Ftth 10/100/1000M Media Converter

10/100/1000M Media converter

1550nm SM SC 40KM with external power supply

Features:

Supporting : Full duplex and half duplex transmission and capable of automatic negotiation.
efficient built-in switching core ,to implement flow control and reduce broadcast packets.
Supporting : The transmission of extra-long packets over VLAN.
Supporting : The selection of multiple types of fiber ports such as dual-fiber multi-mode.
dual-fiber single mode and single fiber single mode, to satisfy the extended requirements of users.

Parameter:

Parameters Specifications
Access mode 10/100/1000Mbps Gigabit Ethernet
Standard IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber multi-mode: 220m (fiber size: 62.5/125¦m)/550m(fiber size: 50/125¦m)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km
Single-fiber single-mode: 10/20/40/60/80Km
Category-5 twisted pairs: 100m
Port One RJ45 port: Connected to STP/UTP category-5 twisted pairs
One fiber port: dual-fiber multi-mode SC (fiber size: 50,62.5/125¦m) Dual-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Single-fiber single-mode SC/FC fiber port (fiber size: 9/125¦m)
Conversion mode Medium conversion
Delay <10¦s
Bit error rate <1/1000000000
MTBF 100,000 hours
LED POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action)
Power AC220 0.5A/DC-48 (builtin)
Power consumption internal power supply or external power supply: AC100 265V / DC5V
Operating temperature -10~55
Operating humidity 5%~90%
Storage temperature -40~70
Storage humidity 5%~90% (non-condensing)
Dimensions 26mm(H)*70mm(W)*98mm(D) (height*width*depth) (builtin power)
120mm(H)*24mm(W)*78mm(D) (depth*width*height) (module card)


Ordering Choice:

Model
Working wavelength
Fiber
Electrical port
Fiber model
Tx power(dBm)
Rx power(dBm)
Transmission

distance

WN-MC-210 sm-2S
1310nm
SC
RJ-45
Dual-fibe Multi-mode
-22 to -12
= -30
2km

WN-MC-210 SW-25S
1310nm FP
SC/FC/ST
RJ-45
Single modeDual -fiber
-15 to -8
= -37
25km

WN-MC-210 - SW-40S
1310nm FP
SC/FC/ST
RJ-45
Single mode Dual-fiber
-8 to -3
= -37
40km

WN-MC-210

SW-60S
1310nm FP
SC/FC/ST
RJ-45
Single mode Dual-fiber
-3 to 0
= -37
60km

WN-MC-210 SW-80S
1550nm DFB
SC/FC/ST
RJ-45
Single modeDual-fiber
-8 to -3
= -40
80km

WN-MC-210 SW-100S
1550nm DFB
SC/FC/ST
RJ-45
Single mode Dual-fiber
-3 to 0
= -40
100km

WN-MC-210 SW-120S
1550nm DFB
SC/FC/ST
RJ-45
Single mode Dual -fiber
0 to 3
= -40
120km

WN-MC-210 SB-25A(B)M
1310/1550nm FP
SC
RJ-45
Single mode single-fiber
-13 to -8
= -36
25km

WN-MC-210 SB-40A(B)M
1310/1550nm FP
SC
RJ-45
Single mode single-fiber
-8 to -3
= -36
40km

WN-MC-210 SB-40A(B)M
1310/1550nm DFB
SC
RJ-45
Single mode Single fiber
-10 to -5
= -36
40km

WN-MC-210 SB-60A(B)M
1310/1550nm DFB
SC
RJ-45
Single mode Single-fiber
-5 to -3
-36
60km


24x13x15cm ; 0.5KG/pc; 40pcs in 54x37x26cm cartons.

SFP Slot 10/100/1000M Optic Media Converter
pls contact us for more details
info[at]hongkien[dot]com
10/100/1000Base-TX to 1000Base-FX Converter
Standards: IEEE802.3 IEEE802.3U, 10/100/1000Base-TX, 1000Base-FX
Interface: 1x RJ-45 connector 1x SFP Slot
Flow Control: TEEE802.3x Flow control for full duplex mode.
Back-pressure flow control for half duplex model


call

Short Description:
10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup usersâ?? needs, achieving high-speed remote interconnection for up to 100 kmâ??s relay-free computer data network.We can offer dual fiber multi-mode as well single fiber single-mode.

Application :

With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.

Divanti Group generates large volume of iCORE and Core 2 Duo Laptops monthly. Each lot is separated by either iCORE Laptops or Dual Core/Core 2 Duo Laptops. Our approximate order ranges from 100-300 units on average. If you are interested in purchasing laptops in bulk, feel free to send me your email address and I can send over current stock lists that is available.

