Find Verified Hydraulic Equipments Suppliers, Manufacturers and Wholesalers

Hydraulic oil

Frac Sand
What Is Fracking?

Fracking. We have heard the term, but do we know what it means Fracking is short for hydraulic fracturing. It's a method of extracting natural gas and oil from shale deposits deep within the earth. Water, chemicals, and sand are pumped into these shale deposits under very high pressure which causes the shale to fracture, releasing the natural gas and oil trapped within. The slurry of water, chemicals, gas, and oil are then slowly pumped back out, leaving the sand to hold the fractures open so the mixture can be removed. As the slurry of chemicals, water, sand, gas and oil is pumped back out of the ground, it is separated into its different components and stored in tanks.

Description
Frac sand gets its name from its use in hydraulic fracturing (fracking), a completion method used by oil and natural gas companies to produce natural gas, natural gas liquids, and oil from unconventional, low permeability reservoirs such as shale.

It is a high-purity quartz sand with very round grains. It is very durable and provides a crush-resistant material used in oil and gas industries for hydraulic fracturing (also called fracking).

Proppants used in the petroleum industry must meet very demanding specifications. The typical characteristics of high quality frac sand include:

High-purity silica sand a grain size that is perfectly matched to job requirements a round shape that allows it to be carried in hydraulic fracturing fluid with little turbulence durability to resist the crushing forces of closing fractures.
It comes in various sizes. It can be as small as 0.1 millimeter in diameter to over 2 millimeters in diameter. Most frac sand used in oil and gas industries are between 0.4 and 0.8 millimeters in size.

Why Frac Sand Makes a Good Proppant?

After the surface pumps are turned off, the fractures contract but do not close completely because they are propped open by billions of grains of it. This occurs when there is sufficient sand remaining in the rock to resist the force of the closing fractures.

Polypropylene is a Semi-rigid, Tough and crystalline thermoplastic produced from propene (propylene) monomer.

Translucent, good chemical resistance, good fatigue resistance, integral hinge property, good heat resistance and durable.

Applications:

Utensils, housewares, toys, cars, plastic pallets, sportswear, lab, medical equipment, packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like hinges and textiles.

Polypropylene is a Semi-rigid, Tough and crystalline thermoplastic produced from propene (propylene) monomer.
Translucent, good chemical resistance, good fatigue resistance, integral hinge property, good heat resistance and durable.

Applications:

Utensils, housewares, toys, cars, plastic pallets, sportswear, lab, medical equipment, packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like hinges and textiles.

LDPE Granules

Low-density Polyethylene is a thermos plastic made from the monomer ethylene. It is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components and various molded laboratory equipment. Its most common use is in plastic bags. Other products made from it include:

Trays and general purpose containers.
Corrosion-resistant work surfaces.
Parts that require flexibility, for which it serves very well.

We are providers of Mobile hydraulic ramps in Riyadh, Saudi Arabia .Dock shelters and Dock Seals are placed at the exterior of the doors opening & form a shelter between the loading bay and the lorry while the loading or unloading of the material is taking place.

The primary use of clinker is to manufacture cement. Cement is used in construction to make concrete as well as mortar and to secure the infrastructure by binding the building blocks. It is also used for water-proofing, filling or sealing gaps, and making decorative patterns.

Solid board regular type is available in several thickness and edges to meet the construction needs. It contains a non-combustible gypsum core that accommodates a variety of decorative finishes after proper surface preparation.

Standard sizes and shapes:
Thicknesses: 12.5, 15 & 16 mm
Width: 1200 mm
Length: 1830 mm, 2400 mm & 3000 mm
Edges: squared & tapered
Other thicknesses and lengths are available at request.

Premium Natural Marble & Travertine Slabs Available in Bulk Quantities

We offer a wide selection of premium natural marble and travertine slabs, suitable for commercial, residential, hospitality, and high-end architectural projects.

