Sintered titanium powder filter with a flange connector is a kind of porous filter element which is made of industrial high-purity titanium, after sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has excellent properties such as corrosion resistance, high-temperature resistance, high strength, easy to ensure filtration accuracy, and easy regeneration. It is suitable for the filtration of various corrosive media, such as hydroxide, seawater, aqua regia and the filtration of chloride solutions such as iron, copper, and sodium. Product name:Sintered titanium powder filter with flange connector Specifications:OD20 WT2.5-3.0 L200mm Filtering accuracy:30um Connector:Flange connector Packaging: Standard export wooden case or according to the customer's request Delivery: By sea & Air Shipping & International Express Lead time: Generally around 3-7 days for sample,7-15 working days for order, it's according to quantity. Advantage 1, Uniform structure, narrow pore size distribution, high separation efficiency. 2, High porosity, low filtration resistance, high penetration efficiency. 3, High temperature resistance, Normally can be sued up to 280 degrees. 4, Good chemical stability, acid and alkali corrosion, antioxidant properties. Applications 1. pharmaceutical industry, such as infusion, small injections, eye drops, oral liquid the filtration before the end. 2. impurity filter, decarbonization filter and precision filter during the productuon of medicine. 3. Security filter for UF system, RO system and EDI system in water treatment, and filtration after ozone sterilization. 4. Food and beverage industry such as drinks, juice, wine, beer, vegetable oil, mineral water, soy sauce etc.filtration. Packing and Delivery: In order to protect them from rubbing,make them wrapped with plastic bags respectively. kraft paper is used to fasten the plates together,protect them from scattering. Putting the foam in the wooden cartoon to protect them better while shipping. Finally put the goods into wooden cases.
Sintered titanium felt is a kind of porous material created from tiny titanium fibers that have been flattened down and annealed to provide a smooth, flat surface ideal for use in a variety of industrial applications. This unique material has a range of features that make it ideal for use in a wide range of applications. In the production of hydrogen and fuel cells, sintered titanium felt is used as a Liquid/Gas Diffusion Layer (LGDL) in stacks, where it helps to distribute the reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. The material's high corrosion resistance, even under highly acidic and humid conditions, makes it an ideal material for use in these applications. Parameters Material: Titanium Size: 1500 1200mm Fiber size: 20 microns-40 microns Thickness: 0.20mm, 0.25mm, 0.40mm, 0.60mm Porosity: 60%-75% Porosity and size can be customized. Features Porous structure: Sintered titanium fiber felt has an excellent porous structure, which provides high filtration efficiency and large dirt holding capacity. Thermal conductivity: The material has strong thermal conductivity, making it an ideal material for use in high-temperature applications. Precision and aperture control: Sintered titanium fiber felt has precise precision and aperture control, which makes it suitable for use in applications where precise filtration is necessary. Corrosion resistance: The material has high corrosion resistance, even under highly acidic and humid conditions, making it ideal for use in harsh environments. Applications Hydrogen and fuel cells: Sintered titanium fiber felt is used as a diffusion medium, such as Liquid/Gas Diffusion Layer (LGDL) in cathode-fed electrolyzers, where it helps to distribute reactant gases and provide electrical contact between the catalyst layer and the bipolar plate or current collector assembly. Chemical and pharmaceutical industries: Sintered titanium fiber felt is used as a filtration medium, where its high filtration efficiency and precise aperture control are essential in ensuring the purity and quality of the final product. Aerospace and automotive industries: Sintered titanium fiber felt is used in heat exchangers and other high-temperature applications where its strong thermal conductivity and excellent mechanical properties are essential. Water treatment: Sintered titanium fiber felt is used in water treatment applications, such as in wastewater treatment plants and desalination plants, where it helps remove impurities and contaminants from the water.
