From preserving memories in the form of photos to safeguarding crucial financial information, ARC has been there with you, ensuring the smooth transfer of data and environment. As we move forward, ARC remains committed to providing convenience during moments of change. Beyond our role in protecting and transferring data, we aim to assist you in the decision-making process when choosing a new phone.
Linking two terminals simultaneously
Reading and writing simultaneously allows for a slower connection time, but transfer speed is quicker.
Wireless P2P transmission of media data.
Once the PC is disconnected, large files like pictures, music, etc. can be moved independently from phone to phone.
A wider variety of transmission items
enables a range of smartphone transfer goods.
Linking two terminals simultaneously
Reading and writing simultaneously allows for a slower connection time, but transfer speed is quicker.
Wireless P2P transmission of media data.
Once the PC is disconnected, large files like pictures, music, etc. can be moved independently from phone to phone.
A wider variety of transmission items
enables a range of smartphone transfer goods.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT
DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life.
SPECIFICATIONS
1. Appearance: Off white Granules
2. Solubility: Soluble at 800C
3. Viscosity of 4% solution: 10 to 30 cPs
(Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc)
4. Ash content (w/w) : Max 3%
5. Bulk density (gm/ml) : 0.65 to 0.85
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually sprinkle SizeMagikTM-LP4.
3. Add the required quantity of softener.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
ECONIMICAL ADVANTAGES
Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
2598 Mobigo Solutions Ios Data Transfer Suppliers
Short on time? Let Mobigo Solutions Ios Data Transfer sellers contact you.
99 GOLD DATA
Model Number: SELENA
Place of Origin: Vietnam
Design Style: Modern
DIY: Yes
Application: Inside, Interior Decoration
Light Source: Electric
Power brand: Home-made
Body Material: Rattan
Shade material: Rattan
Body Color: Black, Gold, White, Chocolate
Shade color: Orange, Dark Khaki
Product Weight kg : 1
Product Dimension: 0.5
Lifespan (hours): 3000
Control Mode: Switch Control
Warranty(Year): Other
Lighting solutions service: Lighting and circuitry design, Light drawing and design, Project group sales
Free sample: Sample & packing with customer logo
Product name: Project Pendant Lamp Chandelier
Style: Art Deco
Color: Customized Color
Keyword: Modern Indoor Lighting
MOQ: 200 Pcs
Main material: Rattan
Delivery time: 25-30 Days
OEM/ODM: Highly Welcomed
Feature: Newly-designed
ARC has been there for you, guaranteeing the smooth transfer of data and environment, from preserving memories in the form of images to securing critical financial information. ARC will continue to provide convenience during times of transition as we move forward. In addition to preserving and transferring data, we hope to aid you in making a decision when purchasing a new phone.
ARC has been there for you, guaranteeing the smooth transfer of data and environment, from preserving memories in the form of images to securing vital financial information. As we move forward, ARC will continue to provide convenience during times of transition. Aside from preserving and transferring data, we hope to help you make a decision when purchasing a new phone.
TECHNICAL DATASHEET
EcoTexTM -SL55 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION Powder types unique one-shot product which needs no extra native starch, modified starch, binder, softener, lubricant to be added further. It is mainly used for Shuttle-less loom woven warp yarns counting above the 40s to 60�¢??s Cotton.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 7% solution - 5 to 7
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 4 to 5 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in a cooker
2. Gradually add EcoTexTM-SL55 and min for 2 min.
3. Close the pressure cooker lid.
4. Open the steam value and cook to @ 120�? �ºC or 35psi.
5. Retain in the cooker for 15 to 20 minutes.
6. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fiber penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
The strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 25Kg net weight PP bags with moisture-proof liner inside
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 5% solution - 6 to 8
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually add EcoTexTM-SL20 and mix for 2 min.
3. Add other ingredients and mix for 2 min.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�? �ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : RED SHALE Type Acid Resistant Brick
Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions
Heavy thermal shock
Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick
Characteristic
RED SHALE ACID RESISTANT BRICK
Test Standard
Bulk Density, gm/cc - 2.3 to 2.35
ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968
Apparent Porosity, % -0.5 to 1.75 S 4860
Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279
Modulus of Rupture, PSI -2133 to 3555 ASTM C-67
Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968
Abrasion Resistant , Volume in mm3 -69 to 85 EN 102
Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK
Material : FIRECLAY Type Acid Resistant Brick
Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK)
Specification : ASTM C279, ASTM C410, IS 4860-1982
DESCRIPTION :
* We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required.
