Humidity and temperature sensor transmitter
Digital frequential ouput
Nominal frequency 6.5 khz
Std sensitivity 13 hz/%rh
Response time 0.3 s
Response time with
Optional protection : 20 s
Accurcy-interchangeability :
3 %hr de 3 a 97%rh
Hysttrtsis <1.5%rh
Measurement range 0 a 100 %hr
Operating range : -40ªc a +80ªc
Supply voltage : 4 a 12v
Ouput resistor : 0, 2 k
Output courant : ª2 ma
Thermistance ntc 10 k a 25ªc
Operating range : -40ªc a +80ªc
Courant max : 0.3 ma
- Integrated module with temperature, humidity sensor
- Up to 100 nodes can be connected (RS485 models)
- Compact design, slim size
- Easy installation, offer 3 meter cable
- Support the various types of communications protocol
CAEL-S16 Probe Humidity and Temperature Transmitter
CAEL-S16 Humidity and Temperature Transmitter Features
* Metal probe reduce electromagnetic interference
* Interchangeable sensor for rapid maintenance
* 0 - 100%RH measurement,
* Probe pressure up to 10 bar
* Calculated hygrometric outputs
* Two channel with selectable physical quantity
* Unit support metric or imperial
CAEL-S16 Humidity and Temperature Transmitter Applications
* Semiconductor and microelectronics industry
* Food production and packaging
* Agriculture, farms
* Environmental chambers, drying equipment, spraying equipment
* Greenhouse, storage room, cooling chamber
* HVAC
6327 Thg03 Co2 Temperature And Humidity Transmitter Suppliers
Short on time? Let Thg03 Co2 Temperature And Humidity Transmitter sellers contact you.
CAEL-HT Series Multi-function Humidity and Temperature Transmitter
SERIAL's latest CAEL series Temperature and Humidity transmitter meets the harsh environmental requirements for temperature and humidity measurement. Via temperature and relative humidity values, the output can be calculated dew point temperature, absolute humidity, wet bulb temperature, the specific enthalpy and other parameters of humidity.
CAEL series Temperature and Humidity transmitter supported wall mount type, duct type and remote probe type. Metal probe provides a high temperature, mechanical stress, pressure and withstand harsh environments generated by the fine waterproof housing can avoid environmental contamination and prevent condensation generated.
Parameter values measured through the two analog output channels, the output may be a current or voltage output. You can simply establish a network by RS485 connection to achieve remote monitoring and data logging, measurement data through the storage device for analysis and processing.
LCD monitor would displays three measurement parameters at the same time, or the font is enlarged for single display to provide different visual needs. Touch buttons without having to open the housing can be set a one point adjustment for temperature and humidity, output selection, range setting, adjustment parameters, and do not carry the computer in the environment field will be able to complete the setup work.
CAEL-HT Series Humidity and Temperature Transmitter Features
* Remote probe w/M12 connector
* Metal probe reduce electromagnetic interference
* 2-wire 4-20mA with selectable physical quantity
* 0 - 100%RH measurement, temperature range up to +120'C (248')
* Probe pressure up to 10 bar
* Display and touch buttons for convenient operation
* Excellent quality and stable measurement
* IP-65 housing
*1-point user adjustment
* Analog output and RS485
* MODBUS RTU protocol with integer and floating type
* Unit support metric or imperial
* Alarm output
* Dip switch setting
* Configure adapter support
CAEL-HT Series Humidity and Temperature Transmitter Applications
* Semiconductor and microelectronics industry
* Pharmaceutical industry, paper industry
* Environmental chambers, drying equipment, spraying equipment
* Agriculture, farms
* Greenhouse, storage room, cooling chamber
* Building Automation
* Environment and ventilation control
CAEL-S16 Humidity and Temperature Transmitter Features
* Metal probe reduce electromagnetic interference
* Interchangeable sensor for rapid maintenance
* 0 - 100%RH measurement,
* Probe pressure up to 10 bar
* Calculated hygrometric outputs
* Two channel with selectable physical quantity
* Unit support metric or imperial
CAEL-S16 Humidity and Temperature Transmitter Applications
* Semiconductor and microelectronics industry
* Food production and packaging
* Agriculture, farms
* Environmental chambers, drying equipment, spraying equipment
* Greenhouse, storage room, cooling chamber
* HVAC
Features: Economic model for HVAC application.
Sensor type: MEMS
Measuring range: Temperature 0 .50 C / Humidity 0 ... 100%RH
Output: 4 ... 20 mA / 0 ... 10 V
Accuracy: Temperature 0.5 C / Humidity 3%RH
IP rating: IP54
Features: Designed for industrial application. Resistant to high temperature and high pressure.
Sensor type: Capacitive Humidity Sensor & Pt 100 A class
Measuring range: 0 . +180C
Output: 0 . 20 mA / 4 . 20 mA / 0 ... 10 V
Accuracy: Temperature 0.15 C / Humidity 2%RH
IP rating: IP65
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for a long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven, or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep it in a cool dry place before storing it in the refrigerator.
ECO-FRIENDLY COCONUT SHELL BOW
- Ingredients: Only coconut shell and coconut oil with no paint and any chemicals. - - - - Processing process: manually trimmed and polished with sandpaper through many stages in the Big Coconut area of Vietnam, Ben Tre. Finally, cover with a layer of coconut oil on the surface to help the bowl smell black coconut fragrant. - Order laser logo printing at the FACTORY PRICE!
- DIRECTIONS FOR USE
* Before you use your coconut bowl, rinse it in water at room temperature.
* Polish your coconut bowl from time to time with coconut oil.
* Not dishwasher friendly. Wash off with soap and water. Do not soak for long time.
* Do not overheat your coconut bowl and do not use it in the microwave, oven or dishwasher.
* Do not leave the coconut bowl in a place with high humidity, so keep in a cool dry place before storing in the refrigerator.
POM Regrind from zipper Teeth, industry lump, industry runner
Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.
One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.
MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.
MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability
1000 g Walnut kernels contain:
50 % 1/2 Kernels (Light)
30 % 1/4 Kernels (Light)
20 % 1/8 Kernels (Light)
100 % Mahogany mixed kernels
Packing - 10 kg carton boxes.
Shell and Foreign Material (by weight) - 0.05% maximum
Fairly uniform in color, matches the Bulgarian Walnut
Color Chart classification for â??lightâ??
Total Defects (by weight)- 5 % maximum
For maximum shelf life, store at refrigerated temperatures
below 2�° C and maximum relative humidity of 55%
Composition per 100 g of Walnut Kernels
Calories - 851
Protein - 14.8%
Fat - 60%
Carbohydrates - 16
Crude fiber - 9.6%
Vitamins
Vitamin A - 0.6
Thiamine, B1 - 24
Riboflavin - 8.21
Vitamin C - 4.4
6327 Thg03 Co2 Temperature And Humidity Transmitter Suppliers
Short on time? Let Thg03 Co2 Temperature And Humidity Transmitter sellers contact you.
