Find Verified Copper Tubes Suppliers, Manufacturers and Wholesalers

Copper Bus Tubes For Electrical Application :

As per B.S. 2871 Part - 2/72 C 101
Near Equivalent specification B.S. 1977/ 63 & (ASTM B - 188-81)

Uses
Copper tube used for gas, heater and hydraulic lines, oil burners, refrigerators, evaporators and heat exchangers.

Hollow (round, square, rectangular and elliptical) electrical conductors in high voltage installation, induction furnaces etc

Non Alloy Copper Condenser Tube Semi Hard Annealing For Refrigeration 2

Steel tubes are hollow cylindrical or shaped steel products manufactured either by seamless or welded processes.

Material : Carbon Steel / Mild Steel / Stainless Steel
Types : Seamless / ERW / Welded / Galvanized
Shapes : Round / Square / Rectangular
Wall Thickness : 0.5 mm - 50 mm

We sell high quality copper wire scraps and other scrap types.Specifications Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99%Copper Scrap 99%High-quality cable scrap with almost no impurities Single Crystal Copper Wire1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame 4.SGS/RoHS

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Copper Airconditioning Tubes For Hvav And Airconditioning

Copper & SS Impulse Tubing

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

Copper is found in natural ore deposits around the world. The most abundant ore are chalcopyrite and bornite, which contain both copper and iron sulphides. These account for about 80% of the worlds known ores. We supply ores with copper content within fairly narrow ranges of specifications to satisfy our customer needs

Copper Cathode is known for high purity and consistent quality.Copper cathodes are square shaped, with 99.99 percent copper purity level.

Our copper cathodes, refined through the Mount Isa electro-refining process, offer an exceptional purity of 99.99% and 12 mm thickness.

USP/benefits: The hallmark of our high-quality copper lies in its exceptionally low impurity levels. Even trace amounts of selenium, bismuth or antimony in parts per million can significantly impact conductivity. Our cathodes are distinguished by their high-grade composition and minimal impurities, ensuring exceptional conductivity.

Certifications: Meeting stringent Indian and global standards such as BS 6017, BS EN 1978, ASTM B-115, and IS-191, our cathodes are recognised as Grade A cathodes on London Metal Exchange.

Applications: Our superior cathodes serve as the input for an extensive range of high-quality copper products, including copper tubes. They reflect our commitment to innovation and excellence in every aspect of our operations. Nearly 75% of the produce is processed into continuous wire rods

Copper Scrap -Millberry Bare Bright Copper Wire & No. 1 Copper Scrap

Copper scrap is a valuable recyclable metal used in electrical, industrial, manufacturing, smelting, and refining industries. High-quality copper scrap is mainly used for producing copper rods, wires, sheets, tubes, alloys, and other copper-based products.

1. Millberry Bare Bright Copper Wire Scrap

Millberry Bare Bright Copper Wire Scrap is one of the highest grades of copper scrap. It consists of clean, uncoated, unalloyed, bright copper wire with no insulation, no burning, no solder, no paint, and no contamination.

It is highly preferred by copper smelters, refineries, and manufacturers because of its high copper purity.

Item Description
Product Name Millberry Bare Bright Copper Wire Scrap
Grade Premium Copper Scrap / Bare Bright
Copper Purity Usually 99.9%+
Appearance Bright, clean, shiny copper wire
Material : Uncoated, unalloyed copper wire
Contamination Free from insulation, oil, grease, paint, plastic, rubber, and other metals
Use Melting, refining, copper rod/wire manufacturing
Packing Bales, bundles, jumbo bags, loose, or buyer requirement
HS Code 7404.00
Inspection SGS / Intertek / Bureau Veritas preferred
2. No. 1 Copper Scrap / +1 Copper Scrap

No. 1 Copper Scrap includes clean copper scrap such as copper wire, bus bars, clippings, pipes, and clean copper solids. It must be free from heavy oxidation, excessive solder, brass, bronze, iron, plastic, rubber, and other impurities.

This grade is also suitable for recycling, melting, and industrial copper production.

