We are the source manufacturers of your products. Our products: PP COMPRESSION FITTINGS, PPR PIPES, PPR FITTINGS, VALVES and MOULDS.
We are the source manufacturers of your products. Our products: PP COMPRESSION FITTINGS, PPR PIPES, PPR FITTINGS, VALVES and MOULDS.
We are the source manufacturers of your products. Our products: PP COMPRESSION FITTINGS, PPR PIPES, PPR FITTINGS, VALVES and MOULDS.
Packaging & Delivery Packaging Details: PE BAG+CARTON Delivery Detail: Shipped in 15 days after payment HDPE PP COMPRESSION FITTINGS KEXING PP compression fittings and clamp saddles are designed specifically for connecting PE pipes with an outside diameter of 20-110mm. They are fully compatible with all LDPE, HDPE, PE40, PE80 and PE100 pipes complying with EN12201, ISO4427, ISO14236, ISO13460, DIN 8074. They are normally used to convey drinking water and fluids at pressure up to 16 bar for generic applications. The quality of the material used makes these fittings resistant to etching by numerous chemical substance and to UV rays. Kexing universal fittings can be used to connect systems using PE metric piping with existing pipes made of any material. Technical data Materials Part Material Body(A) Heterophasic block polypropylene co-polymer(PP-B) of exceptional mechanical properties even at high temperature. Blocking bush(D) Polypropylene Nut(B) Polypropylene with dye master of high stability to UV rays andsolidity to heat( S grade according to standard DIN54004) Clinching ring(C) Polyacetal resin(POM)with high mechanical resistance And hardness O Ring gasket(E) Special elastomeric acrylonitrile rubber(EPDM) for alimentary use Reinforcing ring AISI 430 (UNI X8Cr17,W,nr 14828)Stainless steel for female threads from 1''to 4'' Working Pressures KEXING PP compression fittings allows the maximum working pressure(PN~PFA*) of 16 bar(UNI 9562) for diameters from 16mm to 63mm and PN10 bar for diameters from 75mm to 110mm, at the temperature of 20°C.Maximum allowable working pressures related to the duration of pressure and temperature: Dn PFA* PMA* PEA* 16-63 16 20 24 75-110 10 12.5 15 Temperature(°C ) Da-10a25 Da+26a+35 Da+36a+45 16-63 16 20 24 75-110 10 12.5 15 Reference Standards Dimensions: UNI 9561Working Pressure: UNI 9562,DIN 8076-3,ISO 14236,BRL-K03. Polyethylene(PE)pipes: UNI 7990,DIN 8074,UNI EN 12201 Threads: UNI ISO7/1,UNI EN 10026-1,ANSI ASME B1-20.1 Flanges: DIN 2501-1,UNI EN 1452-3.IS 7005-2
Product Name : Faucet Product Description : We supply faucets/ taps for washbasin, shower room, bathtubs, kitchen sink etc- brass, Stainless Steel, ABS with Chrome, Antique finish etc. Our faucets are tested for long use either with European make ceramic disc or Chinese make ceramic discs. Please contact us for details. Key Words : Faucets, Taps, shower Mixer, Bathtub mixer
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)