Find Verified Boats Vessels Suppliers, Manufacturers and Wholesalers

Egyptian rock phosphate loose in Bulk vessel

Scrap Vessels:

Scrap Vessels sales in Nigeria,Kindly contact us for details.

WE have many Scrap Ship in Egypt and UAE and also Scrap Steel, looking for genuine buyer, prefer buyer from Egypt and UAE.

Size
newborn
0-3 m
3-6 m
6-9 m
9-12 m
12-18 m

Padded, size: newborn, 0-3 m, 3-6 m footed

size: 6-9 m , 9-12 m, 12-18 m footless

Size
newborn
0-3 m
3-6 m
6-9 m
9-12 m
12-18 m

Padded, size: newborn, 0-3 m, 3-6 m footed

size: 6-9 m , 9-12 m, 12-18 m footless

2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor
30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.

A vessel transport is a boat or ship that transports crude oil/ or any other form of oil from one country to the other.

We supply/transport vessel from Nigeria to any part of the world.

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless.

Taste: Practically Tasteless.

Molecular Weight: 76.1g/mole

Boiling Point: 188C (370.4F)

Melting Point: -59C (-74.2F)

Specific Gravity: 1.036 (Water = 1)

Vapor Pressure:0 kPa (@ 20C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C

Vapor Density: 2.62 (Air = 1)

Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9

Dispersion Properties: See solubility in water, acetone

Application:
Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent.

D6 Virgin Fuel Oil (often called D6 Virgin Oil, D6 Fuel Oil, or Residual Fuel Oil D6) is a heavy residual fuel obtained directly from the refining process and has not been previously used or reprocessed.

D6 virgin fuel = Bunker C, or Navy Special Fuel Oil.

It's the heavy, bottom-of-the-barrel fuel left after gasoline, diesel, jet fuel, etc. are distilled out of crude oil. Virgin just means it's straight from the refinery, not recycled/blended waste oil.

KEY SPECS:

Type: Heavy, high-viscosity residual fuel oil
Grade: Category 6 fuel oil - thickest grade
Viscosity: 650-900 cst @ 50C - like tar at room temp
Color: Black, dense
Energy: ~150,000 BTU/gallon - very high energy density
Sulfur: High, typically <3.5%. Low-sulfur versions exist but cost more
Flash point: Min 60C

Key Characteristics.
Fuel Type: Residual Fuel Oil
Appearance: Dark brown to black
Viscosity: Very high
Density: Higher than diesel
Heating Requirement: Usually required
Main Use: Industrial and marine fuel

D6 is a heavy fuel oil (HFO) primarily used for:
Power plants
Marine vessels (where regulations permit)
Large industrial boilers
Heavy industrial furnaces

1. Power plants - Boilers & turbines for electricity, often backup fuel
2. Large ships - Ocean tankers, bulk carriers, container ships as bunker fuel
3. Industrial - Cement plants, steel mills, big boilers/furnaces for process heat
4. Large generators - Backup power for factories/grid.

*Important: Special handling needed*
D6 is so thick/viscous it must be *pre-heated to 104-127C* before it can be pumped or burned. You need special storage tanks, heaters, and burners.

*Not for cars, small boats, or normal diesel engines*. It will destroy them. D2 diesel is much lighter and for trucks/cars - D6 is only for massive engines designed for it.

Cost vs Environment:
- Pros: Cheap per energy unit, high BTU, cost-effective for bulk use
- Cons: One of the most polluting fuels due to high sulfur + impurities SO2, acid rain. Regulations now require desulfurization.

D6 vs D2 diesel: D2 = light distillate for cars/trucks. D6 = heavy residual for ships/power plants. D6 has way more energy but also way more pollution and handling complexity.

It is much thicker and heavier than diesel or Jet A-1 and usually requires heating before it can be pumped or burned.

Benefits of Potatoes:
A rich source of energy and calories.
Support bone health with essential nutrients like iron, calcium, and phosphorus.
Promote heart health with fiber, potassium, and Vitamin C.
Help reduce cancer risk thanks to folate, which supports DNA repair.
Regulate blood pressure by relaxing blood vessels through potassium content.
Storage Tips:
Store in a cool, dry, and dark place (below 10C).
Avoid sunlight exposure to prevent toxic solanine formation.
Do not refrigerate to avoid starch turning into sugar and bad odor.
Keep potatoes away from onions during storage.

