Find Verified Lubricant Additives Suppliers, Manufacturers and Wholesalers

Guru Corporation is largest Manufacturer of 91% Concrete Additive Silica Fume in India With its Brand Name G-Chem. Guru Corporation has strong position to supply Micro silica at different grades for different usages on a global scale. Micro Silica is a super pozzolana or a finely powdered material used for providing strength and durability in concrete mix.

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINETM are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures

Producing mass concrete for raft and pile foundations

Low water to binder rations for high performance concrete

Better retention of workability and faster initial strength gain

High Strength construction work in low or high temperature weather

Benefits
Increase compressive strength ,permeability, workability of concrete

Improves the durability of concrete

It can be used in waterproofing as an additive

It can decrease the heat of hydration

Resistance against saltwater & chemicals

Non-Toxic, Eco friendly

Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete

PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement,G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.SAFETY INFORMATION / DECLARATION

Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in an accredited l

Product Information:

European Based Finest filler & additive

G FINE ULTRA FINE EROPEAN BASED FINEST FILLER

G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.

Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or werehouse .

Health and Safety:

Extensive testing has shown G FINE to be non-toxic and environmentally benign. No known significant health risks are associated with G FINE but high concentrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Important Notice:

GURU CORPORATION products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of Goods and Service.

PLEASE NOTE:

T

Origin: VIET NAM
Brix (%): 5 %
Additives: none
Fructose: 40% Min
HMF: 20 mg/kg max
Reducing Sugar (%): 65 %
Sucrose: 0.8% â?? 5% Max
Moisture (%): 18 % Max
Diastase Activity (%): 8 % ml (g.h)
Shelf Life: 18 months
Certification: HACCP, ISO, GAP, EEC
Packed: 290kg steel drums or 250g, 400g, 500g mason jar, bottle or customized
Supply Ability: 1200 Tons/ Year. MOQ: 19 Tons = 1x20ft.
Price: (revert me back for instant quote)
Payment & delivery:
L/C at sight or T/T in advance 30% and 70%, negotiable.

Product Grade: Industrial / Lubricant Grade Base Oil

Minimum Price (USD): Price on Request

Maximum Price (USD): Price on Request

Price Units: Metric Ton / Barrel

Incoterms: FOB / CIF / CFR

Product Detailed Description:
Base Oils are refined petroleum products widely used as the main raw material for manufacturing lubricants, engine oils, gear oils, hydraulic oils, industrial oils, greases, and other oil-based products. They provide essential lubrication properties such as viscosity, stability, smooth performance, and protection for machinery and engines. Atlantic Energies supplies quality Base Oils through reliable supplier networks to meet the requirements of lubricant manufacturers, industrial buyers, and global oil traders.

Minimum Order Qty: As per buyer requirement / Bulk order basis

Units: Metric Ton / Barrel

Packaging Details:
Supplied in bulk tankers, flexitanks, drums, IBC tanks, or as per agreed delivery terms.

Production Capacity:
As per supplier availability

Country Where Product Is Manufactured:
As per supplier origin / Contract terms

Sample Available:
Yes

Sample Cost Born By:
Buyer

Seller Product Code:
AE-BASE-OIL

Product Standards:
International Base Oil Standards / Contract Specifications

Brand:
Atlantic Energies

Model No.:
BASE-OIL

HS Code:
271019 / 27101999

Key Specifications

Key Specifications 1:
Refined petroleum base oil suitable for lubricant and industrial oil manufacturing.

Key Specifications 2:
Used in engine oils, hydraulic oils, gear oils, greases, industrial lubricants, and blending applications.

Key Specifications 3:
Available in different grades and viscosity ranges depending on supplier specifications and buyer requirements.

Key Specifications 4:
Available for bulk supply with FOB, CIF, or CFR delivery terms based on destination and order quantity.

Key Advantages

Key Advantage 1:
Essential raw material for producing high-quality lubricants and industrial oil products.

Key Advantage 2:
Reliable supply support for lubricant manufacturers, oil blenders, and industrial buyers.

Key Advantage 3:
Quality inspection and product documentation can be arranged as per contract terms.

Key Advantage 4:
Flexible packaging, quantity, and shipment coordination available as per buyer requirements.

We are one of the leading manufacturer and supplier of 95% Ladle Additive For Gas Remover. We obligated to meet the quality standards as per the customer demand.

