Count Range 2325 kernels per ounce 2835g slightly smaller than the premium 2022 grade
Visual Traits Uniform mediumtolarge whole kernels May show mild natural skin color variations but with minimal chips or scratches typically 10
Moisture Content 6 to maintain freshness in international transit
BrokenSplit Rate 1 for No1 Supreme grade and 5 for standard commercial quality
Chips Scratches 10 for No1 Supreme 20 for lower grades
Foreign Matter Negligible 00505
1820 count means 18 to 20 whole almond kernels weigh exactly 1 ounce 2835 grams
This is one of the largest available sizes in almond grading
Exporters and buyers consider it premium due to size appearance and low defect rate
Size 1820 kernels per ounce 2835g
Kernel Weight Approx 14 16 grams per almond
Color Light brown natural or offwhite blanched
Taste Mild sweet rich almond flavor
Moisture Content 6
BrokenSplit Kernels 2
Foreign Matter Nil
Aflatoxin 5 ppb meets EU FDA norms
Shelf Life Up to 12 months in cool dry storage
Color Bright red to deep red (ASTA 50-90)
Length 4-7 cm
Skin Thin skin, wrinkled surface
Pungency (Heat) Very high, 80,000 1,00,000 SHU (Scoville Heat Units)
Moisture Content 12% (sun-dried)
Seeds Moderate seeds, considered medium yield
Flavor Profile Strong spicy heat, low aroma
Processing Sun-dried whole chillies (with or without stem), sometimes steam sterilized
Shelf Life 12-18 months in dry, cool storage
Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications.
Product Description
Packaging & Delivery
Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle.
For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client.
Delivery Detail: 20-30days
Specifications
Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO)
IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile
CAS RN: 14816-18-3
EC No.: 238-887-3
PHYSICAL CHEMISTRY
Mol. Wt.: 298.3 C
M. F.: C12H15N2O3PS
Form: Yellow liquid; (tech., reddish-brown oil).
M. P.: 6.1 C
B. P.: Decomposes on distillation
V. P. 2.1 MPa (20 C) K
OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C)
Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation.
MAMMALIAN TOXICOLOGY
Oral Acute oral LD50 for rats: >2000 mg/kg.
Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg.
Not irritating to eyes or skin (rabbits).
Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol).
ADI (JMPR): 0.004 mg/kg b. W. [1999].
Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22
ECOTOXICOLOGY
Birds LD50 for hens 40 mg/kg.
Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l.
Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes)
Bees: Toxic to bees by contact and respiratory action.
APPLICATIONS
It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean.
Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Subject: Offer of High-Quality Ferro silicon (Fe Si 72-75%)
Origin: Turkey
MACH TECH Fze is established in Ham riyah Free Zone, Phase I, Sharjah, one of the busiest ports for supply and distribution of various products, globally. We are equipped with one of the largest capacities at a single location and have the ability to supply in bulk. We are one of the biggest trading companies in the private segment. It has more than 1,000 employees , this company is dealing with a number of different industries such as Petrochemical, Oil and Gas, Minerals, pharmaceuticals and food industries in national and international market.it would be great if you visit our website:www.machtechco.com
We are pleased to offer you Ferro silicon 72-75% (Fe Si) with consistent quality and competitive pricing. The product is originated from Turkey, a reliable source well-recognized in the metallurgical supply chain. Product Specification (Typical Analysis):
Silicon (Si): 72% - 75%
Aluminum (Al): <1.5%
Carbon (C): <0.2%
Sulphur (S): <0.02%
Phosphorus (P): <0.03%
Size: 10-60 mm (or as per your requirement)
Packing: 1MT Jumbo Bags or customized
Key Advantages:
Stable quality with guaranteed specifications
On-time delivery from Turkey or Emirate port
Flexible logistics and payment terms
Available stock for prompt shipment
We would be pleased to share a detailed quotation, samples, or further documentation upon your request. We look forward to the opportunity to collaborate with your esteemed company.
Floor stand model
* High Productivity: Capable of producing up to 34L/9 gal-44L/11.6 gal of ice cream per hour, this commercial ice cream machine operates efficiently in ambient temperatures (5 to 32C / 41 to 89.6�°F). With two 9L/2.4 gal hoopers, the ice cream maker can consistently deliver 10 cups ice cream (each 80g) without interruption.
* Rapid Cooling Efficiency: Featuring dual independent refrigeration compressors for enhanced performance, this ice cream machine supports single-cylinder operation, significantly reducing freezing time. Initial freeze achieves completion in just 14 minutes, with subsequent batches ready in 4 minutes or less.
* User-Friendly Operation: Equipped with an LED control panel, this ice cream maker simplifies operation. Integrating automatic cooling, hardness adjustment, one-click cleaning, and timer settings. The display provides instant updates on production time and quantity.
* Solid and Durable: Constructed with high-quality 401 stainless steel.
Please allow me to introduce myself. My name is Yosia Evan. I am producing and exporting Coconut Shell Charcoal Briquette from Surabaya, Indonesia.
