Find Verified Lubricants Suppliers, Manufacturers and Wholesalers

Aluminum Pressure Cookers - Inner Lid and Outer Lid with different thickness and dimensions

Modified Lecithin
Modified soybean phospholipid is made from concentrated soybean phospholipid by chemical modification. It has good hydrophilicity and oil-in-water emulsification. The content of acetone insoluble matter is the same as that of natural crude phospholipid. However, its emulsification and hydrophilic properties are significantly improved compared with concentrated soybean phospholipids, and it has greater advantages in feed addition performance, liquid feed preparation and energy digestion and absorption.
1. Nutritivity
Modified soybean phospholipids can provide nutrients and energy substances necessary for organisms, and are very important for animal growth and development, and are ideal nutritional supplements for feed production. Its functions and roles are:
1.1 As a fat substitute, improve feed energy. The heat energy of modified phospholipids is 7500 ~ 8000 kcal/kg, which is close to vegetable oil. The quality of meat, eggs and milk produced is better than that of products using animal fat as energy source, which is beneficial to human health.
1.2 Provide choline, inositol, phosphoric acid and other nutrients to improve the nutritional value of feed.
2. Emulsification
The emulsification property of phospholipid was obviously improved by modification technology. Thus improve the digestibility of nutrients and improve feed efficiency.
2.1 When adding phospholipids to prepare artificial milk such as calves and piglets, the fat dispersion can achieve the best effect.
2.2 For young shrimp, it can make up for the low fat digestion ability caused by the lack of bile, prevent the high death rate of young shrimp, and improve the survival rate of adult shrimp.
2.3 It helps animals to digest and absorb fats and fat-soluble vitamins, thereby improving the quality of meat, eggs and milk and increasing the value of commodities.
3. Antioxidant properties
Modified soybean phospholipids have strong antioxidant properties, which can reduce the risk of mold, prolong the storage life of feed, and protect the polyunsaturated fatty acids in feed.
4. Suspension
The product has a stabilizing effect on the fat dispersed in the water and also prevents the sedimentation of the insoluble components suspended in the emulsion. The spherical bait with phospholipid added is conducive to suspension in water, convenient for fish and shrimp to eat, and improve the utilization rate of feed.
5. Cohesiveness
The feed mixture in the form of coarse meal is easy to produce powder and cause loss. The addition of modified soybean phospholipid can play a bonding role, reduce dust, prevent feed automatic classification and keep feed evenly mixed state.
6. Lubricity
Modified soybean phospholipid has better lubrication characteristics, which can reduce feed loss during extrusion molding, reduce equipment wear, improve granulation yield and particle quality, and reduce energy consumption when producing pellet feed. It is a good feed processing aid.

Name: Muscovite mica, Phlogopite mica, biotite mica, Calcined/dehydrated Mica

Description: Mica is a group of aluminum silicate minerals with layer-structure, and rich in elements of potassium(K), aluminum(Al), magnesium and lithium etc.

Appearance: White(Muscovite)/black(Biotite)/golden(phlogopite) powder, flakes, scraps or sheets

Size: 5-10mesh, 10-20mesh, 20-40mesh, 40-60mesh, 60-100mesh, 100mesh, 200mesh, 325mesh, 400mesh, 600mesh, 800mesh, 1000mesh, 1250mesh, 2500mesh  

Chemical composition:

Item SiO2 AI2O3 K2O Fe2O3 CaO Na2O MgO H2O
Content% 44-50 20-33 9-11 2-6 0.02-0.77 0.6-1.8 0.3-2 2-3


Specification:
Size Over Sieve% Fe ppm Sand Loose
Density Water Whiteness Dia-Thick-ness
Application:
1.      It is prior filler in paint and coating.
2.      It is applied in protecting layer of welding rods, conducting wires and electric cables.
3.      It is the basic raw material for mica porcelain products.
4.      It can be used as suspended substance in fire-fighting dry powder.
5.      It can be taken as filler, shelter, lubricating substance, a drawing of patterns in plastics,rubber, asbestos products and sealing materials.
 
