Find Verified Lead Plates Suppliers, Manufacturers and Wholesalers

Down lead clamp for tower

The down lead clamp is used in rivet the fiber when jumping or down lead , and it was commonly installed every 1.5 to 2 meter each set.

Mark & model : f21.3mm~f3000mm material: a105, st37.2, s235, a350lf2, c22.8, s400, sq235, a694, 304, 304l, 316, 316l etc.
Origin : asia and pacific area china
Quality standard : international
H.S.Classification : metal articles articles of iron or steel 7307 tube or pipe fittings, of iron or steel

So far forever has already had many sucessful cases for plate heat treatment furnace, such as thickness 46 plate heat treatment furnace, thickness 100 plate heat treatment furnace, thickness 150 plate heat treatment furnace.

Plate heat treatment furnace features
1.Heating way: magnetic induction heating
2.Water cooling system:closed cooling tower
3.Control system:plc siemens control device
4.Temperature adjustment: automatic

Plate heat treatment furnace advantages
1.Produce process is easy to operate, charge in and discharge flexibly, high degree of automation, realize produce on line.
2.Fast speed of workpiece heating, less oxidization or decarburization, high efficiency, and quality forging piece.
3.High control accuracy of workpiece length, speed, and temperature.
4.Good heat uniformity of workpiece, small temperature difference on core surface, high control accuracy.
5.Integration design of inductor and furnace body, quick-change connector for different inductors, easy to change and replace.
6.Omni energy conservation optimal design, low energy consumption, high efficiency, lower cost than coal furnace.
7.Fit environmental protection requirement standard, little pollution, and reduce labour intensity of workers.
Welcome to send us inquiry for forever plate heat treatment furnace

Description

Wear plate and cutting ring is the very important wearing parts in concrete pump, we can provide different sizes and brand Wear plate and cutting ring with good quality and prices.

Work with us you can get:

1. Ensured products quality, before shipping we have strictly quality control, if any quality problem we will solve the problem first and give compensation.

2. Reasonable prices, we promise the same quality products we give the best price, same price we provide the best quality products.

3. Professional service, all o ur staff are very professional of both products and exporting, you will save much time to work with us and no n eed t o worry about anything.


Price
Delivery Port : Tianjin
Packaging & Delivery
Packing :CartonDelivery Lead Time : 10 workdaysSupply Ability : 10,000sets/month

Place of Origin:Hebei, China
Brand Name:huicong
Model Number:Metal stamping
Material:Stainless Steel
Application:barbecue
Service:Customized OEM
Size:custom
Package:Carton
Surface treatment:Zinc Plating
Type:OEM Parts
Color:black

The printing production line of colored steel plate is a complete of production equipment for colored steel plate, and the process is as follows: make the steel coil strips be subject to surface degreasing, parkerising and passivating treatment, then apply multi-layer organic coatings (e.g., coatings of modified resin (SMP), high weather-resistant polyester (HDP), polyvinylidene fluoride (PVDF) etc.) on the strip surface by means of continuous roller coating, next, overprint multi-color patterns, and finally compound to form new functional plates. The production line is composed of equipment of uncoiler, sewing machine, tension machine, storage machine, degreasing and washing unit, roller-coating machine, printing machine, curing furnace, shear, coiler etc..

Cut to Length Machine(CTL Line) incorporate latest control technology ensuring the highest level of consistency to meet the demands of today's work place. we also have another coil process equipment, like slitting line .

Machine parameter


Type XH688 Floor deck
Feeding width 1000mm
Effective width 688mm
Thicknes 0.8-1.5mm
Size about 18000mm*1000mm*1200mm
Main Frame 300H steel
Weight about 14tons
Diameter of shaft Φ80, 45#steel
Material of roller 45#steel
Main motor power 18.5kW
Number of rollers 30 stand rollers
Control system PLC computer controller
Speed 6-8m/min
Chain 2 inches

The aluminum fins are embedded in a spiral groove about 0.25~0.5mm deep on the surface of the steel pipe, while the metal extruded from the spiral groove is rolled back to the fin root. This specialized manufacturing process is a hallmark of high-performance G finned tubes.