Item Description
Product Name No. 1 Copper Scrap / +1 Copper Scrap
Grade No. 1 Copper Scrap
Copper Content Usually 96%-99%+, depending on material
Appearance : Clean copper scrap, wire, tubing, clippings, bus bars
Condition Clean, unalloyed, and free from major contamination
Use Smelting, refining, recycling, and industrial manufacturing
Packing Bales, bundles, jumbo bags, pallets, or loose
HS Code 7404.00
Inspection SGS / Intertek / Bureau Veritas preferred

Copper Cathodes High-Purity Copper for Industrial Manufacturing

Our copper cathodes are high-purity refined copper sheets produced through electrorefining processes. Typically conforming to LME Grade A standards, they contain a minimum copper content of 99.99%, ensuring excellent electrical and thermal conductivity.

Copper cathodes serve as the primary raw material for producing a wide range of copper products, including electrical wires, cables, rods, tubes, and industrial components. They are widely used in power transmission, electronics, construction, and manufacturing industries due to their superior conductivity and reliability.

Key Features:

High-purity copper (minimum 99.99% Cu content)
Electrorefined to meet international standards (LME Grade A)
Excellent electrical and thermal conductivity
Uniform rectangular sheets with consistent weight and composition
Free from impurities and suitable for direct industrial use
Primary raw material for copper wire, rods, and tubing production
Widely used in electrical, construction, and industrial sectors
Available in bulk for wholesale and export supply
Carefully handled and packaged to maintain quality and integrity

Laminated Tubes are multi player tubes with Aluminum/ Plastic barriers, known as ABL/PBL tubes used in multiple industry - Medicine, Cosmetics, FMCG, Lubricant, Foods and Sauces, and others.

Business Type Manufacturer, Exporter
Type Boiler Tubes
Material Steel
Shape Round

Length 4000-5000mm
Application Industrial Use
Product Code Bs3059
Port India

Tube Bending

C12000 Copper Finned Tube Heat Exchanger Compact Design Thickness 0.635mm 1

OEM Copper Condenser Tube Semi Hard 25.4mm outer diameter

Polished ASTM C11000 Copper Condenser Tube ASTMB68 Standard

Aluminum alloy is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products.

Parameter

Product Name : Aluminum tube

Price range : $1000-$2000 Discounts are available for large orders

Minimum order quantity : 1 ton

Specifications

Thickness 1-50mm, External diameter3-900mm,or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : ASTM B210/B241 JIS H4080 DIN 1725-1-1986

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test.
certification : ISO,SGS,BV,TUV,

Processing Service : Welding, Drilling, Cutting, Bending

Surface treatment : Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc.

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Europe: Norway, Romania, Hungary, Austria

South America: Chile, Argentina, Colombia, Venezuela , etc

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Full Specifications

Electro copper Cathode Grade A 99.99%
Dimension : 914mm x 914 x 12mm (appr.) (+/-1%) (LME Standard)

1. Weight of each sheet: 125kgs (+/- 1%)

2. Net weight of each pallet: 2mts (+/- 1%)

3. Min. weight in each container: 20mts approx.

4. Gross weight of each container: 22.20mts approx.

5. Copper (Cu) min% 99.99%-99.97% min

Packing: Palletized banded by aluminum bands

Inter packing: Polyethylene film vacuum packaging for copper cathode for sale.
Outer packing: carton/plywood case.

Alloy Or Not Non-Alloy
Cu (Min) 99.99%
Ultimate Strength ( MPa) 545-1800mpa
Place of Origin Tanzania
Brand Name The Green
Application Industry
Grade copper
Processing Service Bending, Cutting, Decoiling, PUNCHING, WELDING
Type Red Copper Wire
Product name Copper Wire Scrap
Type Soft
Purity 99.95%-99.99%Copper Wire Scrap
Top Quality Cooper Wire GRADE 99.99%
Color Red Coppper
Packing Standard Sea-worthy Packing
Sample Avaliable
Standard High Level
Copper scrap for sale

We could supply the copper scrap with high quality and competitive price.
1) Our copper scrap includes wires, tubes, and plates, etc.
2)The size is chips or other.
3) Copper content could meet customers need.
Application:
Electrical, light industry, machinery,national defense industry .
Copper Scrap is industry a important sources of the raw materials, all kinds of can be recycled Recycling waste production with copper.