Benefits of Potatoes: A rich source of energy and calories. Support bone health with essential nutrients like iron, calcium, and phosphorus. Promote heart health with fiber, potassium, and Vitamin C. Help reduce cancer risk thanks to folate, which supports DNA repair. Regulate blood pressure by relaxing blood vessels through potassium content. Storage Tips: Store in a cool, dry, and dark place (below 10C). Avoid sunlight exposure to prevent toxic solanine formation. Do not refrigerate to avoid starch turning into sugar and bad odor. Keep potatoes away from onions during storage.

Physical state and appearance: Colorless clear Liquid. (Oily liquid.) Practically Odorless.
Taste: Practically Tasteless.
Molecular Weight: 76.1g/mole
Boiling Point: 188°C (370.4°F)
Melting Point: -59°C (-74.2°F)
Specific Gravity: 1.036 (Water = 1)
Vapor Pressure:0 kPa (@ 20°C) 0.08 mmHg at 20 C 0.129 mmHg at 25 C
Vapor Density: 2.62 (Air = 1)
Water/Oil Dist. Coeff.: The product is more soluble in water; log(oil/water) = -0.9
Dispersion Properties: See solubility in water, acetone

Application:
Its most important end use is in the production of unsaturated polyester resins that, in turn, go into items that effect our daily lives, like water tanks, or our leisure time, like sailing boats. It can also be used as plasticizer, surface active agent, emulsifying agent and demulsifying agent, mould inhibitor, antiseptic for fruit, ice inhibitor and moisture preserving agent for tobacco.

Packaging Details
Mono Propylene Glycol MPG CAS: 57-55-6
Iron drums, 215kg/drum, 17.2 MT/20GP
Flexitank: 22-23MT/ flexitank cost little

Sugar beet pellets are a popular type of animal feed made from sugar beet pulp, a byproduct of the sugar extraction process. Sugar beets are harvested for their sugar content, and the leftover pulp is often dried and processed into pellets for use as animal feed. These pellets are especially useful for livestock, such as cattle, sheep, and horses, but they can also be used for other animals, including poultry.
Sugar beet pulp is a fibrous material left after sugar has been extracted from sugar beets. It contains high levels of fiber, sugars, and minerals, making it an excellent energy and roughage source for animals. When processed into pellets, the material becomes more compact and easier to handle, transport, and store.
Shipping
When it comes to shipping, the method depends on the destination and the size of the order.
Containerized Shipping: For most international shipments, Sugarbeet Pulp Pellets are loaded into standard shipping containers. These containers are usually 20-foot or 40-foot containers.
Bulk Shipping: For larger quantities, bulk carriers or specialized vessels for dry bulk cargo are used.

Phosphoric acid is in Colorless, transparent and syrupy liquid or rhombic crystalline; Phosphoric acid is odorless and tastes very sour; its melting point is 42.35 C and when heated to 300 C Phosphoric acid will become into meta Phosphoric Acid; its relative density is 1.834 g/cm3; phosphoric acid is easily soluble in water and resolves in ethanol; Phosphoric acid may irritate human skin to cause phlogosis and destroy the issue of human body;Phosphoric acid shows corrosiveness being heated in ceramic vessels; Phosphoric acid has got hydroscopicity.

Application
1,Phosphoric acid is used in production of phosphate industry, electroplating and chemical polishing processes, activated carbon treatment agent in industrial field, as well as cleaning agent, enhancer acidulant, nutrient of yeast, produce food grade
phosphates in food industry.
2,It can be used as sour agent and nutritional agent of yeast. It can be used as sour agent for sauce, can and soft drinks. Used in the yeast Saccharomyces source of keeping nutrition and prevent bacteria breeding in vintage industry.
3,Used food acidulant; yeast nutrient; in manufacturing phosphate salts.

Chicken Paw Grade A
We offer accurate services, specified quality, clean packaging with delivery on time. - Factory produce, clean packaging, caution loading of goods into the transportation vessel, save transportation of goods to the shipping site.
Our whole frozen chicken are specially hand Slaughtered accordingly to Islamic (HALAL) and international requirements.

