Find Verified Engineered Flooring Suppliers, Manufacturers and Wholesalers

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 �¢??) and heavy diesel (with a boiling point range of about 350-410 �¢??). Widely used in large vehicles, railway locomotives, and ships.
The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

the Family tent has 16 m2 main floor area, plus two 3.5 m2 vestibules, for a total area of 23 m2, double-fold with ground sheet.

It is the standard tent used by UNHCR/ICRC/IFRC and suitable for a family of5 people, following the recommended minimum living area in hot and temperate climates (3.5 m2 per person), and providing additional space for cold climates.

The technical specifications of this tent were developed by shelter specialists, with close technical cooperation between UNHCR, IFRC and ICRC, to guarantee a product fit for human use in all climates, with appropriate outdoor life span, at a minimum cost.

The technical specifications of this tent are generic, ensuring that the product can be manufactured by different suppliers in various countries, with the common technical know-how and standard equipment from the tent industry.

Engine Gasoline,Honda GX160, /or Diesel, SU178F / or Honda Copy SU168
Type of Combustion Air-cooled,single cylinder,4-stroke
Centrifugal force 20KN
Max.Runing speed 4km/h
Width of the roller 600mm
Operating weight 280kg

General purpose gasoline and diesel engines and engine-powered products. Mainly cover gasoline and diesel engines, generators. water pumps, agricultural Machinery, garden machinery, Construction machinery and forest equipment etc.

In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency.


A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW.



New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.

Engine oil
Nsh ger engine oil regeneration system(used oil purifier, oil treatment, oil recovery, oil processing, oil filtering, oil filtration, oil purification, oil recycling, oil restoration, oil disposal, oil reclamation)
Application
Nsh ger engine oil regeneration system is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. Ger series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, ger can restore the color of used internal-combustion engine oil and remove the scent rapidly.
Advantages of ger
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.

Diesel engine features:
1.Easy and quick start, easy maintenance, low operation cost.
2.Strong Power, the miniaturized fuel injection system/
3.Low fuel consumption, stand up the hard work.
4.High quality spare parts, excellent performance.
5.Process innovation, long service life.
6.Light weight, compact construction.
7.Unique drive system, safe and reliable.

Product model T2.5
Engine type 2 Stroke
Idle speed r/min(Nuetral position) 1100-1200
Displacement (cm3) 61
Bore Stroke(mm) 45.038.0
Maxpower output(KW/r/min) 1.5(2.5) 5000
Gear ratio 2.08(27/13)
Transom height(mm) 417
Fuel tank(L) 1.3
Engine oilcapacity Fuel:oil ratio:30:1
Propeller size(in) 3-7 1/4*5
Packing size(mm) 950*410*275
Engine type,cooling 2-stroke,single cyliner,air cooling
Engine Position Outboard
Ignition system TCI

Engine type Air-cooled single-cylinder 4-stroke
Displacement 163� ml
Max Output 4.0 HP/3600 rpm
Fule Tank Capacity 3.6 L
Ignition System Non-contact transistirzed ignition(TCI)
Starting System Recoil and� hand-operated
Fule Consumption 350 g/kw.h
Oil Capacity 0.6 L
Dry Weight 15 kg
Dimension 312x362x335� mm

Type: single cylinder; balance shaft, 4 strock, air-cooled, vertical, ohv
Displacement : 229
Compression ration: 9.2 : 1
Max power & ratating speed : 11.5/(6500+-500)
Min fule < 354
Ignition: cdi
Transmission : 5 speed
Clutch: manual coil clutch
Starter: electric and kick

Motorcycle Engine,
Displacement: 110cc, 125cc, 150cc, 200cc, 250cc
Air cooled and water cooled available
4 stroke
OEM quality
Trade Terms: FOB Chongqing
Payment Terms: T/T, L/C
Delivery Time: Within 30 days by order quantity.

Box & Bag or as your specific request.

