1.Size:1/2''-4''(standard:jis, bs, ansi, din) 2.Long service life 3.Color:grey/china-white/white 4.Oven test:no sign of bubble or cracks 5.Simple installation 6.Temperature resistance: water temperature from -5deg to 45deg 7.Application:structure engineering, water supply system, agriculture irrigation 8.Delivery:about 45days 9.Payment: by T/T 10.Package:by PE plastic bag in carton. By PE plastic bag in carton.
Packaging & Delivery Packaging Details: PE BAG+CARTON Delivery Detail: Shipped in 15 days after payment HDPE PP COMPRESSION FITTINGS KEXING PP compression fittings and clamp saddles are designed specifically for connecting PE pipes with an outside diameter of 20-110mm. They are fully compatible with all LDPE, HDPE, PE40, PE80 and PE100 pipes complying with EN12201, ISO4427, ISO14236, ISO13460, DIN 8074. They are normally used to convey drinking water and fluids at pressure up to 16 bar for generic applications. The quality of the material used makes these fittings resistant to etching by numerous chemical substance and to UV rays. Kexing universal fittings can be used to connect systems using PE metric piping with existing pipes made of any material. Technical data Materials Part Material Body(A) Heterophasic block polypropylene co-polymer(PP-B) of exceptional mechanical properties even at high temperature. Blocking bush(D) Polypropylene Nut(B) Polypropylene with dye master of high stability to UV rays andsolidity to heat( S grade according to standard DIN54004) Clinching ring(C) Polyacetal resin(POM)with high mechanical resistance And hardness O Ring gasket(E) Special elastomeric acrylonitrile rubber(EPDM) for alimentary use Reinforcing ring AISI 430 (UNI X8Cr17,W,nr 14828)Stainless steel for female threads from 1''to 4'' Working Pressures KEXING PP compression fittings allows the maximum working pressure(PN~PFA*) of 16 bar(UNI 9562) for diameters from 16mm to 63mm and PN10 bar for diameters from 75mm to 110mm, at the temperature of 20°C.Maximum allowable working pressures related to the duration of pressure and temperature: Dn PFA* PMA* PEA* 16-63 16 20 24 75-110 10 12.5 15 Temperature(°C ) Da-10a25 Da+26a+35 Da+36a+45 16-63 16 20 24 75-110 10 12.5 15 Reference Standards Dimensions: UNI 9561Working Pressure: UNI 9562,DIN 8076-3,ISO 14236,BRL-K03. Polyethylene(PE)pipes: UNI 7990,DIN 8074,UNI EN 12201 Threads: UNI ISO7/1,UNI EN 10026-1,ANSI ASME B1-20.1 Flanges: DIN 2501-1,UNI EN 1452-3.IS 7005-2
We are the source manufacturers of your products. Our products: PP COMPRESSION FITTINGS, PPR PIPES, PPR FITTINGS, VALVES and MOULDS.
PP Compression Fittings coupling(20mm-110mm) Pressure piping applications Ease of installation Water distribution,Irrigation
Sure Union International produce fittings for PE pipe. Please visit our website www.plasticpipe.com.cn, from SU-180 series to 220 series.
QUICK DETAILS Material: Copper , Brass Place of Origin: Jamnagar, Gujarat (India) Connection: Male,Female Technics: Forged Color of Compression Elbow: Nature brass or Chrome plated Size of Compression Elbow: From 1/8 " to 1" Thread Type : NPT / BSP / G / M / PT / PP
The brass bushing usings special formula of high density copper alloy strip as the substrate, the surface can be used to tie the diamond shaped or hemispherical oil hole, oil groove. Advantages: high density, high bearing pressure, good wear resistance, long service life and other advantages, in order to replace the traditional cast copper sleeve, can reduce the cost of mechanical volume reduction. The product has a wide application, mainly suitable for the machinery equipment, textile machinery, mining machinery, paper machinery, engineering machinery, heavy machinery, metallurgical machinery, blast furnace machinery, cement machinery, glass machinery, chemical machinery, textile machinery, power equipment, rubber machinery, auto parts, electrical accessories, electrical equipment, road machinery, construction machinery, coal machinery, road construction machinery, etc.