Thank you.

10/100 MBPS managed media converter

Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX cable selection Fast Ethernet Media Converter with intelligent network management that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX cable to 100Base-FX fiber optic cable. It enables network managers and network operators quickly isolate problems without visiting multiple wiring closets, avoiding expensive downtime. With its SNMP manager, user can monitor and configure the Copper Port and Optical Port of center chassis and remote standalone easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.

Hardware Function

Support 10Base-T, 100Base-TX, 100Base-FX
Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x standards
Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
High-performance auto-negotiation chips make sure the data transfer with higher
Security, stability and without block.
Up to 1916 bytes package forwarded
Support half/full duplex mode Auto-negotiate
Low power consumption, low heat generation and excellent compatibility
10Watt professional communication power supply module inside the standalone.
Chassis supports double redundant power supply modules and each power supply module
Supports up to 100 Watt power output for the security and stability
Support hot-swap for all the modules, but not including management module
Single-strand/dual-strand optical module selectable, FC/SC/ST optical port slectable and standalone/16-slot chassis selectable.




Device Size
Standalone: 132mm (width)*36mm (depth)*122mm (height)
19-inch Chassis: 440mm (width)*125mm(depth)*250mm(height)

Supports SNMP management (only for management device) MDI-MDIX Auto-crossover supported
Plug-and-Play installation
Support Jumbo frame (64-9216 Byte)
Support Voltage Monitor
Support full/half duplex auto-negotiation
Provides one RJ-45 twisted pair 1000Mbps Ethernet port and one 1000BASE-Fx port
Comply with IEEE802.3z 1000Base-SX/LX &IEEE 802.3ab 1000Base-T
LED indication: 1000M,FX, POW, TXD, FRX, FDX/HDX

Description:
10-100-1000M designed to fit the emerging deployment needs of optical fiber network. This stand-alone converter allows you to connect Gigabit twisted-pair network to optical-fiber network easily and cost effectively to a maximum distance 120KM.
10-100-1000M is fully compliant with IEEE 802.3z & 802.3ab standards. The Installation & operation procedures of the -10-100-1000M are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel.

Export standard packaging

10/100/1000m fiber media converters

Main features

Auto negotiation function allows utp ports to auto select 10/100/1000m and full duplex or half duplex.
The utp port supports the connection of mdi/mdi-x auto crossover.
Multimode fiber: the max distance up to 224m/ 550m
Singlemode fiber: the max distance up to 100km
Supporting the max 1536 byte ethernet packet
Supporting flow control
Adopting internal power supply

Technical specifications

Operating standards: ieee802.3z/ab, 1000base-t and 1000base-sx/lx
Mac address table: 4k
Data buffer: 256k
Connector: utp: rj-45, 10/100/1000mbps; fiber: sc, 1000mbps
Cable :
Utp cable: cat 5e or cat 6 (the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125ª8m (the max distance up to 550/224m)
Singlemode : 8.3/125, 8.7/125, 9/125ª8m (the max distance up to 100km)
Flow control
Full duplex: ieee802.3x
Half duplex: back pressure.
Power: ac 220v(170-260v) 50hz; dc 5v¼2a
Ambient temperature¦0 ½ +50µ
Storage temperature¦-20 ½ +70µ
Humidity¦5% ½ 90%
Dimensions ¦40 (high) x 110 (width) x 140 (length) mm

Media Converter, 10/100M 1310nm SM 5km
Fiber optic media converter

Skype:wirenettehnology

Features :

Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.

Surporting : The transmission of extra-long packes over VLAN

Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users.



Technical specifications

Parameter
Specifications

Access mode
10/100Mbps

Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree

Wavelength
850nm/1310nm/1550nm

Transmission distance
Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km

Category-5 twisted pair: 100m

Port
One RJ45 connector, connected to STP/UTP category-5 twisted pair

One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125¦m)

Single mode - SC/FC fiber port (fiber size: 9/125¦m)

Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125¦m)

Conversion mode
Medium conversion, storing and forwarding

MAC address table
I K

Buffer space
1Mbit

Flow control
Full duplex state: flow control; half duplex state: back pressure mode

Delay
9.6us

Bit error rate
<1/1000000000

MTBF
100,000 hours

LED
Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT )

FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)

TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action)

TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)

Power
AC220 0.5A/PC-48(builtin)

Power consumption
5W

Operating temperature
-10~55¦C

Operating humidity
5%~90%

Storage temperature
-40~70¦C

Storage humidity
5%~90% (non-condensing)

Dimensions
140mm * 111 * 30mm(in) 95 + 70 + 26mm(out)








140mm x111 x 30mm(in) 95 x 70 x26mm(out) , 0.5KG/pc