Model: 162FMJ (CG150)
Model: Single cylinder, 4-stroke
Air-cool
Displacement(ml): 149.4
Ignition: C.D.I
Compression ratio: 10.3:1
Net weight(kg): 33
Starting: Kick / electric
Max. power(kw/r/min): 9.6/8500
Max. torque (N.m/rpm): 11.3/7500
Bore and stroke (mm): 62 * 49.5
Dimension (mm): 354 * 324 * 435
Clutch type: manual
Gearshift: 4-speed / 5-speed / non cycle
Lubrication: combined force-feed and droplet
Min.fuel consumption: <=354g/kw.h
Adaptable motorcycle mode: street vehicle, dirt bike, all-terrain vehicle(ATV)

Case with inner plastic bag

Model: 1P52FMH (Z110)
Model: Single cylinder, 4-stroke
Air-cool, horizontal
Displacement(ml): 107
Ignition: C.D.I
Compression ratio: 9.0:1
Net weight(kg): 20
Starting: Kick / electric
Max. power(kw/r/min): 6.2/7500
Max. torque (N.m/rpm): 8.6/5500
Bore and stroke (mm): 52.4 * 49.5
Dimension (mm): 445 * 330 * 280
Clutch type: single automatic
Gearshift: 4-speed
Lubrication: combined force-feed and droplet
Min.fuel consumption: <=367g/kw.h
Adaptable motorcycle mode: street vehicle, CUB

Case with inner plastic bag

Model: 156FMI (CG125)
Model: Single cylinder, 4-stroke
Air-cool
Displacement(ml): 124
Ignition: C.D.I
Compression ratio: 9.0:1
Net weight(kg): 32
Starting: Kick / electric
Max. power(kw/r/min): 8.9/9000
Max. torque (N.m/rpm): 10.5/7500
Bore and stroke (mm): 56.5 * 49.5
Dimension (mm): 354 * 324 * 435
Clutch type: manual
Gearshift: 4-speed / 5-speed / non cycle
Lubrication: combined force-feed and droplet
Min.fuel consumption: <=354g/kw.h
Adaptable motorcycle mode: street vehicle, dirt bike, all-terrain vehicle(ATV)

Case with inner plastic bag

Type Single cylinder,Four-stroke, Air cooled
Bore Stroke (mm) 78-62
Displacement(ml) 296
Comprehension Ratio 19:1
Max. Power & Rotating Speed:KW/(r/min) : 4.4 KW/3,600 rpm
Rated Power & Rotating Speed:KW/(r/min): 4.0 KW/3000 rpm
Max.Torque &Rotating Speed N.m/(r/min): 13.6 N.m/2500 rpm
Ignition: Compression
Start Mode Manual
Air Filter Semiarid
Fuel Tank (L) 3.5
Fuel Consumption (g/kWh) 280
Engine Fuel Tank(L) 1.1
Package Size (mm) 397 440 443
Net Weight(kg) 32
Gross Weight(kg) 33
20/40GP/40HQ: 240/480/600

Features:
1.Easy and quick start, easy maintenance, low operation cost.
2.Strong Power, the miniaturized fuel injection system.
3.Low fuel consumption, stand up the hard work.
4.High quality spare parts, excellent performance.
5.Process innovation, long service life.
6.Light weight, compact construction.
7.Unique drive system, safe and reliable.

Engine oil purifier

LYE series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.


wooden case

This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.

1. High precision stainless steel net is used as purifying material which is corrosion-proof, high temperature resistant and has a good mechanical strength with longer life time, capable of removing oils' tiny impurity in more depth.
2. High accurate and effective removal of water content in oil, as well as rest of harmful gas.
3. Capable of recovering the clarity of engine oil back to the clarity of new oil.
4. This purifier adopts both manual and auto disposal of residue, which operates fast, stably, reliably and safely.
5. Strong condensation technology is applied to the drawn out mixed gas which increases effective output and extend life time of vacuum pump.
6. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met.
7. Imported parts are used for all electric system which ensures operation of the equipment with high performance.
Item unit zly
Flow rate kg/d 8000
Working pressure mpa -0.095~0.4
Temp. Control range centi 80 centigrade~180centi
Working noise db(a) f_80
Heating power kw 72 kw
Inlet/outlet pipe diameter mm 42
Overall size mm 3850*2250*2320
3500*1750*1850
3500*1750*1850

Efficiency of air intake, exhaust and power output improved with 25 degrees valve angle
Improved heat sink and air flow with higher power and longer working life
Modified combustion chamber for full combustion, power improving and lower fuel consumption
Cast iron cylinder liner
Automatic compression release
Automatic low oil engine shutdown system
EPA emission certified

