Find Verified Diesel Engine Oils Suppliers, Manufacturers and Wholesalers

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

Custom Liquid filled Solar Inverter Step up Oil-Immersed Transformer for photovoltaic power plants includes hermetically sealed, amorphous alloy, conservator type and on-load tap changer type, which is usually pole mounted or installed in distribution station for daily lighting and factory power whose LV output up to 0.4kV. Our distribution transformer rating is up to 2500kVA, and primary voltage up to 35kV. The corrugated tanks as thermal expansion and contraction component enable the transformer oil completely isolated with the atmosphere. Oil distribution transformer with primary voltage range of 6,10,10.5,11,20,22,24,33, 35,38.5kV can be manufactured according to customer requirements.

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Series JZC waste engine Oil regeneration equipment is specially designed for regenerating the black engine oil and diesel oil. It can effectively remove the wear debris, asphalt, wax quality, impurities, moisture, acid quality, organic acids and inorganic acids from waste engine oil; also, carbon particles, deep oxides and other fine impurities which disperse in oil are all removed out. JZC series can demulsify and improve oil color, making the regenerated oil color closed to new oil color, recover the oil performances. After the regenerating process, the treated oil will be the engine oil and diesel oil, which is suitable for making new diesel oil or lubricating oils.


wooden case

Cold-pressed castor oil in a 50 ml amber roll-on bottle with a rose quartz stone ball, packed in a printed box. For hair, brows and skin. Non-hazardous for transport, MSDS available.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

Engine oil
Nsh ger engine oil regeneration system(used oil purifier, oil treatment, oil recovery, oil processing, oil filtering, oil filtration, oil purification, oil recycling, oil restoration, oil disposal, oil reclamation)
Application
Nsh ger engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of ger
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.

GER series Used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¯s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.

Diesel engine features:
1.Easy and quick start, easy maintenance, low operation cost.
2.Strong Power, the miniaturized fuel injection system/
3.Low fuel consumption, stand up the hard work.
4.High quality spare parts, excellent performance.
5.Process innovation, long service life.
6.Light weight, compact construction.
7.Unique drive system, safe and reliable.

Engine oil regeneration oil purifier
Nsh ger engine oil regeneration system(used oil purifier, oil treatment, oil recovery, oil processing, oil filtering, oil filtration, oil purification, oil recycling, oil restoration, oil disposal, oil reclamation)
Application
Nsh ger engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of ger
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.

GER series used oil recycling machine can recycle kinds of used engine oils including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. It has such main characteristics and advantages:
1.Two main filtering systems can ensure the GER to work continuously by batch.
2.GER machine can install the equipment to remove the bad smell of treated oil, thus it's a machine which is good for the environment protection.
3.GER can install special equipment to treat discharging gas well.
4.GER can purify the mixed used oil, but the output quantity and quality is influenced by the composition and quality of used oil
5.Low investment and high gaining. Comparing with other kind of used oil recycling machine, buyer invests less and get not less gaining. One used oil recycling machine is just equivalent to a small oil mill.

Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Engine oil regeneration system
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.

Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose

Ger series used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¡¥s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Different types

GER used engine oil purifier

Nsh ger used oil purifier machine

Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.
Edges of ger

1. Design according to different customersf+ needs including turnkey project.
2.Purify blended oils.
3.Low operation cost.
4.Low maintenance and replacement expenses.
5.High regeneration rate.
6.Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
7.High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
8.Small size, light weight, low noise.
9. Two main filtering systems in the ger which can ensure the ger works continuously by batch.
10.Environmentally friendly.

Application of nitrocellulose
Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone
Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

Nsh ger used oil regeneration system

Application(oil filtration, oil purification, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, oil filter, oil purifier, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recuperation, oil filtrating, used oil, industrial oil, oil remediation, oil processing)
Nsh ger gas engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.

NSH GER series used oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery f+s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.

Edges of GER
* two main filtering systems ensuring continuous work.
* no acid used during operation.
* stainless steel made filters.
* remove exhaust gas quickly and efficiently.
* heat preservation material keeping high efficient heating.
* turnkey project.
* purify blended oils.
* low operation cost.
* low maintenance and replacement expenses.
* high regeneration rate.
* automatic reverse-washing system improving performance of filters.
* high performance security system.
* small size, light weight, low.

LYE used engine oil regeneration system is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. Also can be treated with regeneration by LYE series machines.

LYE series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil from car, motor, truck, ship, mines, electrical power and so on.

It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly.

After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too, so as to resume the performance of gas or diesel engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas or diesel engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

Features
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.