Chicken Feet AAA grade

Out yellow skin removed
No bad smell
No Amonia burns
No black flaw
No blood clots
No bruise
Almost no broken bones (max 2%)

HYGIENIC PRODUCT
NO BROKEN BONES
NO BAD SMELL
NO AMMONIA BURN
NO BLACK PADS
NO YELLOW SKIN
FEATHER OFF
QUALITY: AA GRADE
WEIGHT: 40 GRAM ABOVE
PACKING: 20 KG CARTON
SHIPMENT: IMMEDIATELY

Chicken Paw Grade A
We offer accurate services, specified quality, clean packaging with delivery on time. - Factory produce, clean packaging, caution loading of goods into the transportation vessel, save transportation of goods to the shipping site.
Our whole frozen chicken are specially hand Slaughtered accordingly to Islamic (HALAL) and international requirements.

Chicken Feet AAA grade

Out yellow skin removed
No bad smell
No Amonia burns
No black flaw
No blood clots
No bruise
Almost no broken bones (max 2%)

HYGIENIC PRODUCT
NO BROKEN BONES
NO BAD SMELL
NO AMMONIA BURN
NO BLACK PADS
NO YELLOW SKIN
FEATHER OFF
QUALITY: AA GRADE
WEIGHT: 40 GRAM ABOVE
PACKING: 20 KG CARTON
SHIPMENT: IMMEDIATELY

BAMBOO of any size and diameter, for decoration or nurseries. Treated before shipping to avoid any degradation. Shipping from Tamatave and by boat.

Product Description :
BLCO contain 17 product iterms

Price of product ( USD price or FOB price) :
FOB USD 13/4, CIF USD10/4, per barrel.

Product origin :
Nigeria

Key Specifications/Special Features :
NNPC STANDARD NNPC TECHNICAL SPECIFICATIONS:
SPECIFIC GRAVITY: 0.8398
API AT 60 DEG. F: Min 34.00 5% (ASTM D-1298)
WATER CONTENT BY DISTILLATION: 0.2% (ASTM D-4006)
POUR POINT DEGREES F: BELOW 40 (ASTM D-97)
SULFUR WEIGHT %: 0.14 (ASTM D-139)
SALT CONTENT PARTS PER BILLION: 3.0 (ASTM D-526)
REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529)
KINEMATIC VISCOSITY @ 30 DEG. C: 2.2 (ASTM D-523)
DISTILLATION INITIAL BOILING POINT (IBP): 35 DEG. C (ASTM D-86)
DISTILL TO 75 DEG. C VOL.%: 7.0
DISTILL TO 175 DEG. C VOL.%: 35.5
DISTILL TO 250 DEG. C VOL.%: 51.5
DISTILL TO 300 DEG. C VOL%: 60.5
COLOUR Dark Brown

Minimum Order Size and Packgaing details :
2 Million, 4 Million and 10 Million Barrel, Minimum 2 Million barrel Vessel per month.

Organic yellow corn is a valuable component in animal feed, particularly for livestock such as cattle, poultry, and swine. Its nutritional profile and digestibility make it a preferred choice for many farmers. When exporting organic yellow corn from the USA, several steps ensure the product maintains its quality and complies with international standards.
Organic yellow corn is rich in:

Carbohydrates: Provides a high-energy source for animals.

Protein: Contains moderate levels of protein, essential for growth and reproduction.

Fiber: Aids in digestion and promotes gut health.

Vitamins and Minerals: Supplies essential nutrients like B-vitamins and minerals

Its digestibility and energy content make it suitable for various livestock, supporting optimal growth and production.
The packaging of organic yellow corn for export is crucial to maintain its quality and ensure compliance with international standards:

Bulk Packaging: Large quantities are often packed in bulk containers or silos, suitable for large-scale shipments.

Bagged Packaging: Smaller quantities are packed in bags, typically ranging from 25 kg to 50 kg, using materials like woven polypropylene (PP) bags.

Super Sacks: For very large quantities, super sacks (also known as bulk bags) can hold up to 1,000 kg of corn.

Yellow Corn - Organic - C&F per M Ton - US$ 200
Types Available are Identity Preserved, Non GMO, Organic
Transportation - Container Loads / Bulk Vessel / Barge

Boat

Standard

Product Description
Egyptian Gypsum Raw is one of the best purities in the world

Price of product ( USD price or FOB price) :
USD 28 - 35 USD per MT in Container
USD 17 - 21 USD IN bulk vessels"
CIF prices are subject to date and availability of equipment and vessels

Product origin :
EGYPT

Key Specifications/Special Features :
CaSo4 2H2O: 97.43%
So3: 45.38%
Cao: 31.7%
L.O.I: 22.05%
Whiteness: >92%

Minimum Order Size and Packgaing details :
MOQ: 10 containers (270MT) as a trial order free in containers or jumbo bags
10000 MT in bulk vessels

ES EA2 is a copper-coated, molybdenum-alloyed wire for the submerged arc welding of non-alloyed and low-alloyed steels.