Copper Cathode Scrap / Copper Cathode - Grade A

Copper cathode is a high-purity copper product used in electrical, industrial, manufacturing, and metal processing industries. It is commonly used to produce copper rods, wires, tubes, sheets, bus bars, alloys, and other copper products.

1. Copper Cathode Grade A

Copper Cathode Grade A is refined copper with very high purity, usually 99.99% copper content. It is produced through electrolytic refining and supplied in sheets/plates. It is preferred by manufacturers because of its high conductivity, purity, and consistent quality.

Item Description
Product Name Copper Cathode Grade A
Grade LME Grade A / Electrolytic Copper Cathode
Copper Purity Usually 99.99% min
Appearance Reddish copper sheets / plates
Standard ASTM B115 / BS EN 1978 or equivalent
Use Copper wire, rods, tubes, sheets, electrical products, and industrial manufacturing
Size Standard cathode sheets or as supplier specification
Packing Bundles strapped on pallets
HS Code 7403.11
Inspection SGS / Intertek / Bureau Veritas preferred
2. Copper Cathode Scrap

Copper Cathode Scrap refers to off-cuts, rejected sheets, damaged cathode plates, or secondary cathode material from copper production, trading, or industrial use. It should still have high copper content and must be free from excessive contamination, oil, grease, plastic, rubber, iron, aluminium, and other foreign materials.

Item Description
Product Name Copper Cathode Scrap
Grade High Purity Copper Scrap
Copper Content Usually 99%-99.99%, depending on material
Appearance Copper plates, sheets, cut pieces, or rejected cathode sheets
Condition Clean, unalloyed, and suitable for melting/refining
Use Smelting, refining, recycling, copper manufacturing
Packing Bundles, pallets, jumbo bags, or loose
HS Code 7404.00 for scrap / 7403.11 for cathode
Inspection SGS / Intertek / Bureau Veritas preferred

Copper cathode Grade A
Purity: Purity 99.99%-99.97% min
Weight per Sheet: 125kg
Copper cathode, Cu 99.95%
3. Copper cathode Grade A Cu 99.95- 99.99 %
(1). Weight of each sheet: 125kgs (+/- 1%)
(2). Net weight of each pallet: 2mts (+/- 1%)
(3). Min. Weight in each container: 20mts approx.
(4). Gross weight of each container: 22.20mts approx.
Copper (Cu) min% 99.99%-99.97% min
(5) size: : 914mm x 914mm x 12mm (appr.)(36 x 36 x 0.5

Product : Electrolytic Copper Cathodes
Purity : Minimum 99.99%, LME Standards, Grade A
Usage : Used primarily in the electrical industry for manufacturing high-quality copper wire, power cables, and transmission components where superior electrical conductivity and corrosion resistance are critical.

Copper Wire Scrap, (Millberry Copper) 99% High Purity

Wire diameter: 0.30mm, 0.25mm, 0.20mm
Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2

Pure copper scrap 99.99%

1.Copper wire scrap
2.Copper wire,tube,plate,etc
3.High quality:99%

Copper Scrap 99%
High-quality cable scrap with almost no impurities
Single Crystal Copper Wire

Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,

Copper Concentrate is a high-quality mineral concentrate produced through the beneficiation and flotation of copper-bearing ores. It contains valuable copper minerals with copper content typically ranging from 20% to 30%, making it suitable for smelting and refining operations. Our copper concentrate is processed under strict quality control standards and supplied to metal refineries, smelters, and industrial manufacturers worldwide. Available in bulk quantities with customized specifications to meet buyer requirements.

High-purity electrolytic copper (LME Grade A 99.97% - 99.99%) used in electrical wiring, EV infrastructure, and industrial manufacturing.
Produced in compliance with ASTM B115 standards, ensuring consistent conductivity, traceability, and global acceptability.