Packing: 25kg, 50kg, 500kg, 1000kg bag or as customer's requirements, 20mts in 20FCL
Mica:
Mica is stratiform mineral ,Its composed of potassium (K), aluminum (AI),magnesium (Mg),Iron(Fe) and lithium(Li).There are different categories of mica, including white mica, phlogopite, biotite and lepidolite (Lithia mica)
White mica is widely used in industry and national defense because it is elasticity, tenacity and insulativity. it is also acid and alkali resistant, and corrosionproof, which can be stripped, with low coefficient of expansion etc.
Jinli Minerals have successfully developed another category of mica powder, which is smooth on the surface of flakes, thick in layer, regular in shape with strong adhesion and slipperiness, widely used in many Chinese and foreign prestigious enterprises.
The Main Use and Functions:
Used in decorating, paint and coating.
Mica powder is the basic raw material for mica ceramics products.
It can be used in fire-fighting dry powder, protecting layer of welding rods, conducting wires     and electric cables.
It can be taken as a filler, shelter, lubricating substance, drawing of patterns in plastics, rubber, asbestos products and sealing materials. It can also be used as a filler in degreasing agent of cosmetics, in insulating materials of high-frequent electric waves and acid-durable products. It can be used as coating in models of forcasting metal, the brightening material in aluminium and paint in electroplating bath.

SDKF Bearing Details:

Size: 20x47x14 mm
Material:Chrome steel/GCr15/SAE52100/100Cr6/SUJ2
Quality: P0, P6, P5
Clearance: C0, C3, C4
Vibration: Z1, Z2, Z3
Sealing: OPEN / ZZ = Iron seals, on both sides / 2RS = rubber seals, on both sides / 2RZ = non-contact rubber seals on both sides
Packing: Single box + Paper carton + Pallet/ Industrial packaging + Paper carton + Pallet
Service: OEM/ODM


SDKF Bearing Feature:
1. High accuracy. High speed. Competitive price.
2. ISO 9001:2008
3. Standard and non-standard deep groove ball bearings.
4. Technology: low vibration, low noise, high precision and durability.
5. 3-7 days for stock order and 10-25 days for production
6. Fast delivery
7. Rich experience in foreign trade

SDKF Description:
E�?sam[at]sdkf-bearing[dot]com
1. SDKF deep groove ball bearings are the most representative and widely used bearing. It can accommodate axial loads in both directions, in addition to radial loads, even at high speeds. They are available for low noise and low vibration. Bearings with metal shields and rubber seals are pre-lubricated by some grease. Bearing with snap ring and flange on the outer ring. Deep groove ball bearings with filling slots have the same dimensions with standard ones. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots.

2. SDKF shielded deep groove ball bearings: One of the most commonly used bearings, these types are manufactured with shields inserted into the outer raceway, these fit in closely to the inner race providing protection against light mechanical damage, some protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing.
Shields can be easily removed for applications that only require 1 shield
Benefits: Provides light mechanical protection, limits moisture and dirt ingress, lubricated for life, cost effective solution

3. SDKF deep groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.
The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).
Deep groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.

SDKF Bearing Details:

Size: 25x52x15 mm
Material: Chrome steel/GCr15/SAE52100/100Cr6/SUJ2
Quality: P0, P6, P5
Clearance: C0, C3, C4
Vibration: Z1, Z2, Z3
Sealing: OPEN / ZZ = Iron seals, on both sides / 2RS = rubber seals, on both sides / 2RZ = non-contact rubber seals on both sides
Packing: Single box + Paper carton + Pallet/ Industrial packaging + Paper carton + Pallet
Service: OEM


SDKF Bearing Feature:
1. High accuracy. High speed. Competitive price.
2. ISO 9001:2008
3. Standard and non-standard deep groove ball bearings.
4. Technology: low vibration, low noise, high precision and durability.
5. 3-7 days for stock order and 10-25 days for production
6. Fast delivery
7. Rich experience in foreign trade

SDKF Description:
E�?sam[at]sdkf-bearing[dot]com
1. SDKF deep groove ball bearings are the most representative and widely used bearing. It can accommodate axial loads in both directions, in addition to radial loads, even at high speeds. They are available for low noise and low vibration. Bearings with metal shields and rubber seals are pre-lubricated by some grease. Bearing with snap ring and flange on the outer ring. Deep groove ball bearings with filling slots have the same dimensions with standard ones. Filling slot bearings have a higher radial load carrying capacity than bearings without filling slots.