ES EA2 Submerged arc welding wire (SAW) used for joining fine grain steels resistant to high temperatures, structural steels, construction naval vessels, pressure vessels, shipbuilding steels, pipes and pipeline steels up to grade X70, etc.

ES EA2 can be combined with ES FLUX 161, ES FLUX 171 and ES FLUX 181.

Cottonseed meal cake is a byproduct of cotton processing, specifically from the extraction of oil from cottonseeds. After cottonseeds are crushed for their oil, the remaining residue is typically ground into a fine meal, which is then compressed into a solid cake form. This cottonseed cake is high in protein and fiber, making it an excellent source of feed for livestock, especially for ruminants like cattle, sheep, and goats.

Nutrient Content: Cottonseed meal is rich in protein (about 40-45%), making it a valuable supplement in animal feed. It also contains essential amino acids and fiber, though it has lower digestibility compared to some other protein sources.
Fat Content: Since most of the oil has been extracted, the fat content is relatively low compared to whole cottonseeds.
Toxicity Concern: Cottonseed meal contains gossypol, a naturally occurring toxin in cotton plants, which can be harmful to non-ruminant animals like pigs and poultry. However, gossypol levels are generally lower in the cake form compared to raw seeds, and its impact on ruminants is less significant.

Uses of Cottonseed Meal Cake:
Animal Feed: The most common use is as a high-protein supplement in livestock feed.
Soil Fertilizer: It can also be used in agriculture as an organic fertilizer, adding nutrients to the soil.
Composting: Cottonseed meal is sometimes included in compost to enhance soil structure and nutrient levels.

Shipping
When it comes to shipping, the method depends on the destination and the size of the order.
Containerized Shipping: For most international shipments, cottonseed meal is loaded into standard shipping containers. These containers are usually 20-foot or 40-foot containers, and the meal is packed tightly inside, often with a plastic liner to protect against moisture. The container is then sealed and transported to the port.

Bulk Shipping: For larger quantities, bulk carriers or specialized vessels for dry bulk cargo are used. These ships can carry massive amounts of product, and the cottonseed meal cake is loaded directly into the ship's hold using cranes or conveyor belts.

Discover the untamed elegance of raw paired cow horns measuring 1318 inches in length harvested sustainably from freerange cattle These intact dualhorn sets retain their natural earthy patinarugged keratinrich exteriors with subtle ridges curves and a matte bonewhite to amber hue that speaks of the wild grasslands Weighing approximately 12 pounds per pair they boast a gentle taper from a broad base up to 6 inches wide to a tapered tip ideal for balanced handling

Unprocessed and unbleached these horns exude authenticity with faint natural imperfections like minor cracks or veining that add character rather than detract Their lightweight yet sturdy compositionprimarily keratin with a hollow coremakes them versatile for crafting Envision them transformed into majestic powder horns ornate wall mounts ceremonial drinking vessels or bespoke knife handles In traditional practices theyre revered for spiritual carvings or musical instruments their resonant chambers amplifying echoes of ancient rituals

Ethically sourced these pairs promote ecoconscious creativity free from chemicals or dyes Perfect for artisans collectors or homesteaders they invite endless reinvention while honoring bovine legacy Embrace the raw whisper of nature in every curvetimeless tactile and profoundly primal

Product Description
Egypt is one of the most Producing country for rock and see salt

Price of product ( USD price or FOB price) :
USD 25 - Usd 35 in jumbo bags
USD 20 - USD 24 in bulk vessels

Product origin :
EGYPT

Key Specifications/Special Features :
Moisture: 0.39%
Purity( as Soudium chloride): 98.03%
Water insoluble matter: 0.61%
So4:0.88%
Ca++: 0.3%
Mg++: 0.05%
CaSo4: 1.02%
MgSo4: 0.2%
MgCl2: 0.04%"

Minimum Order Size and Packaging details :
5 Container as trial Order 27MT
10000MT in bulk vessels

ES TIG 70S-6 is a copper-coated Mn-Si-alloyed W3Si1/ER70S-6 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuil-ding.