Physical State Powder

Grade Standard Reagent Grade


Packaging Size 25 Kg


Usage / Application Industrial


Packaging Type Bag


Color Grey


Shelf Life 1 Year


Purity 95%


Minimum Order Quantity 100 Kg

Microsilicates are used as an additive in cement premixes or concretes,

Oil Lubricating Screw Compressor

We are one of the leading manufacturer and supplier of 95% Ladle Additive For Gas Remover. We obligated to meet the quality standards as per the customer demand.

Product Information:

European Based Finest filler & additive

G FINE Micro FINE ULTRA FINE EROPEAN BASED FINEST FILLER



G FINE is a new generation supplementary cementitious material (SCM) with a built-in high tech content. In spite of its high fineness it does not increase water demand at the dosage range of 5 to 15 percent of normal OPC in general. In fact concrete slump is seen to be improved, due to the dense packing of cementitious material, producing low void content. The use of G FINE results in hydrated cement matrix to comprise of very small pores.

G FINE is a specially processed product based on high glass content with high reactivity obtained through the process of controlled granulation. The raw materials are composed primary of low calcium silicates. The processing with other select ingredients results in controlled particle size distribution. G FINE can also be used as a high range water reducer to improve compressive strength or as a super workability aid to improve flow.

G FINE can be used as practical substitute for Silica Fume as per the results obtained. If the advantages of G FINE are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as that of Silica Fume.


Where to use G FINE :

Residential, roads, airports, commercial building. Producing mass concrete structures and pile. In high-rise structures the concrete is to be pump easily. Low water to binder ration for high performance concrete. Precast concrete element for heavy structures precast units. To improved initial strength and increase faster . Better retention of workability and improved strength gain.

Benefits of G FINE :

The workability of the mix retention is improved Improve durability and permeability of concrete Increased strength of concrete Reduction in segregation can be observed in the mix Reduction in heat of hydration of the mix Non- toxic , eco friendly cost effective, economical solution

G-FINE

Packaging:

G FINE is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25kg plastic lined bags.

Storage:

G FINE when stored correctly has an indefinite shelf life. Like cement, G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo Or warehouse .

Our Product
Item: Soy Feed Additive - Peptide Powder Enzymes
Origin: Taiwan
Colour: Yellow
Smell: -
Packing: 25/50Kg Pp
Monthly Supply: 1,000mt

**Soy Lecithin -Food Additive (Premium Quality)**

Our premium soy lecithin is a high-quality, natural emulsifier derived from carefully processed soybeans. It is widely used in the food industry to improve texture, stability, and mixing properties in a variety of products.

Soy lecithin helps blend oil and water-based ingredients smoothly, enhancing consistency and shelf life in food formulations. It is a versatile ingredient suitable for both industrial and commercial applications.

**Key Features:**

* 100% natural soy-derived emulsifier
* Excellent blending and stabilizing properties
* Improves texture and product consistency
* Widely used in food manufacturing
* Suitable for various food applications

Perfect for chocolate, bakery products, margarine, confectionery, beverages, and processed foods, soy lecithin is a reliable and functional food additive for modern food production.

PP-MFI (Polypropylene- MFI) Granules

Our PP-MFI Increaser Additive is to be used only for PP based material ( Homo PP, BOPP, Raffia, PPCP, Random PP, Battery scrap PP ) to increase MFI from 10 to 40+ / 50+ ( In South Africa one our client have achieved MFI 61+)in Recycled PP.

Mostly used in Recycle / Virgin Polypropylene in Compounding, Moulding, Extrusion process etc. By using this additive, Output of final product may increase from 10-20 , and saving Electricity on continue process, and Useful to balance the MFI of different grades of PP waste /Recycled PP / Virgin PP without any changes of it's Specification parameters & Mechanical Strength properties too.

This additives is being used by Recyclers of Raffia, Battery Scrap, Household molded items, Chair manufacturers, PP- Compounding, and many more to increase MFI. The Loading is 100 grams in 100 kg, batch material.

Animal feeds & Additives

Magnesium Sulphate
Magnesium Oxide
Manganese Sulphate
Manganese Oxide
Zinc Sulphate
Zinc Oxide
Feed Enzymes

Product Description

Neopentyl Glycol (NPG) is an important organic chemical raw material and synthesis intermediate. It is widely used in the production of unsaturated polyester resin, polyester resin, alkyd resin, powder coating resin, polyurethane materials, plasticizers, lubricant additives and other fine chemical products.

