Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.



Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,

Content
Pb â?¥ 99.99 %

Density
11.34 g / cm 2

Color
Bluish

Weight
35 kgs / lump, 55 kgs / lump

Dimension
21" x 4" x 2.5"

Package
Standard Sea-worthy package, fixed by belt per ton

Shape
Rectangular Lump


Application

lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps

cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil

Container Size

20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter
40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter
40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.

We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity

We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

Non-ferrous metals are high-quality metals that contain little or no iron, offering excellent corrosion resistance, lightweight properties, superior electrical and thermal conductivity, and exceptional durability. Common non-ferrous metals include aluminum, copper, zinc, lead, nickel, tin, titanium, and brass. These metals are widely used in electrical, construction, automotive, aerospace, marine, packaging, and industrial manufacturing sectors. Available in various grades, forms, and specifications, they provide reliable performance, easy fabrication, and long service life for diverse industrial applications worldwide.

Key Specifications
Material: Non-Ferrous Metals
Available Metals: Aluminum, Copper, Brass, Bronze, Zinc, Nickel, Tin, Lead, Titanium
Forms: Ingots, Sheets, Plates, Rods, Bars, Pipes, Tubes, Coils, Wires
Purity: 95% - 99.99% (depending on metal)
Surface Finish: Mill Finish, Polished, Anodized, Coated
Thickness: Customized as per buyer requirements
Dimensions: Standard and custom sizes available
Origin: As per customer requirement

Steel alloys are premium-grade engineered metal materials produced by combining steel with alloying elements such as chromium, nickel, molybdenum, manganese, and vanadium to improve strength, corrosion resistance, wear resistance, and heat tolerance. These alloys are widely used across construction, automotive, aerospace, energy, marine, heavy engineering, and manufacturing industries. Available in multiple grades, dimensions, and finishes, steel alloys offer excellent mechanical performance, long service life, superior machinability, and reliable durability for demanding industrial and structural applications.

Key Specifications
Material: Alloy Steel
Alloying Elements: Chromium, Nickel, Molybdenum, Manganese, Vanadium
Form: Bars, Rods, Sheets, Plates, Pipes, Tubes, Billets, Forgings
Grade: 4140, 4130, 4340, 8620, EN19, EN24, AISI, ASTM Grades
Tensile Strength: 600 - 1,500 MPa
Hardness: 180 - 650 HB (depending on grade)
Surface Finish: Hot Rolled, Cold Rolled, Bright, Annealed
Length/Size: Customized as per customer requirements

Zinc Dross

Available Zinc bottom dross in small pieces from pipe fitting galvanizing company.
Quantity available : 100-120mts

Zinc Ash

Grade - Q235/Q235B/Q345/Q345B/SS400
Technique - Hot rolled/Welded
Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc
thickness - 0.5mm-12mm(+/-0.1mm)
OD - 15*15mm-400*400*mm(+/-0.1mm)
Length - according to the customer's requirement
Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated
Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Size : 5,5 mm-25 mm production range
Weight min. 2050 max 2400 kg
Outside diameter 1250 mm
Internal diameter 850 mm
Height 1700-2200 mm

Metal Derivative Products

Ferrous & non-ferrous scrap

TATA AGRICO Mild Steel Electrode ISI Grade Radiographic Quality MSE046
Electrodes

Achieve superior welding results with the Tata Agrico Mild Steel Electrode ISI Grade Radiographic Quality, engineered for exceptional performance and reliability, making it the ideal choice for critical applications where a radiographic quality weld deposit is required.

Technical Specification:
Material Description 2.70 X 450 mm
Quantity Quantity in Master Box: 12 Packets
Standard Packaging 90

TATA AGRICO Mild Steel Electrode ISI Grade Radiographic Quality

TATA AGRICO Mild Steel Electrode ISI Grade Radiographic Quality MSE045
Electrodes

Achieve superior welding results with the Tata Agrico Mild Steel Electrode ISI Grade Radiographic Quality, engineered for exceptional performance and reliability, making it the ideal choice for critical applications where a radiographic quality weld deposit is required.

Technical Specification:
Material Description 2.70 X 350MM
Quantity Quantity in Master Box: 12 Packets
Standard Packaging 90

TATA AGRICO Mild Steel Electrode ISI Grade Radiographic Quality MSE044
Electrodes

Achieve superior welding results with the Tata Agrico Mild Steel Electrode ISI Grade Radiographic Quality, engineered for exceptional performance and reliability, making it the ideal choice for critical applications where radiographic quality weld deposit is required.

Technical Specification:
Material Description 3.70 X 450 mm
Quantity Quantity in Master Box: 12 Packets
Standard Packaging 60

TATA AGRICO Mild Steel Electrode ISI Grade Radiographic Quality MSE042
Electrodes

Achieve superior welding results with the Tata Agrico Mild Steel Electrode ISI Grade Radiographic Quality, engineered for exceptional performance and reliability, making it the ideal choice for critical applications where a radiographic quality weld deposit is required.
Technical Specification:
Material Description 2.90 X 350 mm
Quantity Quantity in Master Box: 12 Packets
Standard Packaging 90