Find Verified Marine Engines Suppliers, Manufacturers and Wholesalers

PP breath cap with seal. color by your request.

Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids.

Application fields:
Wirewound Resistors
bimetal contact
Electrical and Electronic Applications
Marine Engineering
Chemical and Hydrocarbon Processing Equipment
petrol and fresh water tanks
Distiller
degas heater
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings and fasteners
Industrial heat exchanger
Chlorinated solvents
Crude distillation tower

We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar

UNS:N04401

inconel625 is an alloy grade with a density of 8.4 g/cm3 and a melting point of 1290-1350C. It has excellent corrosion resistance to inorganic acids and has excellent corrosion resistance to various corrosive media in oxidizing and reducing environments.
Alloy 625 exhibits excellent corrosion resistance in many media. Excellent resistance to pitting, crevice, intergranular and erosion in chloride media
Inconel 625 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in fields such as aerospace, energy, chemical industry, and marine engineering. The following are the common national standard designations for Inconel 625:
American standard designations: UNS N06625, ASTM B446, ASTM B564, ASTM B443, ASTM B446, AMS 5599, AMS 5666, AMS 5837, ASME SB446, ASME SB443, ASME SB446, ASME SB564. European standard designations: EN 2.4856, EN 10216-5, EN 10250-4, EN 10253-4, EN 10263-4, EN 10272, EN 10297-2, EN 10302, EN 10312, EN 10314, EN 12266-1, EN 12560-6, EN 13480-3, EN 13480-5, EN 13544-2, EN 1592-4. German standard designations: DIN NiCr22Mo9Nb, DIN 2.4856, DIN 17744, DIN 17752, DIN 17754, DIN 17751. Japanese standard designations: JIS NCF625, JIS G4902, JIS G4941, JIS G5502, JIS G5122. Chinese standard designations: GB/T UNS N06625, GB/T 14992, GB/T 15001, GB/T 15003, GB/T 15004, GB/T 21833

We can provide the following the form:Inconel625 alloy coil; Inconel625 alloy strip;Inconel625 alloy plate; Inconel625 alloy sheets; Inconel625 alloy tube; Inconel625 alloy pipe;
Inconel625 alloy flat; Inconel625 alloy bar

GB:GH3625;JIS:NAS625;UNS:N06625;DIN:NiCr22Mo9Nb;W.Nr:2.4856

Inconel 718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength at 700 C, good toughness and corrosion resistance in high and low temperature environments. The delivery condition can be solution treated or precipitation hardened.
No matter in high temperature or low temperature environment, Inconel718 alloy has excellent resistance to stress corrosion cracking and pitting corrosion. Inconel718 alloy is especially excellent in oxidation resistance at high temperature.
Inconel 718 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in aerospace, energy, chemical, and marine engineering fields. The following are the common national standard designations for Inconel 718:
US standard designation: UNS N07718, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5596, ASTM B637, ASTM B670, ASTM B906, ASTM B983, ASTM B655, ASTM B751, ASME SB637, ASME SB670, GE B50TF15, GE B50TF14, GE B50TF14E, GE B50A714, SEW 555. European standard designation: EN 2.4668, EN 10216-5, EN 10250-4, EN 10263-4, EN 10269, EN 10302, EN 10305-1, EN 10308, EN 10312, EN 10314, EN 12266-1, EN 13480-5, EN 13544-2, EN 14456. German standard designation: DIN NiCr19NbMo, DIN 2.4668, DIN 17742, DIN 17754. French standard designation: AFNOR NC19FeNb, AFNOR NC 19 Fe Nb. British standard designation: BS HR 51, BS HR 52, BS HR 601, BS HR 602, BS HR 605, BS HR 506. Russian standard designation: �?�?�¡�¢ �­�?678, �?�?�¡�¢ 5632-72, �?�?�¡�¢ 9940-81, �?�?�¡�¢ 14955-77, �?�?�¡�¢ 22897-86.
Note: Standard designations may vary depending on the different standard organizations or countries.

We can provide the following the form:Inconel718 alloy coil; Inconel718 alloy strip;Inconel718 alloy plate; Inconel718 alloy sheets; Inconel718 alloy tube; Inconel718 alloy pipe;
Inconel718 alloy flat; Inconel718 alloy bar

BS:HR 51;DIN:NiCr19NbMo;UNS:N07718;W.Nr:2.4668

1. Steam turbine
2. Liquid fuel rockets
3. Low temperature engineering
4. Acid environment
5. Nuclear engineering.

Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions.
Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering.
The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur.
In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures.
Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength.
Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required.
The following are the execution standards of Incoloy alloy 890 in various countries:
US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890
Europe: EN 10095
Germany: DIN 17742, DIN 17750, DIN 17754
UK: BS 3076
Japan: JIS G4902
China: GB/T 14992

We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar

GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539

Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators.
Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves.
High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines.
Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.

Incoloy alloy 925 is a precipitation-hardenable nickel-iron-chromium alloy that contains additions of molybdenum, copper, titanium, and aluminum. The alloy has excellent mechanical properties at both ambient and elevated temperatures, making it suitable for use in a wide range of applications, including sour gas and oil production, aerospace, chemical processing, and marine engineering.
Incoloy alloy 925 is known for its high strength, which is achieved through a combination of solid solution strengthening and precipitation hardening. It also exhibits excellent resistance to corrosion and oxidation in a variety of environments, including those containing sulfides and chlorides.
The addition of molybdenum and copper to the alloy improves its resistance to pitting and crevice corrosion, while the titanium and aluminum additions enhance its resistance to intergranular attack. The combination of these elements makes Incoloy alloy 925 highly resistant to stress corrosion cracking and hydrogen embrittlement.
The alloy is typically supplied in the solution annealed condition, and can be easily fabricated using common techniques such as welding, brazing, and machining. After fabrication, the alloy can be precipitation hardened to achieve its maximum strength.
Incoloy alloy 925 is available in a range of forms, including round bars, flat bars, forgings, and wire. It is also available in various sizes and dimensions to meet the specific needs of different applications.
Overall, Incoloy alloy 925 is a versatile and high-performance alloy that offers excellent strength, corrosion resistance, and durability in demanding applications.
The international standard designations for Incoloy alloy 925 include UNS N09925 and W.Nr. 2.4858. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 925 in different countries:
United States: AMS 5660, AMS 5661, AMS 5662, AMS 5663, AMS 5664, AMS 5672, AMS 5872, ASTM B408, ASTM B805, UNS N09925
Germany: DIN 17742, DIN 17753, DIN 17754, W.Nr. 2.4858
United Kingdom: BS 3076, BS HR 6
Europe: EN 10095, EN 10204-3.1
Japan: JIS G4902, JPI-SB46

We can provide the following the form:Incoloy alloy925 coil; Incoloy alloy925 strip;Incoloy alloy925 plate; Incoloy alloy925 sheets; Incoloy alloy925 tube; Incoloy alloy925 pipe;Incoloy alloy925 flat; Incoloy alloy925 bar

Incoloy alloy 925 has a wide range of applications in various industries, including:
Oil and Gas Industry: Incoloy alloy 925 is widely used in oil and gas industry due to its high strength, excellent corrosion resistance, and resistance to sulfide stress cracking in sour environments. It is used in various components of downhole tools, such as subsurface safety valves, tubing hangers, and packers.

Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications.
Trade names:
UNS N08825
W.Nr. 2.4858
Standards:
United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829
Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU
Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858
France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325
United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829
Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031

We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar

BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858

Refining and Chemical Processes
Distiller
chemical reactor
Hydrogen Chloride Hydrogenation Reactor
Marine Engineering
Nuclear Fuel Reprocessing Equipment

Haynes 188 is a high-temperature, high-strength, and high-corrosion-resistant superalloy developed and produced by Haynes International in the United States. It is typically used in high-temperature, high-pressure, and corrosive environments. Haynes 188 alloy is renowned for its outstanding high-temperature strength and excellent corrosion resistance.
The main components of Haynes 188 alloy include nickel, chromium, molybdenum, iron, titanium, aluminum, and tantalum. The combination of these elements gives Haynes 188 extremely high heat resistance and corrosion resistance. It can be used at temperatures as high as 1095 and has excellent oxidation and thermal corrosion resistance. Additionally, Haynes 188 has good machinability, weldability, and castability, making it suitable for manufacturing components of various shapes and sizes.
The following are the international standards for Haynes 188 alloy:
United States: AMS 5608, AMS 5772, AMS 5801, AMS 5796, AMS 5797, AMS 5800, AMS 5879, AMS 6925, AMS 5803, AMS 5596, AMS 5708, AMS 5804, AMS 5806, AMS 5799, AMS 5836, AMS 5875, AMS 5954, ASTM B574, ASTM B574M, ASTM B435, ASTM B582, UNS R30188
Europe: EN 2.4683, EN 2.4684, EN 2.4694
Germany: DIN 17743
France: AFNOR Z 20 CNDT 35.20, AIR 9165
United Kingdom: BS HR 203, BS HR 504, BS HR 505
Japan: JIS NW 5886

We can provide the following the form:Haynes 188 coil; Haynes 188 strip;Haynes 188 plate; Haynes 188 sheets; Haynes 188 tube; Haynes 188 pipe;Haynes 188 flat; Haynes 188 bar

GB:GH5188/JIS:NW 6190/UNS:R30188/W.Nr:2.4683

Haynes 188 is primarily used in aerospace, petrochemical, chemical, energy, and marine fields. In aerospace, Haynes 188 is commonly used to manufacture components such as turbine blades, combustors, and nozzles in turbine engines. In petrochemical, chemical, and energy fields, Haynes 188 is often used to manufacture petrochemical reactors, catalyst carriers, high-temperature pipelines, corrosion-resistant coatings, and oil extraction equipment. In the marine industry, Haynes 188 is commonly used to manufacture components in marine environments such as propellers and bearings.
Overall, Haynes 188 alloy has excellent high-temperature, high-strength, and high-corrosion resistance properties and is widely used in various industrial fields. It is an important superalloy material.