With good chemical stability, thermal stability and hydrolysis resistance, NPG is suitable for high-performance coatings, resins, plasticizers and synthetic lubricants. It helps improve weather resistance, water resistance, gloss retention and yellowing resistance in coating and resin applications.

Sodium polyacrylate is a white powder. Odorless and tasteless. Very hygroscopic. Polymer compounds with hydrophilic and hydrophobic groups. Slowly dissolves in water to form a very viscous transparent liquid. The viscosity of its 0.5% solution is about Paâ?¢s. The viscosity is not caused by water absorption and swelling (such as CMC, sodium alginate), but due to the many anionic groups in the molecule. The ionic phenomenon causes the molecular chain to grow and the viscosity increases to form a highly viscous solution. Its viscosity is about 15-20 times that of CMC and sodium alginate. Heat treatment, neutral salts, and organic acids have little effect on its viscosity, but when it is alkaline, the viscosity increases. Insoluble in organic solvents such as ethanol. Strong heat to 300 degrees does not decompose. The long-term viscosity changes very little, and it is not easy to decay. Because it is an electrolyte, it is susceptible to the influence of acid and metal ions, and the viscosity is reduced.

Sodium Stearate
Sodium stearate is a white oily powder with a slippery feel and fatty odor.

Soluble in hot water or hot alcohol.

The aqueous solution is alkaline due to hydrolysis and the alcoholic solution is neutral. Produced by the interaction of octadecanoic acid and sodium hydroxid.

Used in toothpaste manufacturing, also used as water repellent and plastic stabilizer.

polyisobutylene (PIB) character:
Polyisobutylene (PIB) is a colorless, odorless, non-toxic viscous or semi-solid substance.

Polyisobutylene (PIB) Application:
Polyisobutylene (PIB) has important applications in lubricating oil additive, polymer material post-processing, cosmetics and other fields.

Lubricants are specially formulated fluids or semi-solid substances designed to reduce friction, wear, and heat between moving mechanical parts. They play a critical role in improving the efficiency, performance, and lifespan of engines, industrial machinery, and equipment.

Manufactured using high-quality base oils and advanced additive technologies, lubricants ensure smooth operation under varying temperature and load conditions. They are widely used across automotive, industrial, marine, and heavy-duty applications.

Specifications :

Base Oil Type: Mineral / Synthetic / Semi-synthetic
Appearance: Clear to amber-colored liquid (varies by grade)
Viscosity Grade: ISO VG 32 to 680 (industrial) / SAE grades for engine oils
Viscosity Index (VI): Typically 90 - 150+
Density: ~0.80 0.90 g/cm at 15 °C
Flash Point: 180 °C- 250 °C (depending on formulation)
Pour Point: ~ -10 C to -30 C (low-temperature flow ability)
Water Content: 0.1%
Additives: Anti-wear, anti-oxidant, anti-corrosion, detergent, dispersant
TBN (for engine oils): As per specification (varies by grade)
Sulphated Ash: Controlled as per industry standards
Application: Automotive engines, hydraulic systems, gear systems, compressors, industrial machinery

Lubricants & lubricating oil

Industrial Lubricants
Automotive Lubricants
Marine Lubricants
Greases
Coolants
Brake Fluids

Lubricants :

A. Industrial Oil
B. Lubricant Oil
C. Process Oil
D. Automative Oil
E. Waxes
F. Greases

Product Description : Based On Client Requirements,
Price Of Product ( Usd Price Or Fob Price) : As Per Product Data,
Product Origin : India
Key Specifications/special Features : Based On Client Data / Specifications
Minimum Order Size And Packaging Details : As Per Client Requirements And Type Of Equipment

Calcium Stearate (CAS 1592-23-0) is a superfine, white, odorless powder with a slippery texture. It is insoluble in water (waterproof), stable, and has a melting point of approximately 165�°C.


Handling and storage: store in tightly closed containers in a cool, well-ventilated area, away from oxidizers and acids. Use PPE (splash goggles, gloves, dust respirator) and avoid inhaling dust.

Add the pulp generously to give it a rich texture It is a more attractive pesticide-free raw strawberry juice.

Made with only organic sugar in locally grown pesticide-free strawberries No additional additives, such as purified water, are included in the fruit juice.

It is enough to feel the sour and sweet taste of the fruit. Sweet and sour fruit cheong can be drunk as tea, and can be used as jam or spread.