The biggest advantage of this G fin tube is that it has good thermal performance, the working temperature can reach 350-400, and the fin temperature can reach 260, and the maximum use temperature of G type finned tube is 350 as stipulated in GB/T 15386-94, the national standard of air cooler.

The disadvantage is that the fins and tubes of the two metals in the atmosphere are prone to electrochemical corrosion, poor corrosion resistance and high cost. The tube wall has stress concentration and cannot be used for medium and high pressure applications. If the pressure is not squeezed well (the edge of the spiral groove is not close to the aluminum sheet), its heat transfer performance is worse than any finned tube.

G-Type finned tubes, also known as grooved finned tubes or embedded-fin tubes, are one of finned tube types where the "G" stands for grooved. These tubes are formed by twisting a fin strip, typically made of copper or aluminium, into a machined groove on the outer surface of the tube. The fin strip is then back-filled to securely lock it in place, ensuring a tight fit. The base tube material is completely surrounded and filled by the fins.

The specific materials, dimensions, and groove designs of G finned tubes can vary depending on the application requirements and operating conditions. Factors such as fluid characteristics, operating temperature, and pressure influence the selection of materials to ensure optimal heat transfer performance.

In summary, G-Type finned tubes are a robust and effective solution for high-temperature heat transfer applications. Their grooved design and secure locking mechanism provide strength and durability, enabling efficient heat exchange and contributing to overall system performance.

Why G-type Finned Tube?
Grooved finned tubes offer several advantages. The grooved design significantly increases the surface area of the tube, enhancing heat transfer efficiency. These G type fin tubes provide excellent strength and durability, making them suitable for applications requiring high-temperature heat transfer. The tight fit of the fins ensures efficient heat dissipation or absorption.

Grooved finned tubes are typically made of materials like copper or aluminium. The selection of the material depends on factors such as the application requirements, operating temperature, and compatibility with the working fluid.

The grooved design of the fins increases the surface area of the tube, allowing for better heat transfer. This enhanced surface area facilitates efficient heat dissipation or absorption, leading to improved overall heat transfer performance.

Etched metal mesh

Specification: hole dia. Can be range from 0.08mm to 5.00mm and the thickness of material can be 0.1-1.5mm. And can produce according to any special design.
Material: stainless steel sheets, copper sheet, aluminium coil, alloy steel, galvanized steel and iron and so on.
Application: decorative sheet metal, toy electric etching foil, model etching foil, appliance, electronic factory, juicer filter, planer, name card, rating plate, golden card, silver card, raser, rerminal foil, integrated circuit lead frame, lead frames, semiconductor industry, telforn finishing, rf shielding, emi shielding , custom shields , decorative ornaments , grills, grids, sieves, and meshes.



Wooden pallet

1. OD:40*40-800*800mm
2. WT:4-40mm
3. Length:5.8-11.8m or as the customer's requirement
4. Standard: GB/T3054-2002,GB/T6728-2002,GB/T6725-2002,GB/T3094-2000,JIS G178-2005,JIS G3466,ASTM A500,DIN EN10210,ETC
5. Material:Q195-Q215,Q345,20#,alloy steel,ST37-2,ST42,ST52-3,S235,S355,A500,A106,A53,A36,ETC
6. Productive technology:cold drawn
7. Application:construction industry,steel structure work,shipbuilding,chemical machinery
8. Payment:L/C,T/T
9. Delivery time:15-30 days after receive the deposit
10. MOQ:10 MT
11. Packaging: painting, oil, packed by steel strip into bundles
12. Trade terms: FOB,CIF,CFR.


Packaging: painting, oil, packed by steel strip into bundles.

