Sintered Mesh Filter Cartridges

Sintered Mesh Filter Cartridge Feature
1. Sintered mesh filter cartridge is surface filtration
2. Sintered mesh filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered mesh filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life

Sintered Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization

Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Sintered Wire Mesh Filter Cartridge Feature
1. Sintered wire mesh filter cartridge is surface filtration
2. Sintered wire mesh filter cartridge is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Sintered wire mesh filter cartridge has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life

Sintered Wire Mesh Filter Cartridge Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization

Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Product Introduction


Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life.



The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive.



Parameter

Material: stainless steel 304, 304L, 316, 316L

Length: 10-1500mm

Diameter: 10-80mm

Wall thickness: 10-50mm

Filtration accuracy: 0.2-300um

Layers: Single, 2 to 3, 5-layer & 6-layer or customized

Porosity: 35%-80%

Service temperature: -200 C to 1000 C



Features:

1.) Better mechanical properties;

2.) Good stable pore size;

3.) Easy cleaning, reusable and durable;

4.) Stable pore shapes for perfect permeability;

5.) Reliable quality, big particles filtration;

6.) Attractive surface;

7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling;



Application

1.) Oil & Gas production

2.) Water treatment;

3.) Food and beverage;

4.) Pharmacy;

5.) Chemical industry;

6.) Polymer filtration;

7.) Refine;

8.) Energy & nuclear.

Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life.

The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive.

Parameter
Material: stainless steel 304, 304L, 316, 316L
Length: 10-1500mm
Diameter: 10-80mm
Wall thickness: 10-50mm
Filtration accuracy: 0.2-300um
Layers: Single, 2 to 3, 5-layer & 6-layer or customized
Porosity: 35%-80%
Service temperature: -200 C to 1000 C

Features:
1.) Better mechanical properties;
2.) Good stable pore size;
3.) Easy cleaning, reusable and durable;
4.) Stable pore shapes for perfect permeability;
5.) Reliable quality, big particles filtration;
6.) Attractive surface;
7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling;
Application
1.) Oil & Gas production
2.) Water treatment;
3.) Food and beverage;
 4.) Pharmacy;
 5.) Chemical industry;
6.) Polymer filtration;
 7.) Refine;
 8.) Energy & nuclear.

Process Description
Through a number of technological procedures, sintered wire mesh is created. To achieve adequate contact at wire mesh intersections, precision woven wire mesh is evenly calendered.Then, under mechanical pressure in unique fixtures inside a hot furnace, one or more layers of this calendered web are laminated. The furnace is heated to the sintering temperature while being surrounded by a special environment of inert gas.The individual wires and each layer of wire have been bonded together after being carefully cooled, making the mesh solid. Compared to ceramics and sintered metal powder/particles, it has more favorable overall characteristics. Sintered mesh filters are very durable.
The filter element, which is simple to maintain and has a long lifespan, can be created without the need for internal assistance.

sintered disc filters consist of highly uniform, interconnected networks of pores with tortuous paths that trap solid particles in gas or liquid. Excellent depth filters with superior mechanical strength. Stainless Steel Type 316L withstands temperatures up to 750F (399C) in oxidizing and 900F (482C) in reducing environments. These filters can be cleaned by other methods, such as ultrasonic baths or reverse flow flushing. If your application requires even greater resistance to corrosion, temperature, wear, and vibration, other nickel-based alloys are available.

Product Introduction


The SUS316L powder sintered filter cartridge is a type of filter cartridge used for filtration in various industries such as pharmaceuticals, food and beverage, electronics, and water treatment.
The L stands for low carbon content, which further enhances its resistance to corrosion and makes it suitable for use in environments that are prone to corrosion.
The SUS316L powder sintered filter cartridge is made by compressing and sintering stainless steel powder to form a porous structure with uniform pore size and distribution. This structure allows forhigh flow ratesand efficient filtration of particles and contaminants from fluids.


Features
1. High filtration efficiency: The multiple layers of stainless steel mesh provide a high filtration surface area, which results in a high filtration efficiency.
2. High-temperature resistance: SUS316L stainless steel can withstand high temperatures, which makes it ideal for applications where high-temperature resistance is required.
3. Long service life: The sintered metal powder structure of thefilter cartridgeresults in a high-strength, durable filter that has along service life.
4. Wide range of applications: SUS316Lpowder sintered filter cartridgesare suitable for a wide range of applications, including in the chemical, pharmaceutical, food, beverage, and water treatment industries.


Applications
SUS316L powder-sintered filter cartridges are commonly used in applications where high-performance filtration is required, and where the filter cartridge needs to withstand high temperatures, pressures, and corrosive environments.