Sintered Titanium Porous Plate for Water is a kind of porous material with high quality spherical and high purity titanium powder as raw material and it is made rigid by forming and sintering at high temperature. Sintered Titanium Porous Plate for Water has the characteristics of low density, high specific strength, good corrosion resistance and good biocompatibility. Parameters: Materials: pure titanium powder Filter rating: 0.22um-100um Porosity: 25-45% Working pressure: 2.5MPa
Sintered porous titanium plates are a form of material made from titanium powder that has been heated and crushed to produce a particularly porous and light structure. These plates have a high strength-to-weight ratio and are resistant to corrosion and wear. Parameters Material: titanium Porosity: 30%-40% Pore size: 1um-50um Thickness: above 1mm DI: 1MM above Features 1.High Strength-to-Weight Ratio. 2.Corrosion Resistance. 3.Biocompatibility. 4.Customizable Pore Size and Distribution. 5.High Temperature Resistance. Application Chemical Industry: Sintered porous titanium plates are used in chemical processing equipment, such as filters and catalysts, due to their resistance to corrosion and customizable pore size. Medical Industry: Sintered porous titanium plates are used in medical implants and prosthetics such as bone substitutes and dental implants� due to their biocompatibility, strength, and durability. Energy Industry: Sintered porous titanium plates are used in fuel cells and batteries due to their high strength-to-weight ratio and ability to conduct electricity. Environmental Industry: Sintered porous titanium plates are used in water treatment systems and air filters due to their customizable pore size and distribution and resistance to corrosion. Processing The processing of sintered porous titanium plates involves several steps. First, the high purity of titanium powder will be sieved and then mold pressed into a desired shape. Then the material is heated in a furnace to sinter the titanium particles together to form a solid structure. The final product is then machined to the desired shape and size.
Sintered porous titanium plate is a porous material made of titanium powder that is compressed and heated to create a solid block. The block is then treated with acid or other chemicals to remove any remaining impurities and create a porous structure. Product parameters Aperture size: 0.1~3mm Porosity: 30% 60% Thickness: 0.5mm 6mm Specific surface area: 100 1000m2/m3 Tensile strength: 300 600MPa Thermal conductivity: 2 20W/mK Application fields: widely used in aviation, automobiles, medical equipment, biological materials, filter materials and other fields Features 1. Efficient transmission of hydrogen: The highly porous structure of the porous titanium plate enables the effective transmission of hydrogen and has good gas transmission performance, which can significantly improve the efficiency of the water electrolysis hydrogen production system. 2. Lightweight and corrosion-resistant: The porous titanium plate is light in weight and is very suitable for making the transmission layer. At the same time, the titanium material can resist the corrosion of many acidic and alkaline media, and has a long life and stable performance. 3. Easy to clean: The porous titanium plate has a large opening rate and a large surface area, which is easy to clean and handle, and can effectively reduce the pollution of the water electrolysis hydrogen production system and reduce the impact on the environment. 4. Highly stable: The porous titanium plate has a long service life and high stability, and can keep its pore structure and performance unchanged, further improving the stability of the hydrogen production system, thereby meeting various needs of industrial and scientific laboratories. other apps 1. Medical field: Porous titanium plate has good biocompatibility and mechanical properties, and is widely used in medical fields such as orthopedics and dentistry, as artificial bone and dental implants. 2. Energy storage field: The large surface area and pore structure of porous titanium plates make them potential applications in capacitors, which can be used in the manufacture of electronic devices such as batteries and capacitors. 3. Sewage treatment field: The high specific surface area and good catalytic performance of porous titanium plates can be used in the field of sewage treatment, such as the oxidative degradation of organic wastewater and the adsorption of metal ions. 4. Environmental field: Porous titanium plates can be used to clean harmful gases and odorous substances in the atmosphere, and can also be used in environmental protection fields such as seawater desalination and water resource utilization. 5. Aerospace field: The lightweight and high strength of porous titanium plates can be used in the aerospace field, such as manufacturing aircraft, satellites and other components.
