Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size �¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
Crown Rubber & Plastic Products manufactures high-performance butterfly valve seals designed to effectively seal all key leakage pointsâ??pipe sealing areas, operating shafts, flanges, flap valves, and disk valves.
We offer in-house tooling and rapid production to meet custom requirements with minimal lead time.
Our seals provide high sealing efficiency with low torque operation and are available in sizes ranging from 25 mm to 950 mm.
Depending on application needs, materials include Natural Rubber, EPDM, Nitrile, Neoprene, Silicone, FKM, and Viton.
Applicable Standards
Ball valve : ANSI B16.34 / API6D / BS5351
Face to face: ASME B 16.10
Socket-weld ends : ASME B 16.11
Inspection and test : API 598 / API 6D
Products Description :
Products name:3PC Socket weld Ball Valve
Size: 1/2"~4"
Pressure Rating:1000PS
Thread ends: SW
Ball Type: Floating Ball
Port Type:Full Bore
Material: WCB, WC6, WC9, LCB, CF8, CF3, CF8M, CF3M, CN7M, Monel and Hast. etc.
Ball and Stem: SS304, SS316,SS304L,SS316L,SS410,SS416.etc.
Valve Seat: PTFE / RPTFE / PCTFE / VITON / PEEK / DEVLON . etc.
Operation: Manual
Application:
Offshore /Oil /Gas /Chemical /Petrochemical
Pulp /Paper /Water /Wastewater /Marine
Notes: The specifications can be designed and satisfied for customers' special requirements
We have obtained Certificates of CE, API 6D, API 607, TS and ISO 9001.
Marine Cast Steel Angle Valve is suitable for the pipe system with the medium fresh water, air & other gas, oil and steam with the temperature not over 300 centigrade degree.
Design Standard: JIS F7320-1996
Test Standard: JIS 7400-1996
Hydraulic Test Pressure:Body- 2.1Mpa, Seat-1.54Mpa
Flange size as per JIS B2220 -10K
Main Material:
Body: Cast Steel (SC480)
Bonnet: Cast Steel (SC480)
Packing Gland: Bronze (BC6) or Stainless Steel (2Cr13)
Stem: C3771BD (Brass) or SUS403
Seat: Bronze (BC6) or Stainless Steel (2Cr13, SCS2)
Disc: Bronze (BC6) or Stainless Steel (2Cr13, SCS2)
Test
Working pressure10K
Shell pressure21.1kg/cm2
Seat pressure15.0kg/cm2.
Application
1Face to face is according to JIS-10K
2Flange drilled is according to JIS B2212
Packing: Plywood Cases
Main Parts and Materials
NumberPart NameMaterial
1BodyCast iron or Ductile iron
2Seat ringBrass/Bronze
3DiscCast iron or Ductile iron
4StemCast iron or Ductile iron
5BonnetStainless steel
6Hand wheelCast iron or Ductile iron.
Product Description
Product Description
High performance SCS14 high mounting pad ball valve
1. SCS14 high mounting pad ball valve ;scs13 ball valve, flange ball valve, 50A ball valve, stainless steel ball valve, JIS bal valve, 50A flange ball valve
2. size: 15A-300A
3. Temperature: -29-150 centigrade
4. Media: water, gas, oil, acid
5. Design standard: BS 5351
6. Face to face: JIS B2002
7.Flange end. JIS B2212
8. Inspection: JIS B2003
9. Operation: handle, worm gear box, pneumatic, electric actuator
10. OEM Service & sincere service
11. Brand: APIRT
Product Name:High performance SCS14 high mounting pad ball valve
Material:stainless steel 304 316 304L 316L WCB
End connection:RF , FF,RTJ Flanged end
Standard:DIN GB ISO JIS BA ANSI
Pressure calss :1.6Mpa~32Mpa 150LB~600LB 5k~63k
Brand :APIRT
Working temperature:-40-200C
Used Medium:water Oil Gas Steam
Packing Details : Packing in plywood cases
Delivery Details : 3-30 days after order of Ball valves gate valve check valve globe valve or Y strainer.
1. Special logistics packaging
2. Suitable carton size
3. Shock bubble film
Standard:
Design and Manufacture: API 6D, ASME B16.34
Face To Face Dimension: ASME B16.10,API 6D
Flange Connection Dimension: ASME B 16.5
BW Connection Dimension: ASME B16.25
Test And Inspection: API 598, API 6D
Fire-safe Design: API 607/6FA
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
