Find Verified Used Engine Oil Suppliers, Manufacturers and Wholesalers

Biodiesel | Scope Oils, Cooking, Vegetable, Recycled

ITEMSTANDARD

Free fatty acids
3 % Max
M.I.U(Moisture and Impurities)0.1 % max
Saponification value: 18185-1955-195
Iodine value 120
Titre C (melting point)13.75 'C
Specific Gravity 25'C0.915
Density (kg/m3)920
Flashpoint by P.-M. (Degree C)220
Calorific Value (kj/kg)36,000
Kinematic Viscosity (40 deg.C)(mm2/s)
Carbon Residue (mass-%)0.4
Sulphur Content (mg/kg)18
Contamination (mg/kg)24
Acid Value (mg KOH)/g)7.0
Oxidation Stability (110 deg.C)(h)5.0 (min)
Phosphorus Content (mg/kg)15
Ash Content (mass %)0.01

We supply 100% used engine oil /Used Engine Oil/Waste Engine Oil/UEO from vehicles, which are of higher quality and quantities at very good competitive prices, and we have the ability to supply up to 2500 MT per month, as we try to keep the quality at the highest in its grade.

Water : +/- 2%
Gross calorific Value : Min 10 000 Kcal
Sulfur content : Max 0.

Packaging & Delivery
Packaging Details: DRUMS or as per buyer's request
Delivery Detail: prompt delivery once order is confirmed

USED ENGINE OIL SPECIFICATIONS

Test

Units

Methods

Result

Density

@ 15 �°C

ASTM-D4052

0.88

Colour

Max

ASTM-D1500

6

Flash Point PMCC

Min �°C

ASTM-D93

70-80

Pour Point

- Max �°C

ASTM-D97

-7

Viscosity @ 50 �°C

Cst

ASTM-D445

60

Sulfur Content

- Max WT%

ASTM-D4294

below 0.5%

Water

WT %

ASTM-D482

3%

Appearance

-

Visual

Black

Sediment





Below 0.5%

Used Engine Oil

At Mirielle, we are dedicated to providing high-quality oil products to meet the diverse needs of our customers. We offer a comprehensive range of engine oil, hydraulic oil, grease, and gearbox oil grades to ensure that our customers find the right product for their needs.

Our engine oil grades include SAE 0W, SAE 5W, SAE 10W, SAE 15W, SAE 20W, SAE 25W, SAE 30, SAE 40, SAE 50, and SAE 60. Our hydraulic oil grades include ISO 22, ISO 32, ISO 46, and ISO 68. Our grease grades include NLGI 0, NLGI 1, NLGI 2, and NLGI 3. Our gearbox oil grades include SAE 75W-90, SAE 80W-90, SAE 85W-140, and SAE 90.

We offer a variety of packaging options, including 55-gallon drums, 275-gallon totes, and bulk tanker delivery. Our team is committed to providing tailored solutions to meet your specific requirements.

We offer flexible shipment options to our customers including Partial Load Containers and Full Load Containers. Our pricing is dependent on various factors including grade and type of oil, packaging options and quantity ordered, shipping terms (FOB, CIF, DAP), geographic location of the buyer, current market conditions, and availability. Therefore, we invite you to contact our sales representative to get a special offer that is prepared regarding your specific needs.

Our Incoterms options include FOB, CIF, and DAP, while our payment terms are L/C. We take pride in our ability to provide high-quality oil products and exceptional customer service to our clients. Please feel free to contact us for more information about our products or to place an order.

Used Engine Oil :

Test Method Unit Range-

Colour : ASTM Blackish Brown
Density : 15 C ASTM D - 1298 Kg/L 0.87 - 0.89
Flash Point : ASTM D92 -12b C 150-210
Viscosity :50 °C ASTM D455-14 cSt 70-120
Water Content : ASTM D 95-13 % Vol 4-6 Max