2. SDKF shielded deep groove ball bearings: One of the most commonly used bearings, these types are manufactured with shields inserted into the outer raceway, these fit in closely to the inner race providing protection against light mechanical damage, some protection against the ingress of moisture, dust and other foreign matter and serve to retain the pre-filled grease in the bearing.
Shields can be easily removed for applications that only require 1 shield
Benefits: Provides light mechanical protection, limits moisture and dirt ingress, lubricated for life, cost effective solution

3. SDKF deep groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.
The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).
Deep groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.

Model PSX-300

Technical Parameter

1.Capacity18000BPH.(500ML).

2.Bottle MaterialPET,Glass,MetalPEHDPE.


3.Label Roll Inner Diameter6 inches (152 mm).

4.Bottle Diameter30-200 mm.

5.Bottle Height100-500 mm.

6.Label Height10-250 mm.

7.PowerAC 3Ï?, 380V/50HZ.

8.Air Consumption3-6 kg/cm²

9.Power Consumption16 KW.

10.Main machine size: 2200L*2300W*2000H(mm).

Features:

1.Auto cutting and Sticking circle or half circle of bottle. Auto melting and attaching glue on top and rear of the label , glue auto recycling .

2.Variable speed control system, synchronous automatic detection system, automatic adjust production speed, Always make the labeling machine at best production speed


3.Star Wheel separation and feeding ,correlation design transmission mode high-speed labeling, stable precision.

4.Servo motor synchronous tracking, with special designed vacuum drum adsorption, labeling precise and stable

5.Abnormal situation, this machine has safety device, automatic stop immediately.

6.Following conditions the machine will automatically stop and alarm:
(1) Label is not labeled on bottles
(2)Label sticker failure
(3)Label is about to run out
(4)Abnormal bottle feeding
(5)Abnormal bottle out
(6)Abnormal bottle jam

7.The whole machine centralized lubrication system, easy to clean, lubrication and maintenance.

8.Techmach electronic automatic rectify guide system, digital electronic eye for ultrasound method.Non-contact electric eye, automatically adjust the label location. (optional).

9. Label top and end difference within 2mm ( without Techmach), 1mm with techmach


Shanghai Xinhua was founded in 2006 in Shanghai China and celebrated its 10th anniversary in 1016 as a Chinese leading manufacturer of shrink sleeve applicators,and heat shrink tunnels for the worldwide packaging industry.Especiaaly in te auto shrink sleeve labeling plastic cup,tapes.we have accumulated more than ten years experience,we have a complete set of auto packaging production line for cup and tape sleeving,moreover we are the market leader,our equipment is widely praised at home and abroad.
SHANGHAI XINHUA CHINA Auto shrink label Sleeve applicator Machine is for applying heat shrinkable sleeve label or neckbands which is commonly used on various packages ranging from boottles,cups,tapes,jars and other containers.Shrink sleeves can wrap and conform to a container's every curve, enabling complete decoration of unusual shapes from top to bottom with 360 degrees.Shrink sleeves are widely used to decorate everything from foods,beverages,cosmetic,medical and even personal products like Shamppo lip sticks eye drop,etc.

700 kg per hour complete wood pellet line with best price


Except 700 kg per hour wood pellet line, we can also offer 800 kg per hour wood pellet line, 900kg per hour wood pellet line, 1000 kg per hour wood pellet line, 1500kg per hour wood pellet line, complete 2000 kg per hour wood pellet production line.



