# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.
# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.
# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.
# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm
# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.
# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.
# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.
# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.
# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°
# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.
PLIF/TLIF SET
CERVICAL PLATE SET
THROCOLUMBAR POSTERIOR SCREW SET
LUMBAR & CERVICAL CORPECTOMY SET
POSTERIOR CERVICAL FUSION SET
DEFORMITY SCOLIOSIS SET
SCREW AND PLATESPINAL SET
ANTERIOR CRUCIATE LIGAMENT SET
POSTERIOR CRUCIATE LIGAMENT SET
SHOULDER ARTHROSCOPY SET
CERVICAL PEEK CAGE SET
MOBIL PROTHESIS
INTRAMEDULAR NAIL SET
INTRAMEDULAR FEMUR NAIL SET
INTRAMEDULAR PFN NAIL SET
INTRAMEDULART�°B�°A NAIL SET
INTRAMEDULAR ARTRODEZ NAIL SET
INTRAMEDULAR HUMERUS NAIL SET
TOTAL KNEE PROTHESIS SET
TOTAL HIP PROTHESIS SET
BIPOLAR (PARTIAL) HIP SET
REVISION HIP SET
REVISION KNEE SET
UNIKONDILER KNEE SET
Drilling capacity in:
- Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm
- Core cutter (TCT cutter only) in masonry up to: 60 mm
No load rpm: 0-1300 min–1
No load impact rate: 6200 min–1
Weight: 2.6 kg
Power input: 650 W.
Our company was among the first dealing with usag tools (belonds to stanley group) in Greece (since 1973). Being sure that you know the products of this brand we ask you to surf in their catalog in our site in internet
Moreover we liquidate our existing stock in the following brands:
- Koken (Japan) sockets & accessories
- Baldur (pullers by gedore) pullers
- Knipex (limited stock)
- Pastorino (stanley facom group)
- Super ego - plumbers tools
It can burnish the workpieces with various diameters.
Tools can be used in two different ways by changing the shank. Shank of the tool can be disassemble and can be interchanged on the body. So with same tool either shafts or flat surfaces can be burnished. For this reason it does not require to have two other tools for two different surfaces.
Tool shank and dial indicator have a special right and left interchange.
Because of the modular structure it is suitable for the right and left hand operation.
Used either with cnc or with universal lathes.
Tools don't require settings and when the tool is tied to the machine it is ready to use.
During the operation the tool is fixed and the workpiece rotates.Rotation is possible in two directions.
Roller burnishing force can be adjusted. So it is possible to achieve high quality and standard roughness values.
Process can be done min. Up to shoulders and edges.
It is capable to burnish all kinds of metallic materials up to the tensile strength of 1400n/mm¦ and to the hardness 42-45 hrc.
Wear and damaged parts can be changed easily.
According to the preference, shank is given as square, weldon or vdi. Whole shanks can be assembled, disassembled and can be interchanged.
The tools are adjusted. The adjustment capacity for every diameter is 0, 5 mm. The tools have an adjustment mechanism which gives the possibbilty to adjust very high precision measurements. This mechanism provides adjustment precision up to 0, 0050 mm. Yamasa mx type roller burnishing tools for cylindrical shafts can work in h8 tolerances with a single adjustment. These tools are capable to process all kinds of materials with 1400 n/mm2 tensile strength and hardness up to max. 42-45 hrc. Tools work by turning to right. Either tool or workpiece may turn. These tools can be used on universal or cnc lathes, machining centers, drilling machines or other machines which process by turning. The tools can be tied to all machines easly and practically. Tools have rather a long life. It is possible to use the tools for a long time without size change due to abrasion.
Roller burnishing medhod is for to make the workpiece, which has passed through the pre-machining, smooth and hard. It is possible to process any kind of metallic material by using this method. The roller burnishing is done by contacting of the rollers on the surface of the workpiece by the help of a precious mechanism. When such a contact is obtained, the workpiece or the tool turns at a specified speed, then the rollers go forward on the workpiece's surface by rotation. In addition, a stress is applied on the surface of the workpiece with a certain force thus the process of roller burnishing is achieved.
There are too many advanteges as below :
The surfaces in quality of rz< 1¦m can be obtained.
It is possible to catch the desired size easily and rapidly.
The process is completed by one pass. The process time is very short.
The roller burnishing process hardens the surface in the same time. It ensures the processed surface to become stronger, more brilliant and slippery.
Roller burnishing process makes the wear of the workpiece difficult and other components which work on the workpiece surface.
It saves time, money and energy.
No sawdust and residues occurr. No noise and damage to the environment.
It requires low lubrication and cooling.
Yamasa roller burnishing tools and machines provide surface hardness and calibration (measurement accuracy) beside of burnishing. Because of the high processing power and speed ability it provides time savingthese are the preference causes for the serial production. . These machines and tools are capable to process all kinds of metallic materials with 1400 n/mm¦ tensile strength and hardness up to max. 42-45 hrc.
We are a worldwide leading manufacturer of measuring instruments. We are actively looking for distributors worldwide. Should you want to distribute the best quality products with great product availability at competitive prices, please do not hesitate to contact us.
Manufacturer : Selestampa
Model : Vulcan 180
Manufacturing year : 2022
From the 640 880 mm format up to 1300x1800mm format.
Size: 640 /880 ~ 1300/1800 mm,
pneumatic clutch,
control console,
INVERTER,
self-centering frame,
single-shot / continuous / timer,
Automatic centralized lubrication system,
Pneumatic system for lifting plate,
Total weight 145 Q
Motor 15 Kw
5,5 bar needed,
tools,
WITH CE MARK,
Like as new
Visible at the warehouse.
All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales.
All information provided in this offer is from the source(s), which is/are deemed reliable and trusted.
Ex.Works, excluding VAT, insurance, dismantling, packing and delivery.
Leading Exporter of Optimum Quality N2O Whipped Cream Charger at Best Price
Cream deluxe is a must have for every respectable caterer. The best product for whipping up cream quick and effectively.
Compared to the traditional cream chargers, this new larger cream charger enables the user to have greater amounts of Nitrous Oxide at their disposal.
580g of Nitrous Oxide
Entirely disposable and recyclable
Complies with European laws and regulations
Tested at 165 bar
Produced with top of the line stainless steel
Product Name Cream Charger
Type Dessert Tools
Dessert Tools Type Cream Chargers
Material Metal
Metal Type Stainless Steel
Feature Stocked
Gas Nitrous Oxide N2O
Use Catering Purpose Only
Weight Tare Empty Bottle
3647 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
