Sc-c01
Sc-c01(separate pressurized solar collector)
The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style.
Can endure high pressure when it works.
Module design, optional combination, which can meet the demand of large water consumption.
Material: aluminum alloy
Solar vacuum tube with heat pipe
A) size: 58 x 1, 800mm
B) qty of tube: 15 / 20 / 25/30pcs
C) hail resistance: diameter 25mm
Insulation layer in chest
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam
B) heat preservation: 72 hours
Max. Pressure bearing: 0.6mpa
Iso9001 / ce certificate/en-12975
3 years international responsibility for free repairing or exchange due to original quality problems
1, manifold : red copper
2, manifold casing: aluminum alloy
3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m
4, heat preservation: 72hrs
5, hail resistance: 25mm
6, max pressure: 10 bar
7, working pressure: 6 bar
8, coating of vacuum tube: ss-c/cu
9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c
Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system.
High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
Mangoes Juice Machine fruit vegetable process,help people solve the hard thing of mango with big stone/seeds inside,direct out the mango juice,high efficient ,sanitary ,small machine low cost !
Technology : Slag liquid separation, rapid juice extraction. It is suitable for pressing fruits and vegetables with high pressure, and can complete multiple processes such as juice extraction, dehydration, filtration, and pressing at one time
capacity 0.5-1.5T/hour ,power 0.5-7.5kw ,filter screen 0.6mm.
welcome order
Factory price vegetable current cleaning machine
The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching .
Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
The whole production line are made SUS304 stainless steel ,with food safety standards.The use of high pressure bubble cleaning ,when the bubble is released in water,the material will be irregular strong turnover movement ,stirring effect .Effectively separate surface impurities to avoid damage to materials by touching ,knocking and scratching .
Scope of application :clean vegetable processing ,central kitchen ,large dining canteen,catering chain ,food factory ,etc .
2936 Sc C01 Separate Pressurized Solar Collector Suppliers
Short on time? Let Sc C01 Separate Pressurized Solar Collector sellers contact you.
we may offer 3mm/3.2mm/4mm/5mm/6mm tempered solar glass ,
glass mainly used for PV module ,solar collector ,greenhouse ,
solar transmission >91.5%
AR coating max solar transmission>99%
JHG solar glass including texture glass and flat glass, it is the nice performance low iron glass with high solar transmittance, and low reflection. After tempered, it will be the ideal choice for photovoltaics, solar thermal collector, and greenhouse.
Size
Maximum Size:1665*2200mm
Minimum Size: 300*300mm
Specifiction
Main thickness  2-5mm
Dimension tolerance ±1.0mm
Thickness tolerance ±0.2mm
Diagonal tolerance 0.2%
Overall bow & 0.2%
Iron content 110ppm
Solar transmittance  from 91.5-99%
(wavelength rang 380-1100mm)
Hardness 4H
SOLAR GLASS
JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection .
After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse .
Size
Maximum Size:1665*2200mm
Minimum Size: 300*300mm
Specifiction
Main thickness 2-5mm
Dimension tolerance �?�±1.0mm
Thickness tolerance �?�±0.2mm
Diagonal tolerance 0.2%
Overall bow <0.2%
Iron content 110ppm
Solar transmittance from 91.5-99%
(wavelength rang 380-1100mm)
Hardness H
Main glass series
2-5mm Tempered low iron float glass
2-5mm Tempered low iron texure/mistlite glass
2-5mm AR coating glass
2-5mm High hazed tempered glass
2-5mm silk printed tempered glass
Scm
Products detail:
This is a split pressurized thermal collector, adopting vacuum tube heat pipe technology, is widely used for residential water heating, it's easy to install the tubes.
Daily output of each tube is more than 2.6 gal per day. In some southern states, this number can be expanded.
Service life of this collector can be 20 years plus.
More technology data of this product please feel free to find on the products section or you can download our catalog and get more details.