Layout for complete wood pellet production line with different capacity for your choose:

complete_wood_pellet_line_700kg_per_hour.jpg

If your raw materials are wood logs, then the wood pellet making line should start from wood chipper machine which is used to crush wood logs into wood chips. If wood chips moisture is higher than 20%, then a rotary drum dryer machine should be used.



For a rotary drum dryer machine, we normally suggest customer suitable model depend on its initial moisture, end moisture and hourly capacity in the complete wood pellet line you want.



As we know, wood chips can not be put into pellet machine directly, it should be crushed into wood sawdust first befor coming into the dryer machine. For hammer mill, we have single shaft hammer mill and dual shaft hammer mill for your choose.



In this 700 kg per hour wood pellet line, a small vertical ring die wood pellet machine with 45 kw power and 700kg per hour model will be suggested to suit this complete pellet line. Here, i want to introduce it detaily. Small vertical ring die wood pellet machine is very hot selling in china because of its high capacity with less power consumption. This vertical ring die pellet mill is installed with automatic lubrication system to lubricate inner spare parts of this pellet machine to make sure pellet machine all spare parts have a long life span.



This small 700 kg per hour wood pellet machine feed raw materials vertically, raw materials centrifugal. No stuck, no jamping.Pellet machine internal with two roller and one die. Rollers move, die stable , pellets can be formed in a very easy way.

vertical ring die rice husk pellet mill (3).jpg

Pellet cooler, we will suggest a suitable pellet cooler with 700 kg per hour to meet this pellet line.



Pellet packing machine is used to pack pellets in ton bag or into 15 -50 kg plastic bags. We have thread closed and hot air sealed packing machine for your choose.

Scope
Test standard: ASTM D892
This instrument is used to determine the tendency and stability of oil to produce foam, such as fuel oil, lubricating oil, gear oil, hydraulic oil.

Features
1, the instrument uses a high-precision digital display temperature control mode, with high temperature control, display intuitive
2, automatic temperature control, automatic timing, air source and gas flow centralized control system, easy to operate
3, high technology content, and with a digital electronic timing function
4, the instrument uses a split, integrated combination, easy to move
5, configure the dedicated refrigeration system to meet the needs of experimental low temperature
6, the instrument configuration dedicated green pump system, no external air supply

Technical Parameters
1, power supply voltage: AC220V ± 10% 50Hz
2, FDT foam properties thermostatic bath temperature: 24 ?? 93.5 ??
3, the heater power: 2500W (93.5 ?? bathtub) 800W (24 ?? bath)
4, temperature measurement devices: platinum resistance (PT100)
5, the gas diffusion head diameter: 25.4mm ± 0.02
6, diffuser air permeability: at 2.4KPa (250mmH O) pressure is 3000 ~ 6000mL / min
7, experimental cylinder specifications: 1000mL (special cylinder)

Sodium Tripolyphosphate
1.yname: Sodium Tripolyphosphate
2.Molecular formula:Na5P3O10
3.Molecular Weight: 367.86
4.Properties: White powder; Melting point 622â??; Easily soluble in water; It has got salient chelating capacity to ions of Ca and Mg etc. and can soften hard water to make suspension solution become into clear solution; It has got weak alkalinity but no corrosiveness. It is a surfactant, and has got outstanding emulsification to lubricants and fat.
5.Uses:Used as one of the main auxiliaries for synthetic detergent, synergist for soap; water softener, tanning agent for leather making, auxiliary for dyeing; As an effective dispersion agent for suspension solutions of coatings, kaolin, magnesium oxide, calcium carbonate and drilling mud etc.; As an oil contamination resistance agent in paper production. In foodstuff industry it is used as quality improver in the process of canned food, fruit juice drinks, foodstuffs from milk or soybeans. It may tender the meat in canned ham and soften the skin of horse bean in canned horse bean. It may also serves as a softener or densifier in foodstuff industry.
6.Packing:In 25Kg net WPP/PE bags.
7.Storage:It must be prevented from Damp


ness and water. Don't store it in the open air.