ES TIG 70S-3 is a copper-coated Mn-Si- alloyed W2Si/ER70S-3 solid rod for the GTAW of non-alloyed steels, as used in general construction, pressure vessel fabrication and shipbuil- ding.

Red Iron Oxide

Origin: Egypt

Size Of lumps: 0-10 CM

Can supply more than 5000 tons per month

-Shipping all over the world

Packing: bulk-loose in vessel or in 0 feet container

We Are Suppliers Of High Quality Yamaaha Outboard Engines Both Used And New. We Have A Wide Range Of 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP AND MORE

EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
The all-new four-stroke, 5.6L V8 425 hp XTO Offshore is more than an outboard. Itâ??s an integrated power system. Coursing with insightful engineering and industry-first technology such as an electric steering system, itâ??s revolutionizing offshore
boatingâ??and the ownership experienceâ??for yacht-class boaters.

Our integrated digital boat control system now features Set Point. This suite of satellite-guided boat control functions
automatically maintains your position, heading or both. Suddenly fishing beneath the boat, controlled drifting and waiting in place are a snap for captains of any skill level.

SPECIFICATION:
Model Code 2: F40BEDL/ F40BETL
Engine: 4 stroke, SOHC, In-line 3
Displacement: 747 cm�³
Compression Ratio: 9.4
Max. Prop Shaft Output: 29.4 kW (40 ps) @ 5500 r/m
Full throttle rpm range: 5000 ~ 6000 r/m
Fuel Induction System: Electronic fuel injection
Starter System: Prime Start
Lubrication: Wet sump
Engine oil capacity: 1.7 l / 1.5 l * with/ without oil filter exchange
Bore x Stroke (mm): 65.0 mm x 75.0 mm
Fuel consumption: 13.6 l/h @ 5500 r/m
Trim & Tilt: Hydro (5-steps)
Shallow Water Drive Positions: (continuously variable)
Gear ratio: 2.0 (26/13)
Engine transom height: L: 536 mm (21.1
Dry Weight: 100 kg

Product Description
Silica sand is one of the most common varieties of sand found in the world. It is used for a wide range of applications, Silica sand is used in industrial processing, to make glass, as fill, and to create molds and castings.

Price of product ( USD price or FOB price) :
USD 45 - 50 USD per MT in jumbo bags
USD 30- USD 35in bulk vessels

Product origin :
EGYPT

Key Specifications/Special Features :
Moisture: 0.02%
L.O.I: 0.18%
Sio2: 99.6%
Fe2o3: 0.012%
Al2o3: 0.15%
Mgo: 0.003%

Minimum Order Size and Packaging details :
MOQ: 10 containers (250 MT) in jumbo bags
10000MT in bulk vessels"

Product descriptions from the supplier
Specification
High item

High quality 3 cylinder E75BMHDL 55.2kw 5500rpm outboard marine engine for boat
Condition

New
Engine

4 Stroke
Fuel Type

Diesel
weight

108kg
Engine type

marine engine
Engine Model

E75BMHDL
12.54LDisplacement

1140cc
Warranty

1 Year
Aplication

marine
Aspiration

turbo-charged
Cooling System

water-cooled
Rated Power

55.2KW
Engine status

high quaility
cylinder

3

Size - 30cm x 9cm x 5cmH SIZE: 12" X 3.5" X 2"H

Code - W37000920

ES MIG 80S-Ni1 is a 0.9Ni-alloyed (ER80S-Ni1), copper-coated, solid wire for the GMAW of low-temperature, ne-grained steels.

The wire provides good impact toughness down to -50C and is especially suitable for use in the construction of offshore platforms, pressure vessels, and pipelines.

ES TIG 90S-G is a 2.5Cr-1.0Mo-alloyed, copper-coated rod for the GTAW of creep-resistant steels such as pipes in pressure vessels and boilers of similar composition, Steam Genera-ting Power Plant with service temperatures of up to 600C, but it is also suitable for welding high strength steels.

ES TIG 80S-Ni2 is 2.4Ni-alloyed (ER80S-Ni2), copper-coated rod for the GTAW of low-temperature, �ne-grained steels in applications such as pressure vessels, pipes and the offshore indus- try, with a minimum yield strength of up to 470 MPa. The wire provides good impact toughness down to -60C.

ES 12018-M is recommended for use in fabrication low alloyed high tensile strength steels where weld of 120 ksi (830 MPa) minimum tensile strength are required.