We offer high-quality Used Engine Oil with excellent technical specifications, ideal for re-refining and industrial distillation processes. Our product is characterized by high thermal stability and consistent performance.
Technical Specifications:
Our recent lab analysis shows a Density of 876.3 Kg/m3 at 15�?�°C and a Kinematic Viscosity of 11.745 cSt at 100�?�°C. The product features a high Viscosity Index of 147.6 and a robust Flash Point of 209�?�°C, ensuring safety and quality. We have optimized the Water Content to a maximum of 2.0% to provide better efficiency for our clients' facilities. The distillation range starts at an Initial Boiling Point of 261.1�?�°C and reaches a Final Boiling Point of 506.9�?�°C.
Why Choose Our Product:
This oil is sourced and handled professionally to ensure it is free from excessive chemical contaminants. With a low water percentage and high flash point, it is a premium feedstock for producing high-grade Base Oils such as SN150, SN300, and SN500. We are capable of supplying large quantities consistently from the Port of Algiers with reliable logistics.

We are suppliers of used engine oil collected from automobiles, workshops and industrial sources in India. The material is suitable for recycling and re-refining applications.
Product: Used Engine Oil
Origin: India
Quality: To be supplied as per mutually agreed specifications
Water content: As per batch/COA
Packaging: Bulk / Drums / IBC as required
MOQ: 15-20 MT
Supply: Regular quantity available
Incoterms: FOB / CFR / CIF
Payment: L/C at Sight or T/T, negotiable
COA, product photos/videos and samples can be provided upon request. We are interested in establishing long-term business relationships with genuine international buyers.

Used engine oil is a recovered industrial lubricant collected after use in engines and machinery It is commonly sourced from automotive and industrial operations and is handled for reprocessing or energy recovery applications It is suitable for buyers involved in recycling and bulk industrial supply chains with consistent availability in large volumes

Waste Engine Oil (WEO) is sourced from automotive, transport, mining, marine, and industrial machinery after service use. It is suitable for re-refining, base oil recovery, fuel recovery, and industrial recycling applications. The product is collected, handled, and stored under controlled conditions to minimize contamination and ensure consistent export quality. We offer reliable bulk supply with flexible packaging and timely international shipments according to buyer specifications.

Used Motor Oil (UMO) is collected from automotive, commercial, and industrial sources and is suitable for recycling, re-refining, energy recovery, and industrial processing. The oil is carefully collected, stored, and loaded in compliance with international handling practices to maintain quality during transportation. We offer reliable export services with consistent supply volumes, competitive pricing, and flexible shipment schedules to customers worldwide. Product is supplied in bulk according to buyer specifications and applicable environmental regulations.

used motor / engine oil

Mobil 1 , ADVANCED FULL SYNTHETIC ENGINE OIL, 0W20 - 4 Ltr is our tried and trusted formulation delivering great all-round performance. Mobil 1 5W-50 keeps your engine performing like new. This race-proven technology is suited for extreme driving conditions and motorsport applications.

Racing or normal driving, Mobil 15W-50 (Rally Formula) helps to provide heavy-duty engine performance and protection for an outstanding driving experience.

Prevents deposits and sludge build-up to enable long and clean engine life
Anti-oxidants to help improve oil life
High performance basestocks combined with a precisely balanced component system for excellent all-round wear protection
Wide viscosity grade to help provide a flexible combination of high and low temperature protection
Performs and protects at low temperatures

Engine Oils are high-performance lubricants specially formulated to protect, clean, and enhance the performance of internal combustion engines. They create a protective film between moving engine components, reducing friction, wear, and heat generation while helping to prevent corrosion and deposit buildup.
Key Specifications
Product Type: Engine Lubricating Oil
Base Oil Type: Mineral, Semi-Synthetic, Fully Synthetic
Viscosity Grades: SAE 0W-20, 5W-30, 10W-40, 15W-40, 20W-50, and others
Standards: API, ACEA, JASO, OEM Specifications
Applications: Automotive, Commercial Vehicles, Industrial Equipment, Generators, Marine Engines
Operating Temperature Range: Suitable for low and high-temperature conditions
Compatibility: Gasoline, Diesel, Turbocharged, and Heavy-Duty Engines
Additives: Anti-wear, Anti-oxidation, Detergent, Dispersant, and Corrosion Inhibitors

TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc.
DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc.
HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc.
MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc.
NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc.

SUBARU: EJ20 2000cc AT etc.
SUZUKI: M13A 1300cc AT etc.
TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc.


TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI
TOYOTA LITEACE : 7KE 1800CC
TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI
: 2NZFE 1300CC 16VALVE DOHC EFI
TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI
TOYOTA CORONA : 2YPU 1800CC

TOYOTA: 3C-T,2C,3Y,2Y(TOWN ACE/LITE ACE) 1UZ,1ZZ,1KZ,3S-FE etc.
DAIHATSU: EF 660cc AT, EJ1000cc AT JB660ccetc.
HONDA: B20B 2000cc MT, D13B 1300cc AT, D15B 1500cc AT, D17A 1700cc AT, F18B 1800cc AT, F18B 1800cc MT, F20B 2000cc AT, F22B 2200cc AT, F23A 2300cc AT, J30A 3000cc AT, K20A 2000cc AT, L13A 1300cc AT, L15A 1500cc AT etc.
MAZDA: ZJ 1500cc AT,F8 1800cc AT,MT,RF 2000cc AT etc.
NISSAN: GA15 1500cc AT, GA15 1500cc MT, KA24 2400cc AT, QG18 1800cc MT, QR20 200cc AT, RB25 2500cc AT,CD20 2000cc AT,MT, RB20 2000cc AT,YD22 2200cc ATetc.

SUBARU: EJ20 2000cc AT etc.
SUZUKI: M13A 1300cc AT etc.
TOYOTA: 1AZ 200cc AT, 1G 2000cc AT, 1JZ 2500cc AT, 1NZ 1500cc AT, 1SZ 1000cc AT,1UZ 4000cc AT, 2NZ 1300cc AT, 3S 2000cc AT, 3S 2000cc MT, 4A 1600cc AT, 5A 1500cc AT, 5E 1500cc AT, 7A 1800cc AT etc.


TOYOTA ALLION : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA COROLLA G : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA PREMIO : 1NZFE:1500CC 16 VALVE DOHC EFI
TOYOTA NOAH &VOXY : 1AZF SE: 2000CC 16VALVE DOHC EFI
TOYOTA LITEACE : 7KE 1800CC
TOYOTA PROVOX : 1NZFNE 1500CC 16VALVE DOHC EFI
: 2NZFE 1300CC 16VALVE DOHC EFI
TOYOTA COROLLA : AE100: 5AFE 1500CC 16VALVE DOHC EFI
TOYOTA CORONA : 2YPU 1800CC

Commodity: used vegetable oil
Detailed Product Description
1.Used Cooking Oil (UCO), Drainage oil, used oil, used vegetable oil.
2.Used for Lube, raw materials of biodiesel.

Introduction
We have Used cooking Oil available in stock.. We currently have available 100,000 gallons of processed wvo dewatered .
We are looking forward to suppling serious and reliable buyers on a steady monthly basis.

Product Name: Used Cooking Oil

Quality: Top Quality
Delivery Time: 5-7 Days
Packaging: Custom
Customization Orders: Accepted

We Are The Wholesale Supplier and Exporter Of *Used Cooking Oil*.
Bulk Stock Available for Worldwide Delivery
Contact Us For More Information.

Vegetable oil can be used as an alternative fuel in diesel engines and in heating oil burners. When vegetable oil is used directly as a fuel, in either modified or unmodified equipment, it is referred to as straight vegetable oil (SVO) or pure plant oil (PPO). Conventional diesel engines can be modified to help ensure that the viscosity of the vegetable oil is low enough to allow proper atomization of the fuel. This prevents incomplete combustion, which would damage the engine by causing a build-up of carbon. Straight vegetable oil can also be blended with conventional diesel or processed into biodiesel or bioliquids for use under a wider range of conditions.

We supply premium-grade used diesel engines compatible with classic Toyota Land Cruiser and Toyota Coaster models (1969-1988).

Available Engine Models:

Toyota 1HZ

Toyota 1HZT

Toyota 1HDT

Product Highlights:

Genuine Japanese used engines

Low mileage and excellent running condition

Thoroughly inspected and compression tested

Clean interior components no overheating, no cracks

Complete long block (head & block)

Carefully packaged for export

Warranty:

â?? 12-Month Warranty
â?? Replacement support available

Applications:

Toyota Land Cruiser (1969â??1988)

Toyota Coaster Bus (1969â??1988)

Export Information:

Ready for international shipment

Secure pallet packaging

Fast and reliable delivery

We specialize in high-quality Japanese used engines with guaranteed performance and competitive pricing.