Cool aid with cold carbonated water, and when the cold wind starts to blow, fruit cheong is added As a warm tea, enjoy freely according to the symbol.

CUTTINGOIL
Provide lubrication to the cutting tool and work piece, u hich helps to improve the movement of the tool and reduce wear and tear on the machinery.
APPLICATION
Provide lubrication to the cutting tool and work piece, which helps to improve the movement of

the tool and reduce wear and tear on the machinery.

BENEFITS

Low energy costs. The cooling feature of the cutting fluid and its lubrication effect is essential in lowering energy costs.
Prevents rust and corrosion.
Clears metal chips and debris.
Reduces metal to metal contact.
Limits residue formation.

Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems.
APPLICATION
For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil.
Beneftts

Excellent anti-wear protection, oxidation resistance and thermal stability.
Excellent demulsibility facilitates spontaneous separation of the oil from water ingress.
Low pour-point enables a wide range of application at different temperatures.
The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency.
The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.

Lubricating oil, at times, basically termed as a lubricant, or lube is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motor-powered vehicles, where it is identified explicitly as motor oil and transmission fluid.

Uses of lubricating oil
It prevents the metal surface corrosion-
It helps in controlling the friction between load-bearing surfaces-
Helps in reducing the temperature by carrying away heat from friction and combustion of fuel
Benefits Of Lubrication
Keep Friction And Wear At Bay
Protect Equipment
Enhance Temperature Control
Improve The Life Span, Efficiency And Reliability Of Machinery
Reduce The Downtime And Costs Associated With Maintenance And Repair
Your Ideal Lubrication Solution
Properties of Lubricating Oil
Viscosity. Viscosity is a method of the flow capability of oil under a specific temperature and density
Oxidization. A lubricant should not oxidize the working parts.
Colour. This assessment is not so significant apart from inspecting the consistency of any given grade of oil.
Sulphur Content. Sulphur in a destructive form is unfavorable in lubricating oil. Thus its existence should be eluded.
Neutralization Number. Oil may comprise contaminations, if not detached during purifying, which have a venomous influence on the properties of the oil.

Scope Centex Marine Engine Oil 6 TBN & 9 TBN
Scope Centex Marine Engine Oil 12 TBN & 15 TBN
CENTEX Heavy Duty Marine Engine Oil

SCOPE Centex Marine System oil is premium quality lubricant for cross head diesel engine crank case system. It is especially effective in highly rated cross head engines with oil cooled pistons, power take- off (PTO) gear applications.
Main Benefits

Good Alkinity
Excellent resistance to corrosion.
Excellent detergency keeps crankcase and under piston spaces clean.
Good oxidation stability.

Application

SCOPE Centex Marine system oil of 6 TBN & 9 TBN can be used for crank case lubrication of high power low speed cross head marine diesel engines. It can be used in stationery diesel engines for power generation and reduction gear boxes.

Franchise opportunity for Marine Lubricants

Our aspiration is to build strong and mutually beneficial relationships by appointing Exclusive Distributors world-wide, on a long-term basis. Our expertise in Genuine Spare Parts ( For Cars & Trucks) + Lubricants can be a unique business proposal to distributors across the world. We can also entertain deal-to-deal enquiries for specific grades.



Ghassan Aboud Auto Spare Parts & Petrochem FZE are based in Jebel Ali Free-zone, Dubai, UAE, we export Genuine Spare Parts across 80 countries in the world.
In our efforts to meet growing customer demands and provide a complete solution to them, we have diversified into the field of Lubricants.

Franchise opportunity for automobile lubricants in bulk

Passenger Car
Engine Oils- Fully
Synthetic/Synthetic and Mineral based
Diesel Engine Oils
Gear & Transmission Oils
Agricultural Oils
Brake Fluids
Radiator Coolants
Railroad Engine Oils
Shock Absorber & Front Fork Oils
Motorcycle Oils

Our aspiration is to build strong and mutually beneficial relationships by appointing Exclusive Distributors world-wide, on a long-term basis. Our expertise in Genuine Spare Parts ( For Cars & Trucks) + Lubricants can be a unique business proposal to distributors across the world. We can also entertain deal-to-deal enquiries for specific grades.



Ghassan Aboud Auto Spare Parts & Petrochem FZE are based in Jebel Ali Free-zone, Dubai, UAE, we export Genuine Spare Parts across 80 countries in the world.
In our efforts to meet growing customer demands and provide a complete solution to them, we have diversified into the field of Lubricants.