Haynes HR120 is a nickel-based alloy with excellent high-temperature strength, good resistance to oxidation and thermal fatigue, and excellent creep resistance. It is typically used in gas turbine engine components, such as turbine blades and vanes, as well as in industrial furnace applications.
Haynes HR120 offers excellent high-temperature strength, with a minimum yield strength of 830 MPa and a minimum tensile strength of 980 MPa. It also has good ductility, with a minimum elongation of 14%. In addition, it has excellent creep resistance, with a rupture life of up to 20,000 hours at 760�°C.
Haynes HR120 also has good resistance to oxidation and thermal fatigue, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 290 and excellent fatigue strength at high temperatures.
Haynes HR120 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques.
Overall, Haynes HR120 is a high-strength, high-temperature alloy with excellent resistance to oxidation and thermal fatigue, making it ideal for use in gas turbine engine components and industrial furnace applications where high-temperature and corrosive conditions are present.
Here are the international standards for Haynes HR120 alloy:
USA: AMS 5538, AMS 5794, AMS 5795, AMS 5798, AMS 5859, AMS 5860, AMS 5936, AMS 5937, AMS 5960, AMS 5961, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5990, AMS 5991, ASTM B435, ASTM B582, UNS N08120
Europe: EN 2.4869
Germany: DIN 17742
UK: BS HR 206
Japan: JIS NW 6888

We can provide the following the form:Haynes HR120 coil; HaynesHR120 strip;Haynes HR120 plate; Haynes HR120 sheets; Haynes HR120 tube; Haynes HR120 pipe;Haynes HR120 flat; Haynes HR120 bar

GB/JIS/UNS:N08120/W.Nr

Haynes HR120 is a high-strength, high-temperature alloy that is commonly used in gas turbine engine components and industrial furnace applications where high-temperature and corrosive environments are present. It offers excellent high-temperature strength, good ductility, and excellent creep resistance. The following are some of the specific applications of Haynes HR120:
Gas turbine engine components: Haynes HR120 is often used in the manufacture of turbine blades, vanes, and other components in gas turbine engines. Its high-temperature strength, excellent creep resistance, and resistance to thermal fatigue make it ideal for use in this application.

Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. This alloy is often used in gas turbine engines and industrial furnace components.Conclusion:
Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. It is commonly used in gas turbine engines, industrial furnace components, and aerospace applications. With its exceptional mechanical properties and chemical composition, it is a reliable and durable material for a wide range of demanding applications.
Incoloy alloy 901 is a nickel-iron-chromium alloy with additions of titanium and aluminum. Here are some international standards and specifications for this alloy:
American standards: AMS 5660, AMS 5661, AMS 5662, AMS 5700, AMS 5714, AMS 5870, AMS 5898, ASTM B462, ASTM B473, ASTM B649, ASTM B670, ASME SB-462, ASME SB-473, ASME SB-649, ASME SB-670
European standards: EN 2.4662
German standards: DIN NiCrFeTiAl, DIN 2.4662
British standards: BS HR 51
Japanese standards: JIS NW 4899

We can provide the following the form:Incoloy alloy901 coil; Incoloy alloy901 strip;Incoloy alloy901 plate; Incoloy alloy901 sheets; Incoloyl alloy 901 tube; Incoloy alloy 901 pipe;Incoloy alloy 901 flat; Incoloy alloy901 bar

BS:HR 51/JIS:NW 4899/UNS:N09901/W.Nr:1.4898

Incoloy Alloy 901 is widely used in gas turbine engines, industrial furnace components, and aerospace applications due to its excellent mechanical properties and resistance to oxidation and corrosion at high temperatures. Some of its typical applications are as follows:
Gas turbine engines:
Incoloy Alloy 901 is used in the hot sections of gas turbine engines, such as combustion liners, transition ducts, and afterburner parts, where high strength and resistance to oxidation and corrosion are required.
Industrial furnace components:
Incoloy Alloy 901 is used in the construction of high-temperature furnace components, such as radiant tubes, muffles, and fixtures. It offers excellent resistance to oxidation and corrosion, making it a reliable and durable material for these applications.
Aerospace:
Incoloy Alloy 901 is used in a variety of aerospace applications, including aircraft engine components, missile components, and rocket motor cases. Its high strength and excellent resistance to oxidation and corrosion make it a popular choice for these demanding applications.

329 stainless steel is a duplex stainless steel with a higher strength and corrosion resistance than austenitic stainless steels. It belongs to the family of duplex stainless steels that contain two-phase microstructures consisting of austenitic and ferritic phases in roughly equal proportions. The combination of these phases provides 329 stainless steel with a unique set of properties, making it ideal for use in various industrial applications.
Some of the key properties of 329 stainless steel include:
Corrosion resistance: 329 stainless steel offers excellent corrosion resistance, particularly in environments containing chlorides and other halides, making it ideal for use in marine and chemical processing applications.
High strength: 329 stainless steel has higher strength than austenitic stainless steels and can withstand high stress and pressure.
Weldability: 329 stainless steel is readily weldable using common welding techniques and is not prone to weld decay.
Machinability: 329 stainless steel has good machinability and can be easily machined using conventional machining techniques.
Some of the common applications for 329 stainless steel include:
Marine applications: due to its excellent corrosion resistance in seawater environments, 329 stainless steel is often used in marine applications such as propeller shafts, pump parts, and fasteners.
Chemical processing: 329 stainless steel is commonly used in chemical processing applications due to its resistance to various chemicals and high temperatures.

Oil and gas industry: 329 stainless steel is often used in oil and gas production and processing equipment, including pumps, valves, and heat exchangers.
Overall, 329 stainless steel is a highly versatile and reliable material that offers a unique combination of strength and corrosion resistance properties, making it ideal for use in a wide range of industrial applications.
Here are some of the most common international standards for 329 stainless steel:
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
EN 10088-1: Stainless steels - Part 1: List of stainless steels
EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
GB/T 1220: Stainless steel bars

We can provide the following form:329 stainless steel coil; 329 stainless stee strip;329 stainless stee plate; 329 stainless steel sheets; 329 stainless steel tubes; 329 stainless steel pipe;
329 stainless steel flat; 329 stainless steel bar

Monel 404 is a copper-nickel alloy that has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The alloy also has low permeability and good brazing properties, low magnetic induction, and high strength.
Application fields:
Monel 404 is mainly used in chemical and petrochemical and marine development and other fields. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc.

We can provide the following the form:Monel alloy404 coil; Monel alloy 404 strip;Monel alloy 404 plate; Monel alloy 404 sheets; Monel alloy 404 tube; Monel alloy 404 pipe;Monel alloy 404 flat; Monel alloy 404 bar

UNS:N04404

Haynes 617 is a nickel-chromium-cobalt-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and excellent resistance to carburization and sulfidation. It is commonly used in gas turbine engine components, industrial furnace applications, and other high-temperature applications.
Haynes 617 has a nominal composition of 44.5% nickel, 20-24% chromium, 8-10% molybdenum, 0.5% maximum copper, 0.15% maximum carbon, 1.0% maximum cobalt, 0.5% maximum silicon, 1.0% maximum manganese, 0.015% maximum sulfur, 0.015% maximum phosphorus, and the balance iron.
Haynes 617 offers excellent mechanical properties at high temperatures, making it ideal for use in gas turbine engine components such as combustion liners, transition ducts, and exhaust systems. Its high-temperature strength and resistance to carburization and sulfidation make it suitable for use in industrial furnace applications such as radiant tubes, muffles, and retorts.
In addition to its high-temperature strength and resistance to oxidation and carburization, Haynes 617 also offers good resistance to thermal shock and thermal fatigue. This makes it ideal for use in applications that require resistance to cyclic heating and cooling, such as gas turbine engine components and industrial furnace applications.
Overall, Haynes 617 is a versatile high-temperature alloy that offers excellent mechanical properties and resistance to corrosion and oxidation in high-temperature environments. Its use in gas turbine engine components and industrial furnace applications has been well-established, and it continues to be an important material in these industries.
US standards: AMS 5887: Standard specification for Haynes 617 plate, sheet, and strip; AMS 5888: Standard specification for Haynes 617 rod, wire, and bar; AMS 5889: Standard specification for Haynes 617 seamless or welded pipe; ASME SB 166: Standard specification for Haynes 617 rod, wire, and bar; ASME SB 167: Standard specification for Haynes 617 seamless pipe; ASME SB 168: Standard specification for Haynes 617 plate, sheet, and strip; ASME SB 564: Standard specification for Haynes 617 forgings.

