42 1.47
18 1.22 1.25
19 1.02 1.07
20 0.91 0.84
21 0.81 0.81
22 0.71 0.71

Galvanized wires various diameters in spool , steel specification are according to AISI 1010 standard & ASTM A820

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Wheelchair

This wheelchair is designed to provide reliable mobility, comfort, and ease of use for individuals with limited movement. Built with a sturdy frame and ergonomic design, it offers excellent support for daily indoor and outdoor use. The wheelchair features smooth maneuverability, comfortable seating, and durable construction, making it suitable for hospitals, care facilities, rehabilitation centers, and personal use. Its practical design ensures user comfort while allowing caregivers to assist with minimal effort.

Specifications:

* Frame Material: High-strength steel or aluminum alloy
* Seat Material: Durable nylon or breathable fabric
* Seat Width: 16-20 inches
* Seat Depth: 16-18 inches
* Overall Width: 24-28 inches
* Weight Capacity: Up to 100-150 kg
* Rear Wheel Size: 22-24 inches
* Front Caster Size: 6-8 inches
* Folding Design: Yes
* Armrest Type: Fixed or detachable
* Footrest Type: Swing-away and adjustable
* Braking System: Manual wheel locks
* Cushion: Comfortable padded seat and backrest
* Mobility Type: Self-propelled or attendant-propelled
* Application: Medical, rehabilitation, and personal mobility support

Xorex Corrugated Segment 0.7/50 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages:
-Prevent cracks due to early-age shrinkage.
-Better cohesion in the fresh concrete.
-Increase flexural strength and shear resistance.
-Improve load capacity and concrete ductility.
-Increase abrasion, fatigue resistance.
-Enhance concrete in its hardened state.
-Provide ultimate performance under intense conditions.

Usage:
-Industrial floor slabs.
-Warehouses , Factories.
-Commercial and Residential S.O.G. and screed flooring.
-Bridge decks, overlays and pavements.
-Concrete Roads, Parking Areas.
-Precast concrete applications and slabs on pile.
-Shotcrete.
-Tunnel, linings and slope stabilizations.
-Mass concrete and composite deck construction.
-Military Purposes.

EESF�® AFT Round Wavy Steel Fiber 1.0/55 is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths

Advantages
Prevent cracks due to early-age shrinkage.
Better cohesion in the fresh concrete.
Increase flexural strength and shear resistance.
Improve load capacity and concrete ductility.
Increase abrasion, fatigue resistance.
Enhance concrete in its hardened state.
Provide ultimate performance under intense conditions.

Steel Coils are widely used in construction, manufacturing, automotive, fabrication, and industrial applications due to their excellent strength, durability, and flexibility. These coils are produced with smooth surface finishing and consistent thickness to ensure reliable performance in various processing operations such as cutting, bending, welding, and forming. Designed for long-term use, Steel Coils provide strong resistance to wear and mechanical stress, making them suitable for heavy-duty applications.

Manufactured using high-quality steel material, these coils offer excellent dimensional accuracy and stable mechanical properties. They are available in different thicknesses, widths, and grades to meet diverse industrial requirements. The product is suitable for roofing panels, structural components, pipes, machinery parts, storage tanks, and general engineering purposes.

Specification Points:

Material: High Quality Steel
Shape: Coil
Surface Finish: Smooth and Uniform
Thickness Range: Customizable
Width: Various Sizes Available
Coil Weight: As Per Requirement
Tensile Strength: High
Corrosion Resistance: Good
Application: Construction, Manufacturing, Industrial Use
Feature: Durable, Strong Structure, Long Service Life

Steel Coils are carefully processed and packed to maintain product quality during storage and transportation while ensuring dependable performance for industrial and commercial use.

Drawn low carbon steel wires & Galvanized wires , steel specification are according to AISI 1010 standard & ASTM A820

End Hooked Steel Fiber 1.0/50
-Is a low carbon, cold-drawn steel wire designed to reinforce slab on grade concrete and enhance reinforced constructional elements with shrinkage crack control, improve shear resistance, and increase tensile and flexural strengths.

Advantages
Prevent cracks due to early-age shrinkage.
Better cohesion in the fresh concrete.
Increase flexural strength and shear resistance.
Improve load capacity and concrete ductility.
Increase abrasion, fatigue resistance.
Enhance concrete in its hardened state.
Provide ultimate performance under intense conditions.

SPECIFICATIONS:

the following Percentage Points:

Chemical Composition

Carbon - 0.54 to 0.82%

Phosphorus - 0.035% max

Manganese - 0.60 to 1.05%

As. - 0,01max of Mass share

Silicone - 0.18 to 0.40%

Sulphur - 0.035% max

Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75

The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)

Used Rails shall be considered free of alloys when the residual alloying elements do not exceed

Cut to 1.5 meter length (standard)



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Used Rail Scrap consists of decommissioned railway tracks manufactured from high-carbon steel, primarily available in R50 and R65 grades. It is widely used as premium feedstock for steel mills, foundries, and metal recycling industries due to its high steel content and excellent melting characteristics. Carefully processed to remove excessive contaminants, used rail scrap provides a cost-effective raw material for steel production and industrial manufacturing. It is supplied in bulk quantities under internationally accepted scrap trade specifications.

Key Specifications
Product Name Used Rail Scrap
Rail Grades R50 & R65
Material High Carbon Steel
Length 0.5 - 1.5 meters (Typical Cutting Length)
Rust Condition Light Surface Rust Acceptable
Contamination Free from Radioactive, Explosives & Hazardous Materials
Density Heavy Melting Steel Scrap
Form Cut Railway Rails
Supply Bulk Export

Tamarind Fresh Without Fibre