Scope
Petroleum product sulfur content analyzer (x-ray spectroscopy) is in accordance with people's republic of china standard gb / t11140, gb / t17040, astm d4294 requirements specified in design and manufacture of this instrument for the determination of trace sulfur content of petroleum products. Because it uses physical analysis methods, with fast analysis without complicated sample pretreatment, high precision, human error is small, low labor intensity of operators, no pollution, it has been widely used and generally replace other measuring sulfur in the international arena the analytical method.
Features
1, with full english operating system, the man-machine interface friendly exchanges.
2, short detection time, automatic test results within 30 seconds; automatic c / h ratio correction, for a variety of samples;
3, large-screen lcd, automatic print measurement data;
4, using the x-ray tube excitation, the instrument can be long-term use, without affecting the source attenuation;
5, the use of physical methods, the analysis does not touch, do not destroy the sample, no chemical reagents;
6, instrument with integrated design, easy maintenance;
Technical parameters
1, the scope of analysis: s analysis range can be adjusted by the calibration curve of the selected method.
2, the scope of analysis width: s% max-s% min=9.999%; such as oil: s: 0.001 ~ 9.999%.
3, the inherent error, accuracy of analysis: such as oil: in line with the national standard gb / t 17040, at the same time meet the relevant requirements of american national standard astm d4294.
4, system analysis time: 1 to 999 seconds, the recommended value of 60 seconds.
5, detection limit: 10ppm
6, using the conditions: ambient temperature: 5 ~ + 40 ?, relative humidity: =85% (30 ?), power supply: 220v ± 20v, 50hz.
7, total power consumption:
Scope
FDQ-0301 laser particle size analyzer based on physics Fraunhofer diffraction and Mie scattering theory basis. This theory can be simply understood as: travels in straight lines parallel laser beam blocking particles encountered in the communication process, the phenomenon of diffraction and scattering, and small angle light scattering large particles, small particles of light scattering angle is large.
Figure 1-1 shows the diffraction pattern formed by individual particles, the larger the particle diameter, the smaller the center of the bright ring, the smaller the particle diameter, the larger the center of the bright ring. Use photo detector array receiving light at different angles, for the corresponding angle, its energy is set corresponding to the diameter of the particles occurs diffraction (scattering) caused by the respective other angle light will reflect the strength of the corresponding diameter of the particles throughout the assembly of particles occupies proportion, according to the intensity of the received scattered light at different angles, you can perform anti-particle distribution of the sample between the relative content and various size fractions.
Features
1. Up to 82 sampling channels to improve the resolution of the test results; all the photovoltaic device fabricated on a single silicon chip, to ensure the life of the photovoltaic array; cross-sector arrangement, increasing the light receiving area, improves the sensitivity ;
2. micro injection method, using a peristaltic pump automatic loop injection mode, using siphon pump automatic cycle injection mode, to meet different customer test requirements, the instrument comes standard MS-01 micro-injector device;
3. The single lens full scale measurements, all optical components are mounted on reinforced base before fastening a good optical system is shipped, the instrument more stable performance;
4. Imported semiconductor lasers, has a long life, stable optical parameters, not afraid of vibration and a series of advantages, continuous working time of up to 24 hours, to meet user requirements for large continuous load test.
Technical Parameters
1, the test range (um): 0.15-400; (0.4-1100,0.1-450,0.25-650, 0.4-1100)
2. Repeatability:
Scope
The instrument used by the gb / t265-88, iso3104, astmd445, ip71 requirements, determination of liquid petroleum products (newton liquid) kinematic viscosity in units of m2 / s, usually mm2 / s in practice. Dynamic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid.