We can provide the following the products:Haynes 617 alloy coil; Haynes 617 alloy strip;Haynes 617 alloy plate; Haynes 617 alloy sheets; Haynes 617 alloy tube; Haynes 617 alloy pipe;Haynes 617 alloy flat; Haynes 617 alloy bar

GB/JIS:NW 6617/UNS:N06617/W.Nr:2.4663

Haynes 242 is a nickel-chromium-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and resistance to hot corrosion and thermal fatigue. It is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners, as well as in industrial furnace applications.
Haynes 242 offers excellent high-temperature strength, with a minimum yield strength of 880 MPa and a minimum tensile strength of 1100 MPa. It also has good ductility, with a minimum elongation of 12%. In addition, it has good thermal stability and resistance to thermal fatigue, making it suitable for use in high-temperature applications.
Haynes 242 also has good resistance to oxidation and hot corrosion, which makes it suitable for use in gas turbine engine components that are exposed to high-temperature and corrosive environments. It has a maximum HB hardness of 300 and excellent fatigue strength at high temperatures.
Haynes 242 is typically available in the form of sheet, plate, bar, and wire. It can be machined using conventional methods and is weldable using standard welding techniques.
Overall, Haynes 242 is a high-strength, high-temperature alloy with excellent resistance to oxidation and hot corrosion, making it ideal for use in gas turbine engine components and industrial furnace applications.
Here are the national standards for Haynes 242 alloy:
United States: AMS 5708, AMS 5776, AMS 5777, AMS 5853, AMS 5854, AMS 5857, AMS 5858, AMS 5895, AMS 5896, AMS 5897, AMS 5898, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B435, ASTM B572, UNS R30556
Europe: EN 2.4683
Germany: DIN 17743, VdTÃ??V 435
United Kingdom: BS HR 202, BS HR 501, BS HR 502
Japan: JIS NW 6242

We can provide the following the form:Haynes 242 coil; Haynes242 strip;Haynes 242 plate; Haynes 242 sheets; Haynes 242 tube; Haynes 242 pipe;Haynes 242 flat; Haynes 242 bar

GB/JIS:NW 625/UNS:N10242/W.Nr:2.4683

Haynes 242 is typically used in gas turbine engine components, such as turbine blades, vanes, and combustor liners. It is also used in industrial furnace applications, including muffles, retorts, and heat treating fixtures.
The high-temperature strength and excellent resistance to oxidation and hot corrosion make Haynes 242 an ideal material for use in high-temperature and corrosive environments. It is commonly used in aerospace, power generation, and industrial applications where high-temperature and corrosive conditions are present.

Inconel nickel alloy
It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings

Product features:
1, internal and external screw steel wire fixed, so that the insulation material is evenly coated on the inner tube; hose bending, will not cause the thermal insulation cotton bag and cracking phenomenon.
2, hose, cotton insulation, plastic outer hose to achieve the best effect of heat preservation all blend into one harmonious whole.

3, inner and outer spiral wire support, improve the strength of the hose; hose bending, creasing uniform and beautiful.
Scope of application: the central air conditioning and ventilation system includes humid environment, slightly corrosive environment (such as marine climate) and complex installation environment (in favor of finished product protection).
Product features: the mechanism of the integration of the winding jacket, no longitudinal joints, thermal insulation, jacket without cracking, glass fiber filament winding to strengthen, prevent tearing.

Range of specifications (diameter): 52 ~ phi phi 559mm
Temperature range: -30 ~ +140
Maximum air flow rate: 30m/s
Maximum working pressure: 3000pa
Bending radius: 0.54*d+25mm
Centrifugal glass wool thickness: 25mm
Centrifugal glass wool density: 20 ~ 24kg/m3
Fire performance: b1 level (hard to burn)

(1) Grade 301 Good ductility, used for molded products. It can also be hardened by mechanical processing. Good weldability. Wear resistance and fatigue strength are better than grade 304 stainless steel, used in products such as springs, steel structures, wheel covers.

(2) Grade 302:The corrosion resistance is the same as grade 304, and the strength is better due to the relatively high carbon content.

(3) Grade 303:It is easier to cut than grade 304 by adding a small amount of sulfur and phosphorus.

(4) Grade 304: It is a stainless steel that is non-magnetic and cannot be changed by heat treatment. The standard composition is 18 % chromium plus 8 % nickel. Used in products such as: corrosion-resistant containers, tableware, furniture, railings, medical equipment, some mobile phone frames.

(5) Grade 304L:It has the same characteristics as grade 304, but with low carbon, it is more resistant to corrosion and easy to heat treatment, but has poor mechanical properties. It is suitable for welding and products that are not easy to heat treatment.

(6) Grade 304N:With the same characteristics as grade 304, it is a nitrogen-containing stainless steel. Nitrogen is added to increase the strength of the steel.

(7) Grade 309:Better temperature resistance than grade 304.

(8) Grade 309S:With a large amount of chromium and nickel, it has good heat resistance and oxidation resistance, and is used in products such as heat exchangers, boiler components, and jet engines.

(9) Grade 310S:Contains the most chromium and nickel, so it has the best heat resistance and oxidation resistance. It is used in products such as heat exchangers, boiler components, and electrical equipment.

(10) Grade 316: After grade 304, the second most widely used steel grade, mainly used in the food industry and surgical equipment, the addition of molybdenum gives it a special structure that is resistant to corrosion. Because of its better resistance to chloride corrosion than grade 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery units. Grade 18/10 stainless steels generally also meet this application level. Especially used in chemical, seaside and other corrosive environments, ship assembly, building materials.

(11) Grade 316 L: Low carbon, so it is more resistant to corrosion and easy to heat treatment. It is used in products such as chemical processing equipment, nuclear power generators, and refrigerant storage tanks.

(12) Grade 321:Similar to grade 304, except that the risk of corrosion of the material weld is reduced due to the addition of titanium elements, suitable for welding. Used in products such as brewing equipment, steam pipes, aerospace parts.

(13) Grade 347 The stabilizing element niobium is added and is mainly used for welded parts used at high temperatures.

Monel K500 Monel alloy is a high-strength nickel-copper alloy with excellent corrosion resistance. Its main components are nickel and copper, and it also contains a small amount of beneficial elements such as aluminum, iron, and titanium. This alloy not only has corrosion resistance, but also has excellent mechanical properties, high strength, hardness and toughness, and can withstand high temperature, high pressure and corrosion in marine environments. Monel K500 alloy is widely used in marine and subsea oil and gas industry, machinery manufacturing, aerospace and other fields. Compared with other nickel-copper alloys, Monel K500 alloy is more corrosion-resistant. It can resist the erosion of nitric acid, seawater, alkaline solution and other media, and can also maintain stable performance under high temperature and high pressure conditions. Due to its low magnetic properties, Monel K500 alloy is also widely used in the electrical and electronic industries. In addition, it also has good weldability and processing performance, and can be formed and manufactured by various methods such as casting, forging, and cold working, so as to meet the manufacturing needs of complex workpieces in different industrial fields. In general, Monel K500 alloy has good corrosion resistance, high mechanical strength, excellent stability and comprehensive performance, and is a very excellent high-performance alloy material. With the continuous development and innovation of science and technology, Monel K500 alloy has a very broad application prospect in the future, and will bring more benefits to human production and life.
American standard designation: UNS N05500, Specifications: ASTM B865, ASTM B164, ASTM B127, ASTM B165, ASTM B564, ASTM B865, ASTM B366, ASTM B865, AMS 4676, AMS 4676, AMS 4677, AMS 4677, AMS 4678, AMS 4678, AMS 4679, AMS 4679.
German standard designation: W.Nr. 2.4375, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754.
Japanese standard designation: JIS NW5500, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: NS321, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.

We can provide the following the form:Monel alloyK500 coil; Monel alloy K500 strip;Monel alloy K500 plate; Monel alloy K500 sheets; Monel alloy K500 tube; Monel alloy K500 pipe;Monel alloy K500 flat; Monel alloy K500 bar

GB:NS321; JIS:NW5500; UNS:N05500; W.Nr:2.4375

INCOLOY ALLOY 020 is a nickel-chromium-iron-molybdenum alloy with excellent resistance to corrosion in a wide range of environments. This alloy has a high nickel content, which provides superior resistance to oxidizing chemicals and reduces the risk of stress corrosion cracking. INCOLOY ALLOY 020 also has high resistance to pitting and crevice corrosion, making it ideal for use in harsh chemical processing environments.
In conclusion, INCOLOY ALLOY 020 is a highly versatile alloy with excellent corrosion resistance and mechanical properties, making it suitable for use in a variety of industries and applications.
Incoloy alloy 020 is also known as Alloy 20. Here are some international standards and specifications for this alloy:
American standards: ASTM B473, ASTM B462, ASTM B729, ASTM B464, ASTM B729, ASTM B366, ASTM B462, ASTM B463, ASTM B464, ASTM B468, ASTM B729, ASTM B729, ASTM B729, ASTM B462, ASTM B729, ASME SB-473, ASME SB-462, ASME SB-729, ASME SB-464, ASME SB-366, ASME SB-462, ASME SB-463, ASME SB-464, ASME SB-468, ASME SB-729, ASME SB-729, ASME SB-729, ASME SB-462, ASME SB-729
European standards: EN 2.4660, EN 2.4663
German standards: DIN NiCr20CuMo, DIN 2.4660, DIN 2.4663
British standards: BS NA 24
Japanese standards: JIS NW 024 (similar to Alloy 20)
It's important to note that these standards may have slightly different compositions or properties than Incoloy alloy 020/Alloy 20, so it's important to verify that they meet your specific requirements before specifying them.
Regenerate response

We can provide the following the form:Incoloy alloy020 coil; Incoloy alloy 020 strip;Incoloy alloy 020 plate; Incoloy alloy 020 sheets; Incoloy alloy 02 tube; Incoloy alloy 020 pipe;
Incoloy alloy 020 flat; Incoloy alloy 020 bar

BS:NA 24/JIS:NW024/UNS:N08020/W.Nrï¼?2.4663

INCOLOY ALLOY 020 is widely used in a variety of industries due to its excellent corrosion resistance and high strength. Some common applications include:
Chemical processing: INCOLOY ALLOY 020 is frequently used in chemical processing equipment such as heat exchangers, tanks, and piping.
Oil and gas: INCOLOY ALLOY 020 is used in oil and gas production due to its resistance to sulfur-containing gases and high temperatures.
Power generation: INCOLOY ALLOY 020 is used in power generation equipment such as boilers, steam generators, and turbine components due to its high strength and corrosion resistance.
Marine: INCOLOY ALLOY 020 is used in marine environments due to its resistance to seawater and other harsh corrosive environments.

