Find Verified Laboratory Equipments Instruments Suppliers, Manufacturers and Wholesalers

Material
1.PP; 2. SMS; 3. PP with PE film

Weight
20g, 25, 30g, 35g, 40g, 45g, etc

Style
Knitting cuff/Collar with tie/Collar with hook and loop/Waist with belt

Size
115*137cm or other sizes

Color
White, Blue, Yellow, Green, etc

Packing
1pc/paper- sterile plastic bag, 50pcs/carton

OEM
Material, LOGO or other specifications can be customized following to customers' requirements.

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Product Code Product Description

PRSD-1295 Laboratory Oven 50 lt., 220-240 V 50-60 Hz

PRSD -1300 Laboratory Oven 120 lt., 220-240 V 50-60 Hz

PRSD -1305 Laboratory Oven 250 lt., 220-240 V 50-60 Hz

PRSD -1310 Laboratory Oven 500 lt., 380 V 50 Hz

PRSD -1315 Laboratory Oven 700 lt., 380 V 50 Hz

STANDARDS: EN 932-5, 1097-5; ASTM C127, C136, D558, D559, D560, D698, D1557, D1559 BS 1377:1, 1924:11; UNE 103300


PARSROS * PRSD Series Laboratory Ovens have been designed for drying asphalt, soil, rock, concrete, aggregate or similar materials. 50, 120, 250, 500 and 750 liter capacity models are available. Temperature range is from ambient to 200°C. The interior is manufactured from stainless steel and the exterior is robustly constructed from sheet steel finished in powder coated paint.

All models are fan circulated (forced convection), fitted with direct reading digital control unit and equipped with an analogue overtemperature protection thermostat. Laboratory Ovens are supplied complete with 2, 3, 4 or 5 shelves according to the capacity.

Product Code Internal Dimension External Dimension Weight (approx.)

PRSD-1295 410x350x360 mm 580x600x570 mm 20 kg

PRSD -1300 610x500x400 mm 770x750x650 mm 56 kg

PRSD -1305 800x600x570 mm 970x840x790 mm 85 kg

PRSD -1310 1100x790x580 mm 1401x920x770 mm 130 kg

PRSD -1315 1400x890x570 mm 1600x1130x770 mm 170 k

TC Instrument

Your Gateway to Quality and Reliability:
My commitment is to provide a seamless and trustworthy experience for clients seeking excellence in the products I represent. I prioritize quality, reliability, and transparency in every transaction.

Let's embark on a journey of international business growth together! If you're looking for a reliable partner in the fields of medical equipment, pharmaceuticals, basmati rice, automobile parts, or gemstones, feel free to connect. Your success is my priority!

Reactors are designed, manufactured and supplied in accordance
with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of
reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage

Types ofreactors
Hydrotreate rs
Reformers
Isomerization reactors,

Technical specifications
Diameter: up to 5000 mm Nominal
pressure: up to 20 MPa
Wall thickness : up to 300 mm
Design fluid temperature: up to 550C
Material: single metal plated with corrosion resistant material, type
08�¥18�?10�¢, 0813, or other as required by technical design
Internals UOP, AXENS, RIFING, etc.
Service life : 30 years

Distributor NEEDed in Poland and Eastern Europe

Medical protective equipment:
1. Respirators and Masks
- FFP2 Respiratory protective mask without valve, 94 % filtration Europe certified: EN 149:2001+A1:2009 (Modul B und C2)
- Oral and nasal protection mask Medical device class I, not sterile, Non-woven, disposable
- Operating mask Medical device class II, sterile Non-woven, disposable
2. Infection protection goggles
3. Working clothes for nursing staff
Pants/cassocks for nursing staff in surgeries and clinics
Disposable protective gowns for staff and visitors
Surgical gowns
Protective suits
4. Corona Rapid tests

PLS contact me distributor needed!