Place of origin: henan, china (mainland)
Brand name: dashan
Model number: oem
Type: flange brass bushing
Material: brass
Processing: cnc machining
Machine type: cone crusher
Drawing: yes
Application: air purification equipment
Oem: welcome
Lead time: according to required time
Size: various
Qc control: 100% inspect by us, accept the third party inspect
Lubricant: oiling
Product property: durable and stable

Special packaging , oiling the surface rust, covered with a layer of thin-film anti-wear, boxing stand on end, compression and shock, fumigation-sheet pack.

The product uses advanced production technology - centrifugal casting, produced by the copper sleeve, bearing and sand can significantly improve compared to the tightness of castings, abrasion resistance, and has good tensile strength, flexion strength and elongation , but not a phenomenon as sand casting sand holes and other phenomena, is a lot of choice for mechanical products supporting the use .



Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. In comparison, bronze is principally an alloy of copper and tin.

Highlights:
1)resistance against corrosion
2)germicidal & antimicrobial properties
3)malleability & acoustic properties

Structure:

The valve is made up of all welded body and PTFE gasket, can run long life under the condition of frequent operation¡¡éimpurities and chemicals.

Fine grinding stainless steel sphere can guarantee for years to open and close freely and reliable operation.

The structure of floating ball,.The elastic washer in the slope can guarantee for the sealing ring compression on the sphere,the valve can guarantee closely even though in the case of pressure is not stable.

Containment spindle is made up of two o-ring seals,The top of small diameter of the valve can be changed.

Both can be replaced of DN65--DN300.

THE PTFE thrust washer is between the stem shoulder and stem chamber,it also can play the role of sealing.

The stem chamber of the ball valve that more than DN65 equipped with stainless steel bearing.

Features:

Don't need maintenance, adjustments and lubrication,Easy to install,Long-term reliable operation in the Low operating cost.

The valve stem can be longer, easy to heat preservation.

Operating handle can be removed, reversing the installation.

The body does not contain heavy and unreliable castings.

It is very convenient of the install mediation organization.

The curve of the pressure/temperature (Not suitable for steam)






wooden box with filling or according customer's requirement

HSN Code : 29173910
Synonyms : Phthalic acid ester of butanols mixture, DBP
CAS No. : 84-74-2
Molecular Formula : C16H22O4
Application :
Di-Butyl Phthalate is a colorless or light yellowish, odourless or slight aromatic, ester odour oily liquid with low toxicity and wide liquid range. It is produced by the reaction of n-butanol with Phthalic anhydride. DBP is used in cosmetics as a perfume solvent and fixative; a suspension agent for solids in aerosols; a lubricant for aerosol valves; an anti-foamer; a skin emollient and plasticiser in nail polish and fingernail elongators (extensions).
DBP  has got excellent application as a Plasticizer in PVC Nitrocellulose Lacquers, Plastics, Water Tubing , Footwear, Synthetic Resins Synthetic Rubber Compounds & Sheets , Rubber Hoses, Automobile Parts& Accessories and Rubber Erasers etc.
DBP� is used in safety Glass Industries where Film Layers are used to strength the glass.
DBP� is in manufacturing of Polymer Emulsions for Adhesives (Fevicol Type) in Textile Wet Processing Products, Paper Coating Industries.
DBP� is used in Pesticide Industries as a Solvent and is used as a Mite Repellent.
DBP is used in Surface Coating Industry i.e, Paints & Pigments and in Printing Inks.
DBP  is used in Epoxy Sealants, Floor Polish & Sealers.