321 stainless steel is an austenitic stainless steel that contains titanium as a stabilizing element. This element helps to prevent chromium carbide precipitation, which can occur during high-temperature service, making it ideal for use in high-temperature applications.
Some of the key properties of 321 stainless steel include:
High-temperature resistance: 321 can withstand high temperatures up to 870�°C (1600�°F) without losing its strength or corrosion resistance properties, making it ideal for use in applications such as furnace parts and exhaust systems.
Corrosion resistance: 321 offers excellent resistance to corrosion, including aqueous corrosion and stress corrosion cracking.
Strength and toughness: 321 has good strength and toughness, making it suitable for use in demanding applications.
Fabricability: 321 is easily formable using standard methods, and can be welded using common welding techniques.
Some of the common applications for 321 stainless steel include:
Exhaust systems in automobiles, aircraft, and industrial equipment
High-temperature furnace parts, such as burners and heating elements
Chemical processing equipment
Jet engine parts
Heat exchangers
Overall, 321 stainless steel is a highly reliable and versatile material that is well-suited for use in high-temperature applications where superior corrosion resistance and strength are required.
The following are some of the commonly used international standards for 321 stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10095: Heat resisting steels and nickel alloys
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
JIS G4305: Cold-rolled stainless steel plate, sheet and strip
GB/T 4237: Hot rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip

We can provide the following form:321 stainless steel coil; 321 stainless stee strip;321 stainless stee plate; 321 stainless steel sheets; 321 stainless steel tubes; 321 stainless steel pipe; 321 stainless steel flat; 321 stainless steel bar

Applied to open-air machines, heat-resistant parts of building materials and parts with difficulty in heat treatment in chemical, coal and petroleum industries that require high resistance to intergranular corrosion
1. Petroleum waste gas combustion pipeline
2. Engine exhaust pipe
3. Boiler shell, heat exchanger, heating furnace parts
4. Silencer parts for diesel engines
5. Boiler pressure vessel
6. Chemical transport vehicle
7. Expansion joints
8. Spiral welded pipes for furnace pipes and dryers

BESTONE QUARTZ SURFACES

IMAGINE a quartz stone color with a natural stone look and high hardness as it features. It might be hard to imagine 10 years ago but now it quite a trend that more kitchen builders and designers favor quartz stone with marble look. This kind of quartz stone, Bestone calls it VEINED.

A veined quartz stone is not trying to compete with natural stone, but replace it.


Slab Size:3230*1630mm/3030*1430mm
Thickness:12/15/20/25/30mm
Cut-to-size:400*400mm, 600*600mm, 800*800mm and other customized sizes

409 stainless steel is a ferritic stainless steel commonly used in machinery, construction and other engineering. Due to the existence of austenite grains, its mechanical properties are greatly improved. And due to the addition of a lot of alloying elements, the strength and hardness are also greatly improved. It has good mechanical properties and high temperature corrosion resistance. It contains 11% chromium, the minimum required to form a passive surface film that makes stainless steel corrosion resistant. It combines good high temperature corrosion resistance with moderate strength, good formability and overall cost.

We can provide the following form:409 stainless steel coil; 409 stainless stee strip;409 stainless stee plate; 409 stainless steel sheets; 409 stainless steel tubes; 409 stainless steel pipe;
409 stainless steel flat; 409 stainless steel bar

409 is most commonly used in truck exhaust systems, agricultural equipment, and heat and gas turbine exhaust silencers.

Haynes 25, also known as L-605 alloy, is a high-temperature, high-strength, and highly corrosion-resistant superalloy. It is developed and produced by Haynes International, Inc. in the United States and is typically used in high-temperature, high-pressure, and highly corrosive environments.
The main components of Haynes 25 alloy are cobalt, chromium, molybdenum, iron, and tungsten, with cobalt content exceeding 50%. This gives it better high-temperature strength and corrosion resistance than other nickel-based alloys. The alloy also has excellent high-temperature oxidation and thermal corrosion resistance, can be used in high-temperature environments up to 1200â??, and has good machinability and weldability.
Here are the Haynes 25 alloy's various country standards in English:
US: AMS 5537, AMS 5796, AMS 5797, AMS 5800, AMS 5801, AMS 5803, AMS 5876, AMS 5894, ASTM B424, ASTM B425, UNS R30605
Europe: EN 2.4964
Germany: DIN 17744, VdTÃ??V 424
France: AFNOR NC 22 K, AIR 9165
UK: BS HR 5, BS HR 504, BS HR 505
Japan: JIS NW6025

We can provide the following the form:Haynes 25 coil; Haynes 25 strip;Haynes 25 plate; Haynes 25 sheets; Haynes 25 tube; Haynes 25 pipe;Haynes 25 flat; Haynes 25 bar

GB/JIS:NW alloy L-605/UNS:R30605/W.Nr:2.4964

Haynes 25 alloy has a wide range of applications in various industries due to its excellent high-temperature strength, corrosion resistance, and oxidation resistance. It is commonly used in gas turbine engine components, such as combustor liners, turbine blades, and afterburner parts. It is also used in the aerospace industry for hot section components, including heat shields, jet engine exhaust systems, and rocket motor components. In addition, Haynes 25 alloy finds use in chemical and petrochemical processing, where it is utilized for equipment such as reactors, distillation columns, and heat exchangers. It is also employed in high-temperature furnace components, such as muffles, retorts, and flame shields.

Incoloy Alloy 907 is a high-strength, high-temperature alloy mainly composed of nickel, chromium, iron, molybdenum, niobium and other elements. It has excellent corrosion resistance, oxidation resistance and creep resistance, and is widely used in aviation, energy, chemical and other fields. The following is the detailed introduction of Incoloy Alloy 907:
performance:
Corrosion resistance: Incoloy Alloy 907 has good corrosion resistance in various environments such as acid, alkali and salt.
Oxidation resistance: Incoloy Alloy 907 has good oxidation resistance at high temperature, and can resist oxidation, thermal corrosion and high temperature oxidation.
Creep resistance: Incoloy Alloy 907 has good creep resistance under high temperature and high stress.
Processability: Incoloy Alloy 907 can be processed by various processing methods, such as forging, heat treatment, cold working, hot rolling, etc.
The international standard designations for Incoloy alloy 907 include UNS N19907 and W.Nr. 2.4663. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan.
Here are the specific standards and designations for Incoloy alloy 907 in different countries:
United States: AMS 5541, AMS 5542, AMS 5544, AMS 5548, ASTM B366, ASTM B408, UNS N19907
Germany: DIN 17750, DIN 17752, DIN 17753, DIN 17754, W.Nr. 2.4663
United Kingdom: BS HR 505
Europe: EN 10095
Japan: JIS H4551, JPI-SB46

We can provide the follwoing the form:Incoloy alloy907 coil; Incoloy alloy907 strip;Incoloy alloy907 plate; Incoloy alloy907 sheets; Incoloy alloy907 tube; Incoloy alloy907 pipe;Incoloy alloy907 flat; Incoloy alloy907 bar

BS:HR 505/JIS:NW4894/UNS:N19907/W.Nr:2.4669

Incoloy Alloy 907 is widely used in aviation, energy, chemical and other fields, such as:
Heat treatment equipment and furnaces in high temperature oxidation environment
Components of turbine engines and jet engines in aerospace
Reactors, distillation towers and other components of chemical equipment
Fuel elements in the nuclear industry, reactor internal structures, etc.
It should be noted that when selecting and using Incoloy Alloy 907, it needs to be confirmed according to the specific situation and comply with local standards and regulations.

Monel R-405 alloy (UNS N04405) increases the sulfur content in the Monel 400 composition to enhance the machinability and become a free-cutting Monel alloy. Alloy 405 is an easy-to-machine version of Alloy 400. Alloy 405 adds a certain amount of sulfur, and the sulfide produced has chip breaking effect during machining, so it is suitable for automatic nut machine.
Like Alloy 400, Alloy 405 is resistant to corrosion by seawater, steam, and alkaline solutions at elevated temperatures. Alloy 405 is a solid solution alloy that can only be hardened by cold working. This nickel-based alloy also exhibits good corrosion resistance, weldability and high strength. The alloy exhibits low corrosion rates in fast-flowing brine and seawater environments and is well resistant to stress corrosion cracking in freshwater environments. Good corrosion resistance makes it widely used in marine and non-oxidizing chloride solution environment
American standard designation: UNS N04405, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4674, AMS 7234.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.

We can provide the following the form:Monel alloy405 coil; Monel alloy 405 strip;Monel alloy 405 plate; Monel alloy 405 sheets; Monel alloy 405 tube; Monel alloy 405 pipe;Monel alloy 405 flat; Monel alloy 405 bar

1.The product can display various of items in a limited space , makes the space uses effectively.
2.We can design and make according to each customer's requirement.
3.Our company have 10 years experiences,we can provide one step service,design,production and packaging.

Quality Mold Starts from Excellent custom mold design

At YWX mold design manufacturers , our experienced designers play a crucial role in ensuring the quality of our tools. With years of expertise, the YWX mold design company collaborates closely with customers to develop well-designed molds that are easy to maintain and cost-effective to produce.

Our skilled in-house design team, with over 15 years of experience, offers a comprehensive design package. Our mould design services include feasibility studies, design recommendations, filling simulation, Moldflow analysis, and 2D & 3D tool design using CAD, Unigraphics, and other software.

If needed, our injection mold design services designers can be involved in the early stages of a project to support part development and enable a tool-specific design, saving you time and costs.

Choose the YWX mold design manufacturer for excellent custom injection tooling design services and engineering expertise.