We have also construction machines for sale please ask for more details
like used excavators,roller and cranes

PRS-A0450 : Laboratory Type Jaw Crusher, 380 V 50 Hz

PRS-A0460 : Vibrating Disc Mill, 220-240 V 50-60 Hz

PRS-A0470 : Knife Mill, 220-240 V 50-60 Hz

PRS-A0450, PRS-A0460 and PRS-A0470 are used for crushing aggregates, core samples or similar materials in the laboratory when smaller sample sizes are required for testing. Three models are available (see Technical Specifications) depending on different feed, output grain sizes and capacity requirements.

Technical Specifications

Product CodeMaximum Feed SizeOutput Grain Size

PRS-A0450 100x100 mm 0-8 mm, adjustable

PRS-A0460 10 mm max. 10 μm

PRS-A0470 20 mm 0.5 - 2.0 mm, by using suitable sieves

Product CodeDimensionsWeight (approx.)Power

PRS-A0450800x900x980 mm300 kg1500 W
(for all models)
PRS-A0460850x630x1050 mm350 kg

PRS-A0470450x530x710 mm75 kg

It is used for deferrization of ceramic raw materials and industrial raw materials, operation of ore enrichment also be used. In addition, it is used for cleaning of high-quality quartz, magnesite enrichment, evaluation of the beach or mineral sands,cleaning of limestone dolomite, cleaning of foundry sands, cleaning of refrakter raw material, enrichment of boron, enrichment of chromite, bauxite, feldspar cleaning, clay cleaning, glass sand cleaning.

A corrosion inhibitor is a chemical compound or substance designed to mitigate or prevent corrosion, which is the deterioration of materials, particularly metals, due to chemical reactions with their environment. These inhibitors work by forming a protective layer on the metal's surface, blocking or slowing down the corrosion process. Corrosion inhibitors find extensive use in industries such as manufacturing, oil and gas, transportation, and infrastructure to prolong the lifespan of equipment, pipelines, and structures, ultimately saving costs and ensuring safety. They play a crucial role in safeguarding the integrity and functionality of metal components exposed to corrosive conditions, such as moisture, chemicals, or extreme temperatures.

Zoll AED 3 Defibrillator, Fully Automatic / Semi - Automatic
The ZOLL AED 3 defibrillator leads the way with Real CPR Help technology, which provides real-time feedback to guide rescuers in delivering high-quality CPR. The innovative, intuitive design and enhanced features of ZOLL AED 3 will give unexpected heroes both the confidence and the knowledge needed to treat a Sudden Cardiac Arrest.

More powerful full-colour images with touch screen and a CPR cycle timer, combined with voice and text prompts, help guide responders through the rescue.

Zoll AED 3 uses universal CPR Uni-padz electrodes meaning that child electrodes are not required to be bought separately and one thing less to manage.
Features
Enhanced Real CPR Help, featuring a full-colour display with vivid rescue images, CPR cycle timer, and a large colour bar gauge that shows CPR compression depth.
CPR Uni-padz electrodes can be used on both adult and pediatric patients. Simpy press the button and to activate the child mode.
RapidShock analysis allows the ZOLL AED 3 to deliver a shock, if needed, in as little as 5 seconds. Minimising the pre-shock pause and providing more CPR can improve patient outcomes.
Optional cloud connectivity that can automatically report AED readiness and the ability to quickly access and transmit cardiac arrest event data to medical professionals.
Incorporates a smart battery that can report its power level status on the device's LCD screen or transmit it automatically over WiFi to your AED programme management solution.

1 tube system
Combined bellows and gauge tube
Easy one-handed use
Trigger button or screw valve pressure release
Rotating head for left or right handed users
54mm dial for easy reading of pressure values
Push on tube connection (no adaptor required)
Supplied with an adult black nylon calibrated cuff
Zip-up pouch for convenient storage
1 year guarantee
Subject to the qty. price is negotiable.
UK Export.

1 tube system
Combined bellows and gauge tube
Easy one-handed use
48mm dial for easy reading of pressure values
Push on tube connection (no adaptor required)
Supplied with an adult black nylon calibrated cuff
Zip-up pouch for convenient storage
1 year guarantee
Subject to the qty. price is negotiable
UK Export.