Origin: DRC Congo
Transit Route: DRC Congo - Zambia - Dar es salaam Port
Destination: Upon client request

Copper concentrate is a processed form of copper ore that contains a high percentage of copper minerals, typically produced through crushing, grinding, and flotation processes. It serves as an important raw material for copper smelters, where the metal is extracted and refined into pure copper. Copper concentrate usually contains copper, iron, sulfur, and trace amounts of other valuable metals such as gold and silver. It plays a vital role in the global copper supply chain, supporting industries such as construction, electronics, renewable energy, and transportation.

Origin: DRC Congo
Transit Routes: Zambia to Dar es Salaam Port
Destination: Upon client request


Copper Ore is a naturally occurring mineral deposit that contains copper-bearing minerals such as chalcopyrite, bornite, malachite, and chalcocite. It is extracted from mines and processed to produce copper concentrate, which is then refined into pure copper metal. Copper ore is a vital raw material for industries including construction, electrical wiring, electronics, transportation, and renewable energy due to copper's excellent electrical and thermal conductivity. The grade of copper ore varies depending on the deposit and determines its economic value and processing requirements.

Processed copper concentrate ready for smelting operations

Available Grades:
Premium
Standard
Commercial

Key Specifications:
Cu Content: 20-30%
Moisture: 8% max
Arsenic: 0.5% max

High-grade copper ore with excellent copper content

Available Grades:
High Grade
Medium Grade
Low Grade

Key Specifications:
Cu Content: 15-25%
Moisture: 8-12%
Size: 0-50mm

99.99% pure copper cathodes meeting LME Grade A standards

Available Grades:
Grade A (LME)
Grade B
Industrial Grade

Key Specifications:
Purity: 99.99% min
Weight: 125kg ±2%
Dimensions: 914x914x12mm

Copper Cathodes are high purity refined copper products widely used in industrial and manufacturing applications. They are produced through advanced electrolytic refining to ensure consistent quality high conductivity and excellent performance for bulk industrial supply. This product is suitable for large volume buyers seeking stable composition and reliable material for further processing

Product Specification
1 Copper content 99.97% minimum
2 Impurity level 0.03% maximum
3 Electrical conductivity 100% IACS
4 Surface quality smooth uniform bright finish
5 Form standard rectangular cathode sheets

Key Features
1 High purity copper with stable chemical composition
2 Excellent electrical and thermal conductivity
3 Clean surface suitable for direct industrial use
4 Consistent weight and thickness for bulk handling
5 Ideal for large scale manufacturing and export orders

Specification Item Details
Product Name Copper Cathodes
Material Electrolytic Copper
Grade Grade A
Purity 99.99 Percent
Copper Content Cu Minimum 99.97 Percent
Shape Flat Rectangular Plates
Standard Size 914 x 914 mm
Thickness Approximately 10 mm
Weight Per Sheet Approximately 125 kg
Surface Finish Smooth Bright Clean
Electrical Conductivity Very High
Application Electrical Industrial Manufacturing
Packaging Type Bundled on Wooden Pallets
Storage Condition Dry Cool and Ventilated Area

Premium-grade copper concentrate sourced from reliable mining operations, suitable for smelting and refining industries requiring high metal recovery efficiency.

High-purity copper cathodes widely used in electrical manufacturing, construction, power transmission, and industrial applications with consistent quality and excellent conductivity.

High purity Pure Copper Foil / strip / Tape For PWE(PCE) using
99.9% Pure copper tape / strip / foil
Cu%99.90 C11000 Cu ETP
Min thickness:0.001mm
little order can accept
Specification of red copper strip we supply:
Strip: thick:0.15-3.0mm width:610mm
Plate:thick:0.5-3mm width:610mm Length:2500mm

We supply copper nickel material with purity combination of 90:10 and 70:30

We supply following copper nickel material -

Copper Nickel Pipe
Copper Nickel Tubes
Copper Nickel Pipe Bend
Copper Nickel Forged Fitting
Cupro Nickel Round Bar
Copper Nickel Wire
DIN 17664

