1. Our company could supply all spec premium liners and ceramic liners used in various brands of mud pumps.
2. Our premium liners are made of a forged steel outer shell and a high chromium iron inner sleeve. The out shell is centrifugally forged with high quality carbon steel, with Tensile Strength > 610Mpa, Yield Strength > 450 Mpa, Elongation >17%, Hardness HB -180-200; The inner sleeve is centrifugally forged with high chrome iron alloy, with Hardness over HRC62 after heat treatment. Each liner is machined to close tolerances to assure ease of installation and long liner life with the inside diameter of these premium liners honed to a mirror-like finish for smooth even wear during the life of the liner. It could serve more than 800 hours.
3. Our ceramic liners are made of a forged steel outer shell and a ceramic inner sleeve. We can supply Zirconia(ZrO3) sleeves as well as Alumina(Al2O3) sleeves. The ceramic liners are mainly used for well drilling and geological explorations especially widely used in harsh oil mining environment, offshore well&gas exploration etc. It serves a 5 to 10 times longer life than metal products, and will cut down the mining cost of more than 50%.
Lakes mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
The outer sleeve of Rundongs bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the liners flexural strength() is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance.
The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc.
Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc.
In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump.
The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication.
The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water.
This pump has a complete set of special tools for general maintenance & repair.
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Ceramic Liner
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company.
The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
1. With stainess steel cup warmer function
2. Automatically alarm water and bean shortage
3. Automatic tip for full coffee grounds tank
4. Various beverage parameters can be customized for this coffee machine
5. Automatic memory the number of beverage
6. Automatically rinsing when turn on and off
7. 6 grades adjustable bean grinding system
8. Double water pump, double boiler heating system
9. High-definition touch colorful screen function
10. 10.1 inch color screen touch operation function
11. With making 16 kinds of beverage in six languages
12. External barreled water and pressurized water source device can be connected
13. The function of producing coffee and fresh milk simultaneously
14. It can be customized during the production process
Voltage/FrequencyAC220-240V/AC110-120V, 50/60HZPower1300W
Brewing Unit Capacity9.5-13.5gWater Tank Volume3.5L
Bean Tank Volume1000gGrounds Tank Volume20PCS
White Paper Cuttings, OCC/WASTE PAPER
Type
OCC
Product name
OCC Premium (OCC 11)
Types
Old Corrugated Cartons (OCC)
OCC Paper Scrap
OCC 11, OCC 12
Color
Brown
Feature
Mixed & NOT MIXED
Moisture
8-10%
Throw
4-5%
Waste Paper scrap
corrugated containers having liners of either test liner or kraft
Packing
1.2-1.4 TONS/ BALE
Application
Recycling
Product Name: Soya Lecithin
"Type: Food Additives
Origin: China
CAS No.: 8002-43-5
AUCO No.: 100
Packing: 200kg drum"
Appearance Yellow to brown translucent,viscous liquid
"Odor
" little bean flavor
"Taste
" little bean flavor
Insoluble in Acetone â?¥60%
Peroxide value, mmol/KG â?¤5
Moisture â?¤1.0%
Acid value, mg KOH /g â?¤28
Color, Gardner 5% 10-11
Viscosity 25â?? "8000-10000 cps
"
Ether insoluble â?¤0.3%
"Toluene/Hexane Insoluble
" â?¤0.3%
Heavy metal as Fe Not detected
Heavy metal as Pb Not detected
"Total Plate Count
" "100 cfu/g max
"
"Coliform Count
" 10 MPN/g max
E coli (CFU/g) Not detected
Salmonlia Not detected
"Staphylococcus Aureus
" Not detected
Product Description
Potassium Formate is chemically represented by the formula KCOOH. Potassium Formate is available as stock, clear fluid which can be used in workover and completion operations that require a density to 13.2ppg(1.58SG) and a base liquid for drill-in fluids. Formate-base brines are considered to have better HSE characteristics than chlorides and bromides brines for many applications. Although more expensive than alternative brines, potassium formate brines show excellent thermal stabilization effects on natural polymers and the potassium ions provides excellent clay stabilization and swelling inhibition of shales. Sodium formate is available as a dry-sacked material and as a stock liquid.
Applications/Functions
Used in workover and completion operations that require clear fluids with a density up to 13.2ppg
Used as a base liquid for drill-in fluids
Widely used in slim hole drilling, horizontal wells, branch hole drilling and stringent environmental requirements area
Advantages
Excellent clay stabilization and swelling inhibition of shales
Compatible with other drilling fluids additives
Saturated solution is 76% w/w and readily soluble
Low activity of aqueous solution provides enhanced hole stability
High core permeability with minimal reservoir damage
Environmentally friendly product
Typical Properties
Appearance: Clear liquid or white crystal; Specific gravity of solid: 1.91; Solution pH: 9-11;
Solubility in water: 310g/100ml water at 77�°F
Recommended Treatment
Drilling conditions and mud system requirements dictate concentration levels
Package
1 MT BIG BAG or 1000L IBC TOTES
100% interchangeable with the most common brands of mud pumps.