Product Specifications:

Material: Natural Marble & Travertine

Thickness: 20 mm (2 cm)

Surface Finish: Polished / Honed

Unit: Square Meter (SQM)

Available Quantities: Bulk Stock

Different Colors, Patterns and Natural Veining

Available Marble & Travertine Varieties:

Volakas Arabesque, Volakas Haemus, Statuario T Vena Fina, Statuario Venatino Extra, Bianco Statuario Silver, Blue Cohiba, Thassos Vein A1, Pirgon Arabesque, Pirgon Select, Pirgon Alas, Bianco Gioia, Alpine White, Bardiglio Dark, Bianco Neve, Montclair Premium, Striped Grey, Volakas Haemus Diagonal, Zebrino Fantastico, Beige Bronzetto, Travertine Noce V.C and Travertine Super White.

Applications:

Flooring and Wall Cladding

Luxury Hotels and Residential Projects

Commercial Buildings

Interior Decoration

Countertops and Architectural Features

Competitive pricing available for bulk purchases.

Detailed material photographs and stock quantities are available upon request.

Please contact us with your required material type, quantity, and delivery destination for a customized quotation.

It is used in mortar for plastering, masonry work, pointing, etc.
It is used for making joints for drains and pipes.
It is used for water tightness of structure.
It is used in concrete for laying floors, roofs and constructing lintels, beams, stairs, pillars etc.

Limestone

Quartz Pebbles

Gray Crushed Marble

Quartz Pebbles

Description
Packaging Size: 35 kg
Color: White
Packaging Type: PP Sack Bag
Density: 2.65 g/cc
Purity: 99%

Resolution2 Megapixel (1080p)
Two Way AudioYes
Dimensions 224 mm (8.8 in.) x 299.4 mm (11.8 in.)Mount Type Pendant Camera Type PTZNight VisionYesAngle Of View2.3° to 64.7°Night Vision DistanceNon InfraredOptical Zoom30XLens TypeMotorized ZoomDigital ZoomYesImage Sensor TypeCMOS Durability
Vandal Resistant, Weather Resistant Temperature Range 0% to 100% RH, condensing
Compression H.264, H.265, JPEG, M-JPEGPower Consumption51.0 W / 54.0 VA

Bowling equipment.

Complete line of gym and fitness equipment
Cardiovascular equipment
Strength equipment
Aerobics equipment and
Accessories

Complete line of gym and fitness equipment
Cardiovascular equipment
Strength equipment
Aerobics equipment and
Accessories.

Sports equipment.

Hotel equipments

Standard

PVC overlay: lamination of decorative PVC foils on MDF, Plywood, gypsum boards, and other cellulosic fiberboards.
Suitable to bond BOPP and polyester film on similar wooden or cellulosic boards, Side Gluing/folder gluing of cartons and corrugated boxes, Lamination of paperboards for multiwall

Fruit & vegetable tubular sleeve, roll, 54cm wide, 4.80gm/lm, red, 1500lm/roll

40,000 tons available of used pipe lines .
The pipes from ARAMCO .( SAUDI PETROLIUM CO)
It is used PIPES .

Garnet Stone(Decoration)

Bazalt Stone

Volcanic Tuff/ Red Pumice

Msb hydraulic breakers from korea

Hydraulic testing machine.

Description

Fluid Systems Gravel and water filter pebble is composed of sub-angular, hard, durable, and dense grains of predominately siliceous material. Extracted from a clean glacial deposit, Fluid Systems Minerals Gravel and Pebbleâ??s physical properties make it among the finest available in the world for water filtration applications. Fluid Systems water filter gravel is washed, kiln dried, and screened to meet exact in g specifications with strict adherence to quality control. Sand and gravel make good water filters because they form permeable layers. When comparing the rate of flow between different filters, it is generally found that the tighter the spaces in the filter, the slower the flow of water. These small spaces cause tiny dirt particles to be trapped in the filter media.