New rocker arm for higher stability and longer working life
·Lock-style valve with longer working life
Efficiency of air intake, exhaust and power output improved with 25 degrees valve angle
Improved heat sink and air flow with higher power and longer working life
Modified combustion chamber for full combustion, power improving and lower fuel consumption
Cast iron cylinder liner
Automatic compression release
Automatic low oil engine shutdown system
EPA emission certified

Contact person: ms. Ivy gan
High-tech auto parts trading co., ltd.
Skype: ivygangan
Phone: 0086 13752813583

612600050027
612600040114
61500050032
6150060069
61500060568
612100090162
61500010334
614090067
612600090087
612600110162
61500050025
61500010105
61500010100
612600030053
61200040362
61200080611
61200080618
612600190113
61260030005
612600190351
612600180142
612600080674
612630080038
612600061654
612600080633
612600081583
612600090188
612600061491
612600100172
612600080852
612600090374
612600081313
612600080835
612600082198
612630080231
612600061256
612600061279
612600061290
612600060568
612600061332
612630060003
61500060226
61500090195
61500010334
612600090210
612600090208
612600090561
61260090562
612630080205
612630080011
612601080398
612601080457
612601080175
612601080377
612601080380
612601080376
612601080384
612601080379
612601080386
612600090771
612600010465
61260012598
612600130172
612600130267
612600130476
612600130140
612600090168
612600090749
612630080175

Cartons, wooden cases

2-stroke, 2 cylinders.


1160x740x380mm, 41kgs

Application:
LYE series engine oil purifier is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.

Features:
1. Fine precision filtering material, with excellent mechanical strength and long service life, which is anti-erosion and anti-hi-temperature, with high performance of removing fine particles in the contaminated oil.
2. Completely removing water content and harmful gases from the contaminated oil.
3. Manually/automatically removing residual impurities from the machine, which is easy to operate and on the safe side.
4. The mixture of gases drawn out via vacuum system is condensed and dewatered by forced air, which improves the effective output power of the machine and prolongs the service life of vacuum pump.
5. After treating, the oil color looks like the new.

Advantage:
This machine can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Regenerate the used hydraulic oil, lubricating oil, coolant oil, machine oil and so on.

OHV, 212cc engine
Horizontal shaft
Recoil/Electric start
New designed fuel tank, recoil starter, muffler, air filter
New optimized ignition system and improved spark plug, guarantee one time start
New designed combustion chamber, intake and exhaust valve, and fine tuned carburetor make good gas mixture and combustion
Ideal for different applications: generator, pump, mini tiller, high pressure washer etc.

advanced technology, arm with no rotation, complete machine

Non-outrigger design could pass across obstacles like machine tool to catch material and lift, widely used in more areas;

Standing operation, operator moves with machine, easier and convenient; Arm extend and return electrically at 600mm, easy and simple to catch and lift material;

American Curtis electric controller, continuously variable driving speed, 24v battery power, recharge battery in night, crane could work for 5-8hours in day time;

Electric trolley crane could be used to lift device, emergency, machine lifting and rescue.

Lye series oil filter machine can treat with regeneration of waste gas engine oil. It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas engine oil, bitumen and colloid and other sludge can be removed similarly. After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too so as to resume the performance of gas engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

V. Features

1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating ac contract and prolong the service life of ac contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vaccum level, ultra-pressure etc.

Engine oil regeneration system
Application
NSH GER engine oil regeneration System is particularly suitable to regenerate internal-combustion engine oil including diesel engine oil, gasoline engine oil and internal-combustion engine oils. GER series can effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the oil. Specially, GER can restore the color of used internal-combustion engine oil and remove the scent rapidly.

Advantages of GER
Design according to different customers needs.
Purify blended oils.
Low operation cost.
Low maintenance and replacement expenses.
High regeneration rate.
Automatic reverse washing system will extend the lifetime and improve the performance of the filters.
High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely.
Small size, light weight and low noise.
EV Explosion-proof Vacuum Purifier
EV-A Explosion-proof Vacuum Purifier
EP Explosion-proof Precision Filtering Purifier
EP-A Explosion-proof Precision Filtering Purifier
De-impurity series
PF Precision Purifier
PF-A Precision Automation Purifier
Spare parts
Filters
PVC steel wire reinforce hose

GER series used oil recycling machine can recycle kinds of used engine oils including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. It has such main characteristics and advantages:
1.Two main filtering systems can ensure the GER to work continuously by batch.
2.GER machine can install the equipment to remove the bad smell of treated oil, thus it's a machine which is good for the environment protection.
3.GER can install special equipment to treat discharging gas well.
4.GER can purify the mixed used oil, but the output quantity and quality is influenced by the composition and quality of used oil
5.Low investment and high gaining. Comparing with other kind of used oil recycling machine, buyer invests less and get not less gaining. One used oil recycling machine is just equivalent to a small oil mill.