Contact us today for pricing, availability, and shipping details.

Used Cooking Oil

Specifications:

Appearance: Dark brown or black, depending on usage

Odor: Characteristic of used frying oil

Free Fatty Acids (FFA): Typically 5%-15% (varies based on usage)

Moisture Content: 0.5% - 1%

Impurities: Contains food particles, carbon, and other residues

Uses:

Biodiesel production

Animal feed industry

Industrial applications

Recycling Benefits:

Reduces environmental impact

Can be reprocessed into usable products like biodiesel

Packing:

Available as per buyer's request (e.g., in 200L drums, bulk tankers, or customized containers)

Price:

$350 CIF/MT (Cost, Insurance, and Freight per Metric Ton)

$320 FOB/MT (Free on Board per Metric Ton)

Used cooking oil from sunflower, soybean oil , corn oil, price $810 CIF/FOB , packing as per buyer's request, quality best used quality.

WE ARE SUPPLIERS OF HIGH QUALITY two and four stroke OUTBOARD ENGINES BOTH USED AND NEW. WE HAVE A WIDE RANGE OF 350HP, 300HP, 250HP, 200HP, 150HP, 100HP 75HP, 60HP 40HP , 15HP , 25HP ,40HP , AND MORE

WE ALSO HAVE V MAX SHO, JET DRIVE/HIGH THRUST, FOR STROKE, XTO OFFSHORE

spcification:

item standard
FFA(free fatty acid) 3% max
MIU(mositure and impurities) 1%max
iodine value 80
density(kg/m3) 920
flashpoint 220
carbon residue (mass-%) 0.4
sulphur(mg/kg) 18
contamination(mg/kg) 24
acid value (mg koh) 7.0

Used Oil Biodiesel Grade at very competitive rates.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion properties.

Capron Eco Magnatec is a four-season gasoline engine
oil produced with mineral base oil and good-quality
additives which features proper anti-rust and anti-corrosion
properties.

Engine coolant, also known as antifreeze,
is a liquid that runs through a vehicle's engine to
keep it within its correct operating temperature.
It prevents the engine from overheating in hot
weather and freezing in extreme cold weather.

Marine Engines are specially designed propulsion and power-generation engines used in boats, ships, yachts, fishing vessels, ferries, offshore platforms, and other marine applications. Built to withstand harsh saltwater environments and continuous operation, marine engines deliver reliable performance, fuel efficiency, and durability even under demanding sea conditions.
Key Specifications
Product Type: Marine Propulsion and Auxiliary Engines
Fuel Type: Diesel, Gasoline, Natural Gas
Power Output: 10 HP to 10,000+ HP
Engine Configuration: Inline, V-Type, and Opposed Cylinder Designs
Number of Cylinders: 2 to 20 Cylinders
Cooling System: Freshwater-Cooled, Seawater-Cooled, or Heat Exchanger Systems
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Starting System: Electric or Hydraulic Start
Control System: Mechanical or Electronic Engine Management
Applications: Commercial Ships, Fishing Boats, Ferries, Tugboats, Yachts, Offshore Vessels, and Naval Craft
Compliance: IMO, EPA Marine, and International Emission Standards

Caterpillar Engines are high-performance diesel and natural gas engines engineered to deliver exceptional power, durability, and efficiency across a wide range of industrial applications
Key Specifications
Brand: Caterpillar (CAT)
Product Type: Diesel and Natural Gas Engines
Power Range: 25 HP to 8,000+ HP
Engine Configuration: Inline and V-Type Cylinders
Number of Cylinders: 3, 4, 6, 8, 12, 16, and 20 Cylinders
Displacement Range: 1.1L to 106L+
Cooling System: Water-Cooled
Fuel System: Electronic Fuel Injection / Mechanical Injection
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Emission Compliance: EPA, EU Stage, and other international standards
Applications: Construction, Mining, Marine, Power Generation, Agriculture, Oil & Gas, and Industrial Equipment