2 tube system
Separate bellows and gauge tubes
Spring loaded clip-on rear of dial for one-handed use
48mm dial for easy reading of pressure values
Push on tube connection (no adaptor required)
Supplied with an adult black nylon calibrated cuff
Zip-up pouch for convenient storage
1 year guarantee
Subject to the qty. price is negotiable
UK Export

# Callipers Measuring range of 0-1000 mm;
# With and without fine tunning;
# Material – constructional or stainless steel;
# Mat chromed scale;
# Reading – 0.1 and 0.05 mm.

# Special callipers 3-point vernier calliper;
# 5-point vernier calliper;
# Marking-off vernier calliper;
# Weld seam gauge;
# Other types.

# Vernier depth gauges Measuring range of 0-500 mm;
# Reading 0.1 and 0.05 mm;
# Material – constructional or stainless steel;
# Mat chromed scale.

# Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm;
# Reading – 0.01 mm;
# Measurement reading surface of hard alloys (carbide).
Range 0-25 mm.

# Coordinate small size tables One-coordinate;
# Two-coordinate;
# Three-coordinate;
# Stroke along the coordinate: 0-25 mm

# Measuring stands Type A2 – with magnetic switch at the base;
# Type A4 – with cast-iron base and T-shaped groove;
# Type B3 – with square-riffled table;
# Micrometer holder.

# Smooth gauges Plug gauges – one sided;
# Plug gauges – two sided;
# Snap gauges.

# Thread gauges Thread plug calipers – one sides;
# Thread plug calipers – two sides;
# Thread ring gauges.

# Smooth rings Reference rings;
# Setting rings
Range: 6-150 mm.

# Squares and rulers Flat squares;
# Squares with base;
# Checking rulers;
# Templates.

# Angle gauges Protractor with lock screw
Range 80x120 – 300x500 mm;
# Protractor with sliding rod
Range 120x240 – 300x500 mm Reading - 1°

# Marking-off tools (scribers) Straight scriber – one sided (with knurled handle);
# Bended tip scriber – two sided (with knurled handle);
# Trammel for tracing and marking with small base;
# Vernier caliper with two needles and fine adjustment;
# Height gauge with fine adjustment.

- Incontinence aids, orthopaedics, dressings, absorbent cotton wool for surgical and medical use and for cosmetic use; baby diapers.
- Disposable Medical Devices like needles, syringes, flow-sets, probes, catheters and many others.
- Pharmaceuticals, such as surgical gloves, bandages, products for wound management, incision films.

Barber Leather accessories, Bags, Kits

Beauty Instruments, Barber Leather Accessories, Bags, Kits

used kitchen equipment

WE supplies a wide range of Downholetools and equipments from internationally renowned manufacturers in Europe & USA who are ISO and API Certified.

Drill Bits
Drilling Tools and Products
Drilling Motors
Fishing Tools Intervention and Completion Tools
Borehole Enlargement
Service Equipment

Our Principle is the exclusive distributor and stockistof awiderangeDrilling Equipments & Spares from internationally renowned manufacturers in Europe & USA who are ISO and API Certified.

Sheaves
Drilling Block
Rotary Tables
Swivels & Swivel Joints
Cementing Hose
Mud Pumps
High pressure unions and Pressure gauges
Crown Block Assembly
Traveling Block & Hook Assemblies Hammer
Unions

The main description of the plant equipmet is:

1. Brew House Make & Capacity:
Steinecker1995 -1999
5 brews/d, 450-500 hl/brew. for 7000 kg malt, 3850 Raw grain
Cast-out quantity: 500 hl, 16,5° Plato
8 Brews/ 24 hours, annual capacity 0.85 Mhl
Controls are based on Siemens S5 and S7 PCS with, Botec Control system, PC Windows 2000 (Steinecker)
Laboratory yield = 97.1% (2.1.09 – 28.5.09, 837 brews)

