Jrach606B Humidity Controller

XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automatic
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automaticpower supply :DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL means the sensor fault display HHH mean Test temperature exceeds the range of measurement

Temperature Humidity Controller XM452
power supply: DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long-press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory
Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL mean the sensor fault display HHH mean Test temperature exceeds the range of measurement

1 RFT8100 wireless temperature and humidity detection system

is composed by wireless temperature detection probes, humidity detection probes and display terminals. Adopting the advanced wireless temperature detection technology, RFT8100 transmits and displays the real time value detected from the local detection probes for the purpose of inspecting temperature and humidity on-site routinely. The alarm relay sends out signal when the temperature and humidity data exceeds or lowers the setting alarm value, and the alarm points can be found quickly by checking the alarm information. RFT8100 also provides curve diagram for checking temperature and humidity variation in short period for equipments management purpose. RFT8100 can achieve the remote monitoring function by transmitting the measured data to DCS monitor centre or equipments management centre thru RS-485 port or Ethernet port.


2 EMC and safety standard

IEC61000-4-2 (GB/T17626.2)
IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4)
IEC61010-1 (GB/T4793.1).



Exterior Size:91*91*72mm
0.5KGS.

High accuracy humidity controller




Carton 165*72*60mm

Humidification (heating)/dehumidification (cooling) output
Switching display of temperature and humidity
High/low limit alarm
Sensor calibration
Sensor error detection and on/off output control
Minimum on/off duration time

Humidification/dehumidification output
High/low alarm output
Sensor error detection and on/off output control
Minimum on/off duration time

Scope
Standards: gb/t 2361 and astm d1748
It is widely used in pharmaceutical, textile, food processing, bio-engineering experiments and industrial products of the temperature and humidity testing.

Features
1. Mirror stainless steel liner, surrounded is designed and made as per semicircular easy to clean, inside adjustable shelf spacing;
2. The use of double doors, insulation performance is good. Interior doors is use full glass door, open the outer door, observing the situation does not affect the internal temperature inside;
3. High-precision, high-capacity humidity generator. Ensure humidity control occurs, high precision, small fluctuations;
4. The original french “taikang” closed compressor, configure delay start. High and low pressure multiple protection.

Technical parameters
1. Dimensions: mm (depth × width × height) in order to prevail in kind
2. Room size: 400 × 400 × 500mm (depth × width × height)
3. Measuring range: 10 °c~ 85 °c (determined according to customer requirements)
4. The temperature fluctuation: ± 1 °c (no load)
5. The temperature uniformity: ± 2 °c (no load)
6. Humidity control range: 40 ~ 95% rh (no load)
7. Heating method rate: 3 ~ 4 °c/ min (no load)
8. Humidity fluctuation: ± 5% rh
9. The noise (db): 65
10. Power supply: 220v ± 10%, 50hz ± 1 ground wire, protective earth resistance of less than 4o
11. The total power: 1.8kw

Temperature and Humidity Controller XM-18

Function: 1. Digital displaying of temperature, humidity 2. Full automatic temperature controlling 3. Full automatic humidity controlling 4. Full automatically turning 5. Full automatically alarming 6.Full automatically ventilator 7. Back emergency system
Main Technical Index: 1. Temperature display range: 0 ~ 99.9â?? 2. Temperature measurement accuracy: �± 0.1â?? 3. Humidity display range: 0-99% RH 4. Humidity control accuracy: �± 3% RH
5. Output path: 7 Road ( over-temperature, temperature control, insufficient temperature, egg-left turning, egg right-turning, humidity control, alarm ) 6. The maximum output load current: temperature control, insufficient temperature less = 8A/AC 220V, over-temperature,egg-left turning, egg right-turning, humidity control, alarm less = 1A /AC 220V 7. Number of egg-turning : Maximum record 999 times.
8. Cycle of egg-turning: from 0 to 999 minutes (factory set at 90 minutes) 9. Turn the eggs time: 0 to 999 seconds (factory set at 180 seconds) 10. Ventilation cycle : 0-999 minutes (factory set at 120 minutes) 11. Ventilation time: 0-999 seconds (Factory set at 30 seconds) 12. The measuring line length: 1.5 meters
Working conditions: 1. Power Supply: AC 160V ~ 240V, 50Hz or AC 110V ( choose the one you need ) 2. Relative humidity: less than 85% 3. Ambient temperature: -10 ~ 60â??Digital display of temperature, humidity
Fully automatic temperature controlling
Fully automatic humidity controlling
Automatic turning

BJ-S series Intelligent temperature and humidity controller with completed FUZZY algorithm provides very precise of temperature and humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature and humidity curve by automatically.



Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily.



Accept customerized control logic modify details please contact our sales team.





FEATURES





Digital thermostat with 2 control port for fan & heater

3 digital or 4 digital LED screen for temperature and humidity value

Sensor length max 10meter (default 3meter)

Minimal size 48*48mm panel mounting, optional Din-rail mounting rack