Manifold size 120*105 mm
Pipe diameter / thickness 35/0.8 mm
Interface 32 mm/ 3/4 inch
Material aluminum alloy
Heat pipe 14*70/8*1650 mm
Vacuum tube 58/1800*1.8 mm
Thermal material rock wool
Absorption 94%
Exchange efficiency 42%
Max flux 0.58l/s
Running pleasure 0.6 mpa
Max idle temp 270 degree c
Model number number of tubes absorber area daily output(131 degree f)
Scm15-58/1800 15 pcs 1.95 m2(20.99 ft2) 105-150 l(30-40 gal)
Scm20-58/1800 20 pcs 2.60 m2(27.99 ft2) 140-200 l(40-50 gal)
Organic or conventional Dried Horse Chestnuts in 3 forms: whole, crushed, powder
Medicinal properties of horse chestnut are determined by chemical composition. It contains coumarin glycosides esculin and fraxin, glycosides quercetin and kaempferol, triterpene saponins (escin), tannins, vitamin C, vitamin K, vitamin B1.
Biologically active substances contained in horse chestnut reduce the permeability of blood capillaries, reduce the viscosity of blood and increase the blood pressure of veins and their tone, especially if venous permeability is impaired.
Decoctions from chestnuts are recommended for disorders of the separation of bile, chronic digestive disorders, coughs of various origins and diseases of the upper respiratory tract.
Horse chestnuts are harvested when fully ripe. Dry in a well-ventilated room at a temperature of 25 degrees C or in dryers at a temperature of heating the fruits not higher than 50 degrees C
Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients.
Contact us for seasonal custom collection.
We will provide any additional information upon your request.
Fito-Export, medicinal plant supply partner for your business.
PRODUCT INFO
Lotus leaves is a plant that Thai people have been using for a long time. In addition to bringing lotus seeds, lotus seeds to eat and used lotus flowers to worship the Buddha There is also the use of lotus leaves. Lotus is a plant that Thai people have been using for a long time. In addition to bringing lotus seeds, lotus seeds to eat and flowers to worship the Buddha image. Lotus leaves is an interesting herb, easy to find, economical and suitable for people in modern times who want beauty and health. It helps adjust the mechanism of separating the good parts of digested food onto and the separation of food waste into the lower part causing no accumulation of sputum, moisture.
USES
Thai people in the past and some areas in the present The lotus leaves is used as a medicine for various diseases such as the lotus leaves, which contains many alkaloids. to improve medicinal uses To reduce high blood pressure, bring fresh or dried leaves, cut into shreds, boil with enough water until boiling for 10-15 minutes, drink 1 glass 3 times a day for at least 20 days in a row. Used to suppress cold symptoms. and help reduce phlegm The lotus leaves are cut into shreds and dried in the sun to make smokers to relieve nasal congestion, etc. And there is also the use of lotus leaves. in many ways Wrap fresh vegetables in the refrigerator to preserve their freshness for longer. made into lotus leaves rice make the fragrant rice appetizing
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ
Products intro
Sc-b01
Pipeline is made of all red copper and conducted by heat transfer medium liquid
To save place and simple to install
Suitable for families who can not put vacuum tubes on their roofs
Stable and reliable performance
Fashionable and beautiful
It is harmoniously blended with architecture
Environmental protection and energy saving
* material
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy
C) bracket: aluminium alloy
* solar vacuum tube with heat pipe
A) size: 58 x 850mm
B) qty: 8 / 10 / 12pcs
C) hail resistance: diameter 25mm
* temperature insulation layer
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam
B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters
* max. Pressure bearing: 0.6mpa
* iso9001 / ce certificate/en-12975
* 3 years international responsibility for free repairing or exchange due to original quality problems
An open loop system is for climates where there is no risk of freezing. Recirculation freeze protection can be provided by the recirculation feature in the controller. An open loop water heating system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems.
Products model: sc-s01p»G+dåseparate pressurized solar water heaterp»G+GǦ
Products intro
The separate pressurized solar water heater compose of solar collector, storage tank, controller, working station and installation parts.
Working principle:
1) when the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically
2) the circulation pump makes heat-conducting liquid circulate automatically
3) the heat-conducting liquid transfers heat to water by heat exchanger in the water tank
4) in case the temperature of the water tank does not reach tmax, then start the auxiliary heating device
5) if discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically
Feature:
1) collector separates with the storage tank. The tank can be put anywhere of the house
2) and the collector can be put on both tilted roof and flat roof
3) module design, arbitrary combination, harmony with the building perfectly
4) intelligent control and automatic operation
5) anti-freeze: no water inside the tubes when it works
6) the system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
7) multifunction: bathing, washing, domestic heating
8) workable at anytime and enjoyableouter
Features of separate pressurized system:
* strong hydraulic pressure makes your bathe more comfortable
* modularized collector, arbitrary combination
* intelligent controlling and multiple functions
* arbitrary combination with structure of your beautiful constructions
* separate installation conveniently
* working with assistant resource
* full set of original equipment, the life time will be much longer to ensure better using
* material
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy
C) bracket: aluminium alloy
Cyclone Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dustand other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air purifiers, which use disposable filters to remove dust.