Description
Sand is the most important ingredient for an equestrian surface; however, not every kind of sand is suitable for riding arenas. Quarries across the country will have different names for their sands, and particle size, gradation, mineralogy, and shape will vary. The qualities of your sand will greatly affect the performance of your surface, such as being tight, loose, or just right; soft or hard; and how much dust is produced. Becoming familiar with these characteristics will help you determine a solution for adding additives, improving an existing surface or building a new arena, and maintenance. Be sure to use the recommended specifications and sizes to determine what sand you will need .

Silica sand for horse tracks and equestrian arenas at BMS FACTORIES (Gharbalh industrial company ) 100% natural sand washed, sterilized and heat dried.It is distinguished by its natural color, practicality and high quality. Horse track sand is considered the best sand for its high porosity for rain water drainage, free from dust, impurities and bacteria. We manufacture all sizes of silica sand according to international specifications. silica sand for sports and landscaping at BMS FACTORIES for more information contact us

What type of sand is best for a horse arena?
High-quality equestrian grade silica sand should be sub-angular in grain shape, with a low clay and silt content. These important characteristics help to create a firm and highly stable arena surface, whilst also reducing dust and facilitating effective drainage. Using a silica sand that is not suitable for equestrian use is likely to result in an unsuccessful riding arena surface. Sand with a rounded grain shape is unable to compact sufficiently and creates a manege surface that rides deep; this greatly increases the risk of fatigue and injury to your horse.

How many tons of sand do I need?

For a square or rectangular area: Length in meter x Width in meter x Depth in meter. Take the total in meter cube and multiply by the sand density (Kg/meter cube) and the result would be in Kg. To change the unit to ton, take the result and divide it by 1000 as conversion to ton used in most countries. The result would be estimated amount of tons required.

Description
Marble Powder Calcium Carbonate is considered the second purest source of calcium carbonate in nature, where the percentage of calcium carbonate reaches 97% CaCo3. After the stage of mining and extracting raw marble from our quarries in the Kingdom, it is crushed in our crushers to get marble chips. Then sorting it from impurities, sifting it, and grinding it to get marble powder called calcium carbonate. It is used in many industries after being sifted and classified in our factories. It can also be used to equalize the pH to reach PH7 in water treatment projects.

It contains more than 19.5% of magnesium oxide and more than 29% of calcium oxide. It is less than 0.3% of silicon oxide, less than 0.7% of alumina oxide, and less than 0.1% of iron oxide, (or less than 0.03-0.04% of iron oxide for unpainted glass). Dolomite marble powder is added in sizes from 100-250 microns.

In the coating industry (paints), marble powder calcium carbonate is an essential material, as it forms from 30 - 40% of the paint components and is preferred over calcium carbonate powder due to its crystalline nature. The powder is included in the process of manufacturing paint as a filler to improve some of the paint's natural properties such as thermal resistance, thermal conductivity, density, controlling viscosity, preventing flow, reducing oil absorption, and increasing hardness, by combining it with particles of colored or adhesive materials to form a cohesive and stable material with a high flow. The granular size of the powder should not exceed 20 microns. Some of the paints used in exterior wall cladding require marble powder in sizes 0.3 to 1.2 mm.

In the plastics industry, marble powder is used as a basic material in the manufacture of many plastic products such as water and drainage pipes, electrical cables, some parts of electrical equipment, some auto parts, children toys, plastic bags, tableware food preservatives and dishes, decorations, and others. It improves the physical properties of the plastic product, it makes it resistant to deformation as it increases its hardness and resistance by increasing the modulus of elasticity. It reduces the thermal expansion coefficient, makes it have a good external appearance and soft touch, and keeps it from sloughing. In addition, it makes it easy to form by increasing its fluidity and dispersion and reducing production costs.

