Automatic access system with non-contact infrared thermometer and non-contact hand sanitizer.
Fever gate is a unique new Hungarian development, with the help of which patients with fever and possibly Coronavirus can be screened.
The access is operated by an integrated non-contact infrared thermometer,
which automatically allows entry to the Fever Gate between a body temperature range of 32 C and 37.5 C,
Above a body temperature of 37.5 C, it warns you with an audible signal and a red light and refuses entry.
In this case, the gate cannot be opened, only with the help of the built-in card access system.
Contents of the integrated Fever Gate system:
-Access gate with card reader
-Built-in infrared thermometer that can be operated completely contactless from a distance of 1-10 cm
-Sensory, completely non-contact, 1300 ml automatic hand sanitizer dispenser
Scalable, smart street lighting switcher with remote control and NB-IoT (Narrow-Band) Cat.M1 & LTE-M access
Cost-effective smart modem with lighting monitoring, remote and central switching control of street lighting units (street lamps).
Using a switch box and smart metering router â?? as one device.
The device is capable of receiving the P1 customer interface data of the WM-E3S electricity metering modems. Also counts switches and the amount of lighting hours, using daylight saving time â?? according to the current time zone.
The device is connecting via Narrow-Band mobile network â?? via OSLP protocol â?? to the server through secure authentication and it serves relay switch requests.
The lighting switch can be initiated remotely from the head-end centre, on-demand or in scheduled intervals (according the current daylight savi
ng). It provides reports from the daily events (immediately/pre-defined intervals â?? due to the local event storage feature).
Secure and future-proof solution, which offers reliable and efficient services due to central monitoring, control. Low investment solution, while decrease the outages, saving cost (optimize the lightin operation hours). You donâ??t need to mess with routers, control boxes anymore â?? maintain a clear and simple smart grid!
The scalable, flexible M2M Device Manager® provides remote management and monitoring features of the devices for the everyday operation of the street lighting, firmware updates, assures remote configuration for the devices.
Features
- Central switching for authorized persons only
- 4pcs relay for control (two switch modes)
- Light switching by schedules, depending on weekdays/sunset/geo-position â?? or by on-demand
- Event and operation monitoring and reporting
- Remote parametring, fw updates, reboot
- Supercapacitor against outages
- Security features
Application
- Energy service providers
- Utility companies
- Street Light providers
- Energy suppliers
- Smart Grid operators
- Lighting maintenance
- Smart city
Easy to configure wireless Narrow-Band/IoT pulse counter, voltage/contact signal transmitter with Modbus RTU, remote monitoring and output control for utilities, companies, industry
Cost-effective wireless pulse counter, input signal transmitter for industrial companies and utility providers.
It is receiving and counting incoming digital signals (contact/voltage/pulse) of connected meters (1 to 8 water or gas meters), measurement devices â?? through IO port.
The communicator is providing wireless data transmitting through the Narrow-Band mobile network to the data center.
Suitable for answering Modbus RTU request of a Scada system, where it is responsing meter count data towards to the centre.
It is also useful for remote monitoring of inputs (external device current status) and for output control (remote switch or gate opening).
Easy to configure (remote, local by a free tool), easy to use. The communicator can be accessed remotely.
The data evaluation on server side, where we offer our EMR Metering® platform. Remote management due to the M2M Device Manager®.
Industrial GPRS data collection device for digital signals of industrial systems and pulse signals of residential meters
Cost-effective, C-rail mountable industrial modem for receiving digital signals and collecting pulse signals of residential meters.
The modem is capable of continuously counting the pulse signals of up to 4 meter systems.
The device transmits the calculated input signal values through Modbus TCP protocol to query servers Modbus TCP.
The queries of the data sets are performed periodically (e.g. in every 15 minutes) depending on the server value set.
When it has to receive signals from more than 4 devices, we suggest using the M2M IO/RS485 CONCENTRATOR�® which has 32 input lines.
In this case the device requests the concentrator input counter status through the modems RS485 interface, and fowards the received Modbus RTU reply through Modbus TCP protocol to query the servers Modbus TCP.
The modem can initiate queries through its RS485 interface towards several concentrators input lines.
Furthermore, the modem can switch external devices (optionally) with the help of its 2 relay outputs.