Product characteristics:
1.Superlubrication
Lift engine power more than 12%!
The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%.
2.The ultimate wear resistance
Save fuel up to 15%!
The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%.
3.Shock absorption and noise reduction
Effectively reduce noise by more than 6%!
The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced.
4.Deep repair
Effectively repair engine wear, prolong engine life by 2 times!
Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times.
5.Cleaning and energy saving
Remove more than 85% of oil mud carbon, reduce the number of engine cleaning!
The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost.
6.Extension period
Extend the oil exchange cycle by more than double.
Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice.
7.Green environmental protection
CO (carbon monoxide) emissions decreased by 90% .
The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

LYE series is designed for recycling kinds of engine oil used in ships, cars and other vehicles. It not only can remove the carbon particles, deep oxides, etc., but also can filter off the harmful matters such as colloid, bitumen. After treated by the machines, the oil color looks like the new and the quality indexes are improved also, so as to resume the performance of engine oil, keep the engine being lubricated, guarantee lubricating system of engine to work properly and prolong service life of engine oil.


Wooden case

The generator powered by Honda Yamaha Robin engines.

Steel Marine Skylights for Engine Room are made in by and available with pneumatic skylights, electric skylight, hydraulic skylights and mechanical transmission skylights.

They comply with CB3038-1978 standards with major IACS approvals like ABS, BV, CCS, DNV-GL, KR,LR, RINA, NK,RMRS.

Main feather:
Light and small size
Powerful and efficient engine but low fuel consumption
Easy to operate and high safty
Low noise emissions

Engine oil regeneration system is mainly for regenerating the waste engine oil.

DIESEL GENERATOR 2.5KW/3.4HP AIR-COOLED SINGLE CYLINDER SMALL DIESEL ENGINE FOR SALE



Condition: New
Usage: generator,boat,vehicle,pump,welding, generator,boat,vehicle,welding,pump
Fuel: Diesel
Stroke: 4 Stroke
Cylinder: Single Cylinder
Cold Style: Air-cooled
Start: Electric Start
Place of Origin: Chongqing, China (Mainland)
Brand Name: Yangke
Model Number: YK170F/FE
Dimension(L*W*H): 335*380*415mm
Weight: 27~31kg
Certification: CE,ISO9001:2008,TS16949
Warranty: 1 Year/1000 hours After-sales
Service Provided: Overseas third-party support available
Bore&Stroke: 70x55mm
Starting System: F:manual FE:electric
Advantages: high quality,low noise,low consumption,widely used
Fuel Type: Diesel:0#(summer),-10#(winter)
Oil Brand: SAE10W30(CD grade or above)
Net Weight: 27~31kg
Package Dimension: 335x380x415
Packaging & Delivery

Packaging Details: bubble film,naked packing with plastic wrap,wooden case or as demands.
Delivery Detail: within 7 days after deposit confirmed

Basic Info
Model NO.: FD170F
The Valve Solved Carbon Deposition: Effectively Prolong The Lifespan of Engine
Easy Start, Easy Maintenance: Effectively Reduce The Heating and Noise
Ohv Design, Lower Temperature: More Power Output, More Endurable
Low Oil Shut Down System: Low Oil Alert System to Protect Engine
Speed: Speed
Ignition Mode: Electric Ignition
Cooling Cylinder: Air-Cooled
Cylinder Arrangement Form: L
Specification: CE, RoHs, SASO, SONCAP, EPA, CARB
HS Code: 84079090
Fuel: Gasoline Engine
Integrated Type of Wind Scooper: Compact New Structure, Light Weight
Completely New Design of Crankcase: Lower Spray Volume of Oil, Less Fuel Consumption
Cast Iron Sleeve: Improved The Performance of Lubrication
Intake Pressure Impulse: Naturally Aspirated
Piston Movement: Reciprocating
Number of Cylinders: Single-Cylinder Machine
Number of Strokes: Four-Stroke
Trademark: Fusinda
Origin: Chongqing, China
Product Description

