Function desc:
Use on any rotating object to transfer tiny voltage , HF signal, EMF, thermocouple, computer signals, strain gauge, current, Inter Bus, Can-Bus, Profibus, RS422, RS485, PLC, digital/analog video, digital audio , Gigabit Ethernet, sensor signal and so on.
Specifications:
Electrical data: items value
Power signal
Voltage: 380vAC/DC or higher240vAC/DC
Wire specifications: UL Teflon Teflon
Insulation resistance: 1000M @ 500VDC500m@ 500vdc
Current rating: 10A per circuit or signal
Dielectric strength: 1000V@50HZ
Electric noise: 100M@6VDC,50ma,5rpm/min
Mechanical data
Circuits1--48
Operating speed: 600rpm
Working temperature: -40~ +80
Working humidity: 65%rh or higher
Wire length: 200mm
Housing material: aluminum alloy
Torque: 10g.m
Protection: IP51 or Higher.
With the increasing degree of factory automation, more and more mobile devices need to be powered or control signals transmitted. Although cable reels are easily overlooked, they are an efficient and stable mobile power supply solution.
The driving mode of cable reel is divided into spring drive and motor drive. Use these two drive forms to retract the cables needed for mobile devices. When the device moves in the opposite direction, the reel spools. The retractable cable is the basic operation of the reel and is the key to the safety and efficiency of mobile devices.
The use of cable reels can well accommodate the cables of mobile devices, avoiding the presence of exposed cables on the factory floor, thereby reducing personnel hazards. At the same time, the work efficiency is improved, the wear of the cable is greatly reduced, and the maintenance cost is reduced.
The electric cable reel not only includes the winding body and the drive mechanism, but also includes a slip ring box. The slip ring box is equipped with a slip ring and a brush assembly installed according to the requirements of the cable. Its role is to transfer the electrical energy from the power supply point to the cable reel cable. The slip ring and the brush complete the process. This is a kind of effective transmission of electrical energy. However, brushes are consumables that need to be inspected regularly and replaced in time after wear.
Victory-way Electronic(Shenzhen) Co., Ltd. is a professional manufacturer of conductive slip rings. The product design, production, and inspection process of cable reel slip rings are mature and advanced. Product quality is high quality and reliable. Our slip ring has been sold to more than 100 countries around the world and has won unanimous praise from customers.
To ensure that the cable line is always smooth, the slip ring is indispensable. According to different installation methods of the conductive slip ring, it is divided into three types of structures: slip ring internal type, slip ring external type, and cantilever type. Among them, the internal type slip ring has a compact internal structure and beautiful appearance; the external type slip ring is easy to repair; the cantilever slip ring is suitable for winding longer and heavier cables.
We select high-quality raw material suppliers; use advanced precious metal fiber brush technology to ensure the stable and reliable transmission of current and signal data; through scientific calculations, the pressure between the fiber brush and the ring road is optimized, making the slip ring Maximize the service life; every slip ring manufactured has undergone rigorous testing and provides comprehensive after-sales service.
Pneumatic/hydraulic rotary connector slipring
Main parameter
Path number: per customer request
Working pressure: 0~1MPa or higher
Working media: Compressed air, Condensate water etc.
Working Temperature: -20°C~+60°C
Working speed: 0~50rpm or higher
Installation method: per customer request, or site design
Changeable parameter
Sealing element: material use China made or import
Structural material: carbon steel, aluminium alloy, stainless steel etc.
Connection mode: fast inserting, thread, flanged
Flow aperture: per customer request
Connection mode and specification: per customer request
Slip rings also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
4892 Slip Ring With 25 4Mm Through Bores Suppliers
Short on time? Let Slip Ring With 25 4Mm Through Bores sellers contact you.
The TH038 uses JARCH's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 6.0mm through-bore for routing hydraulic or pneumatic lines. The 2~5 amps /circuit are available in 1-24 ring.
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant.
General Information
Product Name Potassium Monopersulfate compound
CAS 70693-62-8
Chemical formula 2KHSO5 KHSO4 K2SO4
Molecular weight 614.7
Specification
Appearance White, free flowing granule
Available Oxygen, % 4.5
KHSO5, Â % 42.8
Loss on Drying  % 0.15
Bulk Density, g/L 0.80
pH (10g/L,25 C) 2.0 .4
Sieve Residue on 75 m test sieve, % 90.0
Packaging
Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements.
Storage
Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.
TC20 series slip ring is a micro slip ring, of which there is a 20 mm through-bore in the center of the shaft. It has the advantages of capsule & through bores slip ring. This design features long life & low cost, and fiber Precious metal brush contact technology realizes ultimate performance in many challenging applications. With aluminum alloy body, double precision roller bearings provide smoother running, lower torque and lower electrical noise. It is suitable for transferring signal & low power.(More product information welcome to visit slipring.net.)
Feature:
20mm through-bore, provid 1~12 ways;
Compact miniature design, small size,fit for harsh space;
Multi circuits/channels design can delivr both power & signal at the same time;
Hybrid FORJ or High Frequency rotary joints;
Aluminium alloy shaft and body for excellent shielding;
1. Mastering the key technique of design and manufacture, holding independence the intellectual property
2. Suffice the un-limit revolving video and the digital signals transmission of 360 degrees completely
3. The integrated produce standard may meet the demand of client
4. Longstanding using life
5. Can be customised for customer need the produce
Make use of advanced sheaf brush technology to design and manufacture
Suffice 360ípunrestrained continuous rotation to transmitting power and/or data
Product modularize
Long life and maintenance-free operation
Make use of advanced sheaf brush technology to design and manufacture
Suffice 360 unrestraind continuous rotation to transmitting power and/or data
Product modularize
Long life and maintenance-free operation
Specification:LDPE white reprocessed from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high
purity reprocessed resin.
LDPE White is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also suitable for extrusion (profile, sheet, pipe) blow moulding and injection moulding LDPE applications.
Packaging : 1000kg bulk bag
Melt flow rate (190C / 2.16kg) 1.4-1.6 ± 0.5 g 10 mins -1 (EN ISO 1133)
Density 0.92 ± 0.015 g cm-3 EN ISO 1183-1
Filtration 110- 130 µm
Quantity: 15-20loads per month
rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5
Density 0.92 �± 0.015
Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters.
MATERIAL: Mix color Transparent PC Industrial materials
CATEGORY: PC
TYPE: Mix color
SPECIFICATION: Separate 25 kg bag and Mark per month 78 mt Mix color Transparent PC, post Industrial materials
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1150$ - 1400$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days
Our Commitment
We are committed to delivering in accordance with the quality given, source and licensed in the field of scrap transportation.
2Lians always for the purpose of satisfying customers on the criteria of sustainability and fairness through high work efficiency
Specification: "rLDPE repro Yellow pellets from post-consumer & post-industrial films.
The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin.
toughness, strength and stretch properties. This grade is also be suitable for profile and sheet
extrusion
Packing: 1000kg bulk bag
Melt flow rate (190�?C / 2.16kg) 0.5 � 0.5
Density 0.92 � 0.015
Measured on blown film of 25 �m and BUR of 2.5 at external testing facility.
rLDPE Yellow is typically extruded at a melt temperature around 190Ã??C (min 180Ã??C, max 240Ã??C).
Mesh filters: 150 on the laser filter and 120 on the piston filters."
4892 Slip Ring With 25 4Mm Through Bores Suppliers
Short on time? Let Slip Ring With 25 4Mm Through Bores sellers contact you.
