1. Application
Level of Lubricant and hydraulic oil for machineries
Water tanks and level measurement and controls in industries area
Tank level of shipment
Swage treatment
Irrigation and hydraulic monitoring
HAVC
2. Features
High sensitivity, good long term stability
Strong reliability
Water-proof, dust-proof
Varies construction and installation methods
EMI/RFI
Special condensation design
High strength stainless steel construction.
OEM Optical Water Sensor Water Level Sensor
Whilst maintaining our very competitive pricing, the Optomax Industrial range of liquid level sensors offer higher supply voltage ranges, higher current drive options and an extended temperature range for more challenging specifications and environments.
SST has improved this range of industrial level sensors and introduced new features such as;
Low power consumption, reducing supply current from 15mA to 2mA
Increased output power, increasing output sink and source current from 500mA to 1A
They are solid state, no moving parts unlike mechanical switches where debris can get jammed and cause unreliability.
Very accurate and precise readings
Easy to install, saving assembly time
Very robust which permit use in a wide range of fluids and chemicals
Housings, cabling and connectors are made to your requirements
High pressure options available
Optomax Industrial Glass Series Liquid Level Switches Description
The Optomax Industrial Glass range liquid level switches can operate in aggressive environments due to their stainless steel and glass construction while offering industrial supply voltages and outputs that can directly drive loads.
The microcontroller based Optomax Industrial Glass Range liquid level switches are solid state, incorporating an infra-red LED and phototransistor which are optically coupled by the tip when the sensor is in air. When the sensing tip is immersed in liquid, the infra-red light escapes making the output change state. The sensor can detect the presence or absence of almost any liquid type; oil or water based. It is insensitive to ambient light and is not affected by foam when in air or by small bubbles when in liquid.
A range of N and P type output configurations can sink or source up to 1A at supply voltage ranges from 4.5 to 15.4Vdc or 8 to 30Vdc and can be configured to output a high or low signal in either a wet or dry state. Options for connecting to inductive loads or digital interfaces are also available.
With housing threads suitable for external sensor mounting and for use in two operating temperature ranges; Standard (-25 to 80'C) or Extended (-40 to 125'C).
LLG210D3-00x Liquid Level Switches FEATURES
* Liquid level switches that can detect almost any liquid type; oil or water based
* Suitable for harsh environments; robust stainless steel housing and glass tip
* Choice of mounting threads
LLG210D3-00x Liquid Level Switches BENEFITS
* High power
* Industrial supply voltage
* Direct load drive
ToughSonic 14 Level & Distance Sensor
PC or Button Setup, Waterproof, Two Selectable Outputs
TSPC sensors and SenixVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration!
ToughSonic sensors contain a rugged transducer potted in a stainless steel housing for long life.
Outputs respond to measured distance and non-contact technology means nothing touches your materials.
TSPC-30S1 Series Ultrasonic Level & Distance Sensor Features
Distance Measurements
* Long range, short dead band
* Unaffected by optical factors like color and transparency
* PC or button "teachable" setup
* Narrow beam with adjustments to optimize performance
* Temperature compensated
Packaging & Performance
* Quick mounting
* Durable sealed housing for wet or dirty applications
* Short & overload protected I/O
* Multi-sensor synchronization
* Adjustable sensitivity
* Rear status indicators (3)
Free Functionality using adjustable interface features like switch hysteresis and time delays to build complete solutions such as pump or material flow controllers. Save cost by eliminating PLCs, delay circuits and time delay relays!
Liquid level switches
Honeywell lle series alternatives
For part numbers lle101000, lle102000, lle103000 and lle105000
Liquid level sensor llc101000 features
* liquid level switches that can detect almost any liquid type; oil or water based
* choice of mounting; internal or external
* choice of threads
Water fluid liquid level sensor llc200d3sh
Model number: llc200d3sh
1.General description
The liquid level sensor provides a single point detection via a
Ttl compatible output.
An infra-red led and phototransistor accurately positioned at
The base of the cone ensure good optical coupling between
The two when the sensor is in air. When the sensor’s cone is
Immersed in liquid, the infra-red light escapes from the cone
Causing a change in the amount of light at the phototransistor
Which makes the output change state.
2. Cleaning
Proper fluids should be selected based on type of
Contamination to be removed. Sst sensing recommends
Freon and alcohol based solvents. Do not use chlorinated
Solvents such as tricholorethane as these are likely to attack
The sensor material.
3.Liquid media compatibility
Before use check that the fluid in which you wish to use these
Devices is compatible with polysulphone.
Do more with less, smarter, greener, and more efficiently than ever.
Reduce your waste collection costs by up to 50% with our smart IoT-based waste bin sensors and monitoring solution. It only requires three steps:
1. Read fill-level information
Clean CAP smart waste bin sensor is compatible with any type of container installation to monitor any type of subtance or waste in real-time.
2. Optimize collection routes
CCN's route optimization and predictive analytics provide insightful historical data to generate the best routes and estimate the time of containers becoming full.
3. Collect the garbage
With CCN, you can plan ahead how collections are implemented, targeting only the locations with full trash bins.
Clean CAP Wireless Ultrasonic Fill-Level Sensor Product features
1. Can be attached to any type of bin, container, or tank
Clean CAP fill-level sensor can be mounted on any type of bin, container, or tank. If the container is made of plastic, the device can be mounted by screwing. For steel containers, Clean CAP can be fixed to the container's lid using brackets.
2. Senses both solid and liquid materials
Clean CAP's ultrasonic sensor enables it to detect both solids (general waste, paper, glass, e-waste, textile, etc.) and liquids (oil, sludge, agriculture products, etc.). The range of distance can vary between 30 cm - 400 cm (4 m / 13 ft).
3. Communicates wirelessly with monitoring platform
Clean CAP sends real-time information to Clean City Networks monitoring and data-analytics platform through wireless data transmission using 2G/3G networks. The software enables our customers to optimize their waste collection operations through data-driven decision making.
4. Designed for extreme environments and durability
Clean CAP has been tested to push the limits of its operability in conjuction with its battery life. It is completely enclosed and protected against dust and water, has a battery life of up to 10 years, and can operate in temperatures from -30 deg C (-22 deg F) to 80 deg C (176 deg F).
Clean CAP Plus Wireless Ultrasonic Fill-Level Sensor Basic specifications
* Power: 3.6V high performance lithium battery
* Size (H x W x L): 95mm x 96mm (3.74in. x 3.8in.)
* Net weight: 470g (1.04 lbs.)
* Battery life: Up to 10 years
Product description
Making use of the electrical machinery to bring blade revolving, when the medium rises to the blade position, the blade stops rotation because of the impediment of the medium, thus through the related control organization outputs
Product specification/models
Power supply: 220vac, 110vac, 24vac, 24vdc
Contact capacity: 250vac/5a, spdt
Operating temp.: -10~80 c( max. 800 c)
Power: 3w
Blade rotational speed: 1 rpm
Balde material: sus304
Protection grade: ip65
Wire outlet: m20*1.5
Application
Applicable to the manufacturing and processing equipment in the industry of food, feed, cement, plastics processing, basic engineering, chemical and chemical fiber, etc.
Other information
Installation method:
Horizontal or vertical installtion
