Find Verified Textile Chemicals Suppliers, Manufacturers and Wholesalers

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

Cocamidopropyl betaine (CAPB) is an amphoteric surfactant derived from coconut oil and dimethylamino ­propylamine. It is a zwitterionic chemical compound with a quaternary ammonium cation. It is a clear to pale yellow transparent liquid and is used as a surfactant and as an emulsifying agent and thickener.'

Application
> It's widely used in the senior shampoo, bath liquid, hand sanitizer, foam cleanser and household detergent preparation.

> It's the main component of mild baby shampoo, baby foam bath, baby skin care products.

> In the hair care and skin care formula is a good soft conditioning agent.

> Can also be used as wetting agents, thickeners, antistatic agents and bactericides.

> Used as a soft treatment agent in the textile industry.

BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper.
It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system.
It Should be applied prior to either alum or cationic auxiliaries.
Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on:
- Type of furnish
- Base pulp pH and brightness
- Desired brightness and whiteness gain

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.

Specifications
Potassium Hydroxide is a white flake or colorless clear liquid. It is one of the strongest alkalis.

Properties:
Product Name:Caustic Potash or Potassium Hydroxide
CAS No.:1310-58-3
EINECS No.:215-181-3
HS.Code:2815200000
Molecular Weight:56.11
Appearance: White Flake or colorless clear liquid

Main Applications:

Potassium Hydroxide is mainly used in alkaline batteries industry, soaps, high-class detergents and cosmetics. Industrial ,medicine intermediate, potassium chemicals, synthetic rubber,
ABS resin, food additive dyestuffs and so on

Packages:
Plastic woven bags.
According to customer's requirement.

-Phosphoric acid
-Polyethylene glycol/PEG 400, 600, 1000, 1500, 3000, 6000
Refined Glycerine 99.7% Descripitons

PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD.

Specifications:
Free Fatty Acids (as palmitic) 70% min
Moisture & Impurities 1.0% max
Saponifiable Matter 95% min(basis 97%)

PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD.

Specifications:
Free Fatty Acids (as palmitic) 70% min
Moisture & Impurities 1.0% max
Saponifiable Matter 95% min(basis 97%)

SLES 70% / Sodium Lauryl Ether Sulphate

Properties
Product name: SLES Sodium Lauryl Ether Sulfate
Appearance: White or light yellow viscous paste
Molecular Formula: C12H25O.(C2H4O)2.SO3.Na
Purity: 70%
Usage: detergent,shampoo,soap,textile

Advantages

1. Good cleaning, emulsifying, wetting, densifying and foaming performance
2. Good solvency, wide compatibility, strong resistance to hard water, high biodegradation. low irritation to skin and eye.
Package:

170kg plastic drum, 19.38MT per 20'FCL without pallets
215kg plastic drum, 17.2MTs/20'FCL Palletized

Storage: Store this product in dry and cool place, kept away from sunshine and rain.

Ethyl Alcohol 96,4 percent is the alcohol, which is processed with redistribution of rectified spirit and after added with chemicals, it is treated by activated carbon. This process changes the Ethyl Alcohol into Extra Neutral Alcohol. We can also say that Ethyl Alcohol 96,4 percent is a triple distillated alcohol which contains negligible impurities. It is high on demand for potable use and its quality is passed by Excise Department of every batch. We are the major Ethyl Alcohol Mollasses based Exporters In India. Our Teamss Expertise, indepth Knowledge and Excellent negotiating skills helps us in sourcing best quality product at very competetive prices for our esteemed Buyers.

Iron Oxide has various commercial uses such as iron ores, catalysts, pigments in dental composites; pigments in paints, coatings, colored concentrates. The magnetic properties of iron oxides have been exploited in a broad range of applications including magnetic seals and inks, magnetic recording media, catalysts, and ferrofluids. The steel and iron industries utilize iron oxide as a feedstock to mass produce iron, steel and other alloys.
Sales Specification

Brown Powder (combination of yellow and red)
Relative Coloring powder (compared with the standard): 98% min
Volatile matter @ 105C: 2.5 max
Water soluble matter: 0.2% max
Residue on 45um mesh: 0.5% max
PH of water suspension: 7-9
Oil absorption g/100g: 30-35
Total iron-oxide: 90.0% min
Oil resistance: 5 grade
Water resistance: 5 grade
Alkaline resistance: 5 grade
Acid resistance: 5 grade
Solvent resistance (alcohol resistance methylbenzene resistance): 5 grade
UV absorption: 85% min
Quality Standard

