Fully automatic block machine is fixed, platform vibration type, mechanical deform, the machine design is advanced and reasonable, the application range is wide, adopt the reducer, the brake think magnet curved arm around the mold.
The machine adopts 4 upright posts, accurate positioning, stable mould balance, high density of brickwork, small rough edges and good appearance.
Fully automatic block machine automation is very high, do not artificially add material, labor intensity is also very low.
Vertical vibration of table, pressure head vibration, good forming effect.
Using the assembly type mold box, the wearing parts can be replaced, the mold maintenance cost is less.
Unique broken arch device, suitable for wide range of materials.
The fully automatic block machine is mainly used for the construction of the building, the road railway, the bridge and the ancient building, the reinforced concrete protective layer pad, the beam support, the reinforced layer spacing standard block support, etc.
Cement reinforced protective layer pad quality, directly related to the bearing capacity of steel bar in concrete engineering structure. The durability. Resistant to acid and alkali. The situation such as fire prevention, the construction quality plays an important role.
In building materials, the application of block machine is very extensive.
In the construction process, the cement block can be used as the protective layer of other items, especially the reinforcement, so the quality of the cement block must be reliable.
The fully automatic block machine is mainly used for the construction of the building, the road railway, the bridge and the ancient building, the reinforced concrete protective layer pad, the beam support, the reinforced layer spacing standard block support, etc.
Cement reinforced protective layer pad quality, directly related to the bearing capacity of steel bar in concrete engineering structure. The durability. Resistant to acid and alkali. The situation such as fire prevention, the construction quality plays an important role.
In building materials, the application of block machine is very extensive.
In the construction process, the cement block can be used as the protective layer of other items, especially the reinforcement, so the quality of the cement block must be reliable.
Block machine production and processing provides the convenience for us, we all know that hydraulic cement block machine working environment dust is bigger, the dust into the equipment, will accelerate the abrasion of equipment, especially the hydraulic system, so we need to regular cleaning and replacement of hydraulic oil in the hydraulic system.
Many customers will ask how long does it take to change the hydraulic oil of the cement pad machine?
Generally, we stipulate that we should replace it in about three months, but if the hydraulic oil pollution is serious, we need to replace it in time.
What do you need to pay attention to the replacement of hydraulic oil for automatic pad block machine?
Here is the manufacturer's introduction.
We want to change the hydraulic oil, we should choose the quality of the hydraulic oil, the regular manufacturer, the instruction and the quality license, etc.
2. After the original hydraulic oil is cleaned, we should clean the tank.
3. Before replacing, make sure all the original parts of the hydraulic system are installed and then add new hydraulic oil.
4. Turn the pump shaft manually under the correct rotation direction and fill the hydraulic system with hydraulic oil.
After looking at the notice of replacing the hydraulic oil mentioned above, we can operate correctly in the future operation, so that the machine can't work properly because of improper operation.
Need to know more about fully automatic block machine knowledge, can pay more attention to our website.
Fully automatic block machine is fixed, platform vibration type, mechanical deform, the machine design is advanced and reasonable, the application range is wide, adopt the reducer, the brake think magnet curved arm around the mold.
The machine adopts 4 upright posts, accurate positioning, stable mould balance, high density of brickwork, small rough edges and good appearance.
Fully automatic block machine automation is very high, do not artificially add material, labor intensity is also very low.
Vertical vibration of table, pressure head vibration, good forming effect.
Using the assembly type mold box, the wearing parts can be replaced, the mold maintenance cost is less.
Unique broken arch device, suitable for wide range of materials.
173960 Automatic Block Machine Suppliers
Short on time? Let Automatic Block Machine sellers contact you.
Automatic block machine(QT4-15B)
(1) Main technical parameters
Dimension: 2440í-2000í-2600mm
Host machine power: 27KW
Moulding area: 400í-800mm
Vibration force: 40KN
Moulding period: 15-20S
Capacity: 70.25KVA
Pallet Size: 1010í-550í-20/25mm
Mixer model: JS500
Total Weight: 7.6T
Water Consumption: 5T/every day
Voltage: 380V
Theoretical workshop area : 150m2 , need about 6-7workers .the office,curing area and stacking area to arrange according your fact status.