Pharmaceuticals: SUS316L powder sintered filter cartridges are commonly used in pharmaceutical manufacturing processes to filter out contaminants and impurities from liquids, including water, solvents, and drug formulations.


Food and beverage: In the food and beverage industry, SUS316L powder sintered filter cartridges are used to filter out impurities from liquids such as juices, beer, and wine, and to remove particulate matter from cooking oils.


Electronics: SUS316L powder sintered filter cartridges are used in the electronics industry to filter out particulate matter from chemicals and solvents used in the manufacturing of electronic components.

Water treatment: In water treatment plants, SUS316L powder sintered filter cartridges are used to filter out impurities and particles from water, including sediment, bacteria, and other microorganisms.

Description

FLD stainless steel sintered wire mesh pleated filter elements / cartridges are made of woven wire cloth or sintered wire mesh or sintered fiber web.

The pleated filter cartridge has a shape of candle in long and thin. so it is called candle filter/cartridge. The pleated candle filter is made with single or double layer of woven wire mesh, the perforated metal tube as support layer, welded together with bolts and caps on both ends. But some pleated filters are made without perforated metal as supporting layer.

Candle pleated Filter Media:

The Pleated candle Filter Elements are mainly three types: Stainless steel sintered fiber felt; sintered wire mesh and stainless steel woven wire mesh. Stainless Steel Sintered Fiber felt is a kind of durable and pleating filter medium, sintered into a graded pore structure. So the sintered metal fiber felt enjoy the advantages of high porosity rate, large efficiency filtration area, high dirt holding capacity and replaced.

Features and Benefits
1.) Easy replacement;
2.) Corrosion resistance;
3.) Easy clean and reuse;
4.) Large filter area;
5.) High dirt holding capacity;
6.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling;
7.) Low pressure drop due to high porosity;
8.) Long life span;
9.) Low pressure drop and low cost,

Material:

Filter Media Woven mesh or perforated or fiber metal felt, or wire woven cloth are made of stainless steel 304, 304L, 316, 316L, 317L, 904L, & Monel Hastelloy etc.

Structure:
1. The outside protection cylinder made of perforated stainless steel plate protect the filter element from damage;
2. Imported sintered fiber metal felt enjoy supreme filtration and easy cleaning.
3. The pressure resistance of stainless steel tube supporting inside core reach 175 bar.

Applicant:
The stainless steel pleated candle filter/cartridge is used for filtering of hot gas, vapor, liquid filtration, widely used as the below industries:
2.) Petroleum, chemical fiber, chemical industry and electric power;
3.) Pharmaceutics, machinery, metallurgy, ceramics;
4.) Disposal of sewage, foodstuff and beverage, cosmetic etc.


The following parameter will be confirmed before order:
1.) Size;
2.) Work pressure;
3.) Operation pressure;
4.) Material;
5.) Flange standard;
6.) Dielectric;

After-sale service:
1.) Warranty period is 12 months;
2.) Our technology team will support you for forever;
3.) Engineering service is available for your machinery overseas

75um SS 304 porous wire mesh filter cartridge, which is an efficient and durable filter cartridge designed for filtrate treatment and solid-liquid separation. The product is made of high-quality stainless steel 304 material, which has excellent corrosion resistance and mechanical strength, and is suitable for various industrial application environments. In addition, the filter cartridge is designed with five layers of wire mesh sintering plus a support layer, which further improves its performance and stability.

The diameter of the flange interface of the filter cartridge is 140mm, which makes it more convenient to connect with common industrial equipment and pipelines. Whether used as a stand-alone filter cartridge or in combination with other filter media, SS 304 sintered wire mesh filter cartridges provide excellent filtration.

Parameter
Material: SS 304
Size: �?130*500mm
Flange diameter: 140mm
Pore size: 75 um
Layers: 5 layers plus one supporting layer

Features
1.Multi-layer sintered wire mesh plus support layer: The filter cartridge is designed with five layers of sintered wire mesh and one support layer. The multi-layer wire mesh is fused together through a high-temperature sintering process, and a support layer is added on top to form a strong filtration structure. This design not only provides excellent filtration accuracy and uniform pore distribution but also enhances the structural stability and durability of the filter cartridge.

2. High corrosion resistance: SS 304 stainless steel material has excellent corrosion resistance and can operate stably in various acids and alkalis, high temperatures, and corrosive media. Therefore, our sintered wire mesh filter cartridges are suitable for a wide range of industrial applications such as chemical, food processing, pharmaceutical, etc.

3. Easy to clean and maintain: The filter cartridge has a simple structure and is easy to clean and maintain. When the surface of the filter cartridge is clogged, the blockage can be removed by water flushing or backflushing, and the filtering effect of the filter cartridge can be restored. This convenient maintenance method reduces maintenance costs and improves production efficiency.