Meet the standard of USP and European Pharmaceutical standard.
Packing

50 LB paper bag.

Sodium Lauryl Ether Sulfate 70% (SLES 70%) is a kind of anionic surfactant with excellent performance. It has good cleaning, emulsifying, wetting and foaming properties. It is soluble in water easily, compatible with many surfactants, and stable in hard water. It is biodegradable with low irritation to skin and eye. SLES70% Widely applied in hair shampoo, bath shampoo, dish detergents and complex soap, it is also used in wetting and clearer in textile industry.

ALLOY 200 STAINLESS STEEL is a ferritic austenitic (duplex) stainless steel, which combines the most beneficial properties of many ferritic and austenitic steels. Because the content of chromium and molybdenum in this steel is very high, it has excellent resistance to spot corrosion, crevice corrosion and uniform corrosion The two-way microstructure ensures that the steel has high resistance to stress corrosion cracking, and the mechanical strength is also high.
ALLOY 200 STAINLESS STEEL is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.
The high chromium and molybdenum content of 2507 makes it have strong resistance to organic acids such as formic acid and acetic acid. Alloy 2507 also has strong corrosion resistance to inorganic acids, especially those containing chlorides.



Product name

ALLOY 200 STAINLESS STEEL
Grade

2507
Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Grade

C

Si

Mn

P

S

Ni

Cr

Mo

200
0.03

0.80
1.2
0.035

0.02

6-8

24.0-26.0

3-5





Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

2507 Stainless steel sheet is a ferritic austenitic (duplex) stainless steel, which combines the most beneficial properties of many ferritic and austenitic steels. Because the content of chromium and molybdenum in this steel is very high, it has excellent resistance to spot corrosion, crevice corrosion and uniform corrosion The two-way microstructure ensures that the steel has high resistance to stress corrosion cracking, and the mechanical strength is also high.
2507 stainless steel is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.
The high chromium and molybdenum content of 2507 makes it have strong resistance to organic acids such as formic acid and acetic acid. Alloy 2507 also has strong corrosion resistance to inorganic acids, especially those containing chlorides.



Product name

2507 Stainless steel sheet

Grade

2507
Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Grade

C

Si

Mn

P

S

Ni

Cr

Mo

2507

0.03

0.80

1.2
0.035

0.02

6-8

24.0-26.0

3-5


Products Display

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

English Name : Ethylene diamine tetraacetic acid (EDTA)
Molecular Fomula : C10H16N2O8
Molecular Weight : M=292.24
CASNo. : 60-00-4

Properties : white crystal powder melting point 240(decomposition) insoluble in cold water ,alcohol and general organic solvent, slightly soluble in hot water, but soluble in sodium hydroxide, sodium carbonate and ammonia solution.

An agent for complexation, EDTA is mainly used for water treatment, as an additive to detergent, a chemical for photography, paper-making and oil-field. It is also used as detergent for boiler cleaning and reagent in chemical analysis.

1. High molecular chemical industry: EDTA is used as polymetization activator for butyl bezene latex, and polyreaction terminator in acrylic fibre production.
2.Daily chemicals: EDTA is used as additive to detergent, skin cream and hair-conditioner.
3.Paper-making: EDTA is used for treating the steamed fibre. It will promote the whiteness of paper and reduce the incrustation in the steamer.
4.Pharmaceutical industry: Through cyclopolymerization with methyl amide, EDTA is made into ethyl amide, a remedy for psoriasis. It is also a stablizer for some vaccines and an antihaemoagglutinin.
5. Textile dyeing and printing: EDTA will promote colour ability of the dyestuff and brightness of the dyed fabric.

Package of Disodium edta zinc chelated

Packing: 25KG/bag , Pearly membrane compound bag, with PE inside or according to the customers demand.

Storage: Stored in the dry and ventilated inside storeroom, prevent direct sunlight, slightly pile and put down.

Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48


Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.

Stearic Acid CAS No.: 57-11-4
Chemical Formula: C18H36O2 CH3(CH2)16COOH
Molecular Weight: 284.48


Properties: Pure product is small pieces of wax crystals in white with slightly luster
Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.