1: Gearbox adopts oil lubricant design make maintain easy, and abrasion uneasy.
2: Crease free and easy folded with tubular fabric open width subsystem
3: High quality of cylinder with inserted trick walls and GROZ-BECKERT knitting needles used reduce wear
4:The no-crease open-width system: The machine adopts the latest winder system and is equipped with the roller shifting device to ensure the uniform stitch density of fabric. The operation is easy and convenient. It effectively removes creases in cloth caused by common winders, and makes it suitable for double air layer fabric material of chemical fibers and cotton, such as the high quality nylon, polyester and filament.
5: Combining the characteristics of double jersey and crease-free for cloths from knitting machines. High fabric output, equipped with a large diameter cylinder and high-speed motor; automatic cutting system to ensure unnecessary fabric loss.
6:Equipped with 2 tracks dial cams and 4 tracks cylinder cams, just change the camsâ?? arrangement, then you can change the fabric patterns to meeting the market need.
7: The material of cams is made by special imported heating disposal and designed by CAD/CAM to ensure the needle can running smoothly to prolong the needle life.

Our company supplies and wholesales palm oil, as well as other fats and oils. We offer rapid and efficient service to our asian and world-wide customers. We have in house quality controls for all the incoming and outgoing products. We use the most up to date methods prescribed by u.S.P., f.C.C., a.O.C.S., a.S.T.M., and via gas chromatography to verify that our oils and fats meet the required specifications and industry standards. Please contact us for great prices, fast delivery and proven quality.

More info on palm oil

Oil from the fruit of a palm tree, (elaeis guineensis), native to tropical west africa and cultivated in africa, indonesia, malaysia, and tropical america as the source of palm oil. The palm oil contains a very high percentage of saturated fat. Growing to a height of 15 m, the palms produce fleshy fruits, 3 cm long, containing a white kernel within a hard black shell. Palm oil is extracted from the pulp and kernel and used in making soaps, margarine, lubricants, etc. When used in soaps, palm oil creates a hard, long lasting bar of soap that is mild and cleanses well. Palm oil has similar characteristics to tallow in soaps.

https://www.bernyeangroup.com/products/roots-vacuum-pump.html

Roots Vacuum Pump
Roots vacuum pump is a rotary variable displacement vacuum pump. Its working principle is to use two blade-shaped rotors rotating synchronously in opposite directions to perform suction and exhaust operations in the pump housing.
Product Description
Roots Vacuum Pump is a dry Positive Displacement Pump. They operate on the Roots principle, which is similar to that of rotary vane pumps. These pumps are the ideal solution when fast pumping speeds are required. In the case of contactless, oil-free compression Roots booster pumps, two symmetrical cams rotate in the working chamber. During this process, the rotating blades do not come into contact with each other or the housing. Roots Vacuum Pumps are often used in pumping stations in combination with oil-lubricated rotary vane pumps to achieve very high volume flows and deep final vacuums.



Features
1. Air cooling. Pressure rises to -50 kpa

2. Small size, lightweight, dual-purpose for both vertical and horizontal use, convenient to replace European and American models

3. High-speed, energy-saving

4. Belt self-tensioning technology, easy to use and maintain

5.Impedance-integrated composite muffler with good noise reduction effect

Expansible graphite is produced by our company high-quality natural phosphorus sheet graphite, after special modification and obtained a flexible graphite product, is an ideal new sealing material, in the petroleum, chemical industry, electric industry, aviation, automobile, ship and instrumentation and other industries dynamic, static sealing has a wide range of applications.

Expandable graphite by high temperature instantaneous treatment, scale-like into vermicular, volume can be expanded 100-400 times, this expanded graphite still maintains the nature of natural graphite, and has good molding plasticity, flexible ductility and sealing, is a variety of graphite plates, seals of high quality raw materials, can also be used for metallurgical industry of new protection slag, heating agent.

Varieties: 9950250 9980250 9950200 9980200 9550250 9580200 etc
Size: 32 mesh 50 mesh 80 mesh 100 mesh -100 mesh -200 mesh -325 mesh
Expansion rate: 100-400ml/g
Performance: With good expansibility, the finished product has high temperature resistance, radiation protection, heat insulation, lubrication, plasticity, chemical stability
Application: Widely used in steel, metallurgy, petroleum, chemical industry, machinery, aerospace, atomic energy and other industrial sectors.