A type of titanium fiber sintered felt with high porosity and a pore size gradient structure is known as sintered titanium fiber felt. It has a number of unique functions thanks to the fully interconnected pore structure and three-dimensional network fibers. It is frequently used in the electrolysis of water to produce hydrogen, in hydrogen-powered fuel cells, and in other applications where corrosion resistance is necessary. It is the perfect replacement for the carbon fiber gas diffusion layer in fuel cells. Product parameters Thickness: 0.25mm 0.4mm 0.6mm 0.8mm Titanium purity: 99.9% Porosity: 50-60% Titanium fiber diameter: 30-60 microns Features 1. Lightweight: Titanium fiber felt is light in weight and has excellent strength and rigidity, which can greatly reduce product weight and optimize product performance. 2. Stability: Titanium fiber felt has excellent high temperature, water resistance, corrosion resistance, wear resistance and other properties, not easy to deform, damage, aging, etc., and has a long service life. 3. High strength: Titanium fiber felt has high strength, good tensile, bending and extrusion properties, and can be widely used in various fields. 4. Heat insulation and sound insulation: Titanium fiber felt has excellent heat insulation and sound insulation performance, which can effectively reduce the influence of external heat and noise and improve indoor comfort. 5. Environmental protection: Titanium fiber felt is a non-toxic, harmless and non-polluting environmentally friendly material that will not have a negative impact on the environment and meets the requirements of sustainable development. 6. Easy to process: Titanium fiber felt is easy to cut, sew, staple, press, etc. It can be made into products of various shapes and sizes according to needs, and has high plasticity and adaptability. Applications 1.Petrochemical industry: terminal filtration of petroleum products, filtration of chemical carbon-alkali liquid, filtration of alcoholic organic solution, filtration of heavy coker gas oil, filtration of hydrocracking circulating oil. 2. Fly ash filtering for the chemical sector that uses coal. 3. Decarburization, decolorization, and fine filtration of pharmaceutical intermediates; filtration and separation of precious metal catalysts; purification and filtration of catalytic gases; elimination of impurities from and filtration of raw materials in the pharmaceutical and chemical industries. 4. Filtration following ozone sterilization and ozone aeration, water purification, and removal of mechanical contaminants in the water treatment sector. 5. Clarification and filtering in the food business for milk, drinks, beer, mineral water, vegetable oil, etc. 6. Gas purification using steam, compressed air, and catalyst filtration.
titanium plates are used as filter elements in many fields such as , water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry and gas purification. At the same time, the sintered porous titanium plate can also be used as a gas diffusion layer (GDL) in a new generation of fuel cells (PEMFC). offers porous titanium plates in a wide range of filter fineness and sizes. We can also perform mechanical processing on porous titanium plates, such as chamfering, punching, cutting, etc. Porous titanium plates are widely used as gas diffusion layers in the electrolysis industry. The gas diffusion layer is a key component used in electrolysis cells to transport hydrogen and oxygen to the electrode reaction surface and to transport the electric current generated by the reaction back into the electrolyte. The porous titanium plate has the following advantages as a gas diffusion layer: 1.High gas permeability: The porous titanium plate has uniform pore size distribution and high porosity, which can provide high-efficiency gas permeability, so that the gas diffusion layer has good gas transport performance during the electrolysis process. 2.Good conductivity: The porous titanium plate has good conductivity, which can effectively transport the current generated by the reaction to the electrolyte and improve the electrolysis efficiency. 3.Strong corrosion resistance: The porous titanium plate is made of high-purity titanium metal and has good corrosion resistance. In harsh environments such as strong acid and strong alkali, the porous titanium plate can maintain good stability and durability. Porous titanium plate (sintered titanium plate) specifications Filtration accuracy: 0.22um 100um (0.45um, 1um, 3um, 5um, 10um, 20um, 30um, 50um) Porosity: 30% 40% Pressure: 0.2Mpa/cm2 Temperature resistance: 300 Maximum working pressure: 0.2Mpa/cm 2 Sheet size range: 0.8-2.8mm thickness x
Sintered Titanium Frit well suited for use in Electrolyzers. These frits have a smooth, porous surface (80 micron filter rating) that gives good support for membranes. A much finer surface than our Expanded Titanium Mesh, this product is recommended to be placed against the membrane when designing higher pressure electrolyzers ( 20 psi). Custom sizes are available upon request. Titanium Foam Frit Specifications: Raw Material: Titanium Filter Rating: 80 Micron Thickness: 1.5 mm Working Temperature: 300 C Membrane Filtration Corrosion resistance Why not use a Carbon based Gas Diffusion Layer in an Electrolyzer Carbon based GDL materials will be consumed and converted into CO2 gas in the presence of the Oxygen ions and Voltage found on the Anode (Oxygen) side of the electrolyzer. This secondary reaction of oxidizing the Carbon in the GDL will give temporarily lower electrolysis voltage, but this is a short lived phenomenon. The carbon GDL is quickly consumed, resulting in poor compression in the stack, and thus high resistance and lower performance. You can still used carbon cloth or carbon paper material on the Hydrogen side (cathode) since there is oxygen on that side that will oxidize the GDL material.
