Find Verified Studs Suppliers, Manufacturers and Wholesalers

Our ASTM A193 Industrial Studs are manufactured using premium-quality stainless steel, duplex steel, super duplex steel, Inconel, Monel, Hastelloy, Incoloy, titanium, and other high-performance alloys. Engineered for secure fastening in demanding industrial environments, these studs provide exceptional strength, corrosion resistance, and dimensional accuracy. Available in various thread types, lengths, and configurations, they are widely used in oil & gas, petrochemical, marine, power generation, construction, and heavy engineering industries. Every stud is manufactured in compliance with international quality standards to ensure reliable performance and long service life.

Specifications: ASTM A193 / A479, ASME SA193 / A479

Specification: DIN, ASTM, BS and all International Standards

Length: 3 mm to 200 mm

Studs Size: M02 to M33

Form: Threaded Studs, All Thread Studs, Continuous Thread Studs, Single End Studs, Double Ended Studs, Tap End Studs, Heavy Studs, Industrial Studs, Fully Threaded Stud, Special Studs, Self-Clinching Studs, Flush Head Self Clinching Studs, Hurricane Studs, Molded Type Studs, Weld Studs, Ball Studs, Fully Threaded Studs, Broaching Studs, Screw-in & Press-in Wheel Studs, Arc Weld Studs, CD Weld Studs, Collar Stud, Headed Weld Studs, Resistance/Projection Weld Studs, Anchor Studs.

Types: Fully Threaded, Reduced Shank, Double Ended, Single Ended

Grades :
ASTM-A-193 Gr.B-7
ASTM-A-193 Gr.B-7M
ASTM-A-193 Gr.B-16
ASTM-A-193 Gr.B-8
ASTM-A-193 Gr.B-8M
ASTM-A-193 Gr.B-8T
ASTM-A-193 Gr.B-5
ASTM-A-320 Gr.L-7
ASTM-A-307 Gr.A & B

Dimension: ANSI B 16.5

Threading & Thread Fit: ANSI B 1.1-2A

Size Range: Dia. 1/2" to 2.3/4", Length 50 to 500 mm.
Dia. M-12 to M-68, Length 50 to 500 mm

High Tensile Industrial Fasteners for High Pressure,
High Temperature & Low Temperature Services.

Studs

Studs

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends. The fully threaded studs have no head, are threaded along their entire length, and have a higher tensile strength. The thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread. These studs are usually fastened with two nuts and used with objects that must be assembled and dissembled quickly.

Double-end stud is threaded rods with equal thread length at both ends. Double-end studs are used for high-strength bolting. There is a different type of double end studs available in the market that has reduced shank diameter as designed for special bolting. Both ends have chamfered points, but round points may be furnished depending on the purchaser's requirement. Hallery offers double-ended studs according to the customer's given specifications and dimensions. According to the information given by the purchaser, the product is fabricated.

These bolts have their main application for pressure vessels, valves, flanges, and fittings for high temperature and pressure services, and other different purposes. we provide many different types of finishes, like - plain finish for ordinary applications hot-dip galvanized zinc plated.

Hitesh Metal is one of the most prominent and certified manufacturer and supplier of ASTM A193 B7 Stud Bolts. The Threaded B7 Studs are available in multiple coatings & platings. These B7 studs cover alloy steel and stainless steel bolting materials and fasteners which makes ASTM 193 B7-Studs suitable for high temperature and high-pressure application.

We manufacture B7 Stud bolts among our range of fasteners that are generally manufactured in particular diameter between 1/5 mm to 5 mm. We keep a large inventory of all standard sizes of B7 Alloy Studs. We also manufacture any custom size as per customers requirement.

These B7 Studs Specifications has been specifically designed to be used in pressure vessels, valves, flanges, and fittings. Our highly dedicated team of experts manufactures and processes the best quality of Grade B7 Studs at our centre to export to many countries as well as for domestic use.

