Find Verified Telecom Assemblies Suppliers, Manufacturers and Wholesalers

Any complexity metal assembly including large-sized on your inquiry at the best prices. For order or information contact us

Product Code Product Description

PRS-AS0070 Manual Marshall Compaction Assembly, 4â?�, ASTM

PRS-AS0071 Marshall Compaction Hammer, 4â?� ASTM for PRS-AS0070

PRS-AS0072 Wooden Compation Pedestal, ASTM, for PRS-AS0070 and PRS-AS0076

PRS-AS0074 Marshall Compaction Hammer BS

PRS-AS0076 Manual Marshall Compaction Assembly, 6â?�, ASTM

PRS-AS0077 Marshall Compaction Hammer, 6â?�ASTM, for PRS-AS0076

PRS-AS0070 Marshall Steel Block, Ã?102 mm dia. and 50 mm height,

PRS-AS0071 Marshall Steel Block, Ã?154mm dia. and 50 mm height,

STANDARDS :

The PRS-AS0070 and PRS-AS0076 Marshall Manual Assemblies are used to prepare Marshall specimens manually.
The Compaction Assemblies consist of a Marshall Compaction Hammer and a Wooden Compaction Pedestal. The Pedestal supplied complete with steel plate, mould holder and hammer guide.
PRS-AS0067 and PRS-AS0068 Marshall Steel Blocks are used for initial heating of the foot of compaction hammer should be ordered separately.
The Manual Marshall Compaction Assemblie are supplied complete with;
â?¢ Wooden Compaction Pedestal
â?¢ Hammer

Product Code Dimensions Weight (approx.)

PRS-AS0070 350x400x1600 mm 50 kg

PRS-AS0071 100x100x108 mm 8 kg

PRS-AS0072 350 x400x1600 mm 42 kg

PRS-AS0074 100x100x108 mm 8 kg

PRS-AS0076 350x400x1600 mm 57 kg

PRS-AS0077 100x100x108 mm 14 kg

PRS-AS0067 110x110x60mm 3,5 kg

PRS-AS0068 160x160x60 mm 7,5 kg

Product Code Product Description

PRS-KA0568 Compression Jig Assembly for Rock Core Specimens

STANDARDS : ASTM D2938

The jig assembly is used for uniaxial compressive strength tests of rock core specimens with 50 to 55 mm dia. and 100 to 110 mm height and consists of a two-column frame fit with an upper platen with spherical seat that moves vertically sustained by a spring. The lower platen is fit to the base.The assembly is also used for compressive shtenght test of natural stone core specimens.
PRS-KA0568 Compression Jig Assembly is used for uniaxial compressive strength for rock core specimens.

Platens Dimensions 55 mm dia, 28 mm thick

Min. Hardness of Platens 58 HRC

Vertical Clearance 122 mm

Dimensions 120x120x250 mm

Weigth (approx.) 10 kg

Technique Parameter

Oxygen flow rate .. 1L-5L
Oxygen concentration .. 93% + 3%
Rated voltage / Power .. AC220+V 22V ,50Hz + 1Hz
Material .. Plastic
Oxygen concentration .. 0.5-3L/min + 90%
Flow fluctuation .. 0.7L/min
Atomization amount .. + 0.2ml/min
environment temperature .. 5-40
humidity range .. 80%
Atmospheric pressure range .86kpa -- 106kpa
Size .. L448*W245*H492
Weight .. 14.5g


1. Headset type components (optional)
2. Nasal tube assembly (optional)
3. Atomizer assembly

Technique Parameter

Oxygen flow rate .. 1L-5L
Oxygen concentration .. 93% + 3%
Rated voltage / Power .. AC220V + 22V ,50Hz + 1Hz
Material .. Plastic
Oxygen concentration .. 0.5-3L/min 90%
Flow fluctuation .. 0.7L/min
Atomization amount .. 0.2ml/min
environment temperature .. 5-40
humidity range .. 80%
Atmospheric pressure range .. 86kpa -- 106kpa
Size .. L448*W245*H492
Weight .. 14.5g

1. Headset type components (optional)
2. Nasal tube assembly (optional)
3. Atomizer assembly

We have been stocking steering racks since Autoenterprises was founded in 1999, and we pride ourselves on the quality of the parts that we supply throughout the world.
Every rack is carefully inspected at every stage our supply process - at procurement, upon arrival to our warehouse, and then once more before despatch to customers - ensuring that all steering racks are sold in perfect re-manufacturable condition.

Operated by our 6 man team, we stock over 50,000 steering rack-and-pinions at any given time. These consist of manual, power and electric racks for right- and left-hand drive, from all manufacturers, from Adwest to ZF, and supply parts for all types of vehicles. We also now stock steering boxes as a component of the Steering Rack Division.

Product stocked at: Basildon branch.
Closest Airport: All London airports within easy reach.

-Prime quality raw material / meltblown
-Ce certification from MNA (NANDO ) internationally recognized degree
-white/black/gray options
-1 full truck 633.000 pcs mask
-Directly from manufacturer
-Made in Turkey

We can produce under your brand name.

Certificate : MNA international

Protection Level : %99.5

Comfortably breathing clean, safe air is important for workersâ?? health
and workplace morale. With this in mind we have designed a range
of Disposable Respirators using science to increase comfort,
breathability and protection.

In combination with ergonomic design, a wide range of technologies
including the NI (Nose isolation) inner seal design help to
deliver perferct sealing and comfort around nose area.

The 5000 Series respirators provide premium comfort and safety. The convex shape, soft inner face-seal ring, 4-point
adjustable straps and adjustable nose clip ( 5030 & 5035 Models ) ensure comfortable wear over a range of face sizes.
inner face-seal has the innovative NI
( nose isolation ) protection design which provides comfort on nose and create highest standard sealing.

