Sintered Wire Mesh Filter Cartridge Feature
1. Sintered wire mesh filter cartridge is surface filtration
2. Sintered wire mesh filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered wire mesh filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life
Sintered Wire Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered Filter Cartridge Feature
1. Sintered filter cartridge is surface filtration
2. Sintered filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life
Sintered Wire Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Maximum Operation Temperature: 816 degree celsius
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
75um SS 304 porous wire mesh filter cartridge, which is an efficient and durable filter cartridge designed for filtrate treatment and solid-liquid separation. The product is made of high-quality stainless steel 304 material, which has excellent corrosion resistance and mechanical strength, and is suitable for various industrial application environments. In addition, the filter cartridge is designed with five layers of wire mesh sintering plus a support layer, which further improves its performance and stability.
The diameter of the flange interface of the filter cartridge is 140mm, which makes it more convenient to connect with common industrial equipment and pipelines. Whether used as a stand-alone filter cartridge or in combination with other filter media, SS 304 sintered wire mesh filter cartridges provide excellent filtration.
Parameter
Material: SS 304
Size: �?130*500mm
Flange diameter: 140mm
Pore size: 75 um
Layers: 5 layers plus one supporting layer
Features
1.Multi-layer sintered wire mesh plus support layer: The filter cartridge is designed with five layers of sintered wire mesh and one support layer. The multi-layer wire mesh is fused together through a high-temperature sintering process, and a support layer is added on top to form a strong filtration structure. This design not only provides excellent filtration accuracy and uniform pore distribution but also enhances the structural stability and durability of the filter cartridge.
2. High corrosion resistance: SS 304 stainless steel material has excellent corrosion resistance and can operate stably in various acids and alkalis, high temperatures, and corrosive media. Therefore, our sintered wire mesh filter cartridges are suitable for a wide range of industrial applications such as chemical, food processing, pharmaceutical, etc.
3. Easy to clean and maintain: The filter cartridge has a simple structure and is easy to clean and maintain. When the surface of the filter cartridge is clogged, the blockage can be removed by water flushing or backflushing, and the filtering effect of the filter cartridge can be restored. This convenient maintenance method reduces maintenance costs and improves production efficiency.
we are able to offer a superior quality range of Reinforcement Mesh. All our products are available in various sizes, designs, and shapes at market leading prices to meet the demands of customers.
FLD stainless steel sintered wire mesh pleated filter elements / cartridges are made of woven wire cloth or sintered wire mesh or sintered fiber web.
The pleated filter cartridge has a shape of candle in long and thin. so it is called candle filter/cartridge. The pleated candle filter is made with single or double layer of woven wire mesh, the perforated metal tube as support layer, welded together with bolts and caps on both ends. But some pleated filters are made without perforated metal as supporting layer.
Candle pleated Filter Media:
The Pleated candle Filter Elements are mainly three types: Stainless steel sintered fiber felt; sintered wire mesh and stainless steel woven wire mesh. Stainless Steel Sintered Fiber felt is a kind of durable and pleating filter medium, sintered into a graded pore structure. So the sintered metal fiber felt enjoy the advantages of high porosity rate, large efficiency filtration area, high dirt holding capacity and replaced.
Features and Benefits
1.) Easy replacement;
2.) Corrosion resistance;
3.) Easy clean and reuse;
4.) Large filter area;
5.) High dirt holding capacity;
6.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling;
7.) Low pressure drop due to high porosity;
8.) Long life span;
9.) Low pressure drop and low cost,
Material:
Filter Media Woven mesh or perforated or fiber metal felt, or wire woven cloth are made of stainless steel 304, 304L, 316, 316L, 317L, 904L, & Monel Hastelloy etc.