We at Hitesh Metal have a complete line of ASTM A193 B7 Studs Bolts and ready to sell stock of all other types of fasteners at a very competitive price. Contact us on +91 9867071980 to request a quote OR Send us your enquiry for B7 studs at hiteshmetal@yahoo.com.

Available Coating & Plating for B7 Studs
Black Oxide B7-Studs
Plain surface B7-Studs
Hot Dip Galvanized B7 Studs
Zinc plated (Clear) B7 Studs
Yellow Zinc plated B7 Studs
Silver Cadmium plated B7-Studs
Yellow Cadmium plated B7-Studs
Xylan Coated B7 Studs
Mechanical Galvanized B7 Studs
If any of the form is not listed here, Please use the contact form to send us your requirement.

ASTM 193 B7 (AISI 4140) Chemical Composition
Element B7 (AISI 4140)
Carbon 0.38 - 0.48%
Manganese 0.75 - 1.00%
Phosphorus, max 0.035%
Sulfur, max 0.040%
Silicon 0.15 - 0.35%
Chromium 0.80 - 1.10%
Molybdenum 0.15 - 0.25

All Kind Studs And Precision Machining

Stud KE9102

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9101

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9110

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9109

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9108

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9107

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9106

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9105

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Stud KE9104

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Stud KE9103

Finish :
White
Black Power Coating
Self Color & Lacquer
Rustic Finish & Lacquer
Oil Rubbed
Oil Black

Size :
7.5" X 6.5"
5" x5 "

Glass Stud

Product Description
METRIC: M6 , M8 , M10 M12, M14, M16, M18, M20, M22, M24, M27, M30, M33 M36, M39, M42, M45, M48, M52, M56, M64, M72 INCH SERIES: 1/4, 5/16, 3/8 7/16, 1/2, 9/16 5/8, 3/4, 7/8, 1, 1.1/8, 1.1/4, 1.3/8, 1.1/2, 1.5/8, 1.3/4, 1.7/8, 2, 2.1/4, GR.B7 ,B7M,B16 GR.A307 GR. A & B GR.L7,L7M, GR.660 (ENCONEL STEEL) B8,B8 CL-2

Price of product ( USD price or FOB price) :
USD 1600~USD 2300 Per MT

Product origin :
Ludhiana Punjab,India

Key Specifications/Special Features :
"DIMENSION-ASME B18.2 ASTM A193 ASTM A307 ASTM A320 ASTM A453 HOT DIP GALVANISED : IS 1367 PT 13 IS: 4759 BS EN: 1461, ASTM A153 ASTM A123
BLACK PHOSPHATE: IS 1367 PT 12
ELECTRO GALVANISED : IS: 1367 PT 11 , IS: 1573
PTFE COATING: ASTM D:3294"

Minimum Order Size and Packaging details :
MOQ SIZE= 5 MT
Packing In Corrugated Box Or Gunny Bags Added In Wooden Pallet Or As Per Customer Requirement

Stud Bar

Thread Bar

Pump Shaft

Name - Full Thread Stud

Min Order - 10 pcs
Manufacture in Ahmedabad Gujarat India

Packing as per client require

Sample yes

Capacity 500000 pcs per month

Sample Cost buyer

Brand-Accurate

Hs Code - 7318

Key Specification-
1.Grade 4.6,4.8,8.8,10.9,12.9 (is,iso & din)
2.Grade b7,b7m,b16,l7,b8,b8m (cl2)
3.Material as per is i 367 part-iii
4.Material as per astm 193,astm a320 a307 a453

Key Advantage
1.Highly accurate in dimension and supply with certificate

Full / Half Threaded Studs

Half Threaded Studs

Full / half threaded studs (M16 to M90)

Half Threaded Studs

Full / half threaded studs (M16 to M90)

Product Details:
Minimum Order Quantity - 12 Number
Size - M6 M8 M10 M12 M16 M18 M20
Color - Black, Blue, Grey, Silver
Material - Brass, Carbon Steel, Iron, Mild Steel, Stainless Steel


Offering a wide range of MS studs that are made from superior quality raw material procured from reliable vendors. These can be customized as per our clients exact requirements. These are quality tested to ensure their long life.

