CR-6061-3 universal automotive fuel level sensor uses tomography technology to dynamically analyze various parameters of the sensor in the medium, automatically refresh the reference value and accurately compensate. The same sensor can be changed at any time to change the measurement medium or change the installation environment. It can be automatically adapted and accurately measured without recalibration, and is not affected by dielectric constant and temperature changes. For example, after a CR-6061-3 automotive fuel level sensor is installed in a automotive , the automotive travels from the south of the country to the north, no matter how the fuel label is changed, or what additive is added, it can be accurately measured without recalibration. Its true oil level. And temperature, radio frequency interference and other factors have no effect on the sensor.
CR-6061-3 type automobile oil level sensor can simultaneously output temperature signal from communication bus with accuracy of 0.1
Performance
Detection range: 0.05-1m
Accuracy: 0.1 level
Pressure range: as required
Probe diameter: Φ16
Supply voltage: 12-28VDC
Medium temperature: -50-125
Output signal: 4-20mA, 0-5V, 0-10V, 485 communication, 232 communication, CAN bus communication
Fixing method: Thread M20*1.5 or flange mounting, special specifications can be customized according to requirements
Explosion-proof grade: intrinsically safe ExiaIIC T6 flameproof ExdIIC T5
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0%
High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5%
The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential.
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Low Sulphur is Mazut M100 with a Sulphur content of 0.5%
Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0%
High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5%
The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential.
When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99.
GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock.
For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
- "Very Low Sulphur" is mazut with a sulphur content of 0.5%
- "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0%
- "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0%
- "High Sulphur" is a mazut with a sulphur content of 2.0-3.5%
- Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Description
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive
Applications such as office automation, automotive cabin air control, home appliances, and industrial
Process control systems. They are also useful in all applications where humidity compensation is needed.
Features applications
• fulll interchangeability with no calibration
Required in standard conditions
• automotive
• instantaneous desaturation after long periods in
Saturation phase
• home appliance
• compatible with automatized assembly
Processes, including pb free wave soldering
And reflow processes (1)
• printers
• meteorology
• individual marking for compliance to stringent
Traceability requirements
• part may be washed with distilled water
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel.
Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze).
Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal.
We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under:
Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality.
Complete combustion of coking coals resulting in almost negligible levels of pollution.
Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications.
We are planning to develop new trends as far as improved coke quality is concerned.
Completely RCC coal & coke yard which ensures that the coke quality is maintained.
Exclusive mechanized machines for exact sizing and screening of coke.
Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke.
We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys.
We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven.
Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required.
The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Capacitive humidity sensor hs1101 hs1101lf humidity and temperature sensor
Model number:hs1101lf
Description:
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.
Features:
• lead free component
• high reliability and long term stability
• patented solid polymer structure
• suitable for linear voltage or frequency output circuitry
• fast response time and very low temperature coefficient
• fulll interchangeability with no calibration required in standard conditions
• instantaneous desaturation after long periods in saturation phase
• compatible with automatized assembly processes, including pb free wave soldering and reflow processes
• individual marking for compliance to stringent traceability requirements
• part may be washed with distilled water
Applications
Automotive/ home appliance/ printers / meteorology
* Lead free component
* High reliability and long term stability
* Patented solid polymer structure
* Suitable for linear voltage or frequency output circuitry
* Fast response time and very low temperature coefficient
DESCRIPTION
Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. They are also useful in all applications where humidity compensation is needed.
FEATURES
* Full interchangeability with no calibration required in standard conditions
* Instantaneous desaturation after long periods in saturation phase
* Compatible with automatized assembly processes, including Pb free wave soldering and reflow processes
* Individual marking for compliance to stringent traceability requirements
* Part may be washed with distilled water.
APPLICATIONS
* Automotive
* Home Appliance
* Printers
* Meteorology
PERFORMANCE SPECS
Operating Temperature: -60 to 140 °C
Storage Temperature: -60 to 140 °C
Supply Voltage (Peak): 10 Vac
Humidity Operating Range: 0 to 100 % RH
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
1. Application
Level of Lubricant and hydraulic oil for machineries
Water tanks and level measurement and controls in industries area
Tank level of shipment
Swage treatment
Irrigation and hydraulic monitoring
HAVC
2. Features
High sensitivity, good long term stability
Strong reliability
Water-proof, dust-proof
Varies construction and installation methods
EMI/RFI
Special condensation design
High strength stainless steel construction.