Our Main Products:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series LYE Engine oil recycling system
Series TYB Portable light Fuel oil purification machine
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series JL Portable oil filtering and oiling machine
Series IIJ Oil Tester (BDV Tester) .

Features:
1.Easy and quick start, easy maintenance, low operation cost.
2.Strong Power, the miniaturized fuel injection system.
3.Low fuel consumption, stand up the hard work.
4.High quality spare parts, excellent performance.
5.Process innovation, long service life.
6.Light weight, compact construction.
7.Unique drive system, safe and reliable.

Application

NSH GER used oil regeneration system is particularly suitable to filtering used
internal-combustion engine oil including diesel engine oil, gasoline engine oil
and used hydraulic oil, other used machinery's lubrication oil. GER Recycling
series are able to effectively remove colloid, oxid, acid, pitch, particles,
impurities, water, gas in the used oil. Specially, GER can restore the color of
used oil and remove the scent rapidly.

Edges of GER

1.Design according to different customers’ needs including Turnkey Project.
2.Purify blended oils.
3.Low operation cost.
4.Low maintenance and replacement expenses.
5.High regeneration rate.
6.Automatic reverse washing system will extend the lifetime and improve the performance
of the filters.
7.High performance security system including pressure protection device and automatic
temperature controller makes purifier operated safely.
8.Small size, light weight, low noise.
9. Two main filtering systems in the GER which can ensure the GER works continuously
by batch.
10.Environmentally friendly.

Technical Specifications

Item Unit GER-1 GER-2 GER-3 GER-4 GER-5 GER Product Line
Treatment Capacity L/8 -10hrs 2000 4000 6000 8000 10000 Above 10000
Regeneration Rate % 70-90%
Working Pressure MPa -0.095-0.4
Temperature 60-200
Working Noise dB(A) =90
Heating Power KW
Inlet/Outlet
Pipe Diameter Mm F42
Weight kg 6000 6700 7200 8000 8500

DIESEL GENERATOR 2.5KW/3.4HP AIR-COOLED SINGLE CYLINDER SMALL DIESEL ENGINE FOR SALE



Condition: New
Usage: generator,boat,vehicle,pump,welding, generator,boat,vehicle,welding,pump
Fuel: Diesel
Stroke: 4 Stroke
Cylinder: Single Cylinder
Cold Style: Air-cooled
Start: Electric Start
Place of Origin: Chongqing, China (Mainland)
Brand Name: Yangke
Model Number: YK170F/FE
Dimension(L*W*H): 335*380*415mm
Weight: 27~31kg
Certification: CE,ISO9001:2008,TS16949
Warranty: 1 Year/1000 hours After-sales
Service Provided: Overseas third-party support available
Bore&Stroke: 70x55mm
Starting System: F:manual FE:electric
Advantages: high quality,low noise,low consumption,widely used
Fuel Type: Diesel:0#(summer),-10#(winter)
Oil Brand: SAE10W30(CD grade or above)
Net Weight: 27~31kg
Package Dimension: 335x380x415
Packaging & Delivery

Packaging Details: bubble film,naked packing with plastic wrap,wooden case or as demands.
Delivery Detail: within 7 days after deposit confirmed

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ168F (Recoil)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreÃ?Stroke (mm): 68X54
Displacement(cc): 196
Compression ratio: 22:01
Rated power/ Rated speed (Hp/r/min): 3.0/3000 3.3/3600
Max power/ Max speed (Hp/r/min): 3.3/3000 3.6/3600
Lubricating system: Pressure splashed
Starting system: Recoil starter/
Rotation direction(face to the output axle): Anticlockwise
Fuel type: 0#ã?�-10#ã?�-20# diesel
Fuel tank capacity (L)/(us.gal): 2.5/0.66
Fuel consumption/related rotation speed (g/hp.h/r/min): 315/3000 320/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal): 0.7/0.184
Starting motor capacity (V�kW): 12V   0.8kW
Charging generator capacity (V�A): 12V   3A
Battery capacity (Vã?�Ah): Above 12V 20Ah
Package dimensionL�W�Hmm: 313X380X335
Net weight(kg): 20kg

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ170F (Recoil starter)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreStroke (mm): 7055
Displacement(cc): 211
Compression ratio: 21:01
Rated power/ Rated speed (Hp/r/min): 3.4/3000             3.8/3600
Max power/ Max speed (Hp/r/min): 3.8/3000             4.2/3600
Lubricating system : Pressure splashed
Starting system: Recoil starter
Rotation direction(face to the output axle): Anticlockwise
Fuel type:0#�-10#�-20# diesel
Fuel tank capacity (L)/(us.gal):2.5/0.66
Fuel consumption/related rotation speed:(g/hp.h/r/min) 209/3000            218/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) :0.75/0.20
Starting motor capacity (V�kW): 12V 0.8kW
Charging generator capacity (V�A): 12V 3A
Battery capacity (V�Ah): Above 12V 20Ah
Package dimensionï¼?LWHï¼?mm: 430X370X465
Net weight(kg)¤27

