Find Verified Polyethylene Fabric Suppliers, Manufacturers and Wholesalers

Polyethylene glycol (PEG) is a clear, colorless, odorless liquid that is soluble in water.
It is used as a laxative to treat constipation, as well as a lubricant in medical procedures.
PEG is also used in a variety of industrial applications, such as in cosmetics, food products, and pharmaceuticals.
SUPERSONIC DISTRIBUTIONS & SERVICES PVT. LTD. is a leading supplier of PEG in India, and we offer a wide range of products to meet your needs.

PE Granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material.
Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature.

We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.

1)Chemical Characteristic� :� Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for�  liquid paraffin, natural paraffin etc.
2)� Properties:� White particle,flake or powder, with good lubricant effect,� chemical durability and good electrical performance, soluble in aromatic hydrocarbon.

Polyethylene glycol 4000 is a white waxy solid flake or granular powder, non-toxic and non-flammable, transported as general chemical and stored sealed in a dry place. It has strong plasticity, film-forming properties, and the ability to improve drug release from tablets. In coating stripping, it often used as an evaporation retardant, it is widely used as a binder for manufacturing tablets, making the tablet surface glossy and smooth, resistant to damage sticking. Moreover, its consistency can be adjusted by adding liquid polyethylene glycol, and it can be used as a suppository base, offering many advantages over lipophilic bases. For example it can be used to prepare suppositories with higher melting points that can withstand the effects of high-temperature weather; drug release is not affected by the melting point; and it has physical stability during storage.

PRODUCT

POLYETHYLENE
1.) Dripple (PE)
2.) Blue Elteks (PE) Granules
3.) Red Kasa 668 (PE)

PRODUCT

POLYETHYLENE
1.) White Eltex (PE)
2.) Elastomer (PE)
3.) Teffaf (transparent PE)

Various woven fabrics with classic and modern designs, such as cotton, linen, woolen, polyester, bamboo fiber, silk, tencel, etc.

Fabric Processing

Processing Capacity: 121 Million Meters Per Annum

Primarily focused on dyeing and processing our own fabric, we are equipped with state-of-the-art machinery, making us one of the most modern fabric processing facilities.

We are a leading fabric manufacturer, producing high-quality textiles with a perfect blend of durability, aesthetics and sustainability. With cutting-edge technology and eco-friendly practices, we deliver premium fabrics that meet global standards.

Premium Quality Fabrics, Available in any quantity.

Sample Specifications Just for Reference.
_____________________________________
90GSM PP Polyester
140GSM PP Polyester
160GSM Selina
160GSM Dot Knit
160GSM Honeycomb
100% Cotton Bio washed, 25s Count, RL Yarn, 180GSM
100% Cotton Single Tex 240GSM
OE Polycotton 180GSM
OE Polycotton 220GSM
OE Fleece 280GSM
100% Cotton Fleece 280GSM, Cotton Bio washed
50S RL Interlock
40s 20Dr RL Lycra Jersey
25s 40% Poly 60% Cot Airtex ST/DT
25s 40% Poly 60% Cot Single Jersey
25s 40% Poly 60% Cot Loopknit UnRaise
Mars Dri fit 200GSM
2 way Lycra 180GSM
4way (Nike) Lycra 220GSM
-------------------------------------
Cost eg - The Basic cotton can cost be determined depending on the GSM and printing.

Country of Origin - India
Port of Loading - Cochin & Chennai Ports.
All Products are certified and are quality oriented.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc.

2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products.

3.Polyethylene glycol series products can be used as raw materials for ester surfactants.

4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry.

5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface.

6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler.

7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity.

8.PEG-4000 and PEG-6000 .

9.PEG8000 .

LDPE (Low-Density Polyethylene)

Specifications:

Appearance: Translucent or white granular pellets, flexible

Material Type: Low-Density Polyethylene (LDPE)

Density: 0.91 - 0.94 g/cm�³

Melt Flow Index (MFI): Typically 1-10 g/10min (varies by grade)

Melting Point: 105�°C - 115�°C

Tensile Strength: 8-15 MPa

Uses:

Packaging (e.g., plastic bags, shrink wraps, and flexible film)

Disposable products (e.g., plastic gloves, food wraps)

Manufacturing of bottles, toys, and containers

Insulation for wires and cables

Recycling: Fully recyclable; commonly recycled into trash bags, floor tiles, and more

Packing:

Available as per buyer's request (e.g., 25kg bags, 50kg bags, 1-ton jumbo bags, or customized packaging)

Price:

$1,000 CIF/MT (Cost, Insurance, and Freight per Metric Ton)

$950 FOB/MT (Free on Board per Metric Ton)

Polyethylene glycol, also known as polyethylene glycol or polyoxyethylene glycol, is a highly polymerized mixture. Common types of polyethylene glycol currently include polyethylene 200, polyethylene glycol 400, polyethylene glycol 600, polyethylene glycol 4000, and polyethylene glycol 6000. them, polyethylene glycol 400 is a colorless or almost colorless viscous liquid; it is easily soluble in water or ethanol. Our company's production method utilizes high- polyethylene glycol 400 as a raw material, employing refining techniques to improve the quality indicators and enhance the quality of polyethylene glycol 400, so as to meet the requirements of the Chinese Pharmacopoeia (2020 Edition).

Fabric & Textile products is still needed throughout the world, it can have significant impact on price increases.
We provide this Fabric & Textile on an ongoing basis and can serve exports to your country.

With quality packaging and production processes, making the products we sell have selling points that are not only economical but also safe.

With our full support we help you become an importer of the products we sell.

We, Nif International, hope to be the best export-import partner for you around the world.

Fabric available- 100% cotton, 100% Linen, Poly cotton, Viscose, Satin, Rayon Twill etc.
Width- 36-58"
Design- Printed, Plain, checks etc.
Price- $0.8-$3/- FOB New Delhi or as per quality.
We shall be glad to serve you.
Bulk qty only.

Shirting fabric

Fabric- Cotton, poly cotton, twill, Lycra, satin etc
Printed, check, plain
Width- 36&58"
Length- 100CMs

Shirting fabric

Fabric- Cotton, poly cotton, twill, Lycra, satin etc
Printed, check, plain
Width- 36&58"
Length- 100CMs

* In various GSM, Colors and Widths.

* SMMS fabric also available.

* Raw material: 100% Polypropylene

* In various GSM, Widths and Colors