1. Product name: ERW/LSAW steel pipe
2. OD: 17-1200mm
3. WT: 4-20mm
4. Length: 5.8-11.8m or as the client's requirement
5. Standard: GB/T13793,GB/T14291,GB/T3091,ASTM A53,ASTM A135,ASTM A513,ASTM A671,DIN 1626,EN 10217,BS1387
6. Material: Q235,Q345,20#,A106,A53,A500,ST37,ST52,S235,S275,S355
7. Application: chemical fertilizer pipe, fluid delivery,container skeleton,machinery,construction industry,etc.
8. Productive technology:erw/lsaw
9. Packaging: painting,oil,packed by steel strip into bundles
10. Payment: L/C,T/T
11. Delivery time:15-30 days or as the quantity
12. Port: Xingang,China
13. Trade terms: FOB,CIF,CFR
14. MOQ:10 tons
15. Productivity: 6000 tons/month.

Seismic Cable: 6 Channel seismic cable with KCK screw fit female takeouts as per attached drawing, interval 0.8m with 0.8m at one end. Total length 4.8m,cable O.D.8.5mm,27 cores. No connector.

Seismic Cable -A 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with NK-27-21C Female connector(equivalent) at each end, total seismic cable length 130m.

Seismic Cable -B 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with 61-pin Bendix connector PT06-24-61S(SR) Female (equivalent) at each end, total seismiccable length 130m.

Seismic Cable: 12 channels. geophone cable with NK27 female connector at each end, spacing with molded split spring take-out, interval 3m, lead-in 3m at each end. total cable length 39m.

Seismic refraction array,12 channels,5m between channels, ordinary split spring take outs and terminated with NK-27 Female adaptor at each end. Lead in 5m at each end. Total array length 65m.

Seismic Cable 24 channel with 1m takeouts ( molded split plate takeouts )- Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.

Seismic Cable 24 channel with 1m takeouts (kooter male, connection parallel to the cable) - Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.

Seismic Cable: 6 Channel seismic cable with KCK screw fit female takeouts as per attached drawing, interval 0.8m with 0.8m at one end. Total length 4.8m,cable O.D.8.5mm,27 cores. No connector.

Seismic Cable -A 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with NK-27-21C Female connector(equivalent) at each end, total seismic cable length 130m.

Seismic Cable -B 12 Channel of 10m of Geophone's channel separation, Mueller Clip take-out, lead-in 10m at each end and terminated with 61-pin Bendix connector PT06-24-61S(SR) Female (equivalent) at each end, total seismiccable length 130m.

Seismic Cable: 12 channels. geophone cable with NK27 female connector at each end, spacing with molded split spring take-out, interval 3m, lead-in 3m at each end. total cable length 39m.

Seismic refraction array,12 channels,5m between channels, ordinary split spring take outs and terminated with NK-27 Female adaptor at each end. Lead in 5m at each end. Total array length 65m.

Seismic Cable 24 channel with 1m takeouts ( molded split plate takeouts )- Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.

Seismic Cable 24 channel with 1m takeouts (kooter male, connection parallel to the cable) - Single 61pin Bendix (PTO6A-24-61S) end connector suitable for use with a Geometrics Geode seismograph. Single end connector lead-in 10m with the other end terminated.

HI CHROME IRON CASTINGS custom slurry pump Accessories slurry pump Frame plate liner
Not only Hebei Jishiyu Pump Co., LTD can produce the spare parts of the slurry pump,but also can produce OEM parts made from hi chrome alloy and Ni Hard used in mining industry as per the customer's drawing and requirement.
Hebei jishiyu Pump Co., Ltd. is the leading manufacturer and supplier of slurry pumps, desulfurization pumps, dredge pumps,multistage pumps, sewage pumps in China.Not only does JISHIYU PUMP offer pump products, we also provide pre-sales solution, on-site service, spares and after-sale support.
For more information on pumps, please click here.

A. Structure of accordion covering:
(1)plus material: nylon cloth or protective cloth
(2)support: pvc sheet
(3)connecting plate: resin plate, iron plate

B. Resistence: endure high temperatures, oil and cooling fluid
The highest temperture: 4000 ' c
The speed can up to 200m/min

C. Mounting: it can be mounted in either way, intemally or externally or vertically or horizontally.

D. Design parameters for accordion covering:


Standard