Indonesia has always been known as the country of waving palm trees. That means, so many coconut trees are thriving in our country. Indonesia is the world's number one producer of coconut, especially its derivative products. Coconut fruit has many benefits for human life. In addition to the water which has many health benefits, the shell or shell also has a high economic value.
Coconut shells or coconut shells which are the raw material for charcoal briquettes today are usually thrown away. In fact, the coconut shells can be used as raw materials to be processed into charcoal, which can still be reprocessed into innovative products that can provide added value.
Indonesia's coconut charcoal briquettes have great export potential. One of the factors is the quality of Indonesian coconut briquettes which are considered the best by the international market. Coconut shell charcoal briquettes are an alternative fuel that is often used for cooking, especially for grilling foodstuffs such as in Europe, in Middle Eastern countries it is used for smoking shisha pipes, while in Asia such as in South Korea and Japan Coconut charcoal briquettes are used for cooking purposes in restaurants. Because coconut shell charcoal briquettes from Indonesia can produce more heat than coal or charcoal briquettes from mangroves. In addition, briquettes from coconut shell charcoal are also safer, environmentally friendly, because they do not damage plants such as mangroves and do not cause smoke. Especially related to the issue of global warming which is very sensitive.
By the way, you can also learn what we can do and deliver from our website
Right now I would like to offer you our specific product Coconut Shell Charcoal Briquette Premium Grade product is :
. Ash content 1.8 - 2.5%
. Fixed carbon 80%
. Moisture : 5-6%
. Caloric value : 6500-7500kcal
. Burning time : 120-150mins
. Ash color : white
. MOQ : 18ton (1x20ft HC)
. TOP : D/P or CAD or TT
. Price : EXW / FOB / CNF / CIF
Factory price 98% 99% Mixed xylene for Industrial and Agriculture Grade C8H10 CAS 1330-20-7
CAS No.: 1330-20-7
Chemical Formula: CH
Description:
Xylene is a colorless, transparent liquid with a pungent, characteristic odor. It is a flammable substance that can easily mix with ethanol, ether, and various other organic solvents, but is insoluble in water. Xylene is composed of three isomers: 45% to 70% m-xylene, 15% to 25% p-xylene, and 10% to 15% o-xylene. It has a boiling point range of 137140C and is commonly used in the production of petrochemicals, paints, coatings, and solvents.
Specifications:
CH Content:
Grade I: 99% min
Grade II: 99% min
Chroma:
Grade I: 10 max
Grade II: 20 max
Evaporation Residue:
Grade I: 0.001% max
Grade II: 0.002% max
Acidity (mmol/g):
Acidity of pyrophosphoric acid The chain and ring structures of pyrophosphoric acid, tetrametaphosphoric acid or other polyphosphoric acids are formed by dehydration condensation of orthophosphoric acid, and are all condensed acids. Generally, the acidity of condensed acids is greater than that of monoacids. This is because the volume of condensed acid radical ions is large, and the negative charge density on their surfaces is much lower, so condensed acids are easy to dissociate protons. The greater the degree of condensation of similar oxygen-containing acids, the stronger the acidity. Uses: moisture retainer, quality improver, pH regulator, metal chelator. For toxicity, see industrial phosphoric acid. Chemical properties: colorless, transparent, crystalline solid or yellow syrupy liquid, highly hygroscopic. Solid pyrophosphoric acid is formed by the natural crystallization of a polyphosphoric acid mixture with a P2O5 content of 79.8%±0.2%. Soluble in ethanol and ether. When heated above the melting point, it decomposes into liquid acids containing orthophosphoric acid, pyrophosphoric acid, trimetaphosphoric acid, polymetaphosphoric acid, etc. Crystalline pyrophosphoric acid does not decompose much in ice water, but decomposes at high temperatures, and the amount of orthophosphoric acid increases. The general solid crystal is type I pyrophosphate (melting point 54.3). Type I crystals are heated at about 50 for several hours in a closed tube and then become type II (melting point 71.5). This product is stable at room temperature. Uses: used as catalyst, concealing agent, metal refining, stabilizer for organic peroxides. It is also used to adjust the Ph value of the electroplating solution in the copper electroplating process.
Phoxim is a highly effective and widely used organophosphorus insecticide that belongs to the family of carbamates. It is renowned for its exceptional pest control capabilities and its versatility in various agricultural and horticultural applications.
Product Description
Packaging & Delivery
Packaging Detail: For liquid: 200LTR/drum, 20L/drum, 1L/bottle, 500ml/bottle, 250ml/bottle, 100ml/bottle.
For solid: 25 kg/drum, 25kg/bag, 1kg/bag or on the requirement of client.
Delivery Detail: 20-30days
Specifications
Common name: Phoxim (BSI, E-ISO, ESA); Phoxime ((f) F-ISO)
IUPAC name: Chemical Abstracts name: A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile
CAS RN: 14816-18-3
EC No.: 238-887-3
PHYSICAL CHEMISTRY
Mol. Wt.: 298.3 C
M. F.: C12H15N2O3PS
Form: Yellow liquid; (tech., reddish-brown oil).