For price specifications and more details please contact us

1. SPECIFICATION:

1) Grade: AISI 304/SUS 304 / S30400 / 1.4301

2) Shape: Coil / Roll / Strip

3) Treatment: Hot Rolled and Cold Rolled

4) Surface: No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection)

5) Thickness Range:

0.3 - 3mm ( Cold Rolled Process )

3 - 12mm or more (Hot Rolled Process)

6) Edge: Slit edge & Mill edge

7) Width Range: 10 - 2000mm

8) Length Range: Coil or as your request

9) Standard Size:

1000mm x coil mm

1500mm x coil mm

4' ----------1220mm x coil mm

5' ----------1524mm x coil mm

Above is our normal size of 304 and 304L stainless steel coil, but are capable of shearing or custom leveling to your required lengths and widths.

10) Available Standard:

ASTM, AISI, SUS, JIS, EN, DIN, GB, ASME, etc.

In general, ASTM A240/A240M or as your requirements

11) Certification: MTC and SGS and Any third party inspection

12) Package: Standard Export Sea-Package (Waterproof Kraft Paper + Bundle with steel strip)

13) Brand: TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, etc.( main mills)

14) Containers:

20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)

40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High)

40ft HC:12032mm(Lengh)x2352mm(Width)x2698mm(High)

20' container load 25tons goods whose length is under 5.8m

40' container load 25tons goods whose length is under11.8m

2. TYPICAL APPLICATIONS:
Chemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils, cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres

3. CHEMICAL COMPOSITION:
Element Carbon Manganese Sulfur Phosphorus Silicon Chromium Nickel Nitrogen
Type 304 0.07% 2% 0.03% 0.45% 0.75% 17.5-19.5% 8-10.5% 0.1%
ElementCarbonManganeseSulfurPhosphorusSiliconChromiumNickelNitrogenType 304.L 0.03% 2% 0.03%0.45% 0.75%18.0-20.0%8.0-12.0% 0.1%
4. MECHANICAL PROPERTIES:

Type Yield Strength 0.2% offset (KSI) Tensile Strength (KSI) % Elongation(2�³ Gauge length) Hardness Rockwell
304 Ann 30 min. 75 min. 40% min. HRB 92 max.
304 Hard 75 min. 125 min. 12% min. 25 -32 HRC (typical)
304 Hard 110 min. 150 min. 7% min. 32 -37 HRC (typical)
304 Hard 25 min. 70 min. 40% min. HRB 92 max.
304L Hard 75 min. 125 min. 12% min. 25-32 HRC (typical)
304L Hard 110min 150 min 6% min 32 -37 HRC (typical)

5. PROCESSING:
Types 304 and 304L cannot be hardened by thermal treatment. Annealing: Heat to 1850o F to 2050 o F and cool at sufficiently high rates through 1500oF to 800oF to avoid precipitation of chromium carbides. Stress Relief Annealing: Cold worked parts should be stress relieved at 750oF for ½ to 2 hours.

Inner Grooved Air Conditioner Copper Pipe Tube GB T19447 Standard

Cu dhp Copper Condenser Tube 19.05mm OD For Refrigerator Automobile Industry

Copper Cathodes (DRC Origin) LME -17% | Trial + 2% PB + DLC MT700


We are pleased to introduce Candour Agency, Mumbai (India), a trade-facilitating company specializing in structured international metals transactions.
We hereby offer Copper Cathodes (LME Grade A), origin: Democratic Republic of Congo, under the following commercial terms:
Commercial Terms:
Trial Shipment: Available (200-500 MT)
Contract Quantity: 2,000-5,000 MT per month
Price: LME 17% (net to buyer)
Performance Bond: 2% issued by Seller against operative DLC
Payment Terms:
100% Irrevocable, Non-Transferable DLC (MT700)
Payable at the destination port post SGS/CIQ inspection
Settlement via MT103 / TT
Alternative Supply Option - Bonded Warehouse: Copper Cathodes are also available ex-bonded warehouse in Zambia / Tanzania, where buyers may:
Open the DLC and physically inspect the material at the yard before lifting
Purchase on Ex-Bonded Warehouse basis
Or opt for FOB / CIF shipment to the destination of their choice

Intermediaries: We welcome collaboration with intermediaries having direct buyer mandates.
Commissions are protected and can be mutually agreed upon based on the deal structure.
Further documentation, technical specifications, and supporting details shall be shared with prospective buyers upon progression of the transaction.