The Brewhouse was installed in 1996 - 1999 by Steinecker to a high standard of control and automation and it contains the following main equipment:

Wet Conditioning Mill, capacity 20 tons/hour and it is fully overhauled 2008

Configuration, main characteristics:
1 wet mill plant: 20 t/h
1 mash tun kettle plant: V=550 hl
1 lauter tun plant: D=7200mm
1 weak wort tank: V=155 hl
1 pre run vessel: V=640 hl
1 CIP- water distributor
brew/whirpool kettle hot wort max. 520 hl (1 brew / 5 hours)
wort cooling 400 hl/h, 10°C

- Mash Kettle, a jacketed vessel 550 hl
- Enzyme Dosing pot and pump
- Lauter Tun complete with spent grain tank and Pondorff pneumatic grains transfer. Tun capacity 814 Hl and diameter 7200 mm, Solids capacity of 7000 kg malt and 3850 kg raw grain. Complete with internal rakes and scrapers
- Pre Run Vessel complete with internal heater , volume 640 hl
- Wort Boiler/ Whirlpool, gross volume 757 hl net 520 hl
- Wort Cooler with aeration – GEA supplied plate heat exchanger (YOM 1990) – rated at 450 Hl/hr cooling the wort from 95oC down to less than 10oC. Cooling achieved with brewing water and then chilled water. Aeration achieved by use of a sintered disc and static mixers, and controlled manually using mass flow meters
- 2 Hop Pellet Tanks
- 2 Hop Oil Tanks
- Brewhouse Weak Wort Tank, volume 150 hl
- Alfa-Laval Decanter, year 2008, capacity 100 hl / h
- 2 Weak Wort Tanks, volume approx 80 hl each
- Gypsum Tank, volume approx 40 hl
- Wet starch tank – volume 100 hl
- Spent Grains Silo
- Spent Grains Drying System
- Bulk Acid tank – plastic tank with integral bund and dosing pumps

Scissor Tc Instruments 01

Ingersoll Rand offers a full range of compressor and dryer packages designed specifically to provide clean, dry compressed air for process and instrument air applications. Instrument and Service Air (IA & SA) equipment is used in a wide range of industries, from power generation and oil and gas, to chemical and manufacturing.

Instrument and service air systems generally consist of compressors, dryers, filters, receivers, coolers, and control systems. These work together to provide stable and reliable air to a variety of plant consumers; some of which play a critical role in maintaining plant operation and safety. As a result, any equipment or systems need to be properly designed, and capable of producing the right quantity of quality air as required by users.

Ingersoll Rand can design instrument air packages with various compressor modifications to provide an optimum solution for your project:

Engineered-to-order solutions that can be supplied as per customer requirements.
Deliver the total package, including the PLC based controller.
Fully integrated with dryers, filters and piping, etc. in various custom installation types, including the container, skid, and supply of system components.
Reliability: we use high-quality components to ensure maximum performance over time according to customer requirements.
Provide the optimum solution, utilizing the best compressor working principles.
For use in safe areas as well as hazardous areas.
Deliver Simple â??Plug & Playâ?? Installation.
All of our instrument air packages can be engineered to meet global and local quality certificates issued by various institutions worldwide, including API 618, API 619, API 672, ATEX, IECEx, and others.

Ingersoll Rand can design the instrument air packages with different compressor modifications to meet the optimum solution for your project.

Product Code Product Description

PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine, 230 V, 50 Hz, 1 ph

PRS-KA0302 Cooling Recirculating Pump with Reservoir, 230 V, 50 Hz, 1 ph

PRS-KA0304 Diamond Cutting Blade, 230x2.5 mm thickness

PRS-KA0306 Double-Faced Cup Wheel, Ã? 200x16 mm

STANDARDS : ASTM D4543

The PRS-KA0300 Laboratory Core Trimmer and Cut-Off Machine is used for obtaining rock samples perfectly machined (cubes, prisms, etc.) from irregular rock or core pieces.