Long lasting service life up to 4000 hours.
Could be used around 7500 psi of working pressure.
Also provide reliable Liner packing Seal Rings.
Customized Liners according to drawings can be produced, too.
1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules
and Accessories, Valve and Seat for all major brand mud pumps.
2.Mud Pump: EMSCO,3NB
3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments
Coupling Application Machine etc.
4.We also offer custom design-built service per our clientâ??s drawings and specifications.
Model PZ-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance.
The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc.
Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc.
In order to prevent the water-hammer and reduce pressure difference in the outlet side,there fixed a discharge pulsation dampener in the discharged manifold of the pump.
In order to prevent the over-pressure, there fixed a shear safty valve in the outlet side of the pump.
The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication.
The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water.
This pump has a complete set of special tools for general maintenance & repair.
Quick Information
Brand Name:SaigaoPlace of Origin:China:
Description
We are Saigao group can do piston and Plunger pump. Such as the following:
BW Series Mud Pump
BW Series Mud Pumps are mainly used for supplying flushing fluid to the borehole in core, geothermal, water resource, shallow oil, CBM and other drilling process. The fluid can be divided into mud, water, etc. They also can be used as transfer pumps of the above-mentioned medium. This series of mud pumps are with simple structure and easy to maintain and operate. Piston, lip-shaped and self-sealing type, is made of rubber or PTFE and nylon pads, equipped with shock-resistant pressure gauge, necessary spare parts and special tools. Bi-metal liner can be used to extend service life of pump greatly.
NBB Series Mud Pump
NBB Series Mud pumps are mainly used for the core, coal geology, metallurgy geology, hydrogeology engineering hole drilling fluid is supplied, flushing fluid can be divided into mud, water, etc., may be used as the above medium pump.
Structural features
The mud pump is crank structure, horizontal triplex single acting piston pump, the piston is self-sealing lip, made of rubber or PTFE and nylon protective pads pressed, the pump adopts auto gearbox, variable five kinds of flow, the pump is compact, high efficiency, durable, safe, reliable, easy maintenance, low maintenance costs.
ZB Series Grouting Pump
ZB Series grouting pumps are mainly used for kinds of weak corrosivity viscous and nonviscous liquid grouting(such as water, mud), especially for vertical shaft working face grouting, goaf filling, coal mine water inrush governance and so on.
The pump is triplex single-acting plunger high pressure pump, fitted with international first-class gearbox, which is of features like compact structure, multistage speed regulation, realizing different flow rate and pressure, meeting the grouting requirements of different formation. Electric motor drives triplex pump through transmission system. It has many advantages, like convenient adjustment for pressure and flow rate, long service life and so on.
3NB & 5NB Series Mud Pump
3NB & 5NB Series Mud Pumps are mainly used for oil, water well, geothermy, CBM, shale gas, coalfield exploration, freezing well as well as well other drilling ,well cementation, work-over and other operations in industrial and mining enterprises. It is used for transferring mud, clay gum, mortar and other medium to the borehole. The pump adopts international advanced technology. It is characterized by advanced structure, reliable operation, good suction performance, long service life of wearing parts, easy for maintenance and repairing and so on.
F Series Mud Pump
F Series Mud Pumps are mainly used in oil field and geological prospecting for well drilling, well work-over, cementing, water shut off, water flooding and sending mud, clay, grout and so on.
1. Module is made from 4135 alloy steel with strict forging and heat treatment process, or Ceramic (Zirconia and Aluminium Oxide).
2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Valve Assy, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more.
3. Three types of Liner: High chrome sleeve, single shell, zirconia ceremic liner.
4. Pony rod and piston rod is made of premium quality, heat treated alloy steel.
5. Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat .
Lakeâ??s mono-metal liner has its inner bore quenched with the carburized layer thickness as 1.5 to 1.8mm to achieve hardness of 58 to 60 HRC. The liner features high hardness, great corrosion resistance, no deformation and high surface finish. It can be applied on Gardner Denver duplex pumps such as FY-FXD7-1/2X10 series, FC-FXX5X8 series, FD-FXX5X10 series and FG-FXG5X6 series, etc.
Bi-Metal Liner
The outer sleeve of Rundongâ??s bi-metal liner is made of forged carbon steel and features great wear resistance, while the inner sleeve is made of high-chromium alloy cast iron and features great resistance to wear and corrosion. Through thermal treatment, the inner sleeve reaches hardness of 61 to 64 HRC. In general, the service life of our bi-metal liner is 800 hours. The liner has won a great reputation among many oil fields.
Our ceramic liner is made of toughening zirconium oxide with fracture toughness (K) ranging from 10 to 15 Mpa, which is about 10 times of that of traditional ceramics. In addition, the linerâ??s flexural strength(�?) is ranging from 600 to 800 Mpa, the Weibull modulus is 18m and the elasticity modulus (E) is 200Gpa. The ceramic liner features excellent resistance to wear and corrosion. Its average service life is longer than 3,000 hours, which significantly reduces the cost of well drilling.