Brief Introduce of QT10-15 automatic cement brick making machine
Brief Introduce of QT10-15 automatic cement brick making machine
1. Particular storage and description material system insure the feeding accuracy and avoiding the effect of exterior material. So the products have high density.
2. Adopting synchronization vibration insures the products making average. The frequency can change according to different technics. Low frequency in feeding material, high frequency vibration makes the different material to have a optimal vibration way.
3. The computer is of fault diagnosis system, it can achiev Warning signal is propitious to eliminate the fault. Combine with long-distance controlling system e scrutiny, controlling, diagnosis.
QT4-18 cabro brick machine hollow pot block machine for sale
1.Brief Introduction
QT4-18 concrete block making machine produces various kinds of bricks/blocks, including colorful bricks which are fed with layered material, through-the-body tiles, dock linkage blocks, road's curb bricks, SOD bricks, hydraulic blocks, hollow blocks, perforated bricks, standard bricks and so on.
2.Features:
1)Equipped with PLC with famous brand
2)Hydraulic and full automatic
3)Could be produce so many kinds of block by changing mold
4)Easy operate with PLC control system
3.Technical Parameters of Host Machine
Power 19.95kw
Molding cycle 18-20s
Hydraulic pressure 16-18Mpa
Pallet size 850*550
Machine size 3740*2230*2450mm
Machine weight 3.5T
Land area Shaded area:100-200M2;Stoking area:500-1000M2
Products Hollow/Solid/Houdis/paver/Curb stone and so on
Worker 5-7workers
Equippments Mixer,stacker and so on
4.Product Capacity of Host Machine
Spec Hollow
(400*200*200mm) Holland
(200*100*60mm) 'S'paver
(225*112.5*60mm) 'I'paver
(200*160*60mm) Solid
(240*115*53mm)
Pcs/pallet 4 16 12 12 26
Pcs/hour 720 2304 1728 1728 3744
Pcs/8hours 5760 18432 13824 13824 29952
5.Technical Parameters of Mixer
Model Diameter Size Power Capacity Weight
JQ500 1500mm 11kw 680L 580KGS
6.Loading Machine to Our Client Photo
7.Brief Introduction of Fuda Brick Machine Factory
Fuda Brick Machine Factory is a professional brick machine manufacturer with more than 21 years experience,had been exported our machine to more than 50 countries,such as Congo,Ghana,Peru,Bangladesh,Inida,Guinea and so on.
1)All the machine are could be customized,mold could be customized also
2)Had been certificated by ISO and so on
3)All the mold and machine are should be confirmed well before produce it for u,include the voltage,block design,color and so on
8.Factory Certification Show
9.Our Service:
1)Pre-sale Service
All of us are waitting for your kindly inquire about our machine,and we will be reply u in time,also we could be recommend u suitable machine according to your request,should be guaranteed that u could be choose the best machine u want
2)Sale Service
All of our engineers are waitting for service for u also,supply the block disign and foundation photo of our machine.if have any other problems,will be correct it for u at any time
3)After-sale Srvice
For big size machine,our engineer could be install it for u,for other machine,we could be supply the manual eddition in English also with the operate video and the install video,guaranteed that u could be use it well with right way
More importantly,welcome to our factory for visitting!!!
All of us are waitting for your coming,would like to know more details,
3.Main technical features:
1)The system equipped with PLC control unit includes safety logical module, producing procedure module and fault diagnosis module. Through human machine interface, the long-distance fault diagnosis function can be achieved, thus operators can handle the system smoothly by simple training.
2)Equipped with 4-poster conducting device and mold unit includes cover-mold and base-mold which pressed by each separated hydraulic transmission device and controlled by synchronization unit. Thus, the system so far so durably.