The PRS-KA0300 is supplied complete with a vice to hold irregular pieces firmly in place up to 70x140 mm approx. A second V shaped vice is used to cut cores to a maximum size 75 mm dia. x 140 mm height. Longer cores can be obtained by turning the samples upside down in the vice. It is supplied complete with a cooling water inlet.

The PRS-KA0304 Diamond Cutting Blade has a diameter of 230 mm, 2.5 mm thickness and the maximum cutting area is 110x70 mm. The speed of the blade is 3000 rpm.

The PRS-KA0306 Double-Faced Cup Wheel has a diameter of 200 mm and 16 mm thickness. It is used for finishing the sample ends parallel and at right angles to the axis.

The PRS-KA0306 Double-Faced Cup Wheel, PRS-KA0304 Cutting Blade and PRS-KA0302 Cooling Recirculating Pump with Reservoir should be ordered separately.
PRS-KA0300 and PRS-KA0302 for 60 Hz with 220 V or 100 V can be supplied.



Dimensions 730x1050x590 mm
Weigth (approx.) 100 kg
Power 1100 W

1-Elasticated hood and self-adhesive chin flap.
2-Stitched and overtaped seams.
3-Elasticated cuffs and ankles.
4-Zipper with self-adhesive double zip flap.
5-Thumb loob (For safety reasons, the use of the thumb loops is only recommended when double gloves are worn.)
-60 grams - All certificated CE - FDA - ISO - TSE

Turning tools with indexable carbide inserts Cutters with indexable carbide inserts.

Drills with indexable carbide tools High speed steel blanks for lathe tools.

Toolholders, collets and tips Live and dead centers for lathes.

Reduction sleeves Circular saws, hand- and power hacksaw blades.

Multidisk "SIGMA" clutches and brakes .

And many others by customer’s request.

Circular saws
Cutters
Cutter heads
Shank cutters
And many others by customer’s request.

PREMCLEAN DESCALER 900ml is a high-quality concentrated acid cleaner for descaling kitchen equipment. We export it at very competitive price to worldwide. We are manufacturing on contract customized cleaning & hygiene products for buyers, importers, distributors, agents, Ho.Re.Ca. suppliers, supermarket chains, hotel chains and governments from across the world. Contact us now a) to Request a Free Quotation b) Discuss a customized Retail or Industrial packing volume c) Discuss your requirements in Private Label products or d) Negotiate a manufacturing contract to produce your cleaning detergents and liquids at our modern factory in the EU, in Cyprus. PREMCLEAN DESCALER 900ml is a Superb Catering and Kitchen Equipment Descaling Cleaning Concentrated Liquid Solution for Professional and Household use.

ating line is delivered by Finnish Elmont Oy and it consist of 59 separate dipping tanks, 6 material handling cranes and related process and automation equipment. We have the dipping tanks and material handling cranes in our store for sale. Dipping tank materials are AISI 316, SS, PP, HST and PP. All tanks are 2200 mm long and 1250 mm height, widths varies from 450 to 1740 mm, volumes from 1213 to 4016 liters. All tanks are in good condition.

The cranes are designed for those tanks and we have 6 pcs of them. Cranes have 0.25 kW gear motors and control panels. Structure is made of steel and they are in good condition.

If you are looking for such equipment, please contact us and we are pleased to give you more deep information.

DNG PPEE: PERSONAL PROTECTIVE EQUIPMENT / WORK WEAR / SAFETY EQUIPMENT

Vegetable cleaning equipment-inspection table

Gym wall pads, Gym mats, basketball hoops
Wood covered with sponge and pvc fabric.
Sizes and types differs.
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Gym wall pads, Gym mats
Wood covered with sponge and pvc fabric.
Many colors are available. 18mm wallboard
ISWP05
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Gym wall pads, Gym mats
Wood covered with sponge and pvc fabric.
Many colors are available. 18mm wallboard
ISWP04
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Gym wall pads, Gym mats
Wood covered with sponge and pvc fabric.
Many colors are available.
ISWP03
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Gym wall pads, Gym mats
Wood covered with sponge and pvc fabric.
Many colors, sizes are available.
ISWP02
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Gym wall pads, Gym mats
Wood covered with sponge and pvc fabric.
Many colors are available.
ISWP01
Sponge differs according to price
Discount available for projects.
Request catalog and price list for more details