M. P.: 6.1 C
B. P.: Decomposes on distillation
V. P. 2.1 MPa (20 C) K
OW logP = 3.38 Henry 4.18 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 C)
Solubility In water 1.5 mg/l (20 C). In toluene, n-hexane, dichloromethane, isopropanol >200 g/l. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 C). Gradually decomposed under u. V. Irradiation.
MAMMALIAN TOXICOLOGY
Oral Acute oral LD50 for rats: >2000 mg/kg.
Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg.
Not irritating to eyes or skin (rabbits).
Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol).
ADI (JMPR): 0.004 mg/kg b. W. [1999].
Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; R22
ECOTOXICOLOGY
Birds LD50 for hens 40 mg/kg.
Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l.
Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes)
Bees: Toxic to bees by contact and respiratory action.
APPLICATIONS
It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean.
Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
These beans are about 14~18cm and almost are 14~16cm. I saw many buyers in Alibaba prefer beans 18cm+. But if you want Madagascar vanilla beans,you may be disappointed.Because there are very very few beans from Madagascar are over 18cm. But in PNG, Tonga, Indonesia, beans over 18cm are common.
Item Name
Premium Madagascar Vanilla Beans
Place of Origin
Austria
Rate of Vanillin
4%~5%
Moisture
12%~17%
Length Average
15cm
Weight
3g/PC
Color
Rasin Color
Fragrance
It smells like chocolate?Ice cream?....All the way, it's very sweet and amazing
We are a manufacturer of ice cream powder with vanilla flavor. Our product is easy to apply.
Direction: put 200g of ice cream powder with vanilla flavour into 200g of normal temperature water. Beat it with ice cream maker for 15 minutes.
Specification:
Appearance powder with white color and free flowing
Colour white powder
Odour vanilla
Taste slightly sweet
Moisture 5% max.
Ph 6.5-7.5
WINTER ICE CREAM
it has been popular since the 70-ies. The crunchy cone filled with soft chocolate cream and covered by chocolate is the number one sweetie in the cool season.
It's a good option for children to avoid throut inflammation...
GBCCUM21PF163A
DEFINITE TIME REVERSE POWER RELAY
Technical Specifications
Model No : CCUM21PF163A
CCUM21
CASE SIZE - 1-1/2D VERT. 10T
CURRENT RATING CUPUNIT - 5 AMP C.T.
V.T/P.T SECONDARY - 110 V AC
TORQUE ANGLE MTA I LEAD V - 30 DEGREES
FREQUENCY - 50 HZ
MOUNTING - FLUSH
TIME DELAY P/U OR D/O - 2.5 - 25 SECS.
AUX.VOLTAGE - 110/125 V DC
CONTACTS - 2 N/O S/R
FLAG - YES
External Resistor 1.3 K OHMS 35 W
Name Plate RZF9151-601 RFH9072-604
Outline Diagram MFJ013 <(>&<)> FJ0349
Wiring Diagram MPDZ609-01-1
We are a leading and well recognized name in the field of offering a wide variety of Blended Food Colors. These Blended colors are derived from mixing different primary as well as secondary colors either independently or with one another. The resultant colors are unique I color property and provide a different feel to products where these are added.
Here, our expertise lies in also manufacturing and supplying blended food colors that are prepared from primary food color's previously certified batches. Here, our expertise also lies in creating blends as per requirement of clients. Offering these in different shades and strength, some of the areas where these blended colors are used in include:
Cosmetics
Pesticides
Writing Inks
Tablets & Capsules
Toothpastes
Because of limited basic colors availability, these colors are used in food and can be made available in more hue and color options as demanded by the customers. With our expertise in formulating pure range of blended food colors, we ensure these are derived from appropriate mix of primary and secondary food colors. Made available at highly competitive prices, these Blended colors are mixture of
Two/ more water-soluble colors
Lake colors
These can also be customized and match up with exact color shade requirements as per the approved counter sample.
Yes! I am Interested
Features
As natural food colors available are limited, hence large number of colors is artificially made using different chemicals where two/more water soluble food coloring agents are combined in numerous ways so as to produce an array of shades. Some features include:
As mixtures of two or more water soluble colors/lake colors, these are available in more hue and color options
Customized product options
Can match exact color shade according to counter sample
Perfect mixing of two or more kinds for desired color results
Process of Manufacturing
Blended food colors involve deep in-house research where care is taken that these match as per defined international food quality standards. Forming the most widely used products, these are non-reactive as well as comparatively more stable than other colors.
The most commonly used blended food colors include:
Regular blended colors
Tailor made blended colors for clients
Lake blended food colors
The lake blended food colors are basically pigments that are made by the dispersion of colors having different concentrations. The range offered is used in variety of industries like
Pharmaceuticals
Plastic
Food containers
Advantages
Very stable in water soluble dyes
Soluble in oil, hence making it possible to be mixed in vegetable fats and oils
Versatile and adoptable because of inert absorption compounds
Applications of Blended Food Colors
Blended food colors find application in food industries and products like
Sweets
Fruits
Ice creams
Pharmaceuticals
Fruit drinks
922 Microchip Pic18F458 I P Ic Suppliers
Short on time? Let Microchip Pic18F458 I P Ic sellers contact you.