Cummins Engines are globally recognized for their exceptional reliability, durability, and performance across a wide range of industrial, commercial, marine, agricultural, mining, and power generation applications. Engineered with advanced technology and precision manufacturing, Cummins engines deliver outstanding power output, fuel efficiency, and operational dependability even in the most demanding environments.
Key Specifications
Engine Type: Diesel, Natural Gas, and Alternative Fuel Engines
Configuration: Inline 4-cylinder, 6-cylinder, and V-type engines
Power Range: 49 HP to 4,400 HP (depending on model)
Displacement: 2.8L to 95L+
Aspiration: Naturally Aspirated, Turbocharged, or Turbocharged Aftercooled
Cooling System: Water-cooled
Fuel System: Electronic or Mechanical Fuel Injection
Emission Standards: EPA, Euro, Tier, and IMO compliant models available
Speed Range: 1,500 RPM to 2,100 RPM and higher
Starting System: Electric Start
Applications: Generators, Trucks, Buses, Construction Equipment, Marine Vessels, Mining Equipment, Agricultural Machinery, and Industrial Systems
Control System: Electronic Engine Management (selected models)

MKA Engineers & Exporters is an India-based engineering manufacturing company delivering custom fabricated assemblies, CNC machined components, sheet metal parts, and finishing solutions for industrial customers in India and internationally.

Founded in 2012, we operate from manufacturing facilities in Mumbai, Navi Mumbai, and a large-scale plant in Ratnagiri, Maharashtra spanning 20,000 square meters. Our production system is ISO 9001:2015 certified and we hold Export House recognition from the Government of India.

Our core manufacturing capabilities include:
- Heavy and medium fabrication assemblies
- CNC turned and milled components in SS, steel, aluminum, brass, and engineering plastics
- Sheet metal processing including laser cutting, bending, rolling, and welding (MIG, TIG, ARC, Spot, Stud)
- Surface treatment: powder coating, spray painting, passivation, anodizing, electroplating, electroless plating, hot dip galvanizing
- Product design, prototyping, tooling, testing, and assembly

We serve industries including equipment manufacturing, pharmaceuticals, mining, infrastructure, automotive, R&D, hospitality, and food chains. Our export supply reaches the USA, Germany, UK, Australia, Switzerland, Belgium, Norway, Italy, Canada, and Saudi Arabia.

Connect with us for RFQs, development parts, batch production, custom fabricated assemblies, machined components, and export supply requirements.

Engineering Products

spcification:

item standard
FFA(free fatty acid) 3% max
MIU(mositure and impurities) 1%max
iodine value 80
density(kg/m3) 920
flashpoint 220
carbon residue (mass-%) 0.4
sulphur(mg/kg) 18
contamination(mg/k ) 24
acid value (mg koh) 7.0

Product descriptions from the supplier
Used Cooking Oil
1. Organic oil
2. Waste vegetable oil WVO/ waste cooking oil
3. Used cooking oil for biodiesel
4. UCO

Application:
Suitable for biofuel, biodiesel, animal feed, soap, and other industrial applications

Packing:
Flexitanks, 20-22mt in 20 FCL or Liquid bag.

Storage:
The oil should be stored in a cool and dry place, protected from direct light.

ITEM STANDARD

Free fatty acids 3 % Max
M.I.U(Moisture and Impurities) 0.1 % max
Saponification value: 18185-1955-195
Iodine value: 120
Titre C (melting point) 13.75 C
Specific Gravity a 25 C 0.915
Density (kg/m3) 920
Flashpoint by P.-M. (Degree C) 220
Calorific Value (kj/kg) 36,000
Kinematic Viscosity (40 deg.C) (mm2/s)
Carbon Residue (mass-%) 0.4
Sulphur Content (mg/kg) 18
Contamination (mg/kg) 24
Acid Value (mg KOH)/g) 7.0
Oxidation Stability (110 deg.C)(h) 5.0 (min)
Phosphorus Content (mg/kg) 15
Ash Content (mass %) 0.01

Our Soybean oil is a versatile oil widely used in food and beverage, nutraceuticals, cosmetics, and various industrial applications. We produce soybeans renowned for their healthy properties and broad usage.