Single-cylinder,ertical,air-cooled,4-stroke,direct injection diesel engines
Model No SJ178F (Recoil starter)
Type Single-cylinder,ertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 78 62
Displacement(cc) 296
Compression ratio 21:01
Rated power/ Rated speed (Hp/r/min) 5.0/3000 5.5/3600
Max power/ Max speed (Hp/r/min) 5.5/3000 6.0/3600
Lubricating system Pressure splashed
Starting system Recoil starter
Rotation direction(face to the output axle) Anticlockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 3.5/0.92
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) 1.1/0.29
Starting motor capacity ( �kW) 12 0.8kW
Charging generator capacity ( �A) 12 3A
Battery capacity ( �Ah) Aboe 12 20Ah
Package dimensionï¼?L W Hï¼?mm 480X450X525
Net weight(kg)¤33

Model No SJ186FE (Electric starter)
Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 86 70
Displacement(cc) 406
Compression ratio 19:01
Rated power/ Rated speed (Hp/r/min) 7.7/3000 8.60/3600
Max power/ Max speed (Hp/r/min) 8.6/3000 10.0/3600
Lubricating system Pressure splashed
Starting system Electric starter
Rotation direction(face to the output axle) Clockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 5.5/1.45
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40,40CC
Lube oil capacity (L)/(us.gal) 1.65/0.44
Starting motor capacity (V �kW) 12V 0.8kW
Charging generator capacity (V �A) 12V 3A
Battery capacity (V �Ah) Above 12V 20Ah
Package dimensionL W Hmm 525X470X565
Net weight(kg)¤51.5

Model No SJ188FE (Electric starter+Battery)
Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 88X86
Displacement(cc) 523
Compression ratio 19:01
Rated power/ Rated speed (Hp/r/min) 8.9/3000 10.0/3600
Max power/ Max speed (Hp/r/min) 10.0/3000 12.0/3600
Lubricating system Pressure splashed
Starting system Electric starter
Rotation direction(face to the output axle) Clockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 5.5/1.45
Fuel consumption/related rotation speed (g/hp.h/r/min) 272/3000 280/3600
Lube oil type CD grade or SAE 10W-30, 15W-40,40CC
Lube oil capacity (L)/(us.gal) 1.65/0.44
Starting motor capacity (V �kW) 12V 0.8kW
Charging generator capacity (V �A) 12V 3A
Battery capacity (V �Ah) Above 12V 20Ah
Package dimension L W H mm 525X470X585
Net weight(kg) 53

We supply spare parts for diesel engine
Replacement parts for perkins, cumminse

waste engine oil recycling plant to diesel fuel can be used in black engine oil, crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of raw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.
Systems of waste engine oil recycling plant to diesel fuel
Reaction tank: raw material will be pumped into this tank from the primary filter .
Heating system: by burning fuel oil ,gas or coal to make the oil temperature up to setting value. This system equips with insulation system.
Catalytic system: raw material reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition.
Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.
Temperature control system: ensure that raw material transform into gasoline and diesel oil, raw material drying by distillation, can stop heating timely.
Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.
3.Index of oil after treatment:
Yield
diesel oil : 86-88%,
gasoline oil: 5-6%,
oil residue: 6-8%.
Low-speed diesel engine can be used directly.

Engine oil purifier

LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.


wooden case

This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

1. High precision stainless steel net is used as purifying material which is corrosion-proof, high temperature resistant and has a good mechanical strength with longer life time, capable of removing oils' tiny impurity in more depth.
2. High accurate and effective removal of water content in oil, as well as rest of harmful gas.
3. Capable of recovering the clarity of engine oil back to the clarity of new oil.
4. This purifier adopts both manual and auto disposal of residue, which operates fast, stably, reliably and safely.
5. Strong condensation technology is applied to the drawn out mixed gas which increases effective output and extend life time of vacuum pump.
6. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met.
7. Imported parts are used for all electric system which ensures operation of the equipment with high performance.
Item unit zly
Flow rate kg/d 8000
Working pressure mpa -0.095~0.4
Temp. Control range centi 80 centigrade~180centi
Working noise db(a) f_80
Heating power kw 72 kw
Inlet/outlet pipe diameter mm 42
Overall size mm 3850*2250*2320
3500*1750*1850
3500*1750*1850

Application:
LYE series engine oil purifier is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.