Haynes 718 alloy is a precipitation-hardening nickel-chromium alloy that offers high strength, toughness, and resistance to corrosion and high-temperature environments. It was developed in the 1950s for use in gas turbine engine components, and has since found a wide range of applications in other high-stress industries such as aerospace, nuclear, and chemical processing.
The alloy is characterized by its excellent mechanical properties, including high tensile and yield strength, good ductility and toughness, and resistance to fatigue, creep, and stress-corrosion cracking. These properties are achieved through a combination of precipitation hardening and solid-solution strengthening, which involve heat treatment processes that cause the formation of fine, uniform precipitates within the metal matrix.
Haynes 718 alloy also has good resistance to oxidation and other forms of corrosion, particularly in high-temperature environments. It is capable of maintaining its properties at temperatures up to around 1300�°F (700�°C), making it suitable for use in hot sections of gas turbine engines, nuclear reactor components, and other high-temperature applications.
In addition to its mechanical and corrosion resistance properties, Haynes 718 alloy also has good weldability and machinability. It can be readily welded using a range of methods, and can be easily machined using standard metalworking techniques.
Overall, Haynes 718 alloy is a versatile and reliable material that has proven itself in a wide range of demanding applications. Its combination of high strength, toughness, and resistance to corrosion and high-temperature environments make it an ideal choice for use in critical components where reliability and performance are paramount.
Haynes 718 alloy standards vary by country. Here are some of the common ones:
United States Standards: AMS 5596: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, Haynes 718 AMS 5662: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 AMS 5663: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5664: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5832: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718 AMS 5962: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, Haynes 718 AMS 5838: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718SPF

We can provide the following the prodcuts:Haynes 718 alloy coil; Haynes 718 alloy strip;Haynes 718 alloy plate; Haynes 718 alloy sheets; Haynes 718 alloy tube; Haynes 718 alloy pipe;Haynes 718 alloy flat; Haynes 718 alloy bar

GB/JIS:NW7718/UNS:NW7718/W.Nr:2.4668

INCONEL 22 is extremely resistant to water and general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, tough and versatile even at high temperatures. A nickel base with 22% chromium, Inconel 22 is completely austenitic. This means it is non-magnetic and will not harden with heat treatment. Nickel also helps protect the alloy from corrosion by halides such as chloride and fluoride when subjected to extreme heat. In addition to nickel and chromium, Inconel 22 contains 14% molybdenum and 3% tungsten. These two metals make the alloy resistant to wet reducing media such as iron, copper salts and nitric acid. Combined with chromium's resistance to wet oxidizing media such as iron salts, copper salts and nitric acid, this makes Inconel 22 particularly suitable for use in highly corrosive environments where safety is paramount.
American standard designation: UNS N06022, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B335, ASTM B622, ASTM B626, ASTM B366, ASTM B574, ASTM B622, ASTM B619, ASTM B775, ASTM B462, ASTM B564, ASTM B472, ASTM B775, ASTM B829.
German standard designation: W.Nr. 2.4602, Specifications: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754.
Japanese standard designation: JIS NW6022, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: GH3030, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012.

We can provide the following the form:Inconel22 alloy coil; Inconel22 alloy strip;Inconel22 alloy plate; Inconel22 alloy sheets; Inconel22 alloy tube; Inconel22 alloy pipe;
Inconel22 alloy flat; Inconel22 alloy bar

GB:GH3030;JIS:NW6022;UNS:N06022;W.Nr:2.4602

Pollution control (flue gas desulfurization), waste treatment, power generation, pulp and paper processing, marine applications, and chemical and petrochemical processing.

110v red super speed electric blower ventilator fan mainly used for ventilation

110v red super speed electric blower ventilator fan

Material

1. Ventilator shell: made of hot-dipped galvanized sheet which has spray painted automobile coating on its surface
2. Impeller: made of aluminum casting alloy, 7 blades.
3. Fan guard: dusting, zinc coating
4. Switch: press button.
5. Integrated plastic handle for easy carrying.
6. Motor: it is wrap around with international standard copper wire
7. With radiating rib aluminum casting integrated motor shell.

Features

Strong air pressure, high rotational speed and air volume, strong suction, reasonable structure and superior performance

Available sizes:

200mm, 250mm, 300mm, 350mm, light weight with handle, have a integrated switch

Voltage: 110v

Frequency: 50hz, 60hz

Plug: european, american, british, japanese, etc.


Application

1. Exhaust and supply flesh air in remote or deep operating zone, confined space construction and other bad air environment.
2. Exhausting welding waste gas, smoke, dust, the smell of paint during shipbuilding and maintenance.
3. Field of machinery, chemical industry, plant warehouse, underground sinking and driving engineering

thickness: 0.35mm-2mm

Width:1.83 M or 2M

Anti-slip & anti-resistant & waterproof

More than 200 designs for option

This 1.25L glass blender jar is a compatible replacement designed for Oster blender systems widely used in household and export markets across Latin America and North America.

It is engineered for users who need to replace a damaged or worn blender jar while maintaining stable blending performance, safe operation, and proper fit with Oster-style blender bases.

This model is widely used in aftermarket replacement channels, appliance repair distribution, and blender spare parts supply networks.

Product Specifications
Model: A06
Capacity: 1.25L
Height: 210mm
Bottom outer diameter (including locking thread): 69mm
Bottom inner diameter: 53mm

Oster Compatibility Overview
This glass blender jar is designed with a bottom locking structure compatible with Oster-type 2-tab twist lock base systems.
The 69mm bottom outer diameter ensures stable engagement with Oster-style blender drive coupling systems commonly found in classic Oster and Osterizer blender series.
It is suitable for multiple Oster-compatible blender models used in Latin American and North American markets.

Who This Product Is For
Importers of blender spare parts
Wholesalers and distributors
Appliance repair markets
E-commerce spare parts sellers
OEM private label projects

If you need compatible blender jars, replacement blender jars, or custom OEM solutions, contact us today to discuss your project requirements.

Port: Foshan, China

Payment Terms: L/C, T/T, Western Union and so on.

Diesel Engine: Perkins,Cummins, Duetz, Volvo, MTU, ISUZU, Weifang, Weichai, Yangdong, Lijia, Yuchai engine

Rated Voltage: 230/400

Construction: Open Type or Silent Type

Alternator : Copy stamford , stamford , LEROY-SOMER, marathon, engger, ST, STC, TFW and so on.

Power : 5KW-2000KW

Style: Denyo, silence, super silence , container, open type and so on.

Rated Frequency: 50Hz or 60Hz

Engine Speed: 1500rpm or 1800rpm

Type: Micro-Computer Control Automatic Diesel Generator

Installation Method: Fixed

Stroke: Four Stroke

Cooling Method: Water Cooling

Output Type: AC Three Phase

Speed: HSS

Conditions of Use: Land Use

Usage: Common Units, Standby Unit, Emergency Crew

Landuse Type of Unit: Low Noise Excitation

Mode: AC Rotating Exciter

Staring System: Electric Start

Excitation Type: Brushless and Selfexcited

Fuel Consumption Rate (G/Kw.H):

Haynes 230 is a nickel-based superalloy that is known for its high strength, excellent resistance to oxidation and corrosion, and good thermal stability. It was developed by Haynes International, Inc., and is commonly used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries.
Chemical Composition: Haynes 230 is composed of a range of elements, including nickel (Ni), chromium (Cr), molybdenum (Mo), iron (Fe), cobalt (Co), manganese (Mn), silicon (Si), carbon (C), and aluminum (Al). The chemical composition of Haynes 230 can be adjusted within certain ranges to meet specific application requirements.
Mechanical Properties: Haynes 230 has excellent mechanical properties, including high strength, good ductility, and toughness. Its yield strength is 685 MPa and its tensile strength is 1025 MPa. It also has a 42% elongation rate.
Thermal Properties: Haynes 230 exhibits good thermal stability, making it an excellent choice for high-temperature applications. Its melting point is 1305�°C (2381�°F), and it has a thermal expansion coefficient of 13.7 �µm/m�·K (7.6 �µin/in�·�°F).
Corrosion and Oxidation Resistance: Haynes 230 has excellent resistance to oxidation and corrosion in high-temperature and high-stress environments. It has a good resistance to sulfur-bearing gases, such as hydrogen sulfide (H2S) and sulfur dioxide (SO2), and can withstand harsh chemical environments.
Weldability: Haynes 230 can be welded using a variety of methods, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and resistance welding. However, special precautions need to be taken during welding to avoid cracking and other defects.
Here are the country standards for Haynes 230 alloy:
USA: AMS 5878, AMS 5879, AMS 5962, AMS 5963, AMS 5964, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5998, AMS 5999, AMS 5877, ASTM B366, ASTM B435, ASTM B572, ASTM B619, ASTM B622, ASTM B626, ASTM B366, UNS N06230
Europe: EN 2.4733
Germany: DIN 17742, VdTÃ??V 546
UK: BS HR 201
Japan: JIS NW 6230

We can provide the following the form:Haynes 230 coil; Haynes230 strip;Haynes 230 plate; Haynes 230 sheets; Haynes 230 tube; Haynes 230 pipe;Haynes 230 flat; Haynes 230 bar

GB/JIS:NW 6230/UNS:R06230/W.Nr:2.4733

Haynes 230 is widely used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. It is also used in heat exchangers, industrial furnaces, and in the production of petroleum and natural gas. Its excellent mechanical properties, corrosion and oxidation resistance, and good weldability make it a popular choice for a wide range of applications.

Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries.
The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance.
Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time.
Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries:
United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718
Europe: EN 2.4668
Germany: DIN 17744, VdTÃ??V 718
France: AFNOR NC 19 Fe Nb
United Kingdom: BS HR 201, BS HR 401, BS HR 501
Japan: JIS NW 0771

We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar

BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669

Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including:
Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.