Source : Soybean (Glycine max)
Grade : Food/Edible Grade
Form : Clear, pale-yellow liquid
Taste/Odor : Neutral to mild
GMO : Conventional or Non-GMO, according to buyer requirement

Swaasam Calophyllum Oil is a premium botanical oil known for its skin healing and regenerative benefits. Calophyllum Oil, also known as Tamanu Oil, is a premium natural vegetable oil extracted from the seeds or nuts of the Calophyllum inophyllum tree through cold pressing. It is a rich, golden-green oil known for its nourishing, moisturizing, and skin-conditioning properties. Due to its high content of fatty acids, calophyllolide, and natural antioxidants, it is widely used in cosmetic formulations, skincare products, hair care products, aromatherapy, and wellness applications.

Key Benefits:
Helps reduce scars & blemishes
Supports skin repair & regeneration
Soothes inflammation
Applications:
Premium skincare & therapeutic products

We Are exporting 50% tread depth up of used car tyres by 20 ft.or 40(HQ) CONTAINER BASIS.

If You Have A Keen Interest In Them, Please Contact Us And check and send the detailes sizes of yours sellable for your market
to enable us to quote the best prices and to send the proforma invoice by 20 or 40 ft.(hq) container basis.once your order is confirmed,we can check the present stock and ship them as soon as possible.this is the order process.

Affordability: Used tires are often significantly cheaper than new tires, making them an attractive option for consumers on a tight budget.

Environmental benefits: By using used tires instead of buying new ones, consumers can help to reduce waste and minimize their impact on the environment.

Availability: Used tires are widely available, as there is a large market for them, and they can be found at tire shops, online marketplaces, and other retailers.

Quality: While used tires have previously been driven on, many still have plenty of tread life and can provide reliable performance, especially when they have been inspected and tested to ensure their quality.

Type:
SOLID TIRE
Warranty:
10 years
Place of Origin:
AUSTRIA
Brand Name:
used care tires
Product Name:
Used Car
Size:
13" 14" 15" 16"17"18"19"20"21"
Material:
Natural Rubber
Natural:
Safer
Maximum load:
6000
Quality:

Aviation turbine engine base lubricating oil (synthetic oil) is a high-performance lubrication base component specially designed for turbine engines (turbojet, turbofan, turboprop, turboshaft). It must pass rigorous certifications such as MIL-PRF-23699 (US military standard), MH/T 6084 (civilian standard), and GJB 135A (national military standard). Its core function is to lubricate bearings/gears, dissipate heat, prevent coking and corrosion, and ensure the stable operation of the engine under extreme conditions ranging from -60to 246.

PP breath cap with seal. color by your request.

High Purity Camphor Oil is a concentrated aromatic essential oil obtained from camphor laurel (Cinnamomum camphora), generally through steam distillation of leaves, twigs or terminal branches. It has a strong, fresh, penetrating and characteristic camphoraceous aroma and is suitable for aromatic, fragrance, incense, cosmetic and personal-care applications

Plant Part : Leaves / twigs / terminal branches
Extraction Method : Steam distillation
Appearance : Clear, colorless to pale yellow liquid
Aroma : Strong, fresh, penetrating, camphoraceous
Purity : High-purity natural grade

High-purity aromatic essential oil.
Strong and distinctive camphoraceous fragrance.
Suitable for incense and fragrance formulations.
Useful in cosmetic and personal-care products.

Engineered Oak Flooring is a type of wood flooring made from multiple layers of real wood veneers bonded over a plywood or HDF (High-Density Fiberboard) core. It combines the appearance of solid oak with enhanced stability and durability, making it suitable for various environments

3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber
0086-13915721168
Product number: PP Micro fiber
Equivalent diameter: 15-48 um
Elastic Modulus: â?¥3500 M�·pa
Breaking strength: â?¥ 560 M�·Pa
melting point: 160-180�°C
proportion: 0.91-0.93 g/cm�³
length: 3-20mm (as custom requirement)
Acid and alkali resistance (strong retention rate) â?¥96%


1. PP pressed Woven Bag
2. 300-350kg/ bale
3. About 9-10Tons / 20'FCL
4. About 21-22Tons / 40'FCL

We Supply Used cooking oil for Bio diesel and others as below :