Franchise opportunity for Industrial Lubricants

General Purpose Machinery Oils
Industrial Gear Oils
Hydraulic Oils
Cutting Oils
Compressor Oils
Open Gear Compounds
Refrigeration Compressor Oils
Pneumatic Tool Oils
Turbine Oils
Transformer Oils


Our aspiration is to build strong and mutually beneficial relationships by appointing Exclusive Distributors world-wide, on a long-term basis. Our expertise in Genuine Spare Parts ( For Cars & Trucks) + Lubricants can be a unique business proposal to distributors across the world. We can also entertain deal-to-deal enquiries for specific grades.



Ghassan Aboud Auto Spare Parts & Petrochem FZE are based in Jebel Ali Free-zone, Dubai, UAE, we export Genuine Spare Parts across 80 countries in the world.
In our efforts to meet growing customer demands and provide a complete solution to them, we have diversified into the field of Lubricants.

Franchise opportunity for automotive lubricants

Passenger Car
Engine Oils- Fully
Synthetic/Synthetic and Mineral based
Diesel Engine Oils
Gear & Transmission Oils
Agricultural Oils
Brake Fluids
Radiator Coolants
Railroad Engine Oils
Shock Absorber & Front Fork Oils
Motorcycle Oils

Our aspiration is to build strong and mutually beneficial relationships by appointing Exclusive Distributors world-wide, on a long-term basis. Our expertise in Genuine Spare Parts ( For Cars & Trucks) + Lubricants can be a unique business proposal to distributors across the world. We can also entertain deal-to-deal enquiries for specific grades.



Ghassan Aboud Auto Spare Parts & Petrochem FZE are based in Jebel Ali Free-zone, Dubai, UAE, we export Genuine Spare Parts across 80 countries in the world.
In our efforts to meet growing customer demands and provide a complete solution to them, we have diversified into the field of Lubricants.

We have established all facilities such as storage of raw material, blending, filling in to small/ big packs, quality control and storage of finished goods all under one roof. We strongly believe in delivering quality product to our customers. We have established and incorporated high quality standards

OUR INDUSTRIAL LUBRICANTS PRODUCT RANGE

HYDRAULIC OIL
GEAR OILS
TURBINE OIL
COMPRESSOR OIL
REFRIGERATION OIL
SLIDEWAY OIL
SPINDLE OILS
SUGAR MILL ROLL-BEARING OIL
Heat Transfer Oil
Cylinder Oil
Vacuume Oil

TARGET 4500 CF-4 engine oils are blended from highly refined base stocks and selected additives to provide excellent detergency, dispersancy, and anti-wear properties. The High Base Number provides superior level of reserve alkalinity to protect vital engine parts against corrosion and premature engine wear. They offer longer drain capabilities in high output turbo-charged Diesel engines operating under severe service conditions.

APPLICATIONS

TARGET 4500 CF-4 oils meet the requirements of most high-speed Diesel and gasoline engines of mixed fleets.
Recommended for commercial road transport, high RPM Generator sets and sea transport.
BENEFITS

TARGET 4500 CF-4 engine oils reduce piston deposits, provide protection against cylinder bore polishing, reduce oil consumption, reduce filter plugging, offer very low oxidation and consequent thickening due to high TBN levels present which neutralize corrosive acids resulting from oxidation.
PERFORMANCE STANDARDS

SAE 20W50

API CF-4

TYPICAL KEY PROPERTIES

TARGET 4500 CF-4 20W/50
Kinematic Viscosity
@100C, cSt ASTM D445 : 19.5

Viscosity Index
ASTM D2270 : 125

Flash Point (COC), C
ASTM D92 : 225

Pour Point, C
ASTM D97 : -21

Total Base Number,
mgKOH/g ASTM D2896 : 13

Sulphated Ash%Wt
ASTM D874 : 1.4

Minimum Order Size : order size must be one container

Packaging details - flexi bag, bottles

TARGET MARSHAL ADVANCE Formula are premium multi-grade API CF/SF universal type crankcase oils specifically designed for use in a wide range of Diesel and gasoline engines. They are formulated with highly refined base stocks and a Package Additive System of anti-wear, anti-oxidant, rust-preventive, detergent, dispersant and de-foaming agents. MARSHAL 4000 engine oils offer remarkable tolerance towards the sulphur content in the fuels.