Cotton knitted gloves in gauge 7, 8, 9 and 10 in all sizes, excellent finishing. Pvc dipped gloves, split leather gloves with lining, rubberised cuff, single & double palm. High vibration drill gloves palm artificial leather, 4 mm gel for vibration, fire fighters gloves fire retardant, tpr finger protection kevlar lining inside, heavy duty multipurpose gloves synthetic leather with double layer, ce approved. We can also produce as per your design and color for any type of use.

Workers suits & coverall 100% cotton and also mixed with polyester in 240 gsm, 210 gsm, 190 gsm and 165 gsm as per required specification, design and color.

Aprons as per your quality and design. Hospital lab coats.

Road traffic safety items include solar barricade lights, emergency lights, solar arrow signs, solar road studs cat eyes and traffic signs.

Description
Gravel is used in Water Filtration with water treatment Filtration products Silica Sand, Anthracite, Activated Carbon, Birm, Pumice and Garnet in portable water treatment, surface water treatment, swimming pool water treatment, R.O. reverse Osmosis treatment plant and wastewater treatment also in conventional water treatment filters. Filter Gravel is an extremely effective filter media because of its ability to hold back precipitates containing impurities. Filter sand size, angularity and hardness are the important filter sand characteristics to ensure proper filtering. In slow sand filters, the gravel is normally on the bottom layer and is used as channels for filtered water to make it to the outlet lines. Sand will often plug the holes in the outlet pipe and the gravel helps prevent that. The primary role of the gravel in the bio-sand filter is to prevent clogging of the PVC pipe with sand. The first layer is sufficiently deep to cover the inlet to the pipe and should be large enough to keep the openings in the filter bottom free for the flow of water out of the filter, and the upper layer fine enough that the overlying filter sand will not sink into its pores.

Sand and gravel are used for road construction, for mixing with asphalt, as construction fill, and in the production of construction materials like concrete blocks, bricks, and pipes. It is also used to make roofing shingles, used on icy roads in the winter, for railroad ballast, and water filtration. The quarry is often where our gravel and other aggregates are excavated and where rocks such as sandstone and basalt are crushed down to size.

Sand blasting sand
Materials which can be Sandblasted:

Sandblasting Process
Glass
Stone
Metals
Wood
Plastics Steel
Brass
Aluminum
Silver
Materials Required for Sandblasting Process:

Abrasive Media grit size 80 grit around 0.007
Sand Produces free silica: cause of silicosis, a lung disease
Aluminum OxideLasts 30-40 X over sand.
Silicon Carbide Lasts at least 40-50X over sand.
Garnet
Glass Beads
Black Magic
Walnut Shells
Plastic Pellets

Description
Sandblasting is also known as abrasive blasting. Basically, it is the operation of forcibly propelling a stream of abrasive material against a surface. The sandblasting operation is done under high pressure to smooth a rough surface, roughen a smooth/Shape the surface to remove its contaminants. There are several variants of sandblasting process like bead blasting, Soda blasting and shot blasting. Before sandblasting, it is mandatory to know about its materials and the pros and cons. If your job profile is related to sandblasting or you owned a company that involved in the same process, you need to stay with us. In this article, we will discuss sand blasting machines materials and its pros and corns. But before it, let me also clear some of the details of its operation.

There are Two Types of Sandblasting Processes:

Water-Driven It is applied for reducing surface deterioration, most commonly water driven process is used for brick or concrete surfaces preparation.

Air-Driven This process is best suited for metal surfaces, to prevent moisture buildup and avoid water intrusion in the surface.

Sandblasting is the process of propelling abrasive by using the pressurized liquid or compressed gas as propellant. There are many generic terms for this process that is generally related to the sandblasting abrasive media used for this process. Here are the details of abrasive materials.