Inconel Alloy 725 (UNS N07725) is a nickel chromium molybdenum niobium alloy with high corrosion resistance and age hardening to very high strength. Its composition is similar to Inconel 625 alloy. Inconel 625 is an alloy widely used in various corrosive environments. Its strength can be improved by cold work hardening and has been used for small bolts. Inconel 725 alloy basically has the same corrosion resistance as Inconel 625 alloy, but Inconel 725 alloy is an alloy that is age-strengthened by a heat treatment process. Since the stress of Inconel 725 alloy is through heat treatment instead of cold working, the plasticity and toughness are still high, and it is suitable for making high-strength, high-corrosion-resistant parts.
Here are the common national standard designations of Inconel 725:
US standard designations: UNS N07725, AMS 5660, AMS 5832, AMS 5772, AMS 5796, AMS 5581, ASTM B805, ASTM B805, ASTM B805. European standard designations: EN 2.4668, EN 10269, EN 10272, EN 10216-5, EN 10250-4, EN 10263-4, EN 10297-2, EN 10302, EN 10312, EN 12266-1, EN 12560-6, EN 13480-3, EN 13480-5, EN 13544-2, EN 1592-4. German standard designations: DIN NiCr22Mo9Nb, DIN 2.4627, DIN 17742, DIN 17744, DIN 17752, DIN 17754, DIN 17751. Japanese standard designations: JIS NCF725, JIS G4902, JIS G4941, JIS G5502, JIS G5122. Chinese standard designations: GB/T UNS N07725, GB/T 14992, GB/T 15001, GB/T 15003, GB/T 15004, GB/T 21833.

We can provide the following the form:Inconel725 alloy coil; Inconel725 alloy strip;Inconel725 alloy plate; Inconel725 alloy sheets; Inconel725 alloy tube; Inconel725 alloy pipe;
Inconel725 alloy flat; Inconel725 alloy bar

Used for pipe fittings, joints and bearings in acid-resistant equipment. It is also widely used in marine ship equipment;
GB:00Cr21Ni57Mo8Nb5TiA1;JIS:NCF725;UNS:N07725;W.Nr 2.4668

Incoloy Alloy 926 is a super-austenitic nickel-based alloy with high levels of molybdenum, nitrogen, and chromium. It is known for its excellent corrosion resistance in a variety of challenging environments, including sulfuric acid, hydrochloric acid, and seawater. Here is a detailed introduction to Incoloy Alloy 926 and its applications:
Incoloy alloy 926 is a super-austenitic nickel-based alloy with high corrosion resistance and excellent mechanical properties at high temperatures. It has a chemical composition of 22% chromium, 25% molybdenum, 6% tungsten, and 0.5% nitrogen, with nickel and iron making up the balance. The alloy also contains small amounts of copper and titanium.
Incoloy alloy 926 is known for its excellent resistance to a wide range of corrosive environments, including chloride ion stress-corrosion cracking and pitting and crevice corrosion. It also has good resistance to sulfuric acid and phosphoric acid, as well as seawater and brine solutions. The alloy's high nickel and molybdenum content provides excellent resistance to reducing environments, while its chromium content enhances its resistance to oxidizing environments.
In terms of mechanical properties, Incoloy alloy 926 exhibits high strength and toughness, along with excellent weldability and formability. It can be fabricated using a variety of techniques, including hot and cold working, machining, and welding.
Due to its excellent corrosion resistance and mechanical properties, Incoloy alloy 926 is commonly used in a variety of industries, including chemical processing, oil and gas, nuclear, marine, and desalination. It is often used in applications involving sour gas environments, such as in the production of oil and gas, as well as in heat exchangers, pressure vessels, and piping systems.
The international standards and specifications for Incoloy alloy 926 are as follows:
United States: ASTM B649, AMS 5737, AMS 5853, UNS N08926 Europe: EN 1.4529, SEW 400 Germany: DIN 17752, DIN 17754, DIN 17750, W.Nr. 1.4529

We can provide the following the form:Incoloy alloy926 coil; Incoloy alloy926 strip;Incoloy alloy926 plate; Incoloy alloy926 sheets; Incoloy alloy926 tube; Incoloy alloy926 pipe;Incoloy alloy926 flat; Incoloy alloy926 bar

BS:NA 25/JIS:SUS 890L/UNS:N08925/W.Nr:1.4529

Monel R-405 alloy (UNS N04405) increases the sulfur content in the Monel 400 composition to enhance the machinability and become a free-cutting Monel alloy. Alloy 405 is an easy-to-machine version of Alloy 400. Alloy 405 adds a certain amount of sulfur, and the sulfide produced has chip breaking effect during machining, so it is suitable for automatic nut machine.
Like Alloy 400, Alloy 405 is resistant to corrosion by seawater, steam, and alkaline solutions at elevated temperatures. Alloy 405 is a solid solution alloy that can only be hardened by cold working. This nickel-based alloy also exhibits good corrosion resistance, weldability and high strength. The alloy exhibits low corrosion rates in fast-flowing brine and seawater environments and is well resistant to stress corrosion cracking in freshwater environments. Good corrosion resistance makes it widely used in marine and non-oxidizing chloride solution environment
American standard designation: UNS N04405, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4674, AMS 7234.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.

We can provide the following the form:Monel alloy405 coil; Monel alloy 405 strip;Monel alloy 405 plate; Monel alloy 405 sheets; Monel alloy 405 tube; Monel alloy 405 pipe;Monel alloy 405 flat; Monel alloy 405 bar

GB:NS111/JIS/UNS:N04405/W.Nr:2.436

This alloy is mainly used for
1. Seamless water pipes and steam pipes in power plants
2. Sea water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude oil distillation
5. The pump shaft and propeller of the equipment used in seawater
6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation
7. Manufacture of pumps and valves used in the production of hydrochloric acid equipment

Inconel 600 alloy is a nickel-chromium-iron-based solid-solution strengthened alloy, which has good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding performance, and has satisfactory thermal strength and high plasticity below 700 �°C
Here is the translation of the previous answer:
The following are the national standard grades and specifications for Inconel 600:
United States standard grade: UNS N06600
Specifications:
AMS 5540: Seamless and welded nickel alloy plate, sheet, and strip with good oxidation and high-temperature creep properties at 800�°F (427�°C).
ASTM B166: Standard specification for nickel-chromium-iron alloys, seamless and welded rod, bar, and wire.
ASME SB-166: Same as above.
European standard grade: NiCr15Fe (2.4816)
Specifications:
EN 10095: Technical delivery conditions for hot rolled and forged stainless steel and heat-resisting steel and hot finished structural hollow sections.
EN 10002-1: Method of tensile testing of metals.
EN 10002-5: Method of compressive testing of metallic materials.
Japanese standard grade: NCF 600
Specifications:
JIS G4902: Standard specification for seamless and welded nickel alloy pipes and tubes.
JIS G4903: Standard specification for seamless and welded nickel alloy pipes and tubes.
Chinese standard grade: GH3600
Specifications:
GB/T 14992: Standard specification for seamless and welded nickel alloy tubes and pipes.
GB/T 14995: Standard specification for nickel alloy forgings.
GB/T 12771: Standard specification for seamless and welded steel pipes for hydraulic transmission.
These specifications define the chemical composition, physical properties, processing, and testing requirements of Inconel 600 materials to ensure their quality and performance meet the standards.

We can provide the following the form:Inconel600 alloy coil; Inconel600 alloy strip;Inconel600 alloy plate; Inconel600 alloy sheets; inconel600 alloy tube; Inconel600 alloy pipe;
Inconel600 alloy flat; Inconel600 alloy bar

GB:00Cr21Ni57Mo8Nb5TiA1;JIS:NCF725:UNS:N07725;W.Nr:2.4668

Used for pipe fittings, joints and bearings in acid-resistant equipment. It is also widely used in marine ship equipment

Inconel 686 is suitable for use in amphoteric acids or amphoteric mixed acids, especially in corrosive environments containing high concentrations of chloride ions in amphoteric mixed acids. It has excellent resistance to uniform corrosion, electrochemical corrosion, localized corrosion and hydrogen embrittlement in seawater, and seawater has little effect on its fatigue strength. Therefore, Inconel686 alloy is an ideal material for marine environment applications, such as fasteners in seawater. The yield strength after cold working strengthening can be as high as 150ksi (1000MPa), and it has the same corrosion resistance as the solid solution state. Inconel 686 alloy is used in corrosive environments such as chemical process, pollution control (flue gas desulfurization), papermaking, pharmaceutical and garbage disposal. Inconel686 welding material is an ideal corrosion-resistant material for surfacing of steel.
Here are the international standard designations and specifications for Inconel 686:
American standard designation: UNS N06686, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B446, ASTM B462, ASTM B564, ASTM B166, ASTM B462, ASTM B472, ASTM B626, ASTM B408, ASTM B473, ASTM B444, ASTM B729, ASTM B677, ASTM B622, ASTM B829, ASTM B366.
German standard designation: W.Nr. 2.4606, Specifications: DIN 17744, DIN 17750, DIN 17752, DIN 17754.
Japanese standard designation: JIS NW686, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: GH686, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012.