Communication
Supporting GSM/GPRS (Gemalto�® industrial module)
4 inputs (digital or pulse/voltage)
2 relay outputs (optional)
Software/Configuration
Modbus protocol communication
Modbus Gateway
Consumption meter compatibility (receiving and counting pulse signals)
Configuration software (on RS232 or RS485 port)
Extras
Memory for storage of applications, data (with ftp possibility)
External IO-expansion (optional for receiving 32 inputs per module)
Firmware upgrades (ftp server)
Safety
External battery connection (spare power supply)
Watchdog circuit and system monitoring, log
Automatic mobile network connection recovery
Application
Data collection (digital or pulse signal)
Forwarding data of industrial systems
Smart metering (remote readout)
Measurement and data collecting systems
Remote monitoring of devices
Monitoring of input lines
Remote control (optional)
15 Remote Controls Suppliers
Short on time? Let Remote Controls sellers contact you.
Data concentrator with 32 digital inputs and Modbus RTU communication
Cost-effective industrial solution for reading out the data of consumption metering devices (e.g. water, gas, electricity meters) equipped with contact or pulse output line.
Furthermore, the concentrator can connect to any kind of measurement devices, PLCs, controlling machines, data collection system, automata or a network analyzer.
The device is capable of collecting and storing data of up to 32 endpoint devices through the input lines.
The M2M Modem Plus IO® device is connected through the RS485 port to read out the input values with Modbus RTU protocol.
Connection
32x digital inputs (4 segment x 8 isolable inputs, operation mode selection by jumper)
Receiving and counting the contact/pulse signals
Dry/wet contact relay
Open collector input
Receiving the output signals as input signals (alternate wiring)
Receiving reed/hall sensor outputs
RS485 output (ModBus RTU protocol towards the modem)
Software/Configuration
Modbus protocol communication
Readout of Modbus counters, registers
PLC compatibility
Configuration software (locally on serial port)
Security
Watchdog circuit and system monitoring
Data storage into non-volatile memory
Application
Data collection and counting
Measurement and data collection systems
Forwarding industrial system or PLC data
Monitoring industrial or measurement devices
Remote control
-NIOSH approved N95
-Meets CDC guidelines for Mycobacterium tuberculosis exposure control
-99% BFE (Bacterial Filtration Efficiency) according to ASTM F2101
-Fluid resistant according to ASTM F1862
-Respirator contains no components made from natural rubber latex
-Collapse resistant cup shape design
-Braided headbands, cushioning nose foam, and light weight construction for comfortable wear
Hellerdent white&go tooth whitening pen - portable practical tooth whitening pen for those who hasn't have time for waiting
1 min/day application
Clinically tested ingredients
Quick-dry
Hypoallergenic gel
In practical, small size package
After 14 application 4-10 shades visible whitening
Without tooth sensitivity and dentist's control
Description by Manufacturer
Aluminum Wire Scrap 99%
1.High quality with best price
2.Well reputation
3.Factory with strong supply ability
4. Prompt shipment
Applications:
1.mainly used for melting ingot
2.discontinuous melting with scrap
3.easy control and operation
4.fast melting
5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on
6. It mainly used for drawing back non-ferrous metal typical material is :wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
7.This aluminum can press that was pressed with our companyâ??s pressing machine.
Specifications:
Item
Test Standard %
Test result %
Aluminium InGOT
99.7%
Al
99.7%
99.75
Fe
0.20
0.195
Si
0.13
0.12
Cu
â?¤ 0.01
0.075
Ca
â?¤ 0.03
0.03
Mg
0.03
0.027
Zn
â?¤ 0.03
0.03
Mn
0.3
0.25
Packaging & Shipping
- Packing Standard export packing or as customers'require
- Delivery Lead Time Within 10 to 15 days after order has been confirmed
- Supply Ability 1500 Metric Ton/Metric Tons per Month
- Delivery Port
Chicken wing 1 grade. The process of manufacturing is under total control of state veterinary authority. It is a leading Russian producer of high-quality products, the vertical integration of which allows profitable and efficient development of agricultural production. It has right to supply its products.
This product has HACCP and ISO certificates.