FUSINDA 7HP / 208cc Air-Cooled Honda Style Small Gasoline Engine

Product Description
Fusinda brand, Air Cooled, FD170F / 208cc, single cylinder gasoline engine

Features:
* Advance OHV, air cooled, 4 stroke engine, delivers non-flunctuating power for longer time
* Light and compact design
* Low fuel consumption
* Easy and fast starting and installing
* Lower noise and small vibration
* The valve designed for carbon deposition prevention, which can effectively prolong the lifespan of engine

* Integrated type of wind scooper, effectively reduce the heating, better prolong the engine's lifespan

* Optimum inner structural design of cylinder head valve, effectively lower spray volume of oil, less fuel consumption

* OHV design, lower temperature with running engine, more power output, more endurable, can save more fuel

* Cast Iron Sleeve, effective improved the performance of lubrication, as well as make the engine to better stand wear and tear, to prolong the engine's lifespan

* Low oil shut down system, prevent engine to run in low oil condition, better protect engine

Lye series oil refinery machine is special for treating engine/car/ship/black oil, you could get clean and refreshed engine oil after treated by this machine.


If this is not your needing type, follow is our catalogue for you to choose:
Series zy single-stage vacuum transformer oil purifier
Series zyd double high vacuum transformer oil purifier
Series zyb multiply-function insulating oil treatment machine
Series ty turbine oil purification apparatus
Series tya lubricating oil/ hydraulic oil purification unit
Series lye engine oil recycling machine
Series bod black dirty oil regeneration equipment
Series dod diesel oil regeneration equipment
Series tyb portable light fuel oil purification machine
Series ly plate pressure oil purifier
Series tyd vacuum dehydrator
Series jl portable oil filtering and oiling machine
Series iij oil tester (bdv tester)

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ168F (Recoil)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreÃ?Stroke (mm): 68X54
Displacement(cc): 196
Compression ratio: 22:01
Rated power/ Rated speed (Hp/r/min): 3.0/3000 3.3/3600
Max power/ Max speed (Hp/r/min): 3.3/3000 3.6/3600
Lubricating system: Pressure splashed
Starting system: Recoil starter/
Rotation direction(face to the output axle): Anticlockwise
Fuel type: 0#ã?�-10#ã?�-20# diesel
Fuel tank capacity (L)/(us.gal): 2.5/0.66
Fuel consumption/related rotation speed (g/hp.h/r/min): 315/3000 320/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal): 0.7/0.184
Starting motor capacity (V�kW): 12V   0.8kW
Charging generator capacity (V�A): 12V   3A
Battery capacity (Vã?�Ah): Above 12V 20Ah
Package dimensionL�W�Hmm: 313X380X335
Net weight(kg): 20kg

Single-cylinder,vertical,air-cooled,4-stroke,direct injection diesel engines
Model No: SJ170F (Recoil starter)
Type : Single-cylinder,vertical,air-cooled,4-stroke,direct injection
BoreStroke (mm): 7055
Displacement(cc): 211
Compression ratio: 21:01
Rated power/ Rated speed (Hp/r/min): 3.4/3000             3.8/3600
Max power/ Max speed (Hp/r/min): 3.8/3000             4.2/3600
Lubricating system : Pressure splashed
Starting system: Recoil starter
Rotation direction(face to the output axle): Anticlockwise
Fuel type:0#�-10#�-20# diesel
Fuel tank capacity (L)/(us.gal):2.5/0.66
Fuel consumption/related rotation speed:(g/hp.h/r/min) 209/3000            218/3600
Lube oil type: CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) :0.75/0.20
Starting motor capacity (V�kW): 12V 0.8kW
Charging generator capacity (V�A): 12V 3A
Battery capacity (V�Ah): Above 12V 20Ah
Package dimensionï¼?LWHï¼?mm: 430X370X465
Net weight(kg)¤27