Multiple-cyclone separators consist of a number of small-diameter cyclones, operating in parallel and having a common gas inlet and outlet, as shown in the figure, and operate on the same principle as single cyclone separatorsâ??creating an outer downward vortex and an ascending inner vortex.
Multiple-cyclone separators remove more dust than single cyclone separators because the individual cyclones have a greater length and smaller diameter. The longer length provides longer residence time while the smaller diameter creates greater centrifugal force. These two factors result in better separation of dust particulates. The pressure drop of multiple-cyclone separators collectors is higher than that of single-cyclone separators, requiring more energy to clean the same amount of air. A single-chamber cyclone separator of the same volume is more economical, but doesn't remove as much dust.
Cyclone separators are found in all types of power and industrial applications, including pulp and paper plants, cement plants, steel mills, petroleum coke plants, metallurgical plants, saw mills and other kinds of facilities that process dust.
Pulse Jet Bag Filter
The Bag House/Bag Filter is generic name of Air Pollution Control Equipment. It is designed around the use of engineered fabric, filter tubes, envelopes or cartridges in capturing dust, separating dust or filtration process. AIL provides reliable and highly efficient Bag Filters and Bag House systems.
The dust laden gas enters through inlet nozzle and spreads all over the entire cross section of the bag filter. The gas moves up & passes through the bags, enters the clean air plenum through the top open end of the bags. During the passage of the gases through the fabric, the dust is retained on the outside surface of the bags. As the filtration proceeds the thickness of the dust layer on the fabric surface increases resulting in increase in pressure drop across the fabric. This necessitates the cleaning of the bags. Since the air flow is from outside to inside, the bags tend to collapse and are held by the wire cages, whose shape they acquire. The compressed air passing through the solenoid valves injects air at very high velocity for a short duration. This produces a shock wave causing the bag to expand and dislodging the dust cake which falls into the hopper. This unit is generally meant to operate with a pressure differential of 100-125 mmWG.
This system is combined with solar collector, pressurized storage tank, work station, pipeline etc.
1. Solar collector can be the heat pipe solar collector, the u pipe solar collector, the balcony solar collector or the flat solar collector.
2. Inner tank for pressurized storage tank can be sus304-2b, ss316l or enamel tank.
3. Solar working station.
4. Working pressure :0.6mpa , testing pressure :1.0mpa
Characteristic:
1. No disorder water tank on your roof: split solar water heating systems is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.
2. Perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc.
3. There is an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it.
4. Completely automatic
The heat collectors and the water tanks are connected perfectly, the heat which the panels collected will be stored in the water tank, it guarantees 24 hours per day to provide the hot water, and the system can work even under the -30 degrees. It can supply with a few tons even more water, is an ideal hot water supply system. It is applied to the big hotels, restaurants and other large places.
1: The water tank should be placed higher than the heat collectors, while the models are isolated types and the heat collectors are not pressure-enduring; The water recycled freely by the height difference between the water tank and the heat collectors.
2: The water tank should be placed lower than the heat collectors, while the models are isolated types and the heat collectors are pressure-enduring, the water is recycled by the water pump between the water tank and the heat collectors, the specific pressure-enduring models, please see the information of the pressure-enduring models on the web.
Structure of solar collector:
1. Manifold
2.F58mm heat pipe tube
3.Side track
4.Bottom track
5.Feet holder
Characteristics
1.Water is rapidly heated by the heat pipe.
2.There is no water in the vacuum tube, so the tube will not break in cold climate.
3.The small size of the collector allows for versatile architectonic integration.
4.Collectors can be combined with existing pipeline.
5.The collector can operate even in case of a broken tube. A single tube can, if necessary, be exchanged without interruption of the heating cycle.