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ168F (Recoil)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreÃ?Stroke (mm): 68X54
Displacement(cc): 196
Compression ratio: 22:01
Rated power/ Rated speed (Hp/r/min): 3.0/3000 3.3/3600
Max power/ Max speed (Hp/r/min): 3.3/3000 3.6/3600
Lubricating system: Pressure splashed
Starting system: Recoil starter/
Rotation direction(face to the output axle): Anticlockwise
Fuel type: 0#ã?�-10#ã?�-20# diesel
Fuel tank capacity (L)/(us.gal): 2.5/0.66
Fuel consumption/related rotation speed (g/hp.h/r/min): 315/3000 320/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal): 0.7/0.184
Starting motor capacity (V�kW): 12V   0.8kW
Charging generator capacity (V�A): 12V   3A
Battery capacity (Vã?�Ah): Above 12V 20Ah
Package dimensionL�W�Hmm: 313X380X335
Net weight(kg): 20kg

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ170F (Recoil starter)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreStroke (mm): 7055
Displacement(cc): 211
Compression ratio: 21:01
Rated power/ Rated speed (Hp/r/min): 3.4/3000             3.8/3600
Max power/ Max speed (Hp/r/min): 3.8/3000             4.2/3600
Lubricating system : Pressure splashed
Starting system: Recoil starter
Rotation direction(face to the output axle): Anticlockwise
Fuel type:0#�-10#�-20# diesel
Fuel tank capacity (L)/(us.gal):2.5/0.66
Fuel consumption/related rotation speed:(g/hp.h/r/min) 209/3000            218/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) :0.75/0.20
Starting motor capacity (V�kW): 12V 0.8kW
Charging generator capacity (V�A): 12V 3A
Battery capacity (V�Ah): Above 12V 20Ah
Package dimensionï¼?LWHï¼?mm: 430X370X465
Net weight(kg)¤27

Single-cylinder,ertical,air-cooled,4-stroke,direct injection diesel engines
Model No SJ178F (Recoil starter)
Type Single-cylinder,ertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 78 62
Displacement(cc) 296
Compression ratio 21:01
Rated power/ Rated speed (Hp/r/min) 5.0/3000 5.5/3600
Max power/ Max speed (Hp/r/min) 5.5/3000 6.0/3600
Lubricating system Pressure splashed
Starting system Recoil starter
Rotation direction(face to the output axle) Anticlockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 3.5/0.92
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) 1.1/0.29
Starting motor capacity ( �kW) 12 0.8kW
Charging generator capacity ( �A) 12 3A
Battery capacity ( �Ah) Aboe 12 20Ah
Package dimensionï¼?L W Hï¼?mm 480X450X525
Net weight(kg)¤33

Thru-feed
1)Grinding diameter 5-100mm
2)Grinding length 190mm
Plunge-feed
1)Grinding diameter 5-100mm
2)Grinding length 200m
Grinding wheel specifications P600*200(250)*305mm
Regulating wheel specifications P350*200(300)*203mm
Grinding wheel speed 1100r/min
Regulating wheel speed(stepless) 10-200r/min
Swiveling angle of regulating wheel
1)In vertical plane -2
2)In horizontal plane -1
Regulating wheel min. feed amount 0.001mm
Grinding wheel dresser min. feed amount 0.01mm
Height from centerline of gri.wheel & reg.wheel to workrest 200mm
Cooling Water 100L/min
Total power of machine
1)Grinding wheel motor 22kw
2)Regulating wheel motor 3kw
3) Pump Motor 0.45kw
4)Lubricant Pump Motor 0.09kw
5)Hydraulic Pump Motor 0.75kw
6)Magnetic coolant separator Motor 0.18kw
Power supply 3 Phase,50HZ,380V
Overall dimensions 3200*1785*1800mm
Machine weight About 7500kg
Machining accuracy
1)Roundness 0.001mm
2)Cylindricity 0.0018mm
3)Surface Roughness Ra0.16um