Find Verified Tin Alloy Suppliers, Manufacturers and Wholesalers

Product : Tin Alloy Scrap
Form : Solid scrap, lumps, ingots, turnings, dross, solder scrap, or rejected components
Tin (Sn) Content : 30% â?? 99% (depending on grade)
Appearance : Metallic, free from excessive corrosion
Moisture Content : â?¤ 2%
Non-Metallic Impurities : â?¤ 2%
Radioactive Material : Not permitted
Hazardous Waste : Not permitted
Oil & Grease : Minimal or as agreed
Packaging : Drums, pallets, jumbo bags, or loose bulk

We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.

Tin Ore is a naturally occurring mineral primarily composed of cassiterite, the principal commercial source of tin metal. It is widely used in the production of tin ingots, solder, tin plating, electronics, chemicals, bronze alloys, and various industrial applications. Tin ore is processed through crushing, gravity separation, and concentration to produce high-grade tin concentrates suitable for smelting. High-purity cassiterite concentrates are highly valued by global smelters due to their excellent recovery rates and low impurity levels.

Product quality
Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm.
Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors.

Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg
The impurity composition of our tin ingots:

Our premium-quality Tin Ingots are manufactured from high-purity refined tin and comply with international quality standards. With a minimum purity of 99.9%, these ingots offer excellent corrosion resistance, superior malleability, and outstanding conductivity. They are widely used in solder manufacturing, electroplating, electronics, chemicals, automotive components, food packaging, bearing alloys, and other industrial applications. Each batch undergoes strict quality control to ensure consistent chemical composition, dimensional accuracy, and reliable performance. The ingots are securely packed for safe export and are available in bulk quantities with flexible packaging and shipment options based on buyer requirements. Competitive pricing, timely delivery, and customized solutions are offered for global buyers.

High-performance titanium alloy with low density (4.5 g/cm�³, 1/2 of steel), excellent corrosion resistance, and adjustable mechanical properties. Widely used in aerospace engines, medical implants, marine equipment, and high-end machinery. Complies with ASTM B348, AMS 4928, and ISO 5832 standards, exported to 35+ countries (Europe, North America, Japan, South Korea) with 18+ years of titanium alloy R&D and export experience.

High-quality tin-plated steel coils with excellent corrosion resistance, solderability, and surface smoothness. Adopt electrolytic or hot-dip tinning process, widely used in food cans, electronic components, hardware tools, and building decorations. Complies with ASTM A623, GB/T 2520, and FDA standards, exported to 40+ countries (Europe, North America, Southeast Asia, South America) with 15+ years of tin-plated product export experience.

Size : Upto 24 NB. (Seamless & Welded)
Grade : Alloys 20, NICKEL, Monal, Inconal Hastalloys & Titanium.
Type : Round, Square, Rectangular.
Welded : Upto 24 NB
Seamless : Upto 24 NB
Make : Msl/Ismt And Imported Origin..

Description
1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration.
2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal.
3. Good oxidation resistance, low tin slag and cost savings.
4. Solder joint is bright, full and uniform.
5. Economical and can produce the lowest consumption of the solid solder joints.

Application
Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

High-performance nickel-cobalt alloy with adjustable cobalt content (10%-60%), featuring excellent high-temperature creep resistance, corrosion resistance, and mechanical strength. Widely used in aerospace engines, new energy battery electrodes, medical implants, and marine deep-sea equipment. Complies with ASTM B163, AMS 5666, and ISO 5832 standards, exported to 30+ countries (Europe, North America, Japan, South Korea) with 15+ years of Ni-Co alloy R&D and export experience.

High-performance aluminum alloy coil with lightweight (density 2.7 g/cm), excellent corrosion resistance, and good formability. Widely used in building facades, automotive body parts, electronic enclosures, and food packaging. Complies with ASTM B209, GB/T 3880, and EN 485 standards, exported to 40+ countries (Europe, North America, Southeast Asia, South America) with 15+ years of aluminum coil export experience.

Lead Calcium Alloys
Tin Lead Alloys
Lead Antimony Alloys
Lead Cadmium Alloys

For price, specification and other details please contact us.

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

TATA AGRICO Tin Cutter 12 Inch with spring TCS012
Pliers & Cutters

Increased shelf life
Rust preventive top coat
Anti-slip powder coated handles
Induce less stress on the human body
Excellent quality handheld implements
Ergonomically designed
Guaranteed against manufacturing defects
Technical Specification:
Type Tin Cutter With Spring (12 inch)
Length X Width X Height (cm) 31X6.5X2.5

We cater to various industries with our qualitative Alloy steel Sheets , Plates & Coils that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.

Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels. Incoloy 825 is a completely austenitic nickel iron chromium alloy, stabilized by titanium and added with copper and molybdenum. Incoloy 825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
The Incoloy825 has the following functions:
Good resistance to stress corrosion cracking.
Good resistance to pitting and crevice corrosion
Good oxidation resistance and non oxidative thermal acidity.
It has good mechanical properties at room temperature and high temperature up to 550
Certification of pressure vessels with manufacturing temperatures up to 450 C
Incoloy 825 metallographic structure:
Incoloy 825 alloy has a stable face centered cubic structure. Chemical composition and appropriate heat treatment ensure that the corrosion resistance will not be weakened by sensitization.
Incoloy825 Corrosion resistance:
Incoloy825 is a general engineering alloy, which is resistant to acid and alkali metal corrosion in oxidation and reduction environments.
Incoloy825 is widely used in various industrial fields where the working temperature is no more than 550.
Typical applications include:
Heating pipes, containers, baskets and chains for sulfuric acid pickling plants.
Seawater cooling heat exchanger, marine product pipeline system, acid gas environment pipeline.
Heat exchanger, evaporator, washing, immersion tube, etc. In phosphoric acid production.
Air heat exchanger in petroleum refining
Food Engineering
chemical process
Flame retardant alloy for high-pressure oxygen



Product name

INCOLOY Alloy 825
Grade

INCOLOY Alloy 825

Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Grade

Cu

Ti

AI

P

C

Ni

Cr

Mo

INCOLOY Alloy 825

2

0.8

0.1

-

0.02

42

21

3

Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.



INCOLOY Alloy 825




Standard

Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)

Heat exchanger tube: ASTM A249 / ASME SA249, GB / T 24593-2009, HG 20537.2

Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3

Drinking water tube: GB / T 19228

Mechanical tube: ASTM A554, EN 10296-2

Size

Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.

Shape Section

Round, square, rectangular





Usage

Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;

Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;

Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;

Mechanical tube: handrail, railings, balustrade, hence and so on.



Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m.

2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.

3. Thick welding, good appearance.The mechanical properties of tube could be tested.

4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.

5. Full material traceability is guaranteed during the manufacturing process.

6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.

7. Internal Bore: Tubes have a smooth, clean and crevice free bore.

Classification : Hastelloy Alloy
Hastelloy Alloy Coil is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Coil is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Alloy Pipe is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Pipe is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.

Classification : Hastelloy Alloy
Hastelloy Alloy Sheet is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Sheet is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.