Urad dal is a rich source of protein, particularly for vegetarians and vegans. Protein is essential for muscle repair, growth, and overall body function. Urad dal is high in carbohydrates, primarily in the form of starch. Carbohydrates are the main source of energy for the body and are important for fueling various physiological processes. Urad dal is a good source of dietary fiber, including both soluble and insoluble fiber. Fiber is important for digestive health, promoting regular bowel movements, and reducing the risk of constipation. It also helps regulate blood sugar levels and cholesterol levels.
Urad (Black gram) advantages
Rich Source of Protein
High in Dietary Fiber
Blood Sugar Management
Antioxidant Properties
black gram 2
Urad (Black gram) usage
Idli and Dosa Batter
Curries and Gravies
Snacks and Appetizers
Sweets
Papad
Vada
Urad dal contains various vitamins, including vitamin B1 (thiamine), vitamin B9 (folate), and small amounts of other B vitamins such as riboflavin (B2), niacin (B3), and vitamin B6. These vitamins play important roles in metabolism, energy production, and overall health. Urad dal is rich in minerals such as potassium, calcium, phosphorus, magnesium, iron, and zinc. These minerals are essential for bone health, muscle function, and the proper functioning of various biochemical processes in the body. Urad dal contains antioxidants such as flavonoids and phenolic compounds, which help neutralize harmful free radicals in the body. By reducing oxidative stress, urad dal may help protect cells from damage and lower the risk of chronic diseases
Product type : Legumes
Packging Type : Standerd pack, pp bag, as per requirement
Soybeans are one of the best plant-based sources of protein, containing all nine essential amino acids. They are considered a complete protein, making them an excellent choice for vegetarians and vegans. Protein is essential for muscle repair, growth, and overall body function. Soybeans contain carbohydrates, primarily in the form of starch and dietary fiber. Carbohydrates are the main source of energy for the body and are important for fueling various physiological processes. Soybeans are a good source of dietary fiber, including both soluble and insoluble fiber. Fiber is important for digestive health, promoting regular bowel movements, and reducing the risk of constipation. It also helps regulate blood sugar levels and cholesterol levels
soybean usage
Whole Soybeans
Tofu (Bean Curd)
Soy Sauce
Soy Protein Isolate
Soybean Oil
Textured Vegetable Protein (TVP)
Soybeans contain various vitamins, including vitamin K, vitamin C, and several B vitamins such as folate, thiamine (B1), riboflavin (B2), niacin (B3), and vitamin B6. These vitamins play important roles in metabolism, energy production, and overall health. Soybeans are rich in minerals such as calcium, iron, magnesium, phosphorus, potassium, zinc, and manganese. These minerals are essential for bone health, muscle function, and the proper functioning of various biochemical processes in the body
Product type : Legumes
Packging Type : Standerd pack, pp bag, as per requirement
Tuvar (Pigeon pea)
Tuvar dal is high in carbohydrates, primarily in the form of complex carbohydrates such as starch and dietary fiber. Carbohydrates are the main source of energy for the body and are important for fueling various physiological processes. Tuvar dal is an excellent source of dietary fiber, both soluble and insoluble. Fiber is important for digestive health, promoting regular bowel movements, and reducing the risk of constipation. It also helps regulate blood sugar levels and cholesterol levels. Tuvar dal contains various vitamins, including vitamin B1 (thiamine), vitamin B9 (folate), and small amounts of other B vitamins such as riboflavin (B2), niacin (B3), and vitamin B6. These vitamins play important roles in metabolism, energy production, and overall health.