Foundation Nut Bolt

roductHexagonal nut
BrandRenaissance Pipe Fitting Inc
SizesRefer the specification
ConditionNew
Rating43 based on 42 review
priceStart from 5 USD


RFP India is Indias wellknown manufacturer supplier and exporter of Hexagonal Nut which is a type of fastener with a threaded hole The most universal shape is hexagonal for alike reasons as the bolt head 6 sides offer an excellent granularity of angles for an apparatus to approach from good in tight spots but more and smaller corners would be exposed to being rounded off Other particular shapes exist for certain requirements such as captive nuts for unreachable areas and wing nuts for finger modification A wide variety of SS hexagonal nuts exists from household hardware versions to specialized industry


specific designs that are engineered to meet different technical standards


Dimension range
516 M6 up to 4 M100 for all grades
Stainless Steel Hexagonal Nut
304 B8 316B8M 316 L 316Ti 317 L 310 321H B8T 347H B8C SS 410 B6 904 L UB6 A453 GR 660 ABC amp D
Duplex amp Super Duplex Steel Hexagonal Nut
UNS S31803 1UNS S32205 F 51 UNS S32750 F 53 UNS S32760 F 55 UNS S31254 SMO 254
High Nickel Alloys Hexagonal Nut
Monel 400 Monel K 500 Incoloy 600 Incoloy 625 Incoloy 800H Incoloy825 Incoloy 718 Inconel X 750 Alloy 20 CB 20 Hastelloy C 276 Hastelloy C 22 HastelloyC4
Other Alloys
Titanium Gr 2 Titanium Gr 5 Aluminium Bronze AB 2 Phosphorous Bronze PB
Test Certificate
Mill Test Certificate as per EN 10204 31


nbsp
Types Of Hexagonal Nut




SS 310 310S Hexagonal Nut

Duplex Steel UNS S31803 Hexagonal Nut





Stainless Steel 304 304L Hexagonal Nut

Duplex Steel Hexagonal Nut



Stainless Steel 316 316L Hexagonal Nut

Duplex Steel UNS S32205 Hexagonal Nut



Stailess Steel 321 321H Hexagonal Nut

Super Duplex UNS S32750 Hexagonal Nut



Monel 400 Hexagonal Nut

Hastelloy C276 Hexagonal Nut



SS Hexagonal Nut

Steel Hexagonal Nut



Inconel 625 Hexagonal Nut

Alloy 20 Hexagonal Nut



CuNi 7030 C71500 Hexagonal Nut

CuNi 9010 C70600 Hexagonal Nut



ASTM A105 Hexagonal Nut

ASTM A350 LF2 LF3 Hexagonal Nut



Inconel 600 Hexagonal Nut

Hastelloy B2 Hexagonal Nut



SS 317 317L Hexagonal Nut

Super Duplex Hexagonal Nut



SS 347 Hexagonal Nut

Super Duplex UNS S32950 Hexagonal Nut



Monel K500 Hexagonal Nut

Hastelloy C22 Hexagonal Nut



Stainless Steel 446 Hexagonal Nut

ANSI Hexagonal Nut



Inconel 718 Hexagonal Nut

904L Hexagonal Nut



Incoloy 800 Hexagonal Nut

Titanium Gr 2 Hexagonal Nut



Incoloy 825 Hexagonal Nut

Titanium Gr 5 Hexagonal Nut

1. Nut clamp
2. Nail clamp
3. Shuttering clamp

1. Spring washers
2. Wave washers
3. Plain washers : m.S. , s.S
4. Lock washers : internal & external tooth
5. Copper washer

1. Wire rings
2. Wire clamps
3. Bottle holder
4. Any wire forming component

1. Snap rings
2. Circlips - external & internal
3. E-clips

Spring band clamps of dia 10 mm to 100 mm

A Kee Klamp is a structural pipe fitting commonly used in the construction of handrails and barriers. Fabricated installations comprise the fittings and separate tubing components, which can be sized on site

Bolts:
Hex head bolts , hexagon head screw , mushroom head squre neck bolts , t- head bolts , wing screw , eye bolt , lifting eye bolt.