Features:
1. Fine precision filtering material, with excellent mechanical strength and long service life, which is anti-erosion and anti-hi-temperature, with high performance of removing fine particles in the contaminated oil.
2. Completely removing water content and harmful gases from the contaminated oil.
3. Manually/automatically removing residual impurities from the machine, which is easy to operate and on the safe side.
4. The mixture of gases drawn out via vacuum system is condensed and dewatered by forced air, which improves the effective output power of the machine and prolongs the service life of vacuum pump.
5. After treating, the oil color looks like the new.

Advantage:
This machine can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerate the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

Place of Origin: Chongqing, China (Mainland)
Brand Name: YANGKE
Model Number: SC200GF-9D
Output Type: AC Three Phase
Speed: 1500RPM
Frequency: 50HZ
Rated Power: 200KW
Rated Voltage: 400/230V
Rated Current: 361
Bore&Stroke: 114x144mm
Type of governor: Electronic
Usage: construction,hotel,school,mine,etc
Certification: CE,ISO9001,SGS,GOST,TUV,BV
Advantages: small size,large power reserve,high reliability
Options: silent,container,dust proof
Color: as your request
Warranty: 1 year or 1000 working hours
Engine Net Weight: 660kg Package Dimension: 2460x1000x1540mm
Packaging & Delivery

Packaging Details: bubble film or naked packing with plastic wrap.
Delivery Detail: within 7 days after deposit confirmed

Oil purifier
++ 1·¼it is a physiochemical application to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated. The colloid, bitumen and other compound in oil are also removed while harmful gas and the filtration and the vacuum dewatering function of waste gas cleaner remove water content. Thus, the oil is cleaned and the effective constituent of oil is retained. ++ 2·¼high precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime. It is easy-to-use, and utilizes the economical pressure filter as filter medium. ++ 3·¼novel structure, good layout and is deemed as a fªmini refineryfª. ++ 4·¼very straight and evident effect, can also serve for multiple purposes. ++ 5·¼can be tailored to meet the needs of an individual customer.

By the seller's option

Oil purifier
It is a physiochemical application to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated. The colloid, bitumen and other compound in oil are also removed while harmful gas and the filtration and the vacuum dewatering function of waste gas cleaner remove water content. Thus, the oil is cleaned and the effective constituent of oil is retained.
High precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime. It is easy-to-use, and utilizes the economical pressure filter as filter medium.
3·¼novel structure, good layout and is deemed as a fªmini refineryfª.
4·¼very straight and evident effect, can also serve for multiple purposes.
5·¼can be tailored to meet the needs of an individual customer.

By the seller's option

Lye series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

V. Features

1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating ac contract and prolong the service life of ac contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vaccum level, ultra-pressure etc.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

LYE series is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.


Wooden case

Engine oil regeneration system is mainly for regenerating the waste engine oil.

Lye series oil refinery machine is special for treating engine/car/ship/black oil, you could get clean and refreshed engine oil after treated by this machine.


If this is not your needing type, follow is our catalogue for you to choose:
Series zy single-stage vacuum transformer oil purifier
Series zyd double high vacuum transformer oil purifier
Series zyb multiply-function insulating oil treatment machine
Series ty turbine oil purification apparatus
Series tya lubricating oil/ hydraulic oil purification unit
Series lye engine oil recycling machine
Series bod black dirty oil regeneration equipment
Series dod diesel oil regeneration equipment
Series tyb portable light fuel oil purification machine
Series ly plate pressure oil purifier
Series tyd vacuum dehydrator
Series jl portable oil filtering and oiling machine
Series iij oil tester (bdv tester)

NSH GER Used Oil Regeneration System is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryí»s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.

Bod series oil refinery machine could ture black and waste engine/car/diesel/motor/lubricating/crude/heavy fuel/rubber oil into base oil.
This machine could help to save your energy and bring profite for you in long term.
For more details, do not hesitate to contact me, your reply will be highly appreciated!

Lye regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Lye can effectively remove colloid, oxide, acid, pitch, particles, impurities, water, gas in the oil. Specially, lye can restore the color of used internal-combustion engine oil and remove the scent rapidly.

Advantages of lye: design according to different customers needs, purify blended oils, low operation cost, low maintenance and replacement expenses, high regeneration rate, high performance security system including pressure protection device and automatic temperature controller makes purifier operated safely, small size, light weight and low noise.

Characteristics: the vacuum oil filter researched and developed, can treat low and high viscosity lubricating oil in various kinds. It needs no special conditions on environment except electricity and waste oil. The waste oil can be treated everywhere and whenever. The operation is simple and easy. The maintenance for the equipment is simple and easy, too. And the cost is very little.



Packed with wooden case