3)Equipped with especially-designed feeding unit including pendulum fork to remove the raw material effectively and evenly.
4)Equipped with hydraulic transmission unit which assembled of high quality elements manufactured by world famous supplier.
5)Using independent hydraulic integrated station, it can avoid the influence of hydraulic system from the vibration of the main engine to guarantee hydraulic system working reliability.its low frequency condition for vibration and high frequency condition for forming so that products can reach satisfied density and uniformity.
6)The system can produce concrete masonry units with a great many specifications by replacing different molds.
4.Options
1)Board stack system: system can stack the board 3-8 tiers for different productions.
2)Secondary feeding system: system can feed colorful raw material to produce many kinds of polychrome pavers and other special products.
3)Molds for other shapes block.
4)can be fully automatic by adding necessary equipments
5)face color device(layered material feeding)for making color paving block.
5.Advantages:
Short cycle time
Advanced technology, integrated vibration, hydraulic system
Good welding techniques, strong structure
High intensity mould vibration, good density and uniformity of brick
Plc intellectual control, make sure integration and accurancy.
equipped with complete logic control, production program, malfunction diagnosis system and remote control function. So it doesnt need a professional person but only need a simple trainning to the operator.
Fujian Vinking Machinery Co., Ltd is located in Quanzhou, the first East Asian cultural capital. We are committed to forming, curing and packaging high end concrete product. we have gathered the best technology and productivity from home and abroad to provide customers with better solutions.
With expertise, we are committed to creating value for our customers and users. In the era of intelligent manufacturing, we are committed to providing more professional, more efficient and more economical modern automatic solutions for our customers and users around the world.
With an open and win-win attitude, we have worked with many partners around the world to build a smart ecosystem ,drive technological breakthroughs and innovations in precast concrete industry.
Quanzhou, as the starting point of the Maritime Silk Road, is also where Viking to start.
Condition:New
Type:Hollow Block Making Machine
Brick Raw Material:Concrete
Processing:Brick Production Line
Method:Vacuum Extruder
Automatic:No
Capacity:4000-5000 pieces/ day
Voltage:220V/240V/380V/415V
Power:23.5KW
ntroductionï¼?
Our company is committed to building a national first-class manufacturer of pad machine equipment. The cement pad machine produced is sold all over the country with good service and high quality.
The cement pad machine produced by our company is able to stack and save a lot of supporting plates because of the reasonable pressure and vibration matching, the products are beautiful and the strength is good.
Due to the superior performance of the pad machine, it has been well received by users and is the first choice in the
1. The hydraulic system of our Brick machine is designed with double loops and double pumps, which adopts professional combined valves to realize the working cycle of filling, air discharge, pressing and de-molding
2. The hydraulic oil tank of our Brick machine is designed with automatic oil heating and cooling systems and oil purification devices, which adopts repeated continuous filtering to ensure the optimal working conditions of hydraulic oil.
3. The cart of automatic material box of our Brick machine adopts positive feed pattern with forced mixing mechanism so as to ensure the average cloth and efficiency.
4. Our Brick machine adopts PLC Siemens controller and man-machine interface, and the whole machine can be operated automatically.
5. The molds can be replaced for the production of standard bricks, blind-hole bricks and hollow bricks with different specifications.
Main Technical Parameters
Type: DYS430
Max work pressure(KN): 4300KN
Max oil pressure in the hydraulic system (Mpa): 29.5Mpa
Installed capacity(Kw): 44Kw
Quantity of solid bricks/time 240X115X53mm: 12pcs
Quantity of hollow bricks/time
240X115X90mm(hollow rate:25%): 6pcs
Automatic setting machine/time(standard brick): 48pcs/time
Output/unit/h(based on solid bricks): 3600-4300pcs/h
Annual output: 24-28 million purchase.
International standard container.
173960 Automatic Block Machine Suppliers
Short on time? Let Automatic Block Machine sellers contact you.
