Optical switch have a wide range of applications in fiber
communication systems, and their implementation technologies
are diverse, including: mechanical optical switch, thermo-optic
switch, acousto-optic switch, electro-optic switch,
magneto-optical switch, and MEMS optical switch, etc. The
MEMS optical switch is a high-tech product based on
MEMS(Micro-Electro-Mechanical System) technology. It has
the characteristics of small size, low power consumption, and
good expandability. It is widely used in optical network
scenarios such as ROADM, iODF and fiber sensing etc.
HDMI to YPbPr (color difference) / VGA converter HV, can convert HDMI signal into YPbPr (color difference) + VGA + L / R left and right channel output, so that it can be used in the older generation of display devices
Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
2.Technical Parameters
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter
Number of Network Ports1 channel
Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter
Transmission Rateself-adaptive 10/100/1000M
Protocol supportedIEEE802.3/IEEE802.3U etc.
Fiber TypeSingle Fiber
Optic modeSingle Mode
Transmission modehalf / full duplex
Overall Power
1.Introduction
10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users needs, achieving high-speed remote interconnection for up to 120 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
2.Features
In accordance with Ethernet standards IEEE802.3 10Base-T, IEEE802.3u 100Base-T and 100Base-FX
Supported Ports: SC for optical fiber; RJ45 for twisted pair
Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
Auto MDI/MDIX supported without need of cable selection
Up to 6 LEDs for status indication of optical power port and UTP port
External and built-in DC power supplies provided 128 K's data buffer RAM
Support for low-delay time pure data transmission and full/half-duplex flow control.
Built-in watch-dog timer to monitor any error in internal data exchange
424 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
Dxl series optic fusion unit body, maximum make the optic fiber forming, connection and wiring to be high density while offer the best protection for the cable and can be independence fusion connection unit which install in 19 inch standard stander.
Feature:
Modularize design, frontal operation.
Integrate fusion and wiring, maximum high density.
Can install in 19 sinch standard stander.
Suitable for ribbon and non-ribbon cable.
Can install many kinds of adapter, such as fc, sc, st and lc, etc.
The adapter and equipment use 30 degree card connecting installment, which ensure the jumping wire's curvature radius and can avoid the laser to burn eyes.
Easy operation, complete protection.
The optic fiber and pigtailed all have above 2m saving space.
Function target:
Environment temperature: -40~ 60
Atmospheric pressure: 70kpa~106kpa
Rh: <95% (40 degree)
The inserted exhaustion of optic connector: <0. 3db
The echo exhaustion of optic connector pc type: >40db; upc type: >50db; apc type: >60db
The push-pull durability lifetime of optic connector is greater than 1000 times.
conditionï¼?new
warranty: 1 year
Good quality with long life span
WHY you choose us:
Our company has many products in stock,which are immediately available.If you purchase one more parts from us,we can make a discount to you.
Condition New
warranty: 1 year
Good quality with long life span
WHY you choose us:
Our company has many products in stock,which are immediately available.If you purchase one more parts from us,we can make a discount to you.
Flyin optronics’ 1x2 mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
All flyin optronics’ 1x2 mechanical optical switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for optical network, protection, transmitter and receiver protection, network test system and instrumentations.
Features
Unmatched low cost
Low insertion loss
High channel isolation
High stability, high reliability
Epoxy-free on optical path
Latching and non-latching
Applications
Optical network
Protection/restoration
Optical singnal routing
Configurable optical add/drop
Transmitter and receiver protection
Network test system
Description
Hdmi and vga interface could be found on most tv, monitors, and displays.
This mini displayport adapter enables you to extend your mac system by one hdmi or vga interface.
It contains 2 chipsets, and supports both digital and analog signal.
By connecting an additional monitor, you can also mirror or extend the display of your mac.
Specification
1. Connector: mini displayport 20 pin male > hdmi / vga female
2. Mini displayport 1.1a standard
3. High speed hdmi
4. Resolution up to 1920 x 1200 and hdtv up to 1080p
Description
Hdmi and vga interface could be found on most tv, monitors, and displays.
This mini displayport adapter enables you to extend your mac system by one hdmi or vga interface.
It contains 2 chipsets, and supports both digital and analog signal.
By connecting an additional monitor, you can also mirror or extend the display of your mac.
Specification
1. Connector: mini displayport 20 pin male > hdmi / vga female
2. Mini displayport 1.1a standard
3. High speed hdmi
4. Resolution up to 1920 x 1200 and hdtv up to 1080p
Description
Just with this cable which could connectting your new notebook, laptop, hd dvd, hd dv without vga interface to projector, display, lcd, tv & monitor in old model with vga interface for big screen viewing directly.
When the computer could not offer enough power, then you could connect a micro usb cable for additional power.
It could support full hd 1080p.
Features:
> > 8 channel 4~20ma signal acquisition, channel to channel is isolated
> > testing accuracy> 0.05%
> > rs485/232 output, can programme the accuracy of module
> > input/output/power supply three-port isolation: 3000vdc
> > wide power supply: 8~50vdc
> > high reliability, programming convenience, easy to install.
> > users can set module address, baud rate.
> > support modbus rtu communication protocal
Applications
> > temperature signal testing/monitoring/cintrol
> > rs232/485 industrial automation control system
> > industial field signal isolation
> > process monitoring & control
> > test sensors signal
> > laboratory data acquisition
> > medical machine monitoring
> > 4~20ma signal acquisition
L-signal measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set compatible with the adam modules, the baud rate is set by the user, with other manufacturers control module hanging in the same rs-485 bus, to facilitate host programming.
Iso ad series of products are based on single chip of intelligent monitoring and control systems, all the user sets such as the calibration value, address, baud rate, data format, checksum status and other configuration information is stored in nonvolatile memory eeprom inside.
Isoda series of products according to industry standard design, manufacture, signal output / communication interface isolation, can withstand 3000vdc isolation voltage, anti-interference ability, high reliability. Operating temperature range: - 45 ~ +80.
Characteristic:
Efficiency grade: 0.1/0.2/0.5
International standard signal input: 0-5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma
Output internal signal with high load capability: 5v/0-10v/1-5v, 0-10ma/0-20ma/4-20ma and so on
24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals.
Communication software:
Communication interface: 1 standard rs485 interface or 2 standard rs232 interface
Communication agreement: standard ascii, modbus, can make network communicate
With plc, rtu or watch software.
Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit.
Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\
38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms.
Anti jamming:
Set checksum according to need. Its inside contains momentary bate diode, can
Restrain surge impulse, protect modules.
Communication interface
485: output is rs-485 interface
232: output is rs-232 interface
232/485: output is rs-232orrs-485interface, rs232/485 switchover freely
Measurement, and industrial-site signal isolation and long-term transmission and so on.
Products include power supply isolation, signal isolation, linearization, a/d conversion and rs-485 serial communication circuit module. Each serial port can connect maximum 256 pcs of isoad series modules, means of communication using character communication protocol or modbus rtu communication protocol. Its instruction set
Model selection
Isoad16 u(a) -
485: output is rs-485 interface
232: output is rs-232 interface
Model Vl-9404
Product name 4 into 4 vga + audio matrix
Pc interfaces 4
Pc interface Vga hddb 15pin, 3.5 audio interface
Output interfaces 4
Remote control effective range (m) 10
1, host a
2, a power line
3, a serial control cable
4, a remote control
5, a manual
6, warranty card
7, a certificate
424 Converters Switches Suppliers
Short on time? Let Converters Switches sellers contact you.