Porous titanium foam sintered plate is also called metal powder sintered porous microporous filter material. It is a new type of deep separation and fine filter element made of spherical or irregular metal or alloy powder, which is mixed, pressed and sintered by powder metallurgy. Porous titanium foam sintered plate is a versatile and effective material in the field of heat transfer and heat dissipation. Its high thermal conductivity, resistance to corrosion and oxidation, low weight, and high strength make it a popular choice for a wide range of applications across various industries. Product parameters Name: Porous titanium foam sintered plate Brand: TOPTITECH Filtration accuracy: 0.2um-100um Applicable temperature: 300â?? Size: Customized Product features 1. The material has different pore sizes and filtration precision, the channels are criss-crossed, and the filtration and separation efficiency is high. 2. High temperature resistance and short heat resistance. Suitable for use in the temperature range of 300�°C. 3. Anti-corrosion. It is suitable for deep separation and fine filtration of corrosive media such as acid and alkali. 4. Has certain metal or alloy properties. Energy absorption, noise reduction, heat resistance, shock resistance, cushioning, heat conduction, electrical conduction, high strength and good toughness. Suitable for high pressure environment. Weldable and simple machining, easy loading and unloading. 5. Stable pore shape and uniform distribution ensure stable filtration performance. The regeneration performance is good, and the filtration performance recovers more than 90% after regeneration. Application range Petroleum, chemical industry, metallurgy, aviation, electronics, electric power, pharmaceuticals, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-combat equipment, etc. Such as: seawater desalination, sewage treatment, transformer oil, lubricating oil, fuel oil and other oils, organic solutions, inorganic solutions, medicinal liquids, beverages and other liquids; coarse and fine filtration; various gases, steam dust removal, sterilization, removal of oil mist ; Noise reduction, flame retardant, heat resistance, catalytic reaction, catalyst filtration, gas buffer, sweating and cooling, porous electrode, antifreeze device manufacturing, etc. Package and Shipment 1.� Titanium Plate Sintered Filters� are usually packed in cartons, wrapped in soft film,� fixed in the box filled with industrial foam cotton, and the outer baler is packed with plastic� bags no damage during� transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, and the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
The microporous titanium powder sintered corrugated plate is made of titanium powder after forming and sintering at high temperature, so the surface particles are not easy to fall off; the service temperature in the air can reach 300C; it is suitable for filtering various corrosive media, such as weak hydrochloric acid , sulfuric acid, hydroxide, seawater, aqua regia and chloride solutions such as iron, copper and sodium. Product parameters Product name: Microporous titanium powder sintered corrugated plate Brand: TOPTITECH Porosity: 35-45% Penetrability: 3-800M³/M²hKPa Working pressure: 2.5Mpa Operating temperature: 300C Shape: Round disc, sheet, tube, round bar, cap customizable Specifications: 200mm*150mm*1.0mm (customizable) Filtration accuracy: 0.5 m 0.5um-70um Groove depth: 0.4mm Product Usage 1. Used for matching with stainless steel or titanium filter 2. Orifice plate material for gas distribution fluidized bed 3. Filtration, washing and drying of materials in the pharmaceutical industry 4. Precise filtration of various hydraulic oils and lubricating oils in the machinery industry 5. Filtration of high-temperature corrosive wastewater in the petrochemical industry 6. Recovery of catalyst in catalyst filter 7. High temperature protection facilities on textile instruments and equipment 8. The electrolysis electrode on the hydrogen production device. Product advantages Because the microporous titanium powder sintered corrugated plate has overall heating, no heating inertia, and selective heating, the temperature of the material surface, interior and central area is balanced, the crystal particles are evenly heated, the temperature difference between each part is small, the overall internal structure of the material is relatively complete, and the performance is better. excellent. The main features are as follows: 1. Strong plasticity. 2. Uniform pore size distribution. 3. Long service life. 4. Strong corrosion resistance. 5. High-temperature resistance. Production Process The microporous titanium powder sintered corrugated plate is made by adding high-purity powder into the rolling mill and rolling under pressure. After being rolled and formed by the rolling mill, it is sintered at high temperature in a vacuum sintering furnace.