Warranty: 2 years
After-sale Service: Online technical support
Material: metal
Shelf Life:2 years
Instrument classification:Class II
Safety standard: none
Application: Cardiology

Good condition GEA Westfalia centrifugal separator used for molasses removal from fermented beer. The equipment has patented HydroStop solid discharged system that can be adjusted precisely and reproducibly to the specific solids concentration requirements of the process. This beer separator has continuous and self cleaning separation process and in beer filtration application this separator eliminates the need to use kieselghur.

Technical information:

Manufacturer: - GEA Westfalia Germany
Year of manufacturing: - 2002
Manufacturer's type: - SC 30-06-177
Capacity: - 4000 - 6000 liters / hour
Electric drive: - 18.5 kW
Bowl diameter: - 440 mm
Bowl speed: - 7270 rpm
Relative density of solids removed: min 1.4 kg/l
Relative density of suspension: max 1.2 kg/l
Particle size or removed solids: > 4.6 micron
Centrifugable solids: - max 5% v/v
Viscosity of free liquid: - 2.5 - 5.5

Used WWS EAUXYGEN TWO atmospheric water generator (made in France). Available in France.

Machine producing drinking water from air humidity, with no connection to the water network and only a power supply required. Suitable for remote sites, water-scarce areas, local authorities and temporary installations.

Key specifications:
- Type: drinking water generator from air humidity
- Make / model: WWS EAUXYGEN TWO (made in France)
- Exact version (1-500T / 2-500T): on request
- Output (manufacturer data): 500 to 3,000 litres/day depending on climatic conditions
- Water treatment: 3-stage filtration + UV-C treatment, remineralisation
- Air filtration: G4 + F9
- Water tank: 258 or 412 L depending on version
- Construction: aluminium frame and casing
- Connections: power supply only, no water network connection
- Condition / maintenance: on request
- Location: France
- Shipping: transport at the buyer's expense, Incoterm at the buyer's choice

Technical documents available on request.

Price: USD 111,020 per unit, EXW France. Transport at the buyer's expense; Incoterm at the buyer's choice (EXW, FCA, FOB, CIF... on request).

Contact: M. ATTAR, Le Monde Industriel, contact@lemondeindustriel.com

Ultrafine copper powder with purity range 99.9998-99.9999%. The official laboratory findings systematically verified an ultra-high chemical purity benchmark of up to 99.9999% while confirming a highly uniform microscopic particle size predominantly under 5 micrometers. The copper powder has a high quality, it is small and roundish in form and size and most important, it is very uniform. 95% of all particles having the same form and size.

10pcs/bag, 50pcs/box, 2000pcs/carton, carton size 51.5*39.2*42cm
N.w:6.12kgs
G.W:8.53KGS
Weight - 20+22+25gsm

Material
25g non-woven+ 25g non-woven + 25g Meltbrown Fabric+ 25g non-woven

Usage
Hospital, clinic, laboratory, dentist, daily use, sanding, sanding, cleaning, sawing, bagging, or other

Ply Type - 3 Ply/4 Ply

Colour - white/green/blue/yellow/black etc.

BFE >95&99%

10pcs/bag, 50pcs/box, 2000pcs/carton, carton size 51.5*39.2*42cm
N.w:6.12kgs
G.W:8.53KGS
Weight - 20+22+25gsm

Material
25g non-woven+ 25g non-woven + 25g Meltbrown Fabric+ 25g non-woven

Usage
Hospital, clinic, laboratory, dentist, daily use, sanding, sanding, cleaning, sawing, bagging, or other

Ply Type - 3 Ply/4 Ply

Colour - white/green/blue/yellow/black etc.

BFE >95&99%