APPLICATIONS

Ideal for naturally aspirated and some moderately turbo-charged Diesel engines operating on fuels with sulphur contents as high as 1.5 mass percent without the need to adjust drain intervals to ensure optimum engine life and performance.
Suitable also for Caterpillar pre-combustion type engines.
Also recommended for use in many non-engine applications in highway, construction and agricultural equipments such as transmission, final drives and hydraulic system of Caterpillar tractors.
PERFORMANCE STANDARDS

API CF/SF

US MIL L-2104

Minimum Order Size : order size must be one container

Packaging details : flexi bag, bottles

TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions.



APPLICATIONS
TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars.

BENEFITS

Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars.
Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection.
Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions.
Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment.
Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures.
Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade.
PERFORMANCE STANDARDS

SAE 5W-30

API SN/CI-4

Minimum Order Size : order size must be one container

Packaging details : flexi bag, bottles

TARGET FLEET SUPER 5000 CH-4/SJ engine oils are blended from highly refined base stocks and selected additives to provide excellent detergency, dispersancy, and anti-wear properties. The High Base Number provides superior level of reserve alkalinity to protect vital engine parts against corrosion and premature engine wear. They offer longer drain capabilities in high output turbo-charged Diesel engines operating under severe service conditions.


APPLICATIONS

TARGET FLEET SUPER 5000 CH-4/SJ oils meet the requirements of most high-speed Diesel and gasoline engines of mixed fleets.
Recommended for commercial road transport, high RPM Generator sets and sea transport.
BENEFITS

TARGET FLEET SUPER 5000 CH-4/SJ engine oils reduce piston deposits, provide protection against cylinder bore polishing, reduce oil consumption, reduce filter plugging, offer very low oxidation and consequent thickening due to high TBN levels present which neutralize corrosive acids resulting from oxidation.
PERFORMANCE STANDARDS

SAE 20W50

API CH-4/SJ

Minimum Order Size : order size must be one container

Packaging details : flexi bag, bottles

TARGET 7000 is a premium quality synthetic formula fortified with advance additive component technology. TARGET 7000 ensured robust and longer service than the conventional oils to provide engine protection, maintain viscosity at high and low temperatures this ensures easy start-up and excellent wear protection at high temperatures. TARGET SUPER 7000 also provides strong protection to engine parts against corrosion and avoid formation of the anti-oxidative characteristics, resist oil degradation and controls oil thickening.

APPLICATIONS

TARGET SUPER 7000 is developed for high speed four strokes turbocharged or naturally aspirated gasoline engines. It is equally suitable for all types of stationary and off road gasoline engines.
High detergency and excellent dispersancy controls deposit at wide temperature ranges keeping engine components clean, removing contaminants from oil supply lines ensuring perfect lubrication.
BENEFITS

Premium quality synthetic formula multi-grade engine oil suitable for modern passenger cars.
Advanced additive and base oil technology ensures protective oil film strength at extreme temperature and load conditions reducing friction between moving parts, enhancing fuel efficiency.
Good thermal and oxidation stability extends oil drain interval and ensures less engine component deposit.
Excellent corrosion protection properties provide relief from rust and corrosion caused by acid formation and extends engine component service life
Uniform Molecular Technology provides protection from cold temperature startup wear, reducing energy losses improving fuel efficiency.
PERFORMANCE STANDARDS

SAE 20W-50

API SL

Minimum Order Size : order size must be one container

Packaging details : flexi bag, bottles

DESCRIPTION

TARGET 4500 SG is a multi-grade; high performance engine oil specially formulated to meet the requirement of 4-stroke engine operated automobiles.

TARGET 4500 SG is blended with specially selected additive system and high quality paraffinic base stocks to withstand very high temperature found in 4-stroke engine's combustion chamber. This oil is designed to give excellent performance for a long period under severe operating conditions

Performance features

SAE 20W-50

API SG

Applications

TARGET 4500 SG is designed for naturally aspirated or turbocharged vehicles operating under moderate to severe working conditions.
Benefits

TARGET 4500 SG is formulated with special antioxidant additive to enhance engine life and increase oil drain intervals.
Equally beneficial for gasoline engine.
Improved piston and ring groove deposit control and reduced wear.

Minimum Order Size : order size must be one container

Packaging details - flexi bag, bottles

TARGET SUPER-DUTY

DESCRIPTION

TARGET SUPER-DUTY is a high performance and more economical option of engine oil for both diesel as well as petrol engines operating under less severe conditions. Blended from good quality base oils with a balanced Additive package is ideal for engines working where extreme climatic conditions and speeds are not a problem.

