Steel Suppliers and Manufacturers

Square shaped container used for storage Set of 5 pcs.

The supply of raw materials is a key issue for the world steel industry. Currently the most common steel making process are: From raw materials including iron ore, limestone and coke along with recycled steel by the blast furnace (BF) and basic oxygen furnace (BOF) route. The purpose is to extract metals from ores, and subject them to a thermochemical treatment in order to produce alloys.

Electro galvanized wire BWG20 , wire diameter: 0.93-0.95 mm.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The Incinerated scrap is the by-product of the household waste incineration. After the combustion process, the furnace output is firstly washed and then magnetically separated. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. Our Middle Plus Grade has an average Fe content of 92 95%. A Fine Grade, resulting in an average Fe content between 80-90%, is also available. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag-parts, ash and iron oxide, due to the quirky recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, around 5-7% in weight, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

The Tire derived Steel, or Tire Wire Scrap is a light melting scrap obtained during the shredding process of used tires. This material is a by-product obtained during the granulation process of waste tyres. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide: - clean steel cord that is processed in order to reduce the rubber/fiber content - Tire wire scrap that still contains up to 20% rubber/fiber For further details please feel free to contact us.

Indian Granite Steel Grey: We can supply Premium Grade to commercial grade. Size and surface and sides finishes can be customized. Finishes: Mirror, Matte, Flame finish etc. Slabs: Length- 6’ to 9’, width: 2’ to 3’, thickness:18mm (+/-1) Tiles: 45x45cm, 60x45,x60x60cm in 10mm. Any other sizes can be customize. Edge finish as per your requirement. Surface finish: we have automated polishing and Semi Automated polishing.

Standard:ASTM Grade:ASTM A653 Type:Steel Coil Technique:Cold Rolled Width:750-1250mm Name:PPGI / ASTM A653 / Color Coated Prepainted Color Steel Coils / Sheet Color:RAL Color Coil Weight:3-8 Tons

Standard:AISI, ASTM, BS, DIN, GB, JIS, Other Grade:DX01DX51 SPCC Q195 and etc Model Number:SPCC Type:Steel Plate Technique:Galvanized Surface Treatment:galvanized, aluminum, colour coated Application:Structural use ,roofing, commercial use, household Special Use:Galvanized steel sheet Width:600-2000mm Length:500-6000mm as you required Product Name:Brand new dx51 z275 galvanized steel coil MILL

Standard: ASTM,DIN,GB,JIS Grade: SGCC,SGCH,DX51D Thickness: 0.15mm-0.6mm Place of Origin: China (Mainland) Brand Name: FUTINDA Type: Steel Plate Technique: Cold Rolled Surface Treatment: Galvanized Application: roofing building material Special Use: High-strength Steel Plate Width: 0.15mm-0.6mm Length: 750-1250BC/665-1050mmAC Packaging Details: Waterproof paper covered by whole steel sheet, bundled by steel strip with iron pallet Delivery Detail: 25-30 days Specifications a fluted profile makes it suitable for many applications where flat sheet would not normally be considered Corrugated Galvanized Steel Sheets (galvanized corruagted roofing sheets) Grade:SGCC SGCH DX51D 1) Thickness:0.15-0.6mm 2 ) Width:750-1250Before Corrugated /665-1050mmAfter Corrugated 3) Zinc layer:40-160g/sm Popular size: Raw material width 750/762mm, the width of after corrugated is 665/680mm, 9 waves Raw material width 900/914mm, the width of after corrugated is 800mm, 11 waves Raw material width 1000mm, the width of after corrugated is 900/914mm, 12 waves Widly use as the factory wall, roof, warehouse and garage.