Serious buyers are requested to share LOI/ICPO along with bank details to proceed with FCO and SPA documentation.

We look forward to establishing a long-term and mutually beneficial business relationship.

High Purity Copper Cathode 99.99% for Industrial Applications
Our copper cathode is produced using advanced electrolytic refining technology to ensure exceptional purity, stable conductivity, and consistent physical properties. With a copper content of up to 99.99%, this product meets international standards and is widely used across electrical, manufacturing, and metallurgical industries.

Copper cathodes are the primary raw material for producing copper rods, wires, tubes, sheets, and various copper alloys. Thanks to its excellent electrical conductivity, corrosion resistance, and thermal performance, our copper cathode delivers reliable results in both heavy industry and precision manufacturing.

Each batch is carefully inspected to maintain uniform thickness, smooth surface finish, and accurate chemical composition, ensuring high efficiency during melting and processing.

Product Specifications
Item Description
Product Name Copper Cathode
Purity 99.97% -99.99%
Grade Grade A
Standard LME / ASTM / GB
Shape Flat rectangular plates
Size Approx. 914 -914 mm (custom available)
Thickness 5-12 mm
Weight per Sheet 45-55 kg
Copper Content (Cu) 99.99%
Impurities 0.01%
Electrical Conductivity 100% IACS
Surface Smooth, clean, bright
Application Electrical, industrial, alloy production
Origin Tanzania
Supply Ability Large-volume monthly supply

Commodity: Copper Millberry

QYANTITY: 1,000 MT - 20,000 MT Per Month

PRICE: $5,900 USD

CFR/CIF DELIVERY TERM:

MT760/MT700/MT103 At Destination.

YARD VISIT: The buyer may visit the loading yard.

SBLC & DLC PAYMENT TERM:

1) Buyer issues official ICPO with company registration license.
2) Seller issues FCO to buyer for signing and returns with letter of acceptance letter stating to adhere to seller's terms and procedure.
3) Seller issues draft contract (SPA) open to amendment and review, buyer endorses and return to seller in word format for final contract.
4) Seller reviews and counter signs and notarize contract and send the final copy to buyer with letter of guarantee to supply, all expenses to seller.
5) Buyer acknowledges receipt with acceptance letter & RWA swift MT199 within
5 working days
6) Seller release to buyer the below listed soft performance guarantee POP documents:
- Commitment letter to supply product. - Letter of Availability of Product.
- Product Passport.
- Company Registration License.
7) Buyer's bank (a Top-50 bank in the world) issues bank instrument via BG MT760 or
DLC MT700 for the value of first month shipment to Seller's nominated bank coordinates, based on the acceptable verbiage to the Seller's bank within 10 (5+5) banking days. Loading commences. Failure to swift bank instrument within 10 working days, buyer pays a 10% deductible cost of shipment to shipping company as a provisional guarantee performance.
8) Within 5 working days from receipt of bank instrument, receiver bank issues 2% performance bond PB. However, note that seller will not issue a 2% PB on 10%
provisional guarantee performance payment to the shipping company.
9) Shipment commences at loading port and within 10 days issues full POP/shipping documents/legalized SPA via bank to bank and seller send scanned copies to buyer via email.10) Buyer conducts SGS/CIQ inspection at the destination port to ascertain quantity/quality of Product and within 72 hours make full payment via MT103/TT and seller releases
Title of Product and pays commission.

Copper Cathodes Grade A (Electrolytic Copper Grade)
Standard Cu Cathode, purity 99,99%
Dimension
914mm x 914mm x 12mm (approx.) (36 x 36 x 0.5)
Weight of each sheet
125 kg (+/- 1%)
Net Weight of each pallet
2mt (metric ton) (+/- 1%)
Min. Weight of each container
20mt (approx.)
Gross Weight of each container
22.20mt (approx.)
Packaging
Palletized (Banded by Aluminium Bands)

High-grade copper cathodes with 99.99% purity, meeting LME Grade A standards for industrial and manufacturing applications.