Features
1, innovation introduced the us imports xecom data processing chip, fast and accurate data processing
2, large-screen lcd display, english prompts input interface, easy operation, quick
3, automatic detection, automatic extraction experiment, automatic detection, automatic calculation, automatic storage,
4, fld special photoelectric detection system, high-precision test results
5, configuration, self-diagnosis and protection function, easy maintenance
4, the detection member is a separate standard configuration, ready to install and uninstall detection unit for easy inspection, cleaning, storage and future upgrades
Technical parameters
1, display: tft true color large screen display
2, the detection system: fld special detection equipment, high temperature resistance, corrosion resistance, high stability
3, chip processing: us chip imports xecom
4, detection method: an infrared detector, automatic detection
5 power supply: ac 220v ± 10%, 50hz
6, temperature control point: 40 ?, 50 ?, 80 ?, 100 ?, temperature control accuracy: ± 0.1 ?
7, the results of printing: automatic print report
Property / tests, Unit,Limits
Ash content, Mass %,0.01 max
Cetane index, Number,48 min
Colour, astm, Number,2.5max
Cu corrosion / 3 hr @ 100 ,c number,1.0 max
Density @ 15 ,c, Gm / ml,0.820 – 0.860
Flash point, ,c,62min
Water content, Vol %,0.05 max
Distillation recovery
At 350 deg c. Min, ,c,89
Pour point max, ,c,Zero max
Total sulphur, Wt%,0.5 max
Kinematic viscosity at 40 ,c,Cst,2.0 – 5.0
Conradsob carbon residue,Wt%,0.10 max
Total acidity,Mg koh/gm,0.10 max
Sediment % wt. Max,Wt%,.01
Light Cycle Oil (LCO) is a valuable petroleum product derived from the refining process. It falls between heavy fuel oil and diesel in terms of density and viscosity, making it a versatile component for various applications. LCO is primarily used as a blending agent for diesel fuel, enhancing its quality and performance. Additionally, it serves as a feedstock for petrochemical processes, contributing to the production of lubricants and other high-value products. With its relatively low
sulfur content and efficient combustion properties, LCO plays a significant role in meeting energy demands while adhering to environmental regulations in the
petroleum industry.
East Siberia Pacific Oil (ESPO) is a major pipeline system in Russia, crucial for transporting crude oil from Eastern Siberia to the Pacific Ocean. Stretching over 4,188 kilometers, it plays a pivotal role in Russia's oil exports to Asia-Pacific markets, including China, Japan, and South Korea. ESPO enhances Russia's energy security and strengthens economic ties with its Asian neighbors, contributing significantly to the country's energy diplomacy and geopolitical influence. With its strategic importance in global oil trade and ongoing expansion projects, ESPO remains a cornerstone of Russia's energy infrastructure, facilitating the flow of resources to meet growing regional demand.
Product Description
Crude oil is a naturally occurring petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil is refined to produce usable products including gasoline, diesel, and various other forms of petrochemicals .Like Bonny Light Crude oil , Rebco / Espo..
Origin :-, Russia , Saudi Arabia , Iraq
JoCamDeal Inc is a trusted global supplier of Crude Oil, sourced from reliable producers and oil fields. We deal in various grades, including light sweet, heavy crude, and sour crude, depending on refining needs and regional specifications. Our crude oil is ideal for refining into fuels such as gasoline, diesel, jet fuel, and petrochemical products. We ensure consistent quality through thorough testing for API gravity, sulfur content, and water impurities. With robust logistics and secure transport options via tankers or pipelines, we provide flexible delivery to international ports. JoCamDeal Inc guarantees dependable supply chains, transparent processes, and competitive pricingâ??making us a preferred partner for refineries, traders, and bulk buyers worldwide.
SN 150 (LVI)
SN 150 (blend, VI 95+)
SN 350
SN 400
SN 500
BS (23-26cst)
BS 150 (28-34cst)
VHVI-4 Tatneft (VI 120+, typically around 130-133)
VHVI-6, VHVI-8 with VI 114-120
Base oil 150N is defined as a light base oil at the lower end of the specification compared to a Class II light base oil. They are mainly used in the production of lubricating additives and lubricants. . Because it is a Group II base oil, it has undergone hydrocrack treatment steps to remove any impurities.
32875 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