ES 12018-M typically used to weld forging, casting plate and pressure vessels, automotive industrial and general fabrication, mobile equipment's railcars.

All-positional, low-hydrogen electrode for welding higher strength steels such as HY-80, HY-90 and ASTM A514, A508, A533, depositing weld metal with a minimum yield strength of 550 N/mm2 after stress relieving.

Typical application such as crane, heavy trans-port, platforms, vessel and lifting equipment in offshore, pipeline.

ES TIG 80S-B8 is a 9Cr-1Mo-alloyed, copper-coated rod for the GTAW of high temperature steels and steels for hot hydrogen service,especially in oil refineries.

ES TIG 80S-B8 typically used in chemical industries for heat exchangers, boilers, piping, ammonia synthesis process and pressure vessels at service temperatures up to 1100F (590 C).

A nickel-based rod alloyed with about 30% Cu, 2% Ti and 1% Fe for the GTAW of base materials of the same type. It can also be used for joining these alloys to steels.

ES TIG NiCu-7 is norm-ally welded with pure Ar as the shielding gas.

Typical applications include heat exchangers, piping, pumps, valves and process vessels in the chemical, offshore and marine industries.

ES TIG 90S-B3 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated rod for the GTAW of creep-resistant steels like SA-387 Grade 22, A335 Grade P22 or similar materials.

ES TIG 90S-B3 typically used in chemical industries for heat exchangers, boilers, piping and pressure vessels at service temperatures up to 1100F (590 C)

ES MIG NiCu-7 is a nickel-based electrode alloyed with about 30% Cu, 2% Ti and 1% Fe for the GMAW of base materials of the same type.

It can also be used for joining these alloys to steel. ES MIG NiCu-7 is usually welded with pure Ar as the shielding gas.

Typical applications include heat exchangers, piping, pumps, valves and process vessels in the chemical, offshore and marine industries.

Specifications for non-GMO soybean meal for export usually include:

Protein Content: Most commonly 48% min (on an as-is basis), but can also be 46% or even higher (e.g., 49-50% for dehulled meal). Moisture: Max 12-13% to ensure stability during transport and storage.

Fat (Ether Extract): Max 1.5%- 2.5%.
Crude Fiber: Max 3.0% - 7.0% (lower for dehulled, higher for non-dehulled). Dehulled meal offers higher protein and lower fiber, making it more desirable for high-performance animals like poultry.
Ash: Max 6.0%- 7.0%.

Urease Activity: Max 0.05 mg N/g/min at 30C (EEC method) or similar low levels. This indicates proper heat treatment during processing to denature anti-nutritional factors.

Aflatoxin: Max 20 ppb (parts per billion), or as per destination country's regulations.
Salmonella & E.coli: Absent.
Admixture/Foreign Material: Very low, typically less than 2%.
Non-GMO Purity: This is the defining characteristic. Exporters must provide documentation (e.g., identity preserved (IP) certificates, Non-GMO Project Verification, or other third-party certifications) confirming that the soybeans used were non-genetically modified and that segregation protocols were maintained throughout the supply chain. This usually means a threshold of less than 0.9% or 0.1% adventitious GMO presence.
Appearance: Light yellow to cream powder or granular form.
Odor: Good, typical odor, free from objectionable foreign odors.
Packaging: Common export packaging includes 25kg, 50kg PP woven bags, 1 MT (jumbo) bags, or bulk in full liner bags in 20' FCL (Full Container Loads) or vessels. Cost will vary according to packaging.
2. Nutritional Value for Animal Feed
Non-GMO soybean meal is a highly valued protein source in animal feed due to its excellent nutritional profile:
High Protein: It provides a concentrated source of high-quality protein, essential for growth, muscle development, and overall health in livestock, poultry, swine, aquaculture, and even pets.
Balanced Amino Acid Profile: It has a favorable balance of essential amino acids, particularly high levels of lysine, tryptophan, and threonine, which are often limiting amino acids in cereal grains. While methionine and cystine levels are suboptimal for monogastric animals, they are easily supplemented.
Energy Source: Besides protein, it also contributes energy to the diet through its carbohydrate and residual fat content.
High Digestibility: Soybean meal is highly digestible by most animal species, allowing for efficient nutrient utilization.
Vitamins and Minerals: It contains various vitamins (especially B vitamins) and minerals (e.g., phosphorus, potassium, magnesium, iron). However, much of the phosphorus is bound as phytic acid, requiring phytase supplementation for monogastric animals.