We can provide the following the form:Inconel686 alloy coil; Inconel686 alloy strip;Inconel686 alloy plate; Inconel686 alloy sheets; Inconel686 alloy tube; Inconel686 alloy pipe;
Inconel686 alloy flat; Inconel686 alloy bar

DIN:17744;JIS:NW686;UNS:N06686;W.Nr:2.4606

Mainly include chemical treatment, pollution prevention and control, pulp and paper, industrial waste and domestic waste treatment. Chemical processing includes heat exchangers, reactors, evaporators and transfer piping. Air pollution prevention includes chimney linings, pipes, furnace doors, scrubbers, flue gas reheaters, propellers, housings

BST Quartz Co., Ltd. is an outstanding developer and manufacturer of quartz stone slabs and tiles with more than eight-year’s professional experience starting from 2004. Boasting a dedicated team of 150 members devoting to R & D, production, marketing and after-sales service for the quartz stone products and covering an area of 50,000 Sqm, at present we have three sets of fully automatic production lines and another one being under construction which enable us to achieve the production capacity more than 1,000,000 Sqm per year. We have our own fabricating workshop for quartz countertops with perfect workmanship and finishing.
As the pioneer and leader in the industry, we have been exploring and developing the overseas markets ever since the beginning, with 100% of our products been sold to Hong Kong, Australia, Canada, USA, Europe, Korea, Saudi Arabia, Middle East, South America, and so on.

------------------------------------------
Our Advantage
1). Quality Standard: 100% Export Standard and Environmental Friendly.
2). Extremely Qualified Products. 12-Year Warranty.
3). Capability: 3 Production Lines. 1,000,000 SQM per Year.
4). Particular R&D of Quartz Stone. Very Close to Latest International Trend.
5). 100% for Export. Professional & Dedicated Export Services and 24+7 Ready for Communication.
------------------------------------------
We have different sizes and collections available, and customized services are provided.

Ingredient
Natural Quartz 93% - 94% (purified)

Unsaturated polyester resin
4% - 5%

Color and antibiotic substance 2%

Slab Size
3000*1400mm & 3200*1600mm

Thickness
12, 15, 18, 20, 25, 30mm

Cut-to-size
400*400mm, 600*600mm, 800*800mm and other customized sizes

MOQ
150 SQM per Color/Thickness

Lead Time
15 to 30 days depending on the order quantity

Loading Volume (20GP, 21TON)
3000*1400mm/3200*1600mm

We have various colors of quartz stone. Please contact us for more information.

2-in-1 Functionality: Combines a 1.5L 999 blender with a glass jar and a grinder for versatile kitchen use.
Multi-Color Options: Available in Green, Blue, White, Black and Red to match various kitchen aesthetics.
OEM and ODM Support: Customizable design, materials, packaging, and branding for specific needs.

Name 999 1.5L�  juicer blender with� glass juicer jug
Code BL002
Color Green, Blue, Red, White, Black
Power / Voltage 450W, 220V-240V (110V available
MOQ 1,000 pcs (Mixed container available)
Lead Time 20-25 days after deposit
OEM/ODM Custom logo, color injection (White, Black, Red, Green), gift box

Why Choose Greafor 999 Series Juicer Blender?
The Greafor 999 Series is a globally trusted 2-in-1 electric food mixer and juicer blender engineered for high-volume wholesale and retail markets. Backed by Foshan Huijing / Greaforâ??a leading 10+ year manufacturer in Chinaâ??this model combines a robust 450W copper motor, 1.5L durable jar, and 4-speed mechanical control to deliver exceptional performance for global importers and brand owners.
Key Highlights for B2B Importers:
2-in-1 Versatility: Seamlessly functions as a fruit and vegetable juicer blender and an efficient dry grinder.
Flexible Color Options: Available in White, Black, Red, Green, and Blue to match diverse regional market trends.
Mixed Container Support: Lowers your inventory pressure by allowing mixed-color loading in a single 20GP/40HQ shipment.
Strict Quality Control & Certifications: Fully compliant with CE, RoHS, and LFGB standards for global market entry.

Incoloy alloy 945 is a high-strength, corrosion-resistant nickel-iron-chromium alloy. It is primarily composed of nickel, chromium, and iron, with trace amounts of molybdenum, copper, and titanium. This alloy exhibits excellent resistance to stress-corrosion cracking, crevice corrosion, pitting, and intergranular corrosion. It is also highly resistant to hydrogen embrittlement and chloride stress corrosion cracking.
Incoloy alloy 945 has good mechanical properties at both ambient and elevated temperatures. Its high strength and ductility make it ideal for use in high-stress applications, such as gas turbines, chemical processing equipment, and marine applications. This alloy can withstand temperatures up to 1000�°C (1832�°F) and has a high fatigue strength, making it suitable for use in cyclically loaded components.
In addition to its excellent mechanical and corrosion resistance properties, Incoloy alloy 945 is also resistant to oxidation and sulfidation. This makes it well-suited for use in high-temperature environments where exposure to gases and corrosive elements is common.
Overall, Incoloy alloy 945 is a versatile and reliable alloy that is suitable for a wide range of demanding applications in industries such as aerospace, chemical processing, and power generation.
The execution standards for Incoloy alloy 945 by country are as follows:
United States: ASTM B163, ASTM B423, ASTM B829, UNS N09945
Europe: EN 10216-5, EN 10297-2, EN 10222-5, EN 10250-4, EN 10269, EN 10272, EN 10296-2, EN 10297-4, EN 10302, EN 10312
Germany: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17754, W.Nr. 2.4633
United Kingdom: BS 3076

We can provide the following the form:Incoloy alloy945 coil; Incoloy alloy945 strip;Incoloy alloy945 plate; Incoloy alloy945 sheets; Incoloy alloy945 tube; Incoloy alloy945 pipe;Incoloy alloy945 flat; Incoloy alloy945 bar

GBG:H945/JIS/UNS:N09945/W.Nr:2.4669

Incoloy Alloy 945 is typically used in high-temperature applications where resistance to oxidation and creep are required. Some of the typical applications include gas turbine components, heat exchangers, furnace muffles, and petrochemical processing equipment.
Conclusion
Incoloy Alloy 945 is a high-temperature alloy with excellent resistance to oxidation and creep. Its chemical composition and mechanical properties make it suitable for use in high-stress environments at elevated temperatures. Its wide range of applications makes it an important material in the aerospace, petrochemical, and power generation industries.

Haynes 625 is a nickel-chromium-molybdenum alloy with niobium/tantalum added to enhance its corrosion resistance and strength at elevated temperatures. It is one of the most widely used superalloys due to its exceptional mechanical properties, high corrosion resistance, and ease of fabrication.
Haynes 625 has excellent resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-containing environments, making it suitable for use in marine and chemical processing applications. It also exhibits high resistance to oxidation and scaling at elevated temperatures up to 1000â??, making it suitable for use in high-temperature applications such as gas turbines, furnace components, and heat exchangers.
Haynes 625 can be easily fabricated by various methods including welding, forging, and machining. It can be used in both as-welded and annealed conditions. It is available in various forms such as plates, sheets, bars, and tubes, and is widely used in industries such as aerospace, chemical processing, oil and gas, and nuclear power.
US standards: AMS 5599: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; AMS 5666: Specifies the standard specifications for Haynes 625 bars, wire, profiles, and forgings; AMS 5837: Specifies the standard specifications for Haynes 625 seamless or welded tubes; ASME SB 443: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; ASME SB 446: Specifies the standard specifications for Haynes 625 bars and forgings; ASME SB 444: Specifies the standard specifications for Haynes 625 seamless and welded tubes.
European standards: EN 2.4856: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and wire; EN 10216-5: Specifies the standard specifications for Haynes 625 seamless steel tubes.
Japanese standards: JIS NW 625: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and seamless tubes; JIS NW 6692: Specifies the standard specifications for Haynes 625 welded tubes.
Chinese standards: GB/T 14992: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; GB/T 14994: Specifies the standard specifications for Haynes 625 welded seamless steel tubes; GB/T 15008: Specifies the standard specifications for Haynes 625 bars and forgings; GB/T 15010: Specifies the standard specifications for Haynes 625 seamless and welded tubes.

We can provide the following the products:Haynes 625 alloy coil; Haynes 625 alloy strip;Haynes 625 alloy plate; Haynes 625 alloy sheets; Haynes 625 alloy tube; Haynes 625 alloy pipe;Haynes 625 alloy flat; Haynes 625 alloy bar

GB/JIS:G4903/UNS:N06625/W.Nr:2.4856

Incoloy Alloy 902 is a high-strength, heat-resistant, and corrosion-resistant alloy material with excellent mechanical properties and oxidation resistance. It is an iron-based high-temperature alloy composed of elements such as chromium, nickel, molybdenum, copper, aluminum, titanium, and zirconium.
The main features of Incoloy Alloy 902 include:
Corrosion resistance: Incoloy Alloy 902 has strong corrosion resistance and can resist the corrosion of many strong acids, alkalis, and saltwater environments. Therefore, it is widely used in the chemical, marine, and petroleum industries.
Oxidation resistance: Incoloy Alloy 902 has excellent oxidation resistance and can be used for a long time in high-temperature environments without failure. Therefore, it is widely used in equipment and devices operating in high-temperature oxidation environments.
High-strength performance: Incoloy Alloy 902 has extremely high strength and hardness, can withstand high stress and high loads, and is therefore widely used in high-strength fields such as aerospace, nuclear industry, etc.
Good machinability: Incoloy Alloy 902 has good machinability and can be formed and processed by various methods such as hot working and cold working, suitable for the manufacture of products in various shapes and specifications.
In summary, Incoloy Alloy 902 is an excellent high-temperature alloy material with excellent corrosion resistance, oxidation resistance, and high-strength performance. It is widely used in the manufacture of equipment and devices operating in high-temperature, high-pressure, and corrosion-resistant environments.
Incoloy alloy 902 is a nickel-iron-chromium alloy with additions of molybdenum and niobium. Here are some international standards and specifications for this alloy:
American standards: AMS 5221, AMS 5223, AMS 5225, AMS 5226, AMS 5230, AMS 5231, AMS 5542, AMS 5676, AMS 5717, AMS 5718, AMS 5719, AMS 5738, AMS 5801, AMS 5803, AMS 5804, AMS 5806, AMS 5580, ASTM B366, ASTM B408, ASTM B564, ASTM B649, ASTM B670, ASME SB-366, ASME SB-408, ASME SB-564, ASME SB-649, ASME SB-670
European standards: EN 2.4665
German standards: DIN NiCr21Mo14W, DIN 2.4665
British standards: BS HR 202
Japanese standards: JIS NW 4990

We can provide the following the form:Incoloy alloy902 coil; Incoloy alloy902 strip;Incoloy alloy902 plate;Incoloy alloy902 sheets; Incoloy alloy 902 tube; Incoloy alloy 902 pipe;Incoloy alloy 902 flat; Incoloy alloy902 bar

BS: HR 202/JIS:NW 4990/UNS:N09902/W.Nr:2.4665

Custom wine cellar with modular racking system in stainless steel, tailor-made by Foshan Viphonya Stainless Steel Product Co., Ltd. under the ROYAL METAL series. This VIPHONYA custom wine cellar is engineered for restaurants, wine shops, hotels, clubs, villas and professional wine storage projects, letting you build a beautiful, high-capacity wine storage room in your own space.