Tuvar (Pigeon pea) advantages
Rich Source of Protein
High in Dietary Fiber
Blood Sugar Management
Antioxidant Properties
Pigeon Peas 1
Tuvar (Pigeon pea) usage
Dal/Lentil Curry
Dal Tadka
Sambhar and Soup
Stews and Casseroles
Snacks and Salads
Side Dishes
Tuvar dal contains antioxidants such as flavonoids and polyphenols, which help neutralize harmful free radicals in the body. By reducing oxidative stress, tuvar dal may help protect cells from damage and lower the risk of chronic diseases. Tuvar dal is low in fat and contains negligible amounts of saturated fat. This makes it a healthy choice for those watching their fat intake or trying to maintain a healthy weight
Product type
Legumes
Packging Type
Standerd pack, pp bag, as per requirement
Rajma (kidney beans)
Rajma is a rich source of plant-based protein, making it an important food for vegetarians and vegans. Protein is essential for muscle repair, growth, and overall body function. Rajma is high in carbohydrates, primarily in the form of complex carbohydrates such as starch and dietary fiber. Carbohydrates are the main source of energy for the body and are important for fueling various physiological processes. Rajma is an excellent source of dietary fiber, both soluble and insoluble. Fiber is important for digestive health, promoting regular bowel movements, and reducing the risk of constipation. It also helps regulate blood sugar levels and cholesterol levels.
Rajma (kidney beans) advantages
Rich Source of Protein
High in Dietary Fiber
Blood Sugar Management
Weight Management
Rajma (kidney beans) usage
Rajma Curry
Rajma Chawal
Rajma Wrap or Roll
Rajma Soup
Rajma Burger or Patty
Rajma Pulao
Rajma is rich in minerals such as iron, potassium, phosphorus, magnesium, and zinc. These minerals are essential for bone health, muscle function, and the proper functioning of various biochemical processes in the body. Rajma contains antioxidants such as flavonoids and polyphenols, which help neutralize harmful free radicals in the body. By reducing oxidative stress, rajma may help protect cells from damage and lower the risk of chronic diseases.
Product type
Legumes
Packging Type
Standerd pack, pp bag, as per requirement
Virgin Oil D6, also known as residual fuel oil, is a petroleum product that is obtained from the refining process. It has a high density and a high viscosity, making it a suitable heavy fuel oil used in large marine engines and power plants that require high levels of energy. Virgin Oil D6 is produced from the residue left over after the lighter hydrocarbons, such as gasoline and diesel fuel, are removed from crude oil. It is a heavy, black viscous liquid that is resistant to flow. The product has a high sulfur content, typically between 2.5% and 4%, and a calorific value of approximately 38 MJ/kg.
* PM Proprylene Glycol Monomethyl Ether is a colorless and transparent liquid with low toxicity and good solubility. It is widelyused as solvents and additives in coatings, printing inks, dyes, pesticides, cosmetics and other industries. PM Proprylene GlycolMonomethyl Ether has excellent dissolving ability and can effectively dissolve various resins, pigments and additives, making theproducts made with good uniformity and stability. In addition, the evaporation rate of PGME is moderate, which can make thecoating or ink layer form good leveling and gloss during the drying process.
1.As a solvent; dispersant or diluent, it is used in industries such as coatings, inks, printing and dyeing, pesticides, celluloseand acrylates.
2. It can also be used as fuel antifreeze, cleaning agent, extraction agent and non-ferrous metal beneficiation agent. It can also be used as raw material for organic synthesis.
3.Mainly used as an excellent solvent for nitrocellulose, alkyd resin and maleic anhydride-modified phenolic resin, as an additive for jet fuel antifreeze and brake fluid, etc.; mainly used as a solvent, dispersant and diluent, and also used Used as fuel antifreeze, extraction agent, etc.
Product Parameter:
Type: Optical Level Sensor
Power supply: 5V DC
Material: PC or PSU
Size: 1.46*1.46*2.57
Operating Temperature: -20~ +65 °C
Storage Temperature: -40~ +85 °C
Working Life: 50000 Hrs
Products Features:
1. No mechanical moving components and with high reliability.
2. Small in size and low in cost.
3. High liquid level control precision and can be installed from any direction
4. Satisfying the requirements in Safety Standards.
5. The sensor itself satisfies RoHS requirements.
6. Waterproofing standard IP67.
7. Accuracy is between ±1mm.
Application:
Water dispenser
Water heater
Humidifier
Medical devices or equipment
Electrical appliances and equipments etc. requiring liquid-level control
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