USED COOKING OIL SPECIFICATION
Free fatty acids 3 % Max

M.I.U(Moisture and Impurities) 0.1 % max

Saponification value: 18185-1955-195

Iodine value: 120

Titre C (melting point) 13.75 'C

Specific Gravity @ 25 C 0.915

Density (kg/m3) 920

Flashpoint by P.-M. (Degree C) 220

Calorific Value (kj/kg) 36, 000

Kinematic Viscosity (40 deg.C) (mm2/s)

Carbon Residue (mass-%) 0.4

Sulphur Content (mg/kg) 16

Contamination (mg/kg) 24

Acid Value (mg KOH)/g) 7.0

Oxidation Stability (110 deg.C)(h) 5.0 (min)

Phosphorus Content (mg/kg) 15

Ash Content (mass %) 0.01

Packaging & delivery
TRANSPERENT PET BOTTLES * 1L, 3 L,5 Liters and in bulk PET Transparent Bottle (With Handle). JERRYCANS * 5 L, 10 L, 20 L, 25 L and 220 Liters Jerry can. METAL TIN * 16 L, 14 kg (with or without carton), 15 L / 15 kg, 16 kg (with or without carton 17 L / 17 kg, 18 L / 18 kg, 20L Metal Tin with Bung Hole (Round or Square) and 211 Liters Metal Drum. FLEXI TANK 20 MT Flexi Tank.

Product Grade: Industrial / Lubricant Grade Base Oil

Minimum Price (USD): Price on Request

Maximum Price (USD): Price on Request

Price Units: Metric Ton / Barrel

Incoterms: FOB / CIF / CFR

Product Detailed Description:
Base Oils are refined petroleum products widely used as the main raw material for manufacturing lubricants, engine oils, gear oils, hydraulic oils, industrial oils, greases, and other oil-based products. They provide essential lubrication properties such as viscosity, stability, smooth performance, and protection for machinery and engines. Atlantic Energies supplies quality Base Oils through reliable supplier networks to meet the requirements of lubricant manufacturers, industrial buyers, and global oil traders.

Minimum Order Qty: As per buyer requirement / Bulk order basis

Units: Metric Ton / Barrel

Packaging Details:
Supplied in bulk tankers, flexitanks, drums, IBC tanks, or as per agreed delivery terms.

Production Capacity:
As per supplier availability

Country Where Product Is Manufactured:
As per supplier origin / Contract terms

Sample Available:
Yes

Sample Cost Born By:
Buyer

Seller Product Code:
AE-BASE-OIL

Product Standards:
International Base Oil Standards / Contract Specifications

Brand:
Atlantic Energies

Model No.:
BASE-OIL

HS Code:
271019 / 27101999

Key Specifications

Key Specifications 1:
Refined petroleum base oil suitable for lubricant and industrial oil manufacturing.

Key Specifications 2:
Used in engine oils, hydraulic oils, gear oils, greases, industrial lubricants, and blending applications.

Key Specifications 3:
Available in different grades and viscosity ranges depending on supplier specifications and buyer requirements.

Key Specifications 4:
Available for bulk supply with FOB, CIF, or CFR delivery terms based on destination and order quantity.

Key Advantages

Key Advantage 1:
Essential raw material for producing high-quality lubricants and industrial oil products.

Key Advantage 2:
Reliable supply support for lubricant manufacturers, oil blenders, and industrial buyers.

Key Advantage 3:
Quality inspection and product documentation can be arranged as per contract terms.

Key Advantage 4:
Flexible packaging, quantity, and shipment coordination available as per buyer requirements.

Price - US $ 200.00 Per Metric Ton CIF

Payment terms: 100% L/C Preferred. If you want start with a 1st order TT Payment See the details below. : Normal my minimum quantity: 200MT CIF Any port. See the below.

5% security advance payment start with processing & the rest of the deposit (95%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C.

Quantity less than 200MT The payment Term:

20% security advance payment start with processing & the rest of the deposit (80%), to make goods available and to facilitate packaging, all the documents ready. TT or L/C pay at the sights after the 3rd party inspection reports and loading reports is done & completed. 2nd order & up 100% L/C.