We can produce under you brand name.

Demos is the major manufacturer and trade company in Turkey since 2007 .

We would like to offer you â??â??prime and economic Muslim Pray Rugsâ??â??.

Dimentions : 70x110 (It can be change according to your request)

Pattern: We have more than one thousand pattern ( if you have pattern please send us we can work on it)

Materiel: %70 polyster %30 cotton ( It can be change according to your request )

We would like to offer you prime and economic Muslim Pray Rugs.

Dimentions : 70x110 (It can be change according to your request)

Pattern: We have more than one thousand pattern ( if you have pattern please send us we can work on it)

Materiel: %70 polyster %30 cotton (It can be change according to your request )

Breakout optical cable, suitable for outdoor use, is used for RRU assembly in 3G and LTE (4G) base stations.

Fiber optic is a system that works on the principle of transmitting light through a pure glass thread as thick as a human hair and produced very precisely. The main reason for choosing cables produced in this way is that environmental conditions are severe; It is not affected by humid, damp places where electrical field interference is intense and always provides a stable connection. Fiber optic cables transmit at the speed of light, that is, 300 thousand km per second. Because of these aspects, they are designed for data transfer over long distances.

LC LC MM 50/125 DX type breakout fiber optic cable is mostly used in base stations. Fiber optic breakout cables are prepared in different quantities according to the needs in the field.

Fiber optic patchcord cables are used in GSM base stations, Fiber Optic interconnections, patch panels, distribution point connections and ODF connections with its structure suitable for indoor use.

The following types of fiber optic cable patchcord cables are mostly used in base stations.

LC LC MM 50/125 DX patchcord fiber optic cable

LC LC SM 9/125 DX patchcord fiber optic cable

SC LC MM 50/125 DX patchcord fiber optic cable

SC LC SM 9/125 DX patchcord fiber optic cable

Fiber optic breakout cables are prepared in different quantities according to the needs in the field.

For all kinds of devices working with electricity; You can use the Wavecontrol WP50 Low frequency probe to measure the electrical field and magnetic field effect created by energy transmission lines (low medium high voltage transmission cables), transformers, electrical appliances etc.

All in one type low-medium-high intensity light incorporates infrared that makes it completely night vision goggle compatible obstruction light. It is maintenance-free, complying ICAO and FAA international standarts. This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes. This light has two operations modes: flashing or steady burning. The operation modes arer adjustable by end user. On/Off is controlled by photocell automatically, and fault alarm outputting if any fails. It is ideal product for the users.

Fields of applications:

Airports
Tall buildings / structures
Chimneys
Telecommunication towers
Tower Cranes
Transmission lines
Radar
Antenna
Flag pole
Wetra LIOL-B Low Intensity Single Light Datasheet

All in one type low-medium-high intensity light incorporates infrared that makes it completely night vision goggle compatible obstruction light. It is maintenance-free, complying ICAO and FAA international standarts. This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes. This light has two operations modes: flashing or steady burning. The operation modes arer adjustable by end user. On/Off is controlled by photocell automatically, and fault alarm outputting if any fails. It is ideal product for the users.

Fields of applications:

Airports
Tall buildings / structures
Chimneys
Telecommunication towers
Tower Cranes
Transmission lines
Radar
Antenna
Flag pole
Wetra LIOL-B Low Intensity Single Light Datasheet

7/8³ Halogen-free RF Cable

FEATURES / BENEFITS

Low Attenuation
The low attenuation of CELLFLEX coaxial cable results in highly efficient signal transferin your RF system.

Complete Shielding
The solid outer conductor of CELLFLEX coaxial cable creates a continuous RFI/EMI shield that minimizes system interference.

Low VSWR
Special low VSWR versions of CELLFLEX coaxial cables contribute to low system noise.

Outstanding Intermodulation Performance
CELLFLEX coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.

High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric materials, CELLFLEX cable provides safe long term operating life at high transmit power levels.

Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas, wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment interconnects.

Meets or Exceeds: IEC 60754-1, -2; IEC 60332-1-1, -2;IEC 61034-1, -2; IEC 60332-3-24
(formerly IEC 60332-3-C)

RFS 1/2³ Halogen-free RF Cable

FEATURES / BENEFITS

Low Attenuation
The low attenuation of CELLFLEX coaxial cable results in highly efficient signal transferrin your RF system.

Complete Shielding
The solid outer conductor of CELLFLEX coaxial cable creates a continuous RFI/EMI shield that minimizes system interference.

Low VSWR
Special low VSWR versions of CELLFLEX coaxial cables contribute to low system noise.

Outstanding Intermodulation Performance
CELLFLEX coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.

High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric materials, CELLFLEX cable provides safe long term operating life at high transmit power levels.

Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas, wireless cellular, PCS and ESMR base stations, cabling of antenna arrays, and radio equipment interconnects.

Meets or Exceeds: IEC 60754-1, -2; IEC 60332-1-1, -2;IEC 61034-1, -2; IEC 60332-3-24
(formerly IEC 60332-3-C)

Jumper cables provide easy connection from the main feeder cable to the antenna or BTS. Jumper cables prevent dropped calls with very low VSWR value and high quality with IP68 environmental factor, helping to increase the profitability of the mobile communication operator in the long period

High performance connectors are designed for use with 7/8³ Flexible RF cables. They are designed specifically to provide the highest quality connector-cable interface while simplifying and speeding up connector attachment. All connectors are fully tested for mechanical and electrical compliance to industry specifications. The connector meets all technical requirements and covers high frequencies as well as legacy applications.

Tapper or Directional Coupler have been designed for a variety of wireless applications in the frequency band from 700 to 2700 MHz. In indoor projects, it is used to move the rf cable vertically with the least loss.