APPLICATIONS

Suitable for light duty diesel as well as petrol engines working under moderate conditions.
BENEFITS

TARGET SUPER-DUTY provides efficient lubrication over a wide range of except extreme temperatures.

Cost effective, oil of choice for tractors.
PERFORMANCE STANDARDS

API SD/CC

SAE 30, 40, 50

US MIL 2104A

Minimum Order Size : order size must be one container

Packaging details : flexi bag, bottles

TARGET 9000 FULLY SYNTHETIC motor oil is based on Uniform Molecular Technology of full synthetic base stocks that provides a smooth layer of lubricant between the surfaces sliding over each other hence reducing friction and providing ultimate fuel efficiency. The selection of the most advanced additive technology and superior synthetic base stocks provides engine protection to the highest rated RPM engines of sport cars and precisely engineered engines of modern passenger cars operating at extreme temperatures and prevailing through tough driving conditions.

APPLICATIONS
TARGET SUPER 9000 FULLY SYNTHETIC is applicable to all kinds of precisely engineered modern passenger and sports cars.

BENEFITS

Hi-tech and most advanced additives & fully synthetic base oils technology ensure ultimate engine protection at peak performance and is specially suitable for high performance modern passenger cars.
Advanced synthetic technology maintains oil fluidity at low temperatures keeping engine components lubricated allowing easy start-up and maximum engine protection.
Outstanding shear stability and high viscosity index extends engineâ??s service life by maintaining protective oil film at extreme temperatures, heavy load and high speed conditions.

* Advanced uniform molecular technology minimizes oil consumption, reducing deposition on engine components and oil supply lines helping maintain fuel economy and a cleaner environment.

* Protects engine over a wide temperature range, ensuring less engine downtime with reduced maintenance cost, enhancing fuel economy and engine efficiency at lower oil temperatures.

* Active anti-sludge agent increases oil drain interval, keeping the engine clean for longer periods, removing chances of oil starvation due to filter blockade

PERFORMANCE STANDARDS

SAE 5W-30

API SN/CI-4

Imperial Lubricants

Engine Oils
Natural Gas Engine Oils
Hydraulic & Compressors
Gear Oils
Industrial Oils
Transmission Fluids
Grease

Polymer additives:

accelerators
cobalt-free accelerators
electroconductive carbon blacks
promoters
inhibitors
release agents
high performance concentrates .
flame retardant synergists
Armowax processing aid

Sodium Stearoyl Lactylate (SSL)

Ice Cream Stabilizer

Polyglycerol Polyricinoleate (PGPR)

Carboxymethyl cellulose sodium(CMC)

For price, specification and other details please contact us.

Aurora Industry Co.,Ltd. (AUCO) provides highly quality and functional feed additives to ensure the animals remain healthy. We work closely with our partners to bring solutions to poultry, livestock and aquaculture industries.

Request an online quotation for plastic additives via our website at:

Plastic additives are used to enhance product processing to improve product appearance, properties, absorb odors, and decrease cost.

Food additives are substances added to food to preserve flavor or enhance taste, appearance, or other sensory qualities.
such as sucralose ,vanilla powder,vanillin,and so on

Additive Manufacturing revolutionized the way products are designed which heralds new paradigms in design! Disruptive!!! It is an effective tool to compress product development time and hence gives edge over the competitors. We create value for our customers by redesigning parts for weight reduction, complicated machining, parts consolidation. Additive manufacturing allows to improve functional performance of the components, achieve complex geometry and gradient matrix. We have a complete ecosystem to support Metal 3D printing process.

Feature
Metal Lubricant performs anti-rust, lubricating, dehumidifying, decontaminating and eliminating the noise of machinery or other metals, etc., and has a magic effectof uncoiling rust, swiftly looses the rusted screws.
It can be widely applied to the precision instruments, contacting points of electronic appliances, steel accessories and high sensing elements etc.

Advantage
Remove all kinds of rust /magic effect of uncoiling rust /penetrate lubricant oil
extra anti- rust/keep lubricating/Eco- friendly

Application
1. Infiltrates the areas of rust in a short time;
2. Eliminates the noise caused by rubbing between spare parts or movable fittings;
3. Lubricates and protects all kinds of machines, removing humidity and preventing rusting.