Screw :
Pan head slotted screws , cheese head slotted screws , countersunk head slotted screws , countersunk raised head slotted screws , pan phillipse head screw , countersunk phillipse raised head screws , slotted cheese trim head machine screws , socket head allen cap screws , allen countersunk socket head cap screws , socket head shoulder screws , socket head cap screw low head , hexagon socket set screw with flat point , hexagon socket set scews with cone point , hexagon socket set screw with dog point , hexagon socket set screws with dog point , hexagon socket set screws with cup point , imprial socket cap screws .

Nuts :
Hexagon nuts , hexagon coupling nuts , hexagon thin nut , square nut , hexagon castle nuts , self locking nut , hexagon domed cap nuts.

Washer :
Plain washer , plain big od washer , plain small od washer , spring lock washer , spring washer heavy duty , tooth washer , serrated star washr , tab washer with one tab . , tab washer with two tab.

Stainless steel:
Astm / asme a 193 b 8( 304 )
B 8c( ss 347 )
B 8m( ss 316 )
B 8 t( ss 321 ), a 2 , a 4 // astm / asme a 194 b 8 ( 304 ) , b 8c ( ss 347 ) ,b 8m ( ss 316 ) ,b 8t ( ss 321 ).

Nickel alloy:
Astm / asme sb 160 uns 2200 ( nickel 200 ) / uns 2201 (nickel 201 )
Astm / asme sb 164 uns 4400 (monel 400 )
Astm / asme sb 425 uns 8825 (inconel 825)
Astm / asme sb 166 uns 6600 (inconel 600 ) / uns 6601 ( inconel 601 )
Astm / asme sb 446 uns 6625 (inconel 625)
Astm / asme sb 574 uns 10276 ( hastelloy c 276 )
Astm / asme sb 472 uns 8020 ( alloy 20 / 20 cb 3 ).

SuperKlean's new male 3/4" NPT x male GHT adapters were specifically designed to complement our existing fitting line by providing our customers with a method of converting our FGHT x hose barb swivel adapters into male 3/4" NPT x hose barb swivel adapters. As with all SuperKlean adapters, we offer them in both brass and 300 series stainless steel. Once attached to the above fitting, the user is assured a 360° 3/4" NPT x hose barb swivel adapter which prevents hose kinking.

Model # Description:
8-ADAPT-S3/4" male NPT x 3/4" male GHT adapter, 300 series stainless steel
8-ADAPT-B3/4" male NPT x 3/4" male GHT adapter, brass

SuperKlean's new FGHT x hose barb swivel adapters were specifically designed to complement our existing hose lines by providing our customers with a method of assembling hoses in order to attach them to existing male GHT outlets throughout plants. As with all SuperKlean adapters, they are designed with a 2" long hose barb for a safer and more secure installation. The 360° swivel adapters prevent hose kinking.

Model #Description:
8-FGHT3/4-SSwivel adapter (3/4" FGHT x 3/4" hose barb), 300 series stainless steel
8-FGHT5/8-SSwivel adapter (3/4" FGHT x 5/8" hose barb), 300 series stainless steel
8-FGHT1/2-SSwivel adapter (3/4" FGHT x 1/2" hose barb), 300 series stainless steel
8-FGHT3/4-BSwivel adapter (3/4" FGHT x 3/4" hose barb), brass & 300 series stainless steel
8-FGHT5/8-BSwivel adapter (3/4" FGHT x 5/8" hose barb), brass & 300 series stainless steel
8-FGHT1/2-BSwivel adapter (3/4" FGHT x 1/2" hose barb), brass & 300 series stainless steel

Bharat Spring supplies quality springs to chassis manufactures of Buses, Trucks, Trailers, Cars and Special vehicles.

