(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification.
Size & Diameter can be customised as per buyer's requirement.
VOC REMOVAL BLOCK - Activated Carbon filters effectively Removes Volatile organic compounds (VOC) from water causing irritation in the eyes, nose, and throat, headaches, loss of coordination, and nausea. RO does not provide the adequate removal of VOCs. The adsorption properties of the activated carbon filter suit to remove the carbon-based VOC. No better defense mechanism against VOCs is offered than carbon as active carbon based on coconut shell is microporous and micropores can only house them suitably. To enhance the adsorption capacity of active carbon block we provide modified active carbon with nano alumina. These VOCs Blocks can be manufactured in different size for different applications.
Size & Diameter can be customised as per buyer's requirement.
CHM REMOVAL BLOCK (Heavy Metal Removal) - Heavy metal (HM) is any metallic chemical element are highly toxic for both animals and human beings, and can be bio-accumulated through biological chains and are non-biodegradable and persistent. Their toxicity may occur due to industrial emission that contaminates waterways, nearby streams and rivers, contamination of irrigation water, the application of fertilizer and metal-based pesticides, harvesting process, transportation, storage, or sale.
Elements, such as Cadmium and Chromium, are considered carcinogenic, while Iron, Copper, Manganese, Zinc, and Nickel are considered essential trace elements. Arsenic is also another heavy metal which is available in almost 70% bore well water. Therefore, it is essential to purify the water to make it potable. The conventional methods for heavy metal removal from waste water which includes chemical precipitation, reverse osmosis, and solvent extraction are expensive. Adsorption on adsorbent such as active carbon or modified active carbon is an alternative method, because it is cost effective and simple to design.
Size & Diameter can be customised as per buyer's requirement.
To suit the requirements of water purification, modern approach is to filtering huge volumes of water contaminated with many organic and inorganic contaminants but in form of blocks along with reverse osmosis, UV irradiation, mineral addition, etc. Carbon blocks are engineered and manufactured using compression molding or extrusion for different applications such as dechlorination, bad taste and odour removal, chloramines and organic materials removal, VOC removal, heavy metal removal, etc. Carbon blocks provide effective and versatile filtration for a wide range of different applications such as sediment and chemical removal.
- Manufactured from coconut shell based low ash, micro porous Activated Carbon.
- Designed to be used in most standard size housings.
- High adsorptive capacity & high Iron, HMR & VOC removal Capacity
- Simultaneously removes chlorine, bad taste, odour and organic contaminants from water.
- Provides particular filtration and high dirt capacity.
Size & Diameter can be customised as per the Buyers requirements
Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm.
Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
28633 Activate C T O Carbon Blocks Suppliers
Short on time? Let Activate C T O Carbon Blocks sellers contact you.
Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
IRON REMOVAL BLOCK - Iron is one of the major problem in ground water of many areas in India. Excessive levels of iron above 0.3 mg/l in water, may lead to many problems in usage and also adverse health effects. Iron will be in the form of Fe2+, Fe3+ and as few more other compounds in dissolved state in water. Iron imparts color in water if it is excessive, which leads to aesthetic effects in water. If it is used for laundry application, affects the color of the white fabric.
Size & Diameter can be customised as per buyer's requirement.
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc
Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Packing
25kg PVC bags+1MT big bag or as customers'requested
Trade terms
FOB CNF CIF
Payments
terms
1).T/T 30%advance ,
2).the balance against copy of B/L
Delivery time
After we receive deposit within 7-10days
Sample
Sample is free within 1kgs
Name of product-Coconut shell Activated carbon/ Activated carbon/Activated carbon for Gold recovery/Activated carbon for water treatment/Activated carbon for Gas treatment
Key Specifications/Special Features: Iodine- 900 to 1400 , CTC - 45 to 100 we can able supply
Mesh Size: 4x8,6x12,8x16,8x30,12x40,12x30,20x50,30x60,50x100,50x200, below100 Mesh, 90% Pass Below 200 Mesh, minus 325
This product uses high quality apricot shell, hickory shell as raw material, using excellent technology for carbonization,
activation, refined processing. This product is black unshaped particles, with developed pore gap structure, has a good
purification of drinking water efficiency, can remove the water odor, odor, chlorine, phenol, mercury, lead, arsenic, cyanide and
other harmful substances, is to fill families, social groups, hotels and advanced purification water production equipment thinking
material.
Granular activated carbon is defined as the activated carbon being retained on a 50-mesh sieve. GAC products are made from coconut shell, coal, lignite, and anthracite products. Adsorption is the primary mechanism by which GAC works and the primary reason it is widely used to reduce undesirable taste, odor and color and to improve the safety of drinking water. Coconut granular activated carbon is mainly used for gold recovery. And 4*8mesh coconut shell activated carbon is usually applied for some heavy metals removal from the waste gas. According to different applications, clients can choose different activated carbon types according to the specific working conditions.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.
Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.
Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder.
HiraChem is your specialist supplier of Granular Activated Carbon.
Pure carbon which is gold recovery granular activated carbon is coconut-shell-based granular activated carbons specially designed for gold recovery operations. GR was developed to be a consistent, high performance, high activity gold recovery carbon product line. The activated carbon's ability to achieve high gold loadings and the relative ease with which they can be stripped enables gold processors to obtain the highest possible yields from ores with high silver/gold ratios, carbonaceous ores and ores containing other metals that complex with cyanide; for example, copper and nickel. In Carbon in Leach (CIL), Carbon in Pulp (CIP), and Carbon in Column (CIC) circuits, it is essential that the activated carbon employed provides excellent process performance, minimal losses due to attrition, and minimal maintenance problems.
Through the years, Pure carbon has continually upgraded its manufacturing processes to ensure that it continues to provide high quality products. Steps have been added to the manufacturing process which have improved the carbon's resistance to abrasion and reduced its tendency to plug retention screens in adsorption tanks. Platelets (flatter granules which are relatively long and wide while not particularly thick) can end up oriented in such a manner that they pass through the retention screens. This results in a loss of gold-containing carbon, which directly affects percent recovery and pro stability. In order to have a product that has less tendency to plug screens with "platelets," GR is also processed through a vee-wire screen and deÃ?Âdusted. GR products are manufactured specifically for gold adsorption. As a result, the quality of the carbon is extremely consistent and tailored to gold recovery applications. GR activated carbon enable the extraction of even trace amounts of gold from every ton of ore, even when processing average or low-grade ores. Pure Carbon expertise in activated carbon application technology is a valuable resource for designing and optimizing.
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water.
Additional applications include:
* Pharmaceutical
* Oil & Gas
* Drinking water treatment
* Groundwater remediation
* Wastewater treatment
* Pulp & Paper
* Brewery & Winery
* Dechlorination/chloramine reduction
* Removal of organic contaminants
* Taste and odor reduction
* Disinfection-by-product (DBP) removal
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water.
Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size.
Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power.
The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm.
The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
28633 Activate C T O Carbon Blocks Suppliers
Short on time? Let Activate C T O Carbon Blocks sellers contact you.