Advantages For 'mass' single and double compression tube fitting All fittings shaped out of high quality forging. Double ferrule swaging action. Self-alignment. No transfer of torque to tubing. Compensating seal action to accommodate temperature and pressure variations. Universal tubing compatibility. Low torque, high purity "silver" thread coating on nut. Minimum flow restriction. Will not weak on tube wall. Fittings are tested for high pressure hydraulic, pneumatic, impulse, vibration and temperature to ensure safety and leakproof joints. Size range:-1/16"to2"and 3mm to 50mm. Material of construction stainless steel of all grades and all special materials. For 'mass' needle valves Single piece forged body or bar stock construction. Union bonnet or screwed bonnet connection Metal to metal or stellited seat for high pressure, teflon seat for low density gases and non lubricating fluids. Hard plated or stellited tip, non-rotating tip steam. Teflon seatorgrafoil packing for bubblefreejointat various temperature. Variety of end connection includes 1/8" to 1"od single and doubleferrule fittings, 1/8" to 1" male, female, npt, sp, jis, iso and din pipe ends. Optional bleed plug provided for drainage of residual fluid. Pressure range: 3000-10000psi at 120 500 degree centigrade Din valve for european standard For 'mass’ ball valves 'mass' ball valves are very compact, low torque design with panel mounting facility Two way on-off service, three and four way for switching of the stream & five way for selection of the stream All valves are made in ss and brass in sizes 1/4", 3/8" and 1/2" npt, bsp, sw and bw male and female
Prdduct nameCode Size mm Equal union T810.025.02525*25 Equal union T810.032.03232*32 Equal union T810.040.04040*40 Equal union T810.063.06363*63 Reducing unionT812.040.03240*32 Reducing unionT812.032.02532*25 90 equal elbow T813.025.02525*25 90 equal elbow T813.032.03232*32 90 equal elbow T813.040.04040*40 90 equal elbow T813.063.06363*63 Equal tee T814.025.00025*25*25 Equal tee T814.032.00032*32*32 Equal tee T814.040.00040*40*40 Equal tee T814.063.00063*63*63 Female tee T815.025.01225*1/2*25 Female tee T815.032.03432*3/4*32 Female tee T815.040.00140*1"*40 Reducing tees connectionT817.040.03240*32*40 Reducing tees connectionT817.040.02540*25*40 Reducing tees connectionT817.063.02563*25*63 Female straight connection T801.025.03425*3/4 Female straight connection T801.032.00132*1 Female straight connection T801.040.11440*11/4 Female straight connection T801.063.00263*2 Male straight connectionT811.025.01225*1/2 Terminal blockT831.034.012G3/4, 4*g1/2 Terminal blockT841.012.002G1/2, 2*g1/2 Bsp twin take off couplingT808.025.040D.25 g1/2 Bsp twin take off couplingT808.032.040D.32 g1/2 Bsp twin take off couplingT808.040.040D.40 g1/2 Collar d.63T844.063.000D.63 Collar d.40T844.040.000D.40 Collar d.32T844.032.000D.32 Collar d.25T844.025.000D.25
- two ferrules design - stainless steel material - no special tool required for installation - straight, elbow, tee, cross pattern for option - fraction size: 1/8" ~ 1" Metric size: 3 mm ~ 25 mm Plastic bag, paper case, or paper carton (depends on the quantity)
Tee , elbow , cap , p20+s55c , mould life :300k. 350*300*300
Production Range : NIPPEN TUBESTM manufactures outlets (pipefitting) of socketweld and screwed connection types. Olets (pipe fitting) are manufactured according to proven designs and from the highest quality materials, the outlet components we supply are suitable for a variety of heavy duty applications. We supply outlet fittings in a number of hard wearing industrial grades to withstand high levels of flow and corrosion. NIPPEN TUBESTM manufactures forged outlet / olet fittings to Boney & SAE standard from Classes 2000 lbs to 9000 lbs. We designs & manufactures outlet / olet ( pipefittings) of special type made according to drawing on request.
Wrought Butt-Welded Fittings: Standards: ASME B16.9 EN10253-1/2/3/4/5 MSS SP-43/75 Material: Carbon Steel: ASTM A234 Alloy Steel: ASTM A403 Stainless Steel: ASTM A420 Socket-Welded Fittings: Standards: ASME B16.11 MSS SP-79 MSS SP-83 MSS SP -95 Material: ASTM A105 A182 A234 A350 A403 A420 A815 Threaded Fittings: Standards: ASME B16.11 MSS SP-79 MSS SP-83 MSS SP-95 Material: ASTM A105
Aluzinc steel sheet in coil, galvanise steel strip, hollow pipe.
We offer Butt Welded Fittings in the shape of LR / SR 900 , 1800 , 450 ELBOW , TEE , CONCENTRIC REDUCER / ECCENTRIC REDUCER , CAP , STUB ENDS etc. Seamless / ERW Fittings : ASTM / ASME SA 234 WP / WPS 304 , 304L , 304H, 309S ,309H , 310S, 310H , 316 , 316TI , 316H , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 904L. RANGE : SIZE - 1/2" TO 56" THICKNESS : 1 mm TO 60 mm SCHEDULE : SCH. 5 TO SCH. XXS Duplex / Super Duplex Butt Welded Fittings : We offer Butt Welded Fittings in the shape of LR / SR 90�° , 180° , 45° ELBOW , TEE , CONCENTRIC REDUCER / ECCENTRIC REDUCER , CAP , STUB ENDS etc. Seamless and ERW Fittings : ASTM / ASME SA 790 UNS NO S 31803, S 32205, S 32550, S 32750, S 32760. PIPE RANGE : SIZE - 1/2" TO 12" THICKNESS : 0.5 mm TO 20 mm
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
We supply balustrade and its related components like connectors, saddles, pipes end caps in SS201, SS304, SS316, SS316L. Pipes OD42.2mm*2mm. Also available other OD on request. Balustrade shape round, square any other custom designed shape. Height about 1060mm. Finish: satin, Glossy.
Product Description: We supply connector in SS201, SS304, SS316, SS316L suitable for pipes OD42.2mm*2mm. Also available other OD on requist. Connectors in round, square any other custom designed shape. Finish: satin, Glossy.
PPR fittings are manufactured according to German DIN standards with sizes ranging from 20 mm up to 160 mm. The outstanding temperature rating up to 950 C and pressure rating up to 25 Bar make PP-R system the ideal solution for variety of applications including: