Find Verified Soil Testing Surveying Instruments Suppliers, Manufacturers and Wholesalers

With Accu-Chek Aviva you can test in a user-friendly and simple way. The Accu-Chek Aviva test strip is larger than the average strip and therefore convenient and easy to dose. It is a simple, fast-absorbing test strip, where only a very small drop of blood is sufficient for a good test. In addition, Accu-Chek Aviva test strip absorbs the blood quickly.

Bayer Contour next teststrip

For use with Bayer's Contour XT & Contour Next glucose meter.

Composition
21% FAD-Glucose-Dehydrogenase (Aspergillus sp, 4.0 U/test strip).
54% mediator
25% non-reactive components

Do not use if package seal is damaged or missing.

Accu Chek Instant test strips

For determining blood sugar
Suitable for self-application
Suitable for the following blood glucose meters:

Accu-Check Instant
Accu-Check Instant S

One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds.

OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems.

Tiny blood sample (1 microlitre)

End-fill strip automatically draws in blood

Indicator window shows when you have enough blood

Touchable strip

Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.

Blood glucose testing strip designed to eliminate the risk of a false reading by checking each sample twice.
one Touch Ultra 100 Test Strips is a brilliant diabetic care product for diabetic patient to examine the blood sugar level on a regular basis and keep a check on it. The pack consists of 50 blood glucose monitoring strips. The Onetouch Ultra 2 is one of the best in class glucometers which makes self-monitoring of blood glucose very easy.
OEM Meter Diabetes Sensor Blood Glucose Test Strips
Packing:24Sets / CTN
CTN Dimension:37X32.5X20.5CM
G.W:4.7 KGs N.W:4.2 KGs

Armchair

TC Instrument

Natural Clinoptilolite based fertilizers are known to be â??intelligent fertilizersâ?? due to their high cation exchange capacity and porosity. Recall, Clinoptilolite is the worlds only negatively-charged mineral in existence, it therefore has tremendous breakthrough possibilities and especially in Agriculture applications. Clinoptilolite has a proven ability of a natural slow release mechanism of nutrients to the root zone of new seedling thereby increasing the plantsâ?? strength and performance.

Product Code Product Description

PRS-ZE0965 Surface Soil Sampler (Core Cutter), 3â?� dia. ASTM

PRS-ZE0966 Spare Sampling Tube (Drive Cylinder), 3â?� (76.2 mm) x 70 mm high, ASTM, for PRS-ZE0965

PRS-ZE0967 Surface Soil Sampler (Core Cutter), 4â?� dia. ASTM

PRS-ZE0968 Spare Sampling Tube (Drive Cylinder), 4â?� (101.6 mm) x 127 mm high, ASTM, for PRS-ZE0967

PRS-ZE0970 Surface Soil Sampler (Core Cutter) Set, 100 mm dia., BS

PRS-ZE0975 Surface Soil Sampler (Core Cutter) Set, 150 mm dia., BS

STANDARDS : ASTM D2937; CNR No.22; BS 1377:9

Surface Soil Sampler (Core Cutter) is used to determine the insitu density of soil by taking a standard volume of soil sample from the ground which is then removed, trimmed and weighed.

The ASTM/CNR version, PRS-ZE0965 and PRS-ZE0967 Surface Soil Sampler (Core Cutter) consists of a drive head, 5 kg drive hammer and a thin wall sampling tube. 5 kg sliding weight drop hammer makes a free-fall on to the driving head which is placed on top of the sampling tube. Manufactured from steel and plated for corrosion resistance.

PRS-ZE0970 BS Type 100 mm Surface Soil Sampler (Core Cutter) Set consists of a driving dolly, 13,5 kg driving rammer and 100 mm dia. x 130 mm high core cutter. PRS-ZE0975 BS Type 150 mm Surface Soil Sampler (Core Cutter) Set BS consits of a driving dolly, 16 kg driving rammer and 150 mm diax 180 mm high core cutter.

Product Code Product Description

PRS-ZE0620 Automatic Soil Compactor, 220-240 V 50 Hz (60 Hz version is available upon request)

PRS-ZE0620/110 Automatic Soil Compactor, 110 V 60 Hz

PRS-ZE0622 ASTM/EN/BS Rammer for PRS-ZE0620

PRS-ZE0624 ASTM Rammer Face Ã? 50.8 mm for PRS-ZE0620

PRS-ZE0625 EN/BS Rammer Face Ã? 50 mm for PRS-ZE0620

STANDARDS : ASTM D558, D559, D560, D698, D1557, D1883; EN 13286 2, 13286-47; BS 1377:4 AASHTO T99, T134, T135, T136, T180, T193; NLT 107/98, 108/91, 111/87

PRS-ZE0620 Automatic Soil Compactor is designed to compact specimens automatically and uniformly, assuring conformity with the above listed international standards.

The principle of the design is to allow the hammer to drop the required height into the soil in the mould which rotates circularly to distribute the blows uniformly over the surface of the specimen in the mould. The drop height is adjustable to 300 mm, 305 mm, 450 mm and 457 mm.

The rammer is circular faced and interchangeable to 50 mm or 50.8 mm diameter. Rammer weight is adjustable to 2.5 kg or 4.5 kg according to reference standard. When compacting 100 mm diameter specimens the unit operates on a single radius and when compacting 150 mm diameter specimens the unit operates on iner and outer radius to obtain even compaction.

The number of blows per layer can be set at the beginning of the compaction process by the digital counter according to the standard preferred by user. This automatic blow pattern ensures effective and equal compaction for each layer of soil by rotating the base table, so the mould, in equal steps and travelling the rammer across the mould. User defined blow number and in-out distribution is also available.

Compactor is equipped with programmable digital counter which allows the machine;
â?¢ To select reference standard ( number of blows and mould size ) by the operator at the beginning of the test.

â?¢ To set desired compaction cycle ( number of blows and count of the number of inner and outer drops) by user.

Rammers

EN / BS Circular faced, 50 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

ASTM Circular faces, 50.8 mm dia. Adjustable to 2.5 kg or 4.54 kg weight

Drop Height

BS Adjustable to 300 mm or 450 mm

ASTM / AASHTO / EN Adjustable to 305 mm or 457 mm

The Automatic Soil Compactor is supplied complete with;
â?¢ ASTM/EN/BS Rammer
â?¢ ASTM Rammer Face, Ã? 50.8 mm.
â?¢ EN/BS Rammer Face, Ã? 50 mm.

Dimensions 650x550x1550 mm

Weight (approx.) 150 kg

Power 370 W

# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.

# Special callipers 3-point vernier calliper;
# 5-point vernier calliper;
# Marking-off vernier calliper;
# Weld seam gauge;
# Other types.

# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.

# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.

# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm

# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.

# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.

# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.

# Smooth rings Reference rings;
# Setting rings
Range: 6-150 mm.

# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.

# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°

# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.

- Incontinence aids, orthopaedics, dressings, absorbent cotton wool for surgical and medical use and for cosmetic use; baby diapers.
- Disposable Medical Devices like needles, syringes, flow-sets, probes, catheters and many others.
- Pharmaceuticals, such as surgical gloves, bandages, products for wound management, incision films.

Barber Leather accessories, Bags, Kits

Beauty Instruments, Barber Leather Accessories, Bags, Kits

Product Code Product Description

PRS-ZE0160 Soil Lathe / Trimmer and Extruder

PRS-ZE0162 Open Wire Saw

PRS-ZE0164 Wire Saw

PRS-ZE0166 Trimming Knife

PRSGG-2205 Porcelain Mortar with Pestle 130 mm dia

PRSGG-2215 Rubber Headed Pestle

The PRS-ZE0160 Soil Lathe, Trimmer and Extruder is used to extrude and trim soil samples from 35 mm to 100 mm diameter to reduce samples. It should be used together with PRS-ZE0162 Open Wire Saw.

Open Wire Saw, Wire Saw, Trimming Knife, Porcelain Mortar with Pestle. The Rubber Headed Pestle can be ordered separately.

Technical Specifications

Specimen Lathe 35x70 mm to 100x200 mm

SpecimenTrimming and Extrusion 35x70 mm to 50x100 mm

Vertical Daylight 260 mm

Dimensions 220x300x450 mm

Weight (approx.) 15 kg

Professional fixed milling machine available in 3 different models ideal for small agricultural and cultivators.

MODEL WORKING WIDTH WEIGHT SUGGEST POWER OVERALL WIDTH HEIGHT DEPTH' NUMBER OF CUTTERS
ARF1300 130 CM 405 KG 35 CV o 26 KW 147 CM 80 CM 120 CM 30 Unit
ARF1850 185 CM 505 KG 50 CV o 37 KW 200 CM 80 CM 120 CM 42 Unit
ARF2400 233 CM 580 KG 65 CV o 48 KW 250 CM 80 CM 120 CM 52 Unit
The standard equipment includes a chain transmission, 4-bent curved hoe, automatic chain tensioner for depth slides, 3-point universal attachment Cat. 1, 540G / 1 'single-speed gearbox, clutch coupling

Fixed version-milling machines that can be easily used with small and medium-sized tractors. Suitable for working on medium consistency soils and for preparing seed beds for cultivation and horticulture. The machine is ideal for operators working on small and medium-sized soils.

The milling machines of the AGRIROCK line help to preserve the microorganisms useful for the biological balance of the soil and reduce the time required for preparation for sowing.

Given the reduced size of the cutters, the best adaptation to the processing of sloping land and irregularly shaped plots is significant.

Effective mixing of the soil with homogeneous distribution of the fertilizers throughout the worked profile with the possibility of working moist soils in depth but dry on the surface.

Shredding of crop residues in sizes more suitable for natural decomposition and humidification.

Scissor Tc Instruments 01

Ingersoll Rand offers a full range of compressor and dryer packages designed specifically to provide clean, dry compressed air for process and instrument air applications. Instrument and Service Air (IA & SA) equipment is used in a wide range of industries, from power generation and oil and gas, to chemical and manufacturing.

Instrument and service air systems generally consist of compressors, dryers, filters, receivers, coolers, and control systems. These work together to provide stable and reliable air to a variety of plant consumers; some of which play a critical role in maintaining plant operation and safety. As a result, any equipment or systems need to be properly designed, and capable of producing the right quantity of quality air as required by users.

Ingersoll Rand can design instrument air packages with various compressor modifications to provide an optimum solution for your project:

Engineered-to-order solutions that can be supplied as per customer requirements.
Deliver the total package, including the PLC based controller.
Fully integrated with dryers, filters and piping, etc. in various custom installation types, including the container, skid, and supply of system components.
Reliability: we use high-quality components to ensure maximum performance over time according to customer requirements.
Provide the optimum solution, utilizing the best compressor working principles.
For use in safe areas as well as hazardous areas.
Deliver Simple â??Plug & Playâ?? Installation.
All of our instrument air packages can be engineered to meet global and local quality certificates issued by various institutions worldwide, including API 618, API 619, API 672, ATEX, IECEx, and others.

Ingersoll Rand can design the instrument air packages with different compressor modifications to meet the optimum solution for your project.

Testing Sieves

STANDARDS : EN 933-2; ISO 565, 3310-1, 3310-2; ASTM E11, 323

PARSROS offers a wide range of High Quality Testing Sieves which are used in all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials. PARSROS testing sieves are of the highest quality to ensure consistent fit, accurate specifications and durable construction.

Woven Wire Cloth and Perforated Plate Sieves are supplied in 200 mm and 300 mm frame diameters in various nominal aperture sizes suitable for several applications and standards. Wet Washing Sieves are used for wet testing of various materials enabling to wash the fines through the sieve without losing any of the sample. Available in 200 mm diameter with 100 mm and 200 mm deep models.

All parts of testing sieves are manufactured from stainless steel. Receiving Pans and Lids are available in stainless steel with 200 mm and 300 mm diameters.

- Nasal test
- Single packed with all component
- Quick result within 15-20 minutes
- Specificity 99,54%
- Sensitivity 92,71%
- Accuracy 97,14%
- CE Home Certificate (EC Certificate No. 1434-YVDD-446/2021)
Directive 98/79/EC Concerning in vitro diagnostic medical devices