1 RFT8100 wireless temperature and humidity detection system
is composed by wireless temperature detection probes, humidity detection probes and display terminals. Adopting the advanced wireless temperature detection technology, RFT8100 transmits and displays the real time value detected from the local detection probes for the purpose of inspecting temperature and humidity on-site routinely. The alarm relay sends out signal when the temperature and humidity data exceeds or lowers the setting alarm value, and the alarm points can be found quickly by checking the alarm information. RFT8100 also provides curve diagram for checking temperature and humidity variation in short period for equipments management purpose. RFT8100 can achieve the remote monitoring function by transmitting the measured data to DCS monitor centre or equipments management centre thru RS-485 port or Ethernet port.
Humidification (heating)/dehumidification (cooling) output
Switching display of temperature and humidity
High/low limit alarm
Sensor calibration
Sensor error detection and on/off output control
Minimum on/off duration time
Function: 1. Digital displaying of temperature, humidity 2. Full automatic temperature controlling 3. Full automatic humidity controlling 4. Full automatically turning 5. Full automatically alarming 6.Full automatically ventilator 7. Back emergency system
Main Technical Index: 1. Temperature display range: 0 ~ 99.9â?? 2. Temperature measurement accuracy: �± 0.1â?? 3. Humidity display range: 0-99% RH 4. Humidity control accuracy: �± 3% RH
5. Output path: 7 Road ( over-temperature, temperature control, insufficient temperature, egg-left turning, egg right-turning, humidity control, alarm ) 6. The maximum output load current: temperature control, insufficient temperature less = 8A/AC 220V, over-temperature,egg-left turning, egg right-turning, humidity control, alarm less = 1A /AC 220V 7. Number of egg-turning : Maximum record 999 times.
8. Cycle of egg-turning: from 0 to 999 minutes (factory set at 90 minutes) 9. Turn the eggs time: 0 to 999 seconds (factory set at 180 seconds) 10. Ventilation cycle : 0-999 minutes (factory set at 120 minutes) 11. Ventilation time: 0-999 seconds (Factory set at 30 seconds) 12. The measuring line length: 1.5 meters
Working conditions: 1. Power Supply: AC 160V ~ 240V, 50Hz or AC 110V ( choose the one you need ) 2. Relative humidity: less than 85% 3. Ambient temperature: -10 ~ 60â??Digital display of temperature, humidity
Fully automatic temperature controlling
Fully automatic humidity controlling
Automatic turning
BJ-S series Intelligent temperature and humidity controller with completed FUZZY algorithm provides very precise of temperature and humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature and humidity curve by automatically.
Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily.
Accept customerized control logic modify details please contact our sales team.
FEATURES
Digital thermostat with 2 control port for fan & heater
3 digital or 4 digital LED screen for temperature and humidity value
B series temperature and humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. And have an independent humidity input can monitor the environment RH and output control signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay.
FEATURES
Electromechanical thermostat, max with 2 control port for fan & heater
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automatic
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automaticpower supply :DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL means the sensor fault display HHH mean Test temperature exceeds the range of measurement
Temperature Humidity Controller XM452
power supply: DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long-press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory
Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL mean the sensor fault display HHH mean Test temperature exceeds the range of measurement
Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller. It can Be controlled by SMS mode or 4G Data Network Mode. the 4G switch Controller support wide applications, such as access control system, Pump motor controlling, smart light fan switch, generation room monitor Control
Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller Temperature & Humidity Control function: If the Temperature(humidity) is less than (more than ) the tempeareture (humidity ) you set, the device will switch on/off automatically as you Required. for example: If you need the device to work automatically when the device less than ( more than ) a certain temperature /humidity, you Can use this function.
1. Remote Control, no distance limitation
2. Dial Control first relay, SMS control 4 relays
3. 4G Data network Remote Control Via App
4. with 4 relay output (10A/30VDC, 10A/250VAC)
5. Support Temperature/Humidity Control
6. Scheduled/Timing Control
7. Industrial class design, Aluminum alloy material
Packing List:
1* Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller
1* User Manual
Pioneer in the technology of GSM sms alarm devices, legato possesses a team of expertise in engineering and programming of communication controllers.
GSM sms alarm messenger has been a success worldwide during the past few years. It is widely installed in control and alarm systems for industrial monitoring, power plant, water supply network, geographical control and security.
Temperature & humidity sms alert controller is dedicatedly developed for environmental monitoring and control. It sends sms alarm when temperature or humidity is higher/lower than user preset levels. More importantly, it provides the on/off control of equipments e.g. Air ventilation for maintenance in temperature/humidity range.
Application is unlimited where temperature and humidity needs to be monitored on site and remotely.
Intelligent temperature & humidity controller with
completed FUZZY algorithm provides very precise
of temperature monitor. FUZZY algorithm control
fan or heater to maintain sensible & latent capacity
follows temperature/humidity curve by
automatically.
Display unit can show environment temperature
and humidity as per configure by user. The user
also can adjust environment condition very easily.
Function & Feature
·DIN(48X48mm) Controller
·Indication and control accuracy 0.1, high measurement
·Heat/Cool control and PID control mode
·All settings except time maintained permanently in non-volatile memory until changed by user
·Built-in digital filter reduce interfere
·Self calibration technology, keep stabilization
·LED display show the data, prevent dazzle, highly visible display
·Simple 4-Button user interface
·Switching power supply and low consumption.
·Use large capacity relay
Scope
Standards: gb/t 2361 and astm d1748
It is widely used in pharmaceutical, textile, food processing, bio-engineering experiments and industrial products of the temperature and humidity testing.