Structure:
1. The outside protection cylinder made of perforated stainless steel plate protect the filter element from damage;
2. Imported sintered fiber metal felt enjoy supreme filtration and easy cleaning.
3. The pressure resistance of stainless steel tube supporting inside core reach 175 bar.
Applicant:
The stainless steel pleated candle filter/cartridge is used for filtering of hot gas, vapor, liquid filtration, widely used as the below industries:
2.) Petroleum, chemical fiber, chemical industry and electric power;
3.) Pharmaceutics, machinery, metallurgy, ceramics;
4.) Disposal of sewage, foodstuff and beverage, cosmetic etc.
The following parameter will be confirmed before order:
1.) Size;
2.) Work pressure;
3.) Operation pressure;
4.) Material;
5.) Flange standard;
6.) Dielectric;
After-sale service:
1.) Warranty period is 12 months;
2.) Our technology team will support you for forever;
3.) Engineering service is available for your machinery overseas
Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company.
The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
75um SS 304 porous wire mesh filter cartridge, which is an efficient and durable filter cartridge designed for filtrate treatment and solid-liquid separation. The product is made of high-quality stainless steel 304 material, which has excellent corrosion resistance and mechanical strength, and is suitable for various industrial application environments. In addition, the filter cartridge is designed with five layers of wire mesh sintering plus a support layer, which further improves its performance and stability.
Parameter
Material: SS 304
Size: �?130*500mm
Flange diameter: 140mm
Pore size: 75 um
Layers: 5 layers plus one supporting layer
Features
1.Multi-layer sintered wire mesh plus support layer: The filter cartridge is designed with five layers of sintered wire mesh and one support layer. The multi-layer wire mesh is fused together through a high-temperature sintering process, and a support layer is added on top to form a strong filtration structure. This design not only provides excellent filtration accuracy and uniform pore distribution, but also enhances the structural stability and durability of the filter cartridge.
2.High corrosion resistance: SS 304 stainless steel material has excellent corrosion resistance and can operate stably in various acid and alkali, high temperature and corrosive media. Therefore, our sintered wire mesh filter cartridges are suitable for a wide range of industrial applications such as chemical, food processing, pharmaceutical, etc.
3.Easy to clean and maintain: The filter cartridge has a simple structure and is easy to clean and maintain. When the surface of the filter cartridge is clogged, the blockage can be removed by water flushing or backflushing, and the filtering effect of the filter cartridge can be restored. This convenient maintenance method reduces maintenance costs and improves production efficiency.
Applications
The 75um SS 304 porous wire mesh filter cartridge is commonly employed for the purification and filtration of liquids and gases, as well as the separation and recovery of solid particles. It is also utilized in applications such as transpiration cooling at extremely high temperatures, airflow control distribution, enhancement of heat and mass transfer, noise reduction, and current limitation. This versatile filter cartridge serves a wide range of purposes while maintaining its effectiveness and reliability.
1.Chemical industry: used for liquid treatment, solvent filtration, catalyst recovery, etc.
2.Food processing industry: used for clarification and filtration of food liquids.
3.Pharmaceutical industry: for solid-liquid separation and filtration in pharmaceutical production.
4.Oil and gas industry: used for oilfield water treatment, oil filtration, etc.
Sintered Wire Mesh Filter Feature
1. Sintered wire mesh filter is surface filtration
2.Sintered wire mesh filter is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered wire mesh filter has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life
Sintered Wire Mesh Filter Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered Mesh Filter Cartridge Feature
1. Sintered mesh filter cartridge is surface filtration
2. Sintered mesh filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered mesh filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life
Sintered Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered Mesh Filter Cartridges
Sintered Mesh Filter Cartridges are made by overlapping multiple layers of wire mesh and sintering them in a vacuum furnace, rolled into a cylinder and welded together at both ends. For the roundness and flatness of the whole structure, roll seam welding process is added. Its interlaced mesh forms a rigid structure, which overcomes the shortcomings of ordinary wire mesh of low strength and unstable pore shape, and is also superior to sintered powder cartridges, ceramic cartridges and so on. Most importantly, this stainless steel filter cartridge is popular in many industries such as food, environmental protection, chemical industry, aerospace and so on with its outstanding features such as high temperature resistance, smooth wire holes, good air permeability, and strong dirt-holding capacity.