Description
Industrial Raw Quicklime Mineral also known as calcium oxide CaO is a term commonly applied to several related materials. Pure lime is calcium oxide CaO formed by burning a form of calcium carbonate such as limestone or marble CaCO3. Calcium oxide is a key ingredient for the process of making cement. As a cheap and widely available alkali. About 50% of the total quicklime production is converted to calcium hydroxide before use. Both quick- and hydrated lime are used in the treatment of drinking water. Quicklime is used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Talc, Volcanic Rock, Abrasives and Calcium Carbonate.

The quicklime products are often ground into a fine powder referred to as PULVERIZED QUICKLIME that is ideal for mixing with additives or other materials to result in specialized blended composites. Due to the chemical nature of some additives, the quicklime can become Fluidized, that is, having properties of being highly fluid. The fluidized quicklime is ideal for use with special material handling systems for optimum flowability and to avoid clogging. Quicklime can also be hydrated with water, in a process commonly referred to as slaking, resulting in HYDRATED QUICKLIME (or calcium hydroxide), a dry free-flowing powder product that is practical and efficient for many uses.

The relationship of quicklime and hydrated lime The word lime is also used to refer to calcium hydroxide and its chemical formula is Ca (OH) 2, and it is formed by the reaction of calcium oxide also with water. Calcium hydroxide is also known as hydrated lime, or hydrogenated lime while calcium oxide is known as quicklime. Both articles are rules.

There are a wide variety of uses for hydrated lime. It uses an auxiliary material for smelting in the production of iron. It is also used to purify aluminum, copper, and zinc, and remove the hardness of water by removing certain minerals from them. It also plays an important role in wastewater treatment. And we find many farmers spread lime in their fields to neutralize soil acidity. Homeowners also use it in their gardens to prevent algae growth. Lime helps hold soil in foundations of roads and runways. In the leather industry, it is used in tanneries to remove hair from animal hides. The mortar that is placed between the tiles or stones in the walls of buildings consists of a mixture of lime, sand, and water. It is also one of the most important components of gypsum, and one of the most important components of a type of cement called Portland cement.

Description
Marble Chips are metamorphic rocks formed by the alteration of limestone by heat and pressure. In its pure form, marble is a white stone with a
crystalline and sugary appearance, consisting of calcium carbonate CaCO3. Usually, marble contains other minerals, including quartz, graphite, pyrite, and iron oxides. It is used for its chemical properties in pharmaceuticals and agriculture. It is used for its optical properties in cosmetics, paint, and paper. They are used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Abrasives.

Marble is usually a light-colored rock. It is one of the most effective acid-neutralization materials. Being composed of calcite, marble has a hardness of three on the Mohs hardness scale. As a result, marble is easy to carve, and that makes it useful for producing sculptures and ornamental objects. After being sanded with progressively finer abrasives, marble can be polished to a high luster. This allows attractive pieces of marble to be cut, polished, and used as floor tiles, architectural panels, facing stone, window sills, stair treads, columns, and many other pieces of decorative stone. Marble chips work best when used in paths and patios as a substitute for gravel. Although gravel often is used as inorganic mulch around plants, marble chip mulch's reflected sunlight can be too intense for plants in full-sun locations. Today, marble is quarried all around the world and is used to create giant monuments, it is used in building, even down to applications as simple as kitchen counter tops. Itâ??s classified as a metamorphic stone, which means that it has changed composition over time from one type of rock to another.
Also used in:

Building Stone
Countertops and sinks
Floor tiles
Terrazzo marble chips mixed with concrete to form floors.
Tomb Stone

Outrigger pad (SAFEFOOT)-JACK PAD.

Outrigger pad (SAFEFOOT) Manufactured from 100% virgin ultra-high molecular weight polyethylene and approved by Saudi Aramcos safety Departments and all major industrial companies.
It is characterized by its high capacity to withstand temperature up to 180 ° C and high endurance.
These pads are used for Hydraulic cranes, civil defense equipment, concrete pumps, military equipment, generators and other uses.
All colors , shapes, various thicknesses and sizes are available as per our customers wishes.