Features
1. Mirror stainless steel liner, surrounded is designed and made as per semicircular easy to clean, inside adjustable shelf spacing;
2. The use of double doors, insulation performance is good. Interior doors is use full glass door, open the outer door, observing the situation does not affect the internal temperature inside;
3. High-precision, high-capacity humidity generator. Ensure humidity control occurs, high precision, small fluctuations;
4. The original french “taikang” closed compressor, configure delay start. High and low pressure multiple protection.
Technical parameters
1. Dimensions: mm (depth × width × height) in order to prevail in kind
2. Room size: 400 × 400 × 500mm (depth × width × height)
3. Measuring range: 10 °c~ 85 °c (determined according to customer requirements)
4. The temperature fluctuation: ± 1 °c (no load)
5. The temperature uniformity: ± 2 °c (no load)
6. Humidity control range: 40 ~ 95% rh (no load)
7. Heating method rate: 3 ~ 4 °c/ min (no load)
8. Humidity fluctuation: ± 5% rh
9. The noise (db): 65
10. Power supply: 220v ± 10%, 50hz ± 1 ground wire, protective earth resistance of less than 4o
11. The total power: 1.8kw
1.)Performance specifications:
1. Machine model: DL-4100,
2. Capacity: 100L,
3. Temperature range: -40 -150 ,
4. Humidity range: 20% -98% RH,
5. Temperature and humidity control accuracy: ± 0.5 ± 2% RH,
*Attention: The performance guarantee of items # 2-4 above should be measured after 30 minutes of stable temperature sensing
6. The temperature and humidity are evenly distributed: ± 2.0 ± 5.0% RH,
*Note: The performance guarantee of item # 5 above requires testing at a distance of 1/6 of each wall surface in the testing area, and must be measured after stabilizing with temperature and humidity for 30 minutes
7. Inner box size: 500 high Width 400 500mm deep,
8. Outer box size: 1700 high Width 1000 1500 mm deep,
9. Equipment placement space: at least 2000 2000 2000mm (W H D) ,
10. Power supply: AC220V 4.5KW, 50HZ
Intelligent temperature & humidity controller with
completed FUZZY algorithm provides very precise
of temperature monitor. FUZZY algorithm control
fan or heater to maintain sensible & latent capacity
follows temperature/humidity curve by
automatically.
Display unit can show environment temperature
and humidity as per configure by user. The user
also can adjust environment condition very easily.
1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months.
2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum.
3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture
4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor
5. Specification
(1) power supply (vin) dc 5vf+5%
(2) electrical current 2ma (max 5ma)
(3) temperature operating range 0 ~ 70fª
(4) humidity operating range 0 ~ 100%rh (dew point)
(5) humidity measuring range 2 ~ 99%rh
(6) temperature storing range -20 ~ 85fª
(7) humidity storing range under 95%rh (no dew point)
(8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh )
(1) power supply (vin) dc 5vf+5%
(2) electrical current 1.9ma (max 5ma)
(3) temperature operating range 0 ~ 50fª
(4) humidity operating range under 95%rh
(5) humidity measuring range 30 ~ 90%rh
(6) temperature storing range 0 ~ 70fª
(7) humidity storing range lower 95%rh
(8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v )
(9) typical humidity data responding to output
The TWSK Series transformer temperature controller is specifically designed for the container transformer stations. It accurately measures the oil temperature of the transformer and the environment temperature. Real-time control the cooling fans, heaters, alarms, and trip actions based on transformer winding temperature sensors and custom programming. when the oil temperature exceeds the threshold, it automatically triggers over-temperature alarms or trips, when the ambient temperature rises, it starts the fan for cooling, and when humidity approaches condensation levels, it activates the heater for dehumidification.
The temperature sensor adopts an armored PT100 liquid sensor with a three-wire connection, supporting cable lengths of up to 20 meters. It provides precise temperature readings without the need for compensation or calibration. The controller is also equipped with RS485 communication for remote monitoring and data transmission.
Feature:
3-digit LED display;
Automatic fan/heater control;
Over temperature alarm;
PT100 temperature sensor input;
Two DC 4-20mA analog outputs;
Temperature monitoring from -50 ~ 150C;
RS485 with Modbus RTU protocol.
JRACH606B humidity controller
Intelligent humidity controller for humidifier and dehumidifier, with the characteristics of small size165*72*60mm, high accuracy, fast esponse, setting upper limit and lower limit relative humidity value and with the mobile humidity sensor. Digital display will be clearly visible at night. Stable and reliable performance, more convenient, only plug your humidifier and dehumidifier into the humidity controller and it will regulate the units output to your preset level. Cheap price. And it also can memory records. All the set parameters will be permanently preserved in the controller, need not set every switching on
Application:
Orchid, mushroom, greenhouse indoor farm; Bird swallow pet; Family, hotel, office, library, laboratory and so on.
Technique parameter:
1: Operating Voltage: AC220V/50Hz +/-10%, AC110V/60Hz +/-10%(be narrated when order)
2: Consume power: <3VA
3: Load current: 2A, 5A(max 10A resistance load)
4: Relay contact dot max current: 10A/220VAC(resistance load)
5: Set range: 10%RH-95%RH
6: Measure range: 2%RH-99%RH
7: Precision: ±3%
8: Measure range: 0-80
9: Sensor application range: 0-80
10: Sensor wire length: 3m
11: Application range: <95%RH(non dew)
12: Storage range: 0-70
13: Storage range: <95%RH(non dew)
14: Dimension: 165*72*60mm
105502 Temperature And Humidity Controller Suppliers
Short on time? Let Temperature And Humidity Controller sellers contact you.