ES FC 308LT is a rutile, fux-cored wire, speci�cally designed to operate in the vertical and overhead positions when welding 304, 304L, 308 and 308L stainless steels.

The stabilised 321 and 347 steels may also be welded.

Typical application: welding 304L and other common 18/8 stainless steels, Nitrogen bearing 304LN and titanium stabilized 321 and General fabrication including piping, tanks, and pressure vessels

ES 81T1-Ni1M is an all-positional, rutile, fux- cored wire for good toughness down to -40C.

The wire contains 1% nickel and has exceptional operating characteristics in all positions with high deposition rates. Shielding gas Ar + 20% CO2 or CO2. ES 81T1-Ni1M is designed for the all-posit-ional welding of carbon-manganese and low-alloy steels.

Typical applications: offshore fabrications, vessels and structural steel work.

Medium Grain Rice 2% Broken White Rice With Soft Texture Common Cultivation Type

Ability to be packed into 25, 50 kg PP bags, BOPP Bag 1kg, 2kg, 5kg or as per buyersâ?? requirement.
The bags of rice can be loaded onto vessel or stuffed at total 26MT or 27MT into one 20ft container.

High Quality 2% Broken Medium Grain White Rice With 25kg 50 kg PP bags Customized packaging

LPG stands for Liquefied Petroleum Gas. It is a fuel made mainly from propane and butane gases that are compressed into a liquid form for easy storage and transportation. LPG is also known as " cooking gas" or " auto gas"

LPG is a mix of light hydrocarbon gases, mainly propane C3H8 + butane C4H10. It comes from Crude oil refining and Natural gas processing.

Key properties:
Composition: Propane C3H8 + Butane C4H10 Light hydrocarbons.
State: Gas at room temp, liquid under pressure Liquefies at 20x atmospheric pressure.
Smell: Odorless naturally, but ethanethiol/ethyl mercaptan is added so leaks smell like rotten eggs.
Density: Heavier than air. Leaks sink to ground, can run along floors/drains.
Boiling point: Propane -42C, Butane -0.5C Vaporizes instantly if spilled.
Energy: ~94 MJ/m³, higher than natural gas 38 MJ/m³.
Storage: Steel cylinders/tanks. 1L liquid - ~250L gas when vaporized.
Sulfur: Almost zero sulfur = clean burning.

Key facts:
1. Source: Comes from 2 places: 1) Natural gas processing wet gas, 2) Crude oil refining as top distillate
2. Pressure storage: Unlike LNG -162C, LPG stores as liquid at room temp with just 8-10 bar pressure. Much simpler
3. Clean fuel: Zero sulfur, burns with blue flame, no soot. 50% used for cooking/heating
4. Heavier than air: LPG vapor sinks and flows along ground. Leak = explosion risk in drains/basements
5. Autogas: LPG for cars. Cheaper than petrol, but needs LPG tank + converter kit.

Grades/blends:
1. Propane: HD-5 grade, used as auto gas/vehicle fuel
2. Butane: More common for cooking in warm climates like Port Harcourt

Common uses of LPG
Cooking (gas stoves and ovens)
Heating homes and water
Fuel for vehicles (often called autogas)
Industrial applications such as metal cutting and manufacturing
camping stoves, refrigerant, aerosol propellant.

Advantages
Burns cleaner than coal or wood
Produces high heat efficiently
Easy to store in cylinders or tanks
Portable and widely available

Safety
Because LPG is highly flammable:
Store cylinders upright.
Keep them away from heat sources.
Check regularly for leaks.
Ensure good ventilation when using LPG appliances.
LPG can not be put in a clear jar like diesel, it had just boil off instantly at atmospheric pressure. It needs a pressurized steel cylinder or cryogenic vessel to stay liquid.

Place of Origin : Egypt
Brand Name: Cairo minerals
Model Number: Quartz Lumps 30181
Type: Silica Quartz
Application: Glass,silicon metal
Grade: SiO2 Content (%): 99.80%
Fe2O3 Content (%): 0.015%
Al2O3 Content (%): <0.01%
MgO Content (%): <0.01%
CaO Content (%):<0.01%
P2O5 Content (%): -White Pure White
Size: Lumps can be customized according to customer request
Packing: Bulk loose in vessel or bulk loose in 20 feet container