Specifications
Grade : Grade A (99.99%)
Cu Content : 99.97-99.99% min
Dimensions : 914mm x 914mm x 12mm (±1%)
Weight/Sheet : 125kg (±1%)
Weight/Pallet : 2MT (±1%)
Iron (Fe) : 2ppm
Lead (Pb) : 0.2ppm
Arsenic (As) : 0.1ppm
Bismuth (Bi) ; 0.1ppm
Silver (Ag) : 10ppm
Sulphur (S) : 4ppm
Certification

Quality certificates available

Trading Details
MOQ: Spot: 10,000 MT | Contract: 2,500 MT X 12 months
Origin: Multiple origins available
Delivery: CIF/FOB
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT

Premium copper millberry for specialized manufacturing uses, providing high conductivity and durability.

Specifications
Cu Content : ?Â¥ 99.95% (Standard)
Purity Results : ?Â¥ 99.96%
Wire Diameter : 0.20mm, 0.25mm, 0.30mm
Weight/Spool : 3kg, 5kg, 7kg, 15kg, 20kg
Tensile Strength : 450-1000 N/mm²
Carbon ; 0.03%
Iron (Fe) : 0.005%
Zinc : 0.003%
Cobalt : 0.001%
Phosphorus : 0.01%
Sulphur : 0.01%

Trading Details
MOQ: Spot: 10,000 MT | Contract: 2,500 MT X 12 months
Origin: Selected sources
Delivery: FOB/CIF
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT

Copper Wire

Specifications:

Appearance: Reddish-brown, flexible wire

Purity: 99.9% copper (electrolytic grade)

Diameter: Varies (e.g., 0.5mm â?? 10mm)

Conductivity: High electrical and thermal conductivity

Uses:

Electrical wiring in buildings and industries

Manufacturing of cables and transformers

Used in motors, generators, and electronics

Benefits:

Excellent corrosion resistance

High durability and conductivity

Packing:

Available as per buyer's request (e.g., coils, rolls, or spools)

Price:

$8,000 CIF/MT (Cost, Insurance, and Freight per Metric Ton)

$7,800 FOB/MT (Free on Board per Metric Ton)

Copper Cathode

Description:

Type: High-purity copper (typically 99.99% pure)

Form: Flat, rectangular sheets or plates

Dimensions: Varies, commonly 1m x 1m x 0.3cm thickness

Uses:

Primary raw material for manufacturing copper products like wires, cables, and pipes

Essential in industries such as electrical, construction, and electronics

Refined and processed into various copper alloys

Packing:

Usually packed in bundles, plastic-wrapped, or bulk shipments as per buyerâ??s request

Price:

$5,000 - $7,000 per Metric Ton (MT) (depends on market conditions and purity)

Copper Ore is a naturally occurring mineral material widely used in metal extraction, industrial manufacturing, and metallurgical processing. It contains valuable copper content suitable for refining and production applications in electrical, construction, automotive, and heavy industries. This product is carefully processed to maintain stable composition, reliable quality, and efficient performance during smelting and extraction operations. Copper Ore is known for its durability, high mineral value, and suitability for large-scale industrial use.

Specification Points:

Product Name: Copper Ore
Material Type: Natural Copper Mineral
Color: Brown, Reddish Brown, or Dark Grey
Form: Lump, Powder, or Granules
Copper Content: Available in different grades
Moisture Level: Low moisture content
Purity: Industrial-grade quality
Density: High mineral density
Application: Smelting, refining, metallurgy, and industrial processing
Features: Durable composition, stable quality, efficient processing performance
Packaging Type: Bulk packing or customized packaging
Storage Condition: Store in a dry and ventilated area
Usage: Suitable for industrial and commercial metal extraction purposes

Copper Ore is valued for its strong processing capability and consistent mineral composition, making it an important raw material for various industrial sectors requiring reliable copper production.