Specifications:
- Model: RM-CLR-008 (VIPHONYA Custom Wine Cellar ROYAL METAL Modular Racking System)
- Material: SUS304 stainless steel racking, optional wood and glass panels
- Structure: modular racking units, adjustable shelves, columns and cantilever bottle racks
- Finish: champagne gold, black, rose gold or brushed steel
- Lighting: optional LED strip lighting
- Doors: optional glass doors or open display
- Capacity: from 100 up to thousands of bottles, fully project-based
- Custom size, layout and color for every room
- Certification: CE, ROHS
- Packing: export plywood cases, 15-25 days lead time

Features:
- Modular design assembles quickly into any room shape, from home niches to large commercial cellars
- Premium stainless steel structure is rust-free and long-lasting
- Beautiful display look shows off your wine collection
- Fully customizable: size, color, racking layout, lighting and doors
- OEM/ODM accepted, MOQ from 1 unit, factory direct

Company:
Foshan Viphonya Stainless Steel Product Co., Ltd., founded in 2014, runs a 3,800 sqm factory with more than 120 employees and annual capacity of 30,000 units. CE and ROHS certified. Export markets: USA 40%, UK 34%, Europe, Middle East, Southeast Asia.

Incoloy 903 is a high-temperature alloy material, also known as Inconel 903, which is a kind of nickel-based alloy. It is mainly composed of nickel, chromium, iron, cobalt, copper, titanium, aluminum and other elements. It has good high temperature strength, creep resistance and corrosion resistance, and is widely used in aerospace, petrochemical, energy and other industries under high temperature and high pressure environments. and other fields.
Following are some features and applications of Incoloy 903:
characteristic
High temperature strength: It has good strength and rigidity at high temperature, and can withstand stress and load under high temperature and high pressure environment;
Creep resistance: It can be used for a long time without deformation under high temperature and high pressure environment;
Corrosion resistance: good corrosion resistance in strong acid, strong alkali and other corrosive media;
Machinability: Incoloy 903 can be machined, forged and welded through a variety of processing techniques.
The international standards for Incoloy alloy 903 in various countries are as follows:
United States: AMS 5800, AMS 5801, AMS 5802, AMS 5803, AMS 5826, ASTM B166, ASTM B408, UNS N19903
Germany: DIN 17742, DIN 17754, W.Nr. 2.4633
United Kingdom: BS HR 6, BS 3076
Europe: EN 10095

We can provide the following the form:Incoloy alloy903 coil; Incoloy alloy903 strip;Incoloy alloy903 plate; Incoloy alloy903 sheets; Incoloy alloy903 tube; Incoloy alloy903 pipe;Incoloy alloy903 flat; Incoloy alloy903 bar

BS:HR 5/JIS:NW4893/UNS:N19903/W.Nr:2.4665

Incoloy 903 has a wide range of applications, mainly used in the following fields:
Aerospace industry: components such as aero-engines, aero-bearings, gas turbines, etc.;
Petrochemical industry: such as chemical reactors, high pressure vessels, steam generators and other equipment;
Energy industry: such as nuclear reactor components, heat exchangers, coal-fired power plant boilers and other equipment;
Other fields: such as the manufacture of high-temperature valves, heat treatment furnaces, medical equipment, etc.

316L stainless steel is a type of austenitic stainless steel alloy with a low carbon content, making it resistant to sensitization, which is the formation of grain boundary carbides at high temperatures, causing intergranular corrosion. The alloy is commonly used in various industries, including chemical, pharmaceutical, and medical, due to its excellent corrosion resistance and good mechanical properties.
The chemical composition of 316L stainless steel typically includes 16-18% chromium, 10-14% nickel, 2-3% molybdenum, and less than 0.03% carbon. The addition of molybdenum provides increased corrosion resistance to pitting and crevice corrosion, making it suitable for use in aggressive environments.
316L stainless steel is known for its high corrosion resistance to a wide range of chemicals, acids, and alkalis, and is particularly resistant to chlorides, making it an ideal material for use in marine environments. It is also known for its excellent high-temperature strength, which makes it suitable for use in high-temperature applications such as heat exchangers.
In terms of mechanical properties, 316L stainless steel has a minimum tensile strength of 485 MPa (70 ksi), a minimum yield strength of 170 MPa (25 ksi), and a minimum elongation of 40%, making it a strong and ductile material that can be easily formed and welded. Its resistance to high temperatures and thermal expansion make it ideal for use in high-temperature applications.
Overall, 316L stainless steel is a versatile and reliable material that offers excellent corrosion resistance, high-temperature strength, and good mechanical properties, making it suitable for a wide range of industrial applications.
American Standard: ASTM A240/A240M-20a
European Standard: EN 10088-2:2005
Japanese Standard: JIS G4304-2005
Chinese Standard: GB/T 3280-2015
Indian Standard: IS 6911:2017
Here are some of the most common international standards for 316L stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip

We can provide the following form:316L stainless steel coil; 316L stainless stee strip:316L stainless stee plate; 316L stainless steel sheets; 316L stainless steel tubes
316L stainless steel pipe; 316L stainless steel flat; 316L stainless steel bar

YONYAN open flue tankless gas water heaters provide on-demand hot water for household applications. We support overseas brands, importers and distributors with OEM/ODM services and market-specific configurations.

KEY FEATURES

- Instant hot water without a storage tank.
- Natural draft flue exhaust design.
- LPG or natural gas versions, configured for the specified gas type and pressure.
- Capacity, control layout and display options depending on the selected model.
- Customized front panel, logo, packaging and instruction manuals.

CONFIGURATION AND QUALITY SUPPORT

Similar-looking products can differ in heat exchanger construction, burner design, gas valve and ignition system. Our sales and engineering teams help buyers understand these differences and select configurations suitable for their market and budget.

Incoming material inspection, in-process checks and finished-product inspection help maintain consistency between approved samples and production orders. Technical specifications and certification availability are confirmed for each model.

DIRECT FACTORY COMMUNICATION

Established in 2000, YONYAN is an independently operated manufacturer with its own overseas sales team. Buyers work directly with our sales professionals, supported by our in-house engineering, quality and production departments.

INSTALLATION REQUIREMENTS

This open-flued appliance requires a suitable flue system and adequate combustion air. Installation must follow the supplied instructions and applicable local requirements.

INQUIRIES

Contact Tracy Law with your destination market, required capacity, gas type and estimated order quantity for model recommendations and quotations.

347 stainless steel is a stabilized austenitic stainless steel that contains niobium, which helps to prevent intergranular corrosion that can occur during welding and exposure to high temperatures. It is often used in high-temperature applications due to its excellent resistance to oxidation and its ability to withstand high temperatures without losing its strength or corrosion resistance properties.
Some of the key properties of 347 stainless steel include:
High-temperature resistance: 347 can withstand high temperatures up to 870�°C (1600�°F) without losing its strength or corrosion resistance properties, making it ideal for use in high-temperature applications such as furnace parts and exhaust systems.
Corrosion resistance: 347 offers excellent resistance to corrosion, including aqueous corrosion and stress corrosion cracking.
Weldability: 347 is easily weldable using common welding techniques, and the addition of niobium helps to prevent intergranular corrosion that can occur during welding.
Strength and toughness: 347 has good strength and toughness, making it suitable for use in demanding applications.
Some of the common applications for 347 stainless steel include:
High-temperature furnace parts, such as burners and heating elements
Exhaust systems in automobiles, aircraft, and industrial equipment
Chemical processing equipment
Jet engine parts
Heat exchangers
Overall, 347 stainless steel is a highly reliable and versatile material that is well-suited for use in high-temperature applications where superior corrosion resistance and strength are required, and where welding is required.
The following are some of the commonly used international standards for 347 stainless steel:
ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes
EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10095: Heat resisting steels and nickel alloys
JIS G4304: Hot-rolled stainless steel plate, sheet and strip
JIS G4305: Cold-rolled stainless steel plate, sheet and strip
GB/T 4237: Hot rolled stainless steel plate, sheet and strip
GB/T 3280: Cold rolled stainless steel plate, sheet and strip

We can provide the following form:347 stainless steel coil; 347 stainless stee strip;347 stainless stee plate; 347 stainless steel sheets; 347 stainless steel tubes; 347 stainless steel pipe; 347 stainless steel flat; 347 stainless steel bar

Widely used in boiler, power generation, petroleum, chemical, synthetic fiber, food, paper and other industries. Heat exchangers for large boiler superheater tubes, reheater tubes, steam piping and petrochemical.