Single-cylinder,ertical,air-cooled,4-stroke,direct injection diesel engines
Model No SJ178F (Recoil starter)
Type Single-cylinder,ertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 78 62
Displacement(cc) 296
Compression ratio 21:01
Rated power/ Rated speed (Hp/r/min) 5.0/3000 5.5/3600
Max power/ Max speed (Hp/r/min) 5.5/3000 6.0/3600
Lubricating system Pressure splashed
Starting system Recoil starter
Rotation direction(face to the output axle) Anticlockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 3.5/0.92
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40
Lube oil capacity (L)/(us.gal) 1.1/0.29
Starting motor capacity ( �kW) 12 0.8kW
Charging generator capacity ( �A) 12 3A
Battery capacity ( �Ah) Aboe 12 20Ah
Package dimensionï¼?L W Hï¼?mm 480X450X525
Net weight(kg)¤33

Model No SJ186FE (Electric starter)
Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 86 70
Displacement(cc) 406
Compression ratio 19:01
Rated power/ Rated speed (Hp/r/min) 7.7/3000 8.60/3600
Max power/ Max speed (Hp/r/min) 8.6/3000 10.0/3600
Lubricating system Pressure splashed
Starting system Electric starter
Rotation direction(face to the output axle) Clockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 5.5/1.45
Fuel consumption/related rotation speed (g/hp.h/r/min) 206/3000 215/3600
Lube oil type CD grade or SAE 10W-30, 15W-40,40CC
Lube oil capacity (L)/(us.gal) 1.65/0.44
Starting motor capacity (V �kW) 12V 0.8kW
Charging generator capacity (V �A) 12V 3A
Battery capacity (V �Ah) Above 12V 20Ah
Package dimensionL W Hmm 525X470X565
Net weight(kg)¤51.5

Model No SJ188FE (Electric starter+Battery)
Type Single-cylinder,vertical,air-cooled,4-stroke,direct injection
Bore Stroke (mm) 88X86
Displacement(cc) 523
Compression ratio 19:01
Rated power/ Rated speed (Hp/r/min) 8.9/3000 10.0/3600
Max power/ Max speed (Hp/r/min) 10.0/3000 12.0/3600
Lubricating system Pressure splashed
Starting system Electric starter
Rotation direction(face to the output axle) Clockwise
Fuel type 0# �-10# �-20# diesel
Fuel tank capacity (L)/(us.gal) 5.5/1.45
Fuel consumption/related rotation speed (g/hp.h/r/min) 272/3000 280/3600
Lube oil type CD grade or SAE 10W-30, 15W-40,40CC
Lube oil capacity (L)/(us.gal) 1.65/0.44
Starting motor capacity (V �kW) 12V 0.8kW
Charging generator capacity (V �A) 12V 3A
Battery capacity (V �Ah) Above 12V 20Ah
Package dimension L W H mm 525X470X585
Net weight(kg) 53

We supply spare parts for diesel engine
Replacement parts for perkins, cumminse

LYE used engine oil regeneration system is particularly used in such industry as mines, metallurgy, electric power, transportation, mechanical manufacture in which lubrication oil like hydraulic oil, engine oil, cooling oil etc are used. Gas engine oil used in the field of transportation like shipping, land-carriage etc. Also can be treated with regeneration by LYE series machines.

LYE series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil from car, motor, truck, ship, mines, electrical power and so on.

It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly.

After treatment by the machines, the color of the treated oil is recovered and the quality indexes are improved too, so as to resume the performance of gas or diesel engine oil, to keep the engine in good lubricating conditions, to guarantee lubricating system of gas or diesel engine to work properly and to prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

Features
1. Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.
2. Completely removing water and harmful gas from the waste oil.
3. Recovering the color of the treated oil as fresh oil
4. Simple operation, safe and reliable.
5. As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.
6. This system adopts advanced indefinite oil temperature control device, which can set the top and bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the service life of AC contract.
7. This plant is equipped with integrated protection devices. Through each executive component, it can realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.

Our Main Products:
Series ZY Single-Stage Vacuum Transformer Oil Purifier
Series ZYD Double High Vacuum Transformer Oil Purifier
Series ZYB Multiply-Function insulating oil treatment machine
Series TY Turbine Oil Purification Apparatus
Series TYA Lubricating oil/ hydraulic oil purification unit
Series LYE Engine oil recycling system
Series TYB Portable light Fuel oil purification machine
Series PL Plate pressure oil purifier
Series TYD Vacuum dehydrator
Series EFD Explosion protection filtration machine
Series JL Portable oil filtering and oiling machine
Series IIJ Oil Tester (BDV Tester) .