ZHUAN LV CSM filter elements are made from CWM mesh composite (MC) filter media. This unique material is made from wire mesh and perforated metal, sintered together into a durable porous filtration medium.
The KARAM PN-44 Full Body Harness is a safety harness designed for workers performing at heights. It features adjustable straps for a secure and comfortable fit, and is made with durable materials for long-lasting use. It also has multiple attachment points for tools and equipment, making it ideal for a variety of job sites and applications. The harness is tested and certified to meet industry standards, providing peace of mind and ensuring the safety of workers while they work at heights.
Our safety harnesses are designed for maximum protection and comfort in construction, industrial, and high-altitude work. Made from durable, high-strength materials, they ensure secure fall protection and compliance with safety standards.
Sintered Wire Mesh Filter Element Feature
1. Sintered wire mesh filter element is surface filtration
2. Sintered wire mesh filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered wire mesh filter element has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life
Sintered Wire Mesh Filter Element Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization
Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision.
Parameters:
Material: 316L stainless steel
Filtration accuracy: 0.22-100um
Size: standard or customized
Application:
(1) Used as dispersion cooling material in extremely high temperature environment;
(2) Orifice plate material for gas release liquid fluidized bed;
(3) Used for high-precision, high-reliability high-temperature filter materials;
(4) Used for high pressure backwash oil filter.
Examples:
(1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry;
(2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry;
(3) Application of gas homogenization in powder industry, fluidized plate in steel industry;
(4) Buzzer, etc. in explosion-proof electrical appliances;
(5) Gas-solid, liquid-solid, gas-liquid separation.
Performance advantages:
1. High strength and rigidity: high mechanical strength and compressive strength;
2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use;
3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments;
4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).
Anping County Longyi Mesh Manufacture Co.,Ltd produing sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to -100�°C in oxidizing and 600�°C in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.
Want more information or would like to receive a quote?
Multi-layer sintered metal mesh filters combine the advantages of woven wire mesh, with micron-level pore sizes and a diffusion-bonded wire mesh laminated plate, to provide mechanical strength and stability. Typically, fine woven metal wire mesh filters are placed within multiple layers of sintered laminated plates to protect the fine mesh from mechanical damage caused by environmental pressure. 5-layer sintered laminated plates are commonly used for sintered wire mesh filters.
Parameters
Material: SUS334L SUS316L
layers: single layer, 2 to 3 layers, 5 layers and 6 layers or customized
Sheet size customized
Features
1.Uniform pore size
2.High temperature resistance and corrosion resistance
3.Cleanable and Reusable
4.Micron-level pore size
Different layers has different performance characteristics
Single layer sintered wire mesh is formed by diffusion bonding, resulting in a permanent geometric shape, pore size and filtration level. It is a cost-effective alternative to mesh filters and commonly found in disc, ring, and simple cylindrical shapes.
Two to three layers of sintered wire mesh have good mechanical strength and medium-sized pores, suitable for manufacturing pleated cylindrical filters, candle filters, and sintered discs. This type of sintered wire mesh has a filtering layer with the desired pore size sandwiched between outer and inner protection layers.
Five-layer sintered wire mesh consists of one layer of fine woven wire mesh sandwiched between two layers of coarser woven wire mesh protection layers. These three layers of woven wire mesh are then sintered together with two support layers to enhance the filtration performance. This type of sintered metal wire mesh laminated plate has a wide range of applications in chemical processing, food and beverage, pharmaceuticals, transportation, and is used for liquid and gas filtration, fluidized beds, and other applications.
Application
Oil and gas production
Chemical industry
Food
Aerospace
Polymer filtration
Energy and Nuclear Power
Polyester filtration, water treatment, oil filtration, pharmaceutical industry, chemical industry, chemical fiber industry and high high temperature media filtration.
sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to 750F (399C) in oxidizing and 900F (482C) in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.