Standard: ASTM,GB,JIS Grade: MR SPCC Q195L SPTE S08AL Width: 500mm-1000mm Thickness: 0.15-0.6mm Hardness: T2,T3,T4,T5,DR8 Place of Origin: China (Mainland) Type: Tinplate Sheet Delivery Detail: Within 30 days after receipt of deposit or L/C at sight Specifications good corrosion resistance and nice performance on punching operation, extensively used as food package and painted cans etc 1. thickness:0.15-0.6mm 2. temper :T2,T3,T4,T5,DR8 3. grade :MR SPCC etc 4. width:500-1000mm Tinplate Standard for Temper

Galvanised steel coils

Full Hard, AFP, regular spangles,

Quick Details Standard: ASTM,GB,JIS Grade: CGCC,CGCH Thickness: 0.16mm-0.8mm Place of Origin: China (Mainland) Type: Steel Coil Technique: Cold Rolled Surface Treatment: Coated Special Use: High-strength Steel Plate Width: 750mm-1250mm Length: c Packaging & Delivery Packaging Details: Standard export seaworthy packing Delivery Detail: within 30 days Specifications As the derivative product from HDG coil, the PPGI have advantages on favorable decorative trait, high corrosion resistance etc.

Standard: ASTM,DIN,GB,JIS Grade: SGCC,SGCH,DX51D Thickness: 0.15mm-0.6mm Place of Origin: China (Mainland) Brand Name: FUTINDA Type: Steel Plate Technique: Cold Rolled Surface Treatment: Galvanized Application: roofing building material Special Use: High-strength Steel Plate Width: 0.15mm-0.6mm Length: 750-1250BC/665-1050mmAC

Standard: ASTM,GB,JIS Grade: CGCC,CGCH Thickness: 0.16mm-0.8mm Place of Origin: China (Mainland) Type: Steel Coil Technique: Cold Rolled Surface Treatment: Coated Special Use: High-strength Steel Plate Width: 750mm-1250mm Length: c

Standard : ASTM, DIN, GB, JIS Grade : Dteel Thickness : 0.4-1.2mm Model Number : A653 Type : Steel Coil Technique : Cold Rolled Surface Treatment : Coated Application : Roofing sheet ppgi coil Special Use : High-strength Steel Plate Width : 800-1250mm Length : any length color : red ppgi coil ppgi steel coil Thickness:0.14-0.8 width:600-1250mm Coil ID:508/610mm coating top:25 mircons backcoatin:5-7mircons coil weight:5tond maximum Other Design : Wooden Design And Others MOQ : 1 Ton Prepainted Galvanized Steel Coil : Prepainted Galvanized Steel Coil

Standard : AISI, ASTM, BS, DIN, GB, JIS, JISG3302 /ASTMA525 / DIN1716 /SPCC-SD Grade : SGCC,SPCC,DX51D,etc Model Number : SGCC,SPCC,DX51D,etc Type : Steel Coil Technique : Cold Rolled Surface Treatment : Color coated/galvanized Application : Building/Roofing/electrical/appliances/transport/packaging,etc Special Use : PPGI Width : 750/762/914/1000 Length : As your request Zinc : 40g/m2 to 275g/m2 Technology : Prepainted Material : SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Color : All ral colour color coated steel coil/ppgi steel coil/ppgi coil Certificate : ISO/SGS/IBR/ROHS/BV and so on Coil Weight : 3-20 Tons per coil Surface Type : Printed, embossed, corrugated

Standard : AISI, ASTM, BS, DIN, GB, JIS, Other Grade : DX01DX51 SPCC Q195 and etc Model Number : SPCC Type : Steel Plate Technique : Galvanized Surface Treatment : Galvanized, aluminum, colour coated Structural use ,roofing, commercial use, household Special Use : Galvanized steel sheet Width : 600 - 2000mm Length : 500-6000mm as you required Product Name : Brand new dx51 z275 galvanized steel coil MILL

Meet buyer's requirement with size, color, coating mass, logo etc. Competitive quality and price.

Standard : GB, JIS Grade : SGCC Model Number : 0.12-2.0mm*600-1250mm Type : Steel Coil Technique : Hot Rolled Surface Treatment : Coated Application : Flange Plate Special Use : Other Width : 600 - 1500mm Length : Coil Product Name : PPGI Material : ASTM/AISI/SGCC/CGCC/TDC51DZM/TDC52DTS350GD/TS550GD/DX51D+Z Q195-q345 Coil Weight : 3 - 6 Tons