Shelf life if frozen is 12 months. Temperature of storage is -18C.
Item specifics
Condition: Used Length: 20 ft
Height: 8 ft 6 in Width: 8 ft
Features: Lockable, refrigerated, watertight Price 4, 890 usd - 20â?? 7, 970 usd - 40â??
Location, this container is located at our budapest branch
Includes
- 460v 3 phase
- thermo king or carrier unit â?? (dependent on availability)
- swing doors
- well insulated
- temperature controlled
- aluminum interior
Price does not include delivery - please call for a quote
Refrigerated shipping containers are used for the storage of volume goods - suitable for perishable cargo such as vegetables, fruit, meat, etc. Excellent condition, refurbished exterior (if required) and operational, weatherproof, lockable, vermin proof structurally sound with serviced door hinges and lugs. (3 phase power). Temperature range is between -25 & +25 degrees celsius.
Container specification
Specifications: 20 feet refrigerated container 40 feet refrigerated container
Inside cubic capacity 28.4 mâ³ 67.9 mâ³
Cargo capacity 27, 280 kg 28, 390 kg
Tare weight 3, 200 kg 4, 600 kg
Dimension Length Width Height
20' feet refrigerated external 6.06 m (20) 2.44 m (8') 2.59 m (8'6')
20' feet refrigerated internal 5.45 m 2.29 m 2.26 m
40' feet refrigerated external 12.19 m (40') 2.44 m (8') 2.90 m (9'6')
40' feet refrigerated internal 11.46 m 2.29 m 2.55 m
Refrigerated door size 2.34 m 2.58 m
Versatile and professional LTE 450 router with WiFi, Dual-SIM and further expansion options
DIN rail mountable, versatile, wireless DUAL SIM industrial LTE router with WiFi, Ethernet port and several expansion possibilities.
The device uses the open source OpenWRT® operation system, supporting web admin interface.
The following expansion options can be chosen: RS232/RS485, Wireless MBus or IO-expansion.
Communication
Supporting the LTE 450 (450MHz Cat.4 module)
Usage of Dual SIM cards
WiFi (for the connected devices)
It can be extended with the listed modules
Self-developed expansion modules to integrate
Ethernet LAN/WAN
Software/Configuration
Easy to use open source OpenWRT® software
Opportunity for the developers to implement and use self-developed system or applications
The device can be parameterized on its web page by the local/remote interface
Firmware & software updates and parameterizing remotely by the M2M Device Manager® software
Security
System monitoring, auto restart mode
High availability
Extended tests during the development
Protection from network attack, traffic monitoring helps to reduce data usage
Application
Wireless data transmission, routing
Secondary/backup route
Industrial M2M machines (to a Scada)
Utility smart meters (remote readout)
Safety camera, DVR
DIN-rail mountable, universal 4G LTE router with wireless data forwarding capabilities, Ethernet port and industrial design.
The device uses the open source OpenWRT® operation system and provides web admin interface.
Communication
Supporting the 4G LTE Cat.3 (Telit® module)
Ethernet LAN/WAN
Software/Configuration
Easy to use open source OpenWRT® software with webadmin interface
Opportunity for the developers to implement and use self-developed system or applications
Firmware & software updates and parametrizing remotely by the M2M Device Manager® software
Security
System monitoring, auto restart mode
High availability and stable IP connection
Protection from network attack, traffic monitoring helps to reduce data usage
Application
Wireless data transmission, routing
Secondary/backup route
Industrial M2M and measurement, data collecting devices, PLCs (to a Scada)
Remote access, monitoring, maintenance
Utility smart meters (remote readout)
Safety camera, DVR
Copper powder ultradisperse ultrafine, 99.9999% purity
content of metallic copper - not less than 99.9999% by weight (controlled metallic
impurities 0.0001% by weight - Ti, Mo, Cd, Co, Be, V, Bi, Au, Pt, Li).
Isotope Content
Cu 63 - 69.09%
Cu 65 - 30.91%
Packaging: 2 kg/net in PET bottle
Quality Certificate available from IGAS research (Germany)
Quantity available: 1000 kg
SKR available.
Price: USD 17.00/gram
15 Remote Controls Suppliers
Short on time? Let Remote Controls sellers contact you.
