JRS1(LR1-D) series thermal relay is suitable for using in the circuits rated voltage up to 600V,rated current 93A.AC 50Hz or 60Hz for over-voltage protection of AC motorú«The relay has the differential mechanism and temperature compensation and can plug in CJX2(LC1-D) series AC contactor, also be independtly fixedú«
Specification: LR1-D09, D40,D63,D80
Rated voltage: 220, 380, 415, 440, 660V
Rated current: 0. 1~0. 16, 0. 16~0. 25, 0. 25~0. 40, 0. 40~0. 63, 0. 63~1, 1~1. 6, 1. 6~2. 5, 2. 5~4, 4~6,
5. 5~8, 7~10, 10~13, 13~18, 18~25, 23~32, 30~40, 38~50, 48~57, 57~66, 63~80A
JR28(LR2-D) series thermal relay is suitable for using in the main circuits rated voltage up to 660V,rated current 93 A, AC 50Hz or 60Hz,for over-voltage protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in CJX2(LC1-D) series AC contactor, also be independently fixed.
Specifications:
LR2-D13, D23,D33
JRS2(3UA) series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz,voltage up to 690-1000v,current up to 0.1-400A under 8-hours duty or uninterrupted duty.
Several functions provided by these relays are: phase-failure protection, temperature compensation, ON/OFF indication and manual/automatic reset.
The relays can be mounted onto contactors or installed as single units.
SOLAR GLASS
JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection .
After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse .
Size
Maximum Size:1665*2200mm
Minimum Size: 300*300mm
Specifiction
Main thickness 2-5mm
Dimension tolerance �?�±1.0mm
Thickness tolerance �?�±0.2mm
Diagonal tolerance 0.2%
Overall bow <0.2%
Iron content 110ppm
Solar transmittance from 91.5-99%
(wavelength rang 380-1100mm)
Hardness H
Main glass series
2-5mm Tempered low iron float glass
2-5mm Tempered low iron texure/mistlite glass
2-5mm AR coating glass
2-5mm High hazed tempered glass
2-5mm silk printed tempered glass
India Thermal Power THERMAL OVERLOAD RELAY ZB32-1.6
Dongfang Yoyik Engineering Co., Ltd is located in Deyang, Sichuan, provides different kinds of industrial products and brands. Our company is specialized in researching and developing hear-resisting and wear-resisting materials. As a pump and valve manufacturer ourselves, we also offer other brands both domestic and from abroad.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-THERMAL OVERLOAD RELAY ZB32-1.6-DF
Spare Part Kit DN50
three screw pump ACG070K7NVBP
Pressure filter element HP065-1-A10AN
rtd thermocouple WRNK2-331
thermocouple wzpk 230 pt100 TE-107
Gasket item 6 2730-13-02
mechanical seals DZXB870-R67
screw pump diagram 3GR30X4W2
STEM D74.16B
thermowell TE-108
dc screw pump 3GR30X4W2
axial piston pump PVH131QIC-RSF-13S-11-C25-31
centrifugal pump parts DFB100-65-230
vacum pump air vacuum KZ100-WS
pump screw ACF080K5IVBP
Accumulator HOPPECKE 3 OSP.HC105
Platinum Wire WRNK2-191M
vacuum oil pump ZS-185A
rotary vane pump F3V10-1S6S-1C20
Thermocouple Assemblies WRKK2-221
three screw pump 3Gr70Ã??2
thermocouple protection tube WRNR2-12
solenoid valve 24EI1-H6B-T
pressure hose SMS-10/12-305mm-C
pt100 rtd probe thermowell TE-205
thermocouple cable WRKT2-11
THERMAL OVERLOAD RELAY ZB32-1.6
thermocouple thermometer WREX2-001
electric oil transfer pump 50IY50A
solenoid relief valve DBW10B-1-30/100UG24NZ5L
Check valve 216C15
o-ring 140X3.55
EH oil feeder D1000A-690500B
screw pump working principle HSNH280-43N7
3 wire thermocouple WREKD2-04
manual vacuum pump 30-WS
thermocouple k WRNN2-4325
hydraulic vane pump F3-SDV10-1B7B-1A
THERMOMETER WTY-1021
electric centrifugal pump head SDH200-150-315
type k thermocouple WREK2-294
screw pump working 3GR30*4
Globe valve J61Y-100 DN25
HYDRAULIC PUMP PD060PC02SRS5AAM0E1200000
bellows globe valve core WJ40F1.6P.03
Filter element BR110+EF4-50
Network Switch EKI-2528
vacuum pump 265v P-2332
rotary vacuum pump P-1964-1
Ignition set XDH-20C
rotary piston pump PV2R3-76-RBAF1
fuel pump YH50-32-160
axial piston pumps PVH074R01AB10A2500000001E010A
electric vacuum pump P-2335
THERMAL OVERLOAD RELAY ZB32-1.6
DFYL-2022-3-8-ZYR
3961 Jrs1(Lr1 D) Series Thermal Overload Relay Suppliers
Short on time? Let Jrs1(Lr1 D) Series Thermal Overload Relay sellers contact you.
ALUMINA MORTAR (Test Certificate)
General Properties
A. Max service temperature - 1500 oC
B. Maximum grain size - 0 - 1.5 mm
C. Water required for mixing - 22 - 30%
D. Setting - Airsetting
E. Sintering Temp - 1550 oC
Chemical Properties
A. Al2O3 - 50.00%
B. SiO2 - 31.00%
c. Fe2O3 - 5.00%
D. LOI - 7.00%
Physical Properties
A. Dry Density - kg / m3
B. CCS - 17 kg / cm2 after drying at 110C / 24 hr
C. MOR - 20 kg / cm2 at 110 oC/ 24 hr
18 kg/cm2 at 800 C/ 3 hr
Thermal Properties -
A. Refractoriness ( Orton / C) - 31.5 orton cone/1699 oC
Packaging - 25 - 50 kg bags
Storage Life - 12 months
Delivery State - Dry
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries.
Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace.
As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc.
Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron
The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit..
Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks
Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel.
The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
Professional Honey Bee Tools Nuc Box Metal Entrance / Plastic Beehive Entrance
Basic Information
Place of Origin:
China
Brand Name:
Super-sweet
Minimum Order Quantity:
1000
Packaging Details:
beehive disc entrance for beehive tools 1. Standard Package. 2. at your request
Delivery Time:
5 working days
Payment Terms:
L/C, D/P, T/T, Western Union, MoneyGram
Supply Ability:
100000 Piece/Pieces per Month
Product Description
Bee Hive Nuc Box Metal Entrance Disc Enter For Bee Plastic Entrance Gates
Products Name: plastic beehive entrance
Material : metal
Weight:17g/pc
Diameter:7cm
Color: green,white
Company Information
1. We are the professional manufacturer of beekeeping equipment tools specialized in designing, researching, developing molding and producing, selling and exporting various beekeeping supply. We have a complete set of mold development and production equipment, and provide various and new beekeeping devices for all beekeepers.
Input Voltage 12V / 24V DC optional
Output Voltage 115V / 230V AC optional
Portable power for AC products, AC outlets for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency converts virtually all of the battery's power to AC
Mounting brackets for convenient installation
Heavy duty stud-connection mounting
RS232 communication port
WIFI/BMS Optional
Overload and over temperature shut down
Low voltage and over voltage alarm/cut off
Input reverse protection
Short circuit protection
PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter,
outdoor electricity and other occasions.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
3961 Jrs1(Lr1 D) Series Thermal Overload Relay Suppliers
Short on time? Let Jrs1(Lr1 D) Series Thermal Overload Relay sellers contact you.