The initial stages in Leaf spring manufacture are:
* Cutting of Spring steel Flats into required sizes
* Punching of the center hole
* End-cropping
* Tapering of leaves
* Eye-rolling

After these stages the leaves are ready for heat-treatment. This includes annealing, straightening and tempering. The leaves are shot-peened, which operation creates a surface tension, an improves fatigue strength. Before fitting the bushes, the eye of the main leaf will be bored to close tolerance. The leaves are then ready for assembly.

In this modern world, transport vehicles are required to carry heavier loads, so new lighter springs need to be developed. Bharat Springs need to be developed. Bharat Springs has risen to the occasion with the minimum parabolic leaf spring suitable for various suspension systems. It has very low internal fiction, as its springs assembly is considerably lighter.

Main advantages:
* Improved suspension
* Light-weight
* Long fatigue life

Bharat springs is a company with over 40 years of experience in the business of spare parts for the suspension of industrial vehicles.

Throughout all this time, we have gained the necessary experience to be able to offer our clients the widest range of top quality products as fast as possible.

For all these reasons, we have established, as well as a deserved reputation, a solid position in both domestic and international markets.

The manufacture of accessories for the suspension of industrial vehicles: mercedes, volvo, man, scania, bpw, ror...

Our factory's main products are first class stell u-bolts, this together with a good hardening and forging, are our basic rules for the manufacturer of a part which is so important and special for the correct operation of the suspension.

We manufacture nuts that are specially designed for all types of u-bolts with special heights and different threads according to the needs of each part.

Springs

Tension Springs

We are India based group of companies with ISO registration and exporting 100% of our products like leaf springs, trailer leaf springs, galvanized leaf springs, coil springs, ubolts, axles, rubber axles, couplers, galvanized couplers, hubs, jockeys and other trailer parts.

Screws

Stud Bolts

Used for modern industry for sealing fluid, chemicals, gas.
Types : CUT GASKET/SPIRAL
WOUND/OCTOGONAL/OVAL/JACKETED
MOC : CAF, NON ASBESTOS/SS 304/SS 316/
TEFLON/EPDM
Used for high pressure and low pressure for tightening the
flanges.
MOC : ASTM A 193 B5,6,7,16,B8/A 194 GR 3,6,2H,8

Backed by our in-depth industry expertise, we are offering superior range of Industrial Bolts to our clients, which is widely used in various application. Our range of industrial bolt includes Hex Bolts, Weld Bolts and Seal Lock Process Bolts. The wide array of industrial bolts is widely known for its features such as durable, resistant to corrosion and high tensile strength. Moreover, we provide our range in various specification includes:

Stainless Steel in grade ASTMA 182 F-304, 304H, 304L, 304LN, 316, 316H, 316L,316LN, 316Ti, 309, 310, 317L, 321, 347 and 904L
Carbon Steel in grade ASTMA-105, A-350 and LF2
Alloy Steel in grade ASTMA 182-F5, F9, F11, F12, F21, F22 and F91

Hub Bolt

We manufacture all types of Hub Bolts / Wheel Bolts / Wheel studs suitable for all Heavy and Light vehicles like Mercedes, Tata, Scania, Volvo, Man, DAF, Nissan, Isuzu, Hino, Mitsubishi, Toyota, Mazda etc.

Specifications:

Type: Round-head, Milled Head, D-type Head, Centre Head

Length: Min.-30 mm Max. - 180 mm

Dia Body: Min. -10 mm Max. - 40 mm

Dia head: Min. -15 mm Max. - 50 mm

Thread: Metric, UNF / UNC or BSF / BSW, Pitch - 1.0, 1.25, 1.50, 2.0, 2.5, 3.0

Material: M.S., EN-8, SAE-1541, 41Cr4, SAE-4140

Strength: 5.6, 8.8, 10.9 grade

Surface Treatment: Phosphating, Auto-Black & Zinc-Plating with White, Golden and Green Passivated

Nuts are available from sizes 2 mm diameter to 100 mm diameter. Bolts are available from sizes 5 mm diameter to 100 mm diameter. Whereas washers are available from sizes 5 mm diameter to 100 mm diameter. Nuts Bolts and Washers are available in various grades with different finishes and colors.