FEATURES OF ACID RESISTANT BRICK:
* Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature
AREA OF APPLICATION:
Chemical Analysis (Average)
Acid and Alkali Storage Tank Farms
Demineralization plants and Water treatment plants
Chimney inside lining, FGD linings
Towers and Columns
Process Vessels and Tanks
Sewerage Treatment Plants and Lines
Industrial Flooring and Bund Areas
Chimney and Flue Gas Linings
Hoppers and Chutes
SiO266.4
Al2 0324
TiO21.1
Fe2 O31.1
K2 O + Na2 O2.5
NOT RECOMMENDED:
HF acid or other fluoride solutions - Heavy thermal shock
Characteristic
Fireclay Type Acid Resistant Brick - Test Standard
Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20
Water Absorption, % - 0.1 to 1.8 ASTM C-20
Apparent Porosity, % - 4.05 to 4.14 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279
Modulus of Rupture, Mpa - 14.6 ASTM C-67
Compressive Strength, PSI - 15500 to 17250 ASTM C-67
Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102
Surface Hardness, MOHS Scale - 7
Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236
Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
As we move forward, ARC strives to enhance and simplify the experience of changing phones. Our commitment is to be a reliable partner, offering seamless solutions that go beyond the transfer of your phone book. Join us on this transformative journey, where we aspire to be the constant in your evolving relationship with technology.
My name is Deven from SM recycling solutions,Malaysia.
We can supply automobile scrap.
1.) Automobile Scrap (Automobile Body Cut Scraps)
Origin: Malaysia (Port Klang)
Spec: Fe more than 97% Mn less than 2%
Volume: 1000 metric tons
Shipping terms: FOB/CIF
Payment terms: Bank Transfer(Payment against copy documents)
Our PE Apron/ Gowns provide an effective, low-cost garment solution that protects against dry particulates such as dirt and dust in the workplace. They are lightweight, breathable, comfortable and can be used in a variety of setting such as hospitals, food processing plants and general industrial applications.
* Raw material: 100% Virgin material. It can be made of HDPE, LDPE, and CPE
* With thumb holes and sleeves
* Multi-color for clients to choose
* Other related products: Disposable Aprons, Disposable Gloves, Caps.
Shipping Information:
FOB Port: China (Mainland)
Lead Time : 3 - 30 days
Dimensions per Unit : 120 X 80 X 35 Centimeters
Weight per Unit : 15 Grams Units per Export
Carton : 50 Export Carton Dimensions
L/W/H : 585 X 450 X 420 Centimeters
Export Carton Weight : 11 Kilograms
Main Export Markets:
Asia
Australasia
Central/South America
Eastern Europe
Mid East/Africa
North America
Western Europe
Payment Details:
Payment Method : Telegraphic Transfer (TT,T/T)
Primary Competitive Advantages:
Brand-name Parts
Origin Distributorships Offered
Experienced Staff
International Approvals
Packaging
Price
Product Features
Product Performance
Prompt Delivery
Quality Approvals
Reputation
Service
Small Orders Accepted
Quickly Delivery
High Quality
Globally Delivery
Data transfer between Android, iOS and heterogeneous OS
Support 8 transmission items
2Way support for faster transmission and improved default transmission speed
Support for adding 10 transfer items (18 transfer items in total)
Simultaneous connection of two terminals
Transfer speed is faster than connecting one by one by reading and writing at the same time.
Media data, P2P wireless transmission
Large items such as photos, music, etc. can be transferred from phone to phone separately after separation from PC.
More diverse transmission items
It supports a variety of transfer items on your smartphone.
Simultaneous connection of 2 terminals
Transfer speed is faster than connecting one by one by reading and writing at the same time
Media data P2P wireless transmission
Large items such as photos, music, etc. can be transferred from phone to phone separately after separation from PC
More diverse transmission items
Supports a variety of transfer items on your smartphone
2598 Mobigo Solutions Ios Data Transfer Suppliers
Short on time? Let Mobigo Solutions Ios Data Transfer sellers contact you.
