With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km).
Details about one modle of atop's sfp transceiver here.
Product features
Upto 1.25gb/s duplex data links
Hot-pluggable sfp footprint
1310nm fabry-perot laser transmitter
Duplex lc connector
Rohs compliant and lead free
Upto 20 km on 9/125
Metal enclosure for lower emi
Single 3.3v power supply
Low power dissipation <600mw
Commercial operating temperature range: 0 centigrade to 70 centigrade
Ddm is also available
Cwdm is also available
General
Atop's ap-s31121-3cxl20 small form factor pluggable (sfp) transceivers are compatible with the small form factor pluggable multi-sourcing agreement (msa). They simultaneously comply with gigabit ethernet as specified in ieee std 802.3 and 1x fibre channel as defined in fc-pi-2 rev. 10.0 .They are rohs compliant and lead-free.
HTFuture’s Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser (or DFB laser) and the PIN photo-detector.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
Applications
1, Switch to Switch Interface
2, Fast Ethernet
3, Switched Backplane Applications
4, Router/Server Interface
5, Other Optical Links
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-LW/LR
- 1310nm DFB transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-SW/SR
- 850nm VCSEL transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
- Inter Rack Connection
1.25G SFP optical transceiver module, support 1.25Gb/s and up to 120 km transmission, including: SFP SR, SFP LR, SFP ER, SFP+ ZR, etc.
It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on.
Data rate:10G
Wavelength:1550nm
Distance:80KM
Interface:LC
Fiber:SM
Place of origin:Made in China
Port:Shenzhen
Working temperature: Commercial:0°C to +70°C;Industrial:-40°C to +85°C
Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 296038504500, HUAWEI, the pole into, Dlink, ZTE, HP, juniper and other equipment.
Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle.
Function:Photoelectric conversion module
Scope of application: switch, Ethernet, data center, SDH, SONET, ATM
Data rate:155m
Wavelength:1310nm
Distance:20km
Interface:lc
Fiber:sm
Ddm:yes
Place of origin:made in china
Port:shenzhen
Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c
Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment.
Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle.
Function:photoelectric conversion module
Scope of application: switch, ethernet, data center, sdh, sonet, atm
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers.
10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks.
Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors.
Features
- Supports Links up to 30m using Cat 6a/7 Cable
- Compliant with IEEE 802.3az
- Compliant with SFF-8431 and SFF-8432 MSA
- Low Power Consumption (2.5W MAX @ 30m)
- Auto-negotiates with other 10GBase-T PHYs
- I2C 2-Wire Interface for Serial ID and PHY Register Access
- Auto-sense MDI/MDIX
- RoHS Compliant